Used Hacker for sale (31)

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Ffedsrunu Ijpfx Adaew

Condition: like new (used), functionality: fully functional, We are offering an as-new HÄCKER chamber filter press Type 01.120 with a new control cabinet. Electrohydraulics with a double-acting cylinder. Equipped with new filter plates, which can be configured as needed for your application. Includes the following additional equipment: Ffjdjyhn H Tspfx Adasw - Automatic plate shifting device with automatic shaking system - Light barriers on both sides - Automatic filtrate drip trays Technical specifications: Condition: Demonstration unit, unused Plate size: 1,200 x 1,200 mm Number of chambers: optional, depending on plate pack and application Cake thickness: optional, depending on plate pack and application Capacity: 2,650 liters Filter area: 175 m² Operating pressure: 10 bar Drive power: 2.2 kW Discharge is open via a filtrate corner and a filtrate trough. We can also offer you a matching HÄCKER piston pump for this filter press. For further details or technical questions, please feel free to contact us at the provided phone number or email address at any time.

Condition: used, functionality: fully functional, We offer a factory-refurbished HÄCKER chamber filter press type 01.080 with automatic control. Electrohydraulics with single-acting cylinder Elevated design for positioning underneath tipping containers Control of the feed pump with automatic press-full detection. Technical data: Condition: used, factory-refurbished Plate size: 800x800mm Number of chambers: 40 Cake thickness: 25mm Volume: 500L Filter area: 44m² Feed pressure: 10 bar Open discharge via filtrate corner, with filtrate channel, drip plate available. We can also offer you a used HÄCKER piston pump to match this filter press. Fsdeyhnyajpfx Adasfw For further details and any technical questions, please feel free to contact us at the phone number or email address provided.

Condition: used, functionality: fully functional, We offer a factory-refurbished HÄCKER chamber filter press, type 01.080. Electrohydraulic system with single-acting cylinder Raised version for placement of tipping containers underneath Technical specifications: Condition: used, factory-refurbished Plate size: 800x800 mm Number of chambers: 40 Cake thickness: 25 mm Capacity: 500 liters Filtration area: 44 m² Operating pressure: 10 bar Ffodeyhnwlopfx Adaow Open discharge via filtrate spout, with filtrate trough and drip plates. We can also offer a used HÄCKER piston pump to suit this filter press. For further details and technical questions, please feel free to contact us at the provided telephone number or email address at any time.

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 400 x 400 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter surface 5m², dimensions 2500 x 700 x 1500 mm, weight 1000 kg, engine hydraulics, drip tray, filtrate, with or without filter cloths, piston pump incl. Piping with built Ffedpfx Adsfbbpqeaow

Condition: refurbished (used), We offer various piston pumps from Häcker, PP design, various sizes from 1 - 10 m3/h, up to 10 bar, cpl. overhauled Fsdpfxoikl Tps Adajfw

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t Fjdpfjihpg Ejx Adaofw

Condition: good (used), Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg Ffsdpfx Asdl E Iiedaow

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Knife for Weima, Large ..... Fedpfebxu Dhjx Adaefw For almost all common chippers / shredders From stock Bitburg Subject to prior sale

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Ffodpecbtpkofx Adaew Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: excellent (used), 2 knives Knife width: 35 cm Drum diameter: 125 cm Drum width: 25/7 cm Maximum material height: 13 cm Maximum material width: 33 cm Outlet: 25 cm Ffedpfx Adjx Tf E Ejajw Motor: 45 kW Transport width: 200 cm, height: 150 cm, length: 280 cm

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Equipment and technical data: - Motor: 18.5 kW - Rotor diameter: 248 mm Ffedpfx Asx H U Ngedajw - Hopper opening: approx. 620 x 800 mm - Standard screen - 30 cutting knives - Extraction nozzle: 160 mm Dimensions: approx. 1730 x 1160 x 1650 mm Weight: approx. 1100 kg Availability: short notice Storage location: 65439 Flörsheim

Condition: excellent (used), 37 kW motor 4 knives Fedpfx Asvc Atmedasfw throat 160x400 mm Roller motors 2x 1.3 kW Vibration motor 2.2 kW Vibrating chute with magnet, dimensions 1900x400 mm

Condition: excellent (used), Year of construction: 2006, Shredder in refurbished condition Slow-speed with walking floor Rotor width: 800 mm Large rotor diameter of 368 mm with 40 blades Motor: 22 kW Fjdpfxjx Dqz Re Adaofw The following parts have been renewed: Rotor bearings Gearbox bearings Gearbox oil Blades have been turned Screen: 20/25 mm V-belt

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Fedpoxavtdsfx Adaofw Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ V-rotor Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: Automatic star-delta starter Automatic shut-off in idle mode Vibration-damping machine feet CE compliant Availability: short-term Location: Flörsheim

Condition: refurbished (used), Year of construction: 2015, operating hours: 3,750 h, functionality: fully functional, power: 294.2 kW (400.00 HP), first registration: 10/2015, overall weight: 22,000 kg, color: red, operation weight: 15,000 kg, tire size: 26,5 x 650, loading space volume: 25 m³, total height: 4,000 mm, maximum speed: 40 km/h, working width: 2,550 mm, Equipment: additional headlights, hydraulic folding, trailer coupling, Greentec 962/20, a chipper combination with a high-tipping hopper with a capacity of 20 m³. Equipped with a Palfinger M70 crane, mounted on a 40 km/h chassis with a tandem axle and a K80 trailer coupling. The drum chipper unit was completely refurbished 500 hours ago with a new, current drum version (weight approx. 2 tons, blade system, 40 mm drum wall thickness, drive train designed for a maximum of 400 hp). All wear parts in the chipper area, as well as the brakes, have been completely replaced. Ideal for collecting material from streets and parking areas; there is space for the traffic control panel at the rear. Fsdswk N Ekepfx Adaofw Tires are in mint condition. Viewing in operation is possible and desired by arrangement!

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. Fedpfx Aeyr Tkfodaefw The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption

Year of construction: 2008, operating hours: 133 h, condition: used, JBM - Wood Chipper Type 630 MDX on Single-Axle Chassis / Car Trailer Ffjdpfxsyfr Dwo Adaew > Kubota diesel engine 44 kW (60 HP) > Sprung, braked single-axle chassis > Wide feed: 310 x 220 mm > Max. log diameter: up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight approx. 1,690 kg > Only 133 hours! > Year of manufacture: 2008 On request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted. = Further Information = Please contact Tobias Ebert for more details.

Condition: used, mileage: 36,686 km, power: 460 kW (625.43 HP), axle configuration: 8x8, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, EBS, air conditioning, = Additional options and equipment = - Brake system = Notes = For vehicle inquiries, Mr. Seidel will be happy to assist you (Tel. ...). Mercedes-Benz Arocs TUROX Eschlböck Biber 92 Body: Eschlböck Biber 92 Crane: Epsilon S110F104 Axle configuration: 8x8-4 Chipper operating hours: only 1,512h! Many pictures and videos available On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be glad to assist you. You will find more information on our website. ... Subject to errors, changes, and prior sale!!! • Particulate filter • Cab: Short-haul = Further information = Engine displacement: 15,569 cc Gross vehicle weight: 36,000 kg External dimensions: 0x2550x4000 Fodpeyfpx Eefx Adajfw Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2018, operating hours: 4,351 h, functionality: fully functional, machine/vehicle number: W09812219J2D38029, first registration: 10/2025, overall weight: 19,000 kg, color: orange, axle configuration: 2 axles, operation weight: 18,760 kg, empty load weight: 18,760 kg, tire size: 600/50 R22.5 166F, next inspection (TÜV): 01/2026, maximum speed: 80 km/h, drive type: Zapfwelle, number of previous owners: 1, load hours: 4,351 h, crane manufacturer: Palfinger, Equipment: ABS, additional headlights, chaff cutter, compressed air brake, crane, front power take-off, lighting, power take-off driven, trailer coupling, Fully developed hydraulic counter-cutter, developed together with Doppstadt on the vehicle and fully operational! Spare parts supply is ensured by Doppstadt as well as TCS Umwelttechnik GmbH, Austria. - 2-axle trailer - Length: 6,360 mm / Width: 5,039 mm / Height: 5,834 mm - Transport width: 2,539 mm / Transport height: 3,929 mm / Transport length: 6,414 mm - Required power: 250 – 370 kW - Chipping drum: 6 knives - Hardwood trunks up to Ø 480 mm, softwood trunks up to Ø 600 mm - Feed height: 950 mm / Feed width: 1,200 mm - Rotor diameter: 1,000 mm / Rotor width: 1,200 mm / Loading height: approx. 1,400 mm / Infeed width: approx. 2,000 mm - Variable feed speed / closed and robust chipping drum / simple design and maintenance Ffedpfx Ajxqgm Nsdajw - Variable knife protrusion and easy screen basket change for high-quality wood chips from P16 to P100 (G30 – G100)

Condition: excellent (used), Year of construction: 2023, operating hours: 368 h, functionality: fully functional, Pellet Plant EcoKraft LP22 – Complete Line with Bagging System – Year 2023/2024 For sale is an as-new pellet production plant consisting of two EcoKraft LP22 pelletizing lines including shredding, drying/extraction, screening, big bag system, and a semi-automatic bagging unit. Year of manufacture: Q4/2023 Commissioning: Q1/2024 Operating hours: Pellet press 1: 368 h Pellet press 2: 126 h Scope of supply: 1x Hacker HA1100 (22/30 kW) 1x Cutting mill SMC 500/700 (37 kW) 1x Extraction & filtration unit SMU60 2x Material bunkers MB3LPS (each 3 m³) 2x Dosing systems DS25 2x Pellet presses LP22 (each 24 kW) 2x Screening units with conveyor belt 20x Big bags incl. frame 1x Semi-automatic bagging unit AS900 (400 g – 60 kg, calibration-ready) Special features: ✔ Fully interlinked system ✔ Integrated metal separator ✔ Temperature monitoring & central lubrication ✔ Both big bag and sack filling possible ✔ Very low wear / few operating hours ✔ New price: €577,138 net Sale price: €395,000 net Including assembly, transport, commissioning, UVV (accident prevention regulation), risk assessment, and operator training—only within Germany, Switzerland, and Austria. Viewing by appointment possible. Fedpfjynzcuox Adaofw

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,500 h, fuel type: diesel, empty load weight: 17,000 kg, axle configuration: 2 axles, machine/vehicle number: HEM582Z, Equipment: hydraulics, trailer coupling, We are selling our Case 280 and Jenz Hacker 582 Z (year of manufacture 2011) due to switching to electric chippers. The chipper has 5,500 operating hours and the Case has 9,500 operating hours. Available immediately. Fedpex Hz Ivefx Adaefw

Condition: excellent (used), Year of construction: 2020, Hacker slow-speed shredder with powerful 45 kW motor, ideal for cables, plastics, and pallets. Rotor width: 1000 mm, rotor diameter: 368 mm. Fitted with 56 large knives (40 x 40 mm). Motor: 45 kW. Can be purchased with or without discharge conveyor (with overbelt magnet). Ffodpfx Ajykzy Eodaew

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 Fedpfx Asdv Eu Hedaefw - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2025, Wesetlintner Edge Sanding Machine Type: KSM 260 - Heavy-duty design - Oscillating sanding belt - 400 Volt / 3.0 kW, sanding belt 200 x 2600 mm Ffedpfxjx Aiugj Adaow Includes mitre fence and mobile base Includes 10 sanding belts: 5 x K80 and 5 x K120