Used Union Ti1800 for sale (166)

Condition: used, Technical details: faceplate diameter: 785 mm revolution per minute: 4,5 - 180 (Planscheibe) U/min Speed of boring spindles: 4,5 - 900 U/min. tool taper: SK50 weight of the machine ca.: 3,7 t space requirements of the machine approx.: 3,6x1,3x1,6 m spare part for a table type Boring and Milling Machine WMW BFT 130 with with headstock incomplete (as it can be seen on the picture!!) - diameter facing of a flange:0-1400mm - diameter for drilling: max. 800mm - diameter at face turning: 0-1400mm - spindle diameter: 130mm - drilling depth: 1000mm * Fpedpfx Apju Nk Ehs Don

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Fpjdpezk Npgjfx Ap Den Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 109 h, axle configuration: 4x4, mast type: telescopic, lifting height: 2,90,000 mm, overall weight: 3,750 kg, empty load weight: 3,750 kg, fuel type: hybrid, Equipment: all wheel drive, An authorized SUBARU dealer in Łaziska Górne has a professional FALCON FS290 spider lift from 2014 for sale. The machine was directly imported from Denmark from its first owner. Since new, it has only operated for 109 original operating hours, putting it in very good technical and visual condition. It has current inspection certificates issued in Denmark. This is a self-propelled, wheeled version, equipped with its own drive system and a reliable HONDA gasoline engine. The lift can move independently around the worksite and perform tasks without access to an external power source. The FALCON FS290 provides up to 29 meters of working height and a maximum horizontal reach of approximately 14 meters. At the same time, its minimum transport width is about 80 cm, allowing it to pass through narrow gates and standard door openings. This is an ideal machine for working in halls, warehouses, shopping centers, industrial facilities, churches, theaters, airports, and anywhere where a large reach is required in a limited space. Key information: Brand: FALCON Model: FS290 Year of manufacture: 2014 Operating hours: only 109 original operating hours Type: spider lift Fpedpoz Dh R Hjfx Ap Den Version: wheeled, self-propelled Gasoline engine: HONDA - power generator Number of owners: 1 Country of origin: Denmark Current inspection certificates issued in Denmark Technical and visual condition: very good Technical data: Maximum working height: 29 m Maximum platform height: approximately 27 m Maximum horizontal reach: up to approximately 14 m with a 100 kg load Horizontal reach with a 200 kg basket load: approximately 12 m Maximum basket load capacity: 200 kg Basket dimensions: approximately 1.40 × 0.80 m Transport length: approximately 6.30 m Minimum transport width: approximately 0.80 m Transport height: approximately 1.98 m Curb weight in standard configuration: approximately 3750 kg Turning radius: approximately 3.30 m Ground clearance: approximately 25–32 cm Slope climbing ability: approximately 5–15°, depending on the machine configuration Adjustable outrigger spacing The lift has adjustable outrigger settings, allowing the working area to be adjusted to the available space: Narrow setting: approximately 3.60 × 3.60 m Intermediate setting: approximately 4.60 × 4.60 m Wide setting: approximately 5.40 × 5.40 m Key advantages of the machine: Only 109 original operating hours One owner since new Powerful and reliable HONDA gasoline engine Self-propelled wheeled drive system Ability to move efficiently around the worksite Up to 29 meters of working height Horizontal reach up to approximately 14 meters Basket load capacity up to 200 kg Compact transport width Ability to pass through narrow entrances Adjustable outrigger spacing Low weight in relation to the achieved height Ability to work over obstacles Designed for indoor and outdoor use Current technical inspection certificates from Denmark Very good technical and visual condition We offer transport within the European Union. The stated price is net and applies to export and business customers. A substantial discount is possible for individual customers. Please contact us directly by phone to get your best price.

Condition: used, Year of construction: 2013, Operating hours: approx. 1550h, displacement: 6728cm³, power: 107kW, total weight: 16.5t. Including winch, work platform, high-pressure hose with reel, forks and lattice boom extension. A new rotary union is available as a spare part. An on-site inspection is possible. Fedpfjzx Eg Rjx Ap Djpn

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Fpsdpfx Asxq Exwep Don

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Model: Sprint International Fpedey Au Ubjpfx Ap Don Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. All components are complete.

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 100 mm, measuring range Z-axis: 1 mm, travel distance Z-axis: 550 mm, Mitutoyo roughness measuring machine Surftst SV 3100 H4 in very good condition measuring ranges: Z = 0,8mm (stage 550mm) X = 100mm Fodpsrdg H Uefx Ap Djpn Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 4.0 machine will be equiped with a very new roughness sensor (4mN) Overhauled measuring table (50x100mm) and self centering vice for € 2.500,-- on demand. Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union

Condition: used, Year of construction: 1999, plate width 2980 mm plate depth 3000 mm Fedpfjgxqvzox Ap Depn plate height 1400 mm total power requirement 11 kW

Condition: excellent (used), Mitutoyo contour&roughness measuring machine Formtracer CS 3000 H4 in very good condition measuring ranges: Z = 5mm (stage 350mm) X = 100mm Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 5.3 Overhauled measuring table (50x100mm) and self centering vice for € 2.000,-- on demand. Included are a lot of measuring tip (new price appx. € 3.000,--) Fpsdpfxop Ecg Re Ap Dsn Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Fpedpfexxv D Hjx Ap Djn If you have any further questions, please feel free to contact us!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Control system: Siemens 840 DsL Working area Travel in X: 450 mm Travel in Y: 270 mm Travel in Z: 310 mm Rapid traverse (X/Y/Z): 75 m/min A-axis Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Fodpfozf Admsx Ap Dspn Spindle speed: 200 rpm Equipment Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear

Condition: used, Year of construction: 1996, functionality: fully functional, 5/16" National Machinery Formax Model FX22M Two Die Two Blow Progressive Header Fsdpfjzt S T Hsx Ap Djpn

Condition: used, Year of construction: 1990, functionality: fully functional, Updated Electrics Scrap Conveyor Fjdpezt S Uwsfx Ap Djpn 2 Plane Straightener Multi Checker Unit

Condition: new, Year of construction: 2026, functionality: fully functional, SHEET METAL BEADING MACHINE ETB 40 – METAL TECHNICS POLSKA PROFESSIONAL SHEET METAL BEADING MACHINE The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. KEY FEATURES • Maximum sheet thickness: 4 mm • Powerful 2.2 kW electric motor • Heavy-duty steel construction • 300 mm throat depth Fsdpfx Aszkubzep Depn • Precise material guidance • Suitable for a wide variety of beading and flanging operations • Quick and easy roll replacement • Ideal for HVAC, tanks, enclosures, and steel fabrication • High manufacturing quality • Machine available from stock TECHNICAL SPECIFICATIONS • Model: ETB 40 • Maximum sheet thickness: 4 mm • Roller width: 165 mm • Throat depth: 300 mm • Roller speed: 15.3 rpm • Motor power: 2.2 kW • Dimensions (L × W × H): 1550 × 510 × 1180 mm • Weight: 341 kg APPLICATIONS The ETB 40 is ideal for manufacturing: • HVAC ducts and fittings • Air-conditioning components • Cylinders and tanks • Machine enclosures • Decorative sheet metal components • Flanges, reinforcing beads and stiffening profiles • Components for the automotive and steel fabrication industries HEAVY-DUTY CONSTRUCTION The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. EASY OPERATION The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. TRANSPORT & TECHNICAL SUPPORT We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. WHY CHOOSE METAL TECHNICS POLSKA? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.

Year of construction: 1962, condition: used, machine/vehicle number: 35701, height of centers: Werkstueck- bzw. Schleif-Ø 500 mm Fpodjz Hctspfx Ap Den distance between centers: ca. 2000 mm max. working piece weight: 1200 kg grinding wheel measures: 600 Ø x 300 mm grinding wheel rotations: 965 Upm electrical connection: 380 V, ca. 15 kW space needed: 2300 x 9000 x 2000 mm weight: 13000 kg

Condition: used, Mori Seiki MV45/45 machining center with Fanuc 11M control, travels X 820 / Y 555 / Z 550 mm, 4,500 rpm spindle (7.5 / 5.5 kW, BT 45) and Kitagawa 4th axis for simultaneous 4-axis machining. Professional through-spindle coolant retrofit by Deuschle Spindelservice — rotary union through the pull stud, hydraulic tool clamping with pressure intensifier, dedicated 15 bar pump switched via M50 — plus box guideways for exceptional rigidity, 2 mechanical gear stages delivering 200 Nm torque in low gear, and approximately 75 BT 45 tool holders (all with through-coolant passage) included. Fpjdpezy Svusfx Ap Den Box-guideway construction and 4-axis simultaneous capability make this a stable, versatile workhorse for complex parts. CNC CONTROL Controller: Fanuc 11M AXES Number of controlled axes: 4 Number of simultaneous axes: 4 X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa SPINDLE Max. spindle speed rpm: 4.500 Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 Gearbox stages / speed ranges rpm: 2 COOLING Coolant through spindle bar: 15 EQUIPMENT & OPTIONS • Box guideways (flat slideways) — very rigid, stable machine • 4-axis simultaneous: Kitagawa 4th-axis rotary unit, hydraulically clamped, fully integrated in the control • Spindle with 2 mechanical gear stages — high torque, 200 Nm in low gear • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 • Chip conveyor at the front, discharging to the right • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs • 4th axis (rotary table)

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, conveyor belt width: 520 mm, Technical specifications Product number: Fodpfx Aew H Tt Aep Djpn SK 9000 Year of manufacture: 2009 Machine dimensions: 900 x 1,740 x 1,700 mm (W x D x H) Belt width: 520 mm Weight: approx. 220 kg Protection rating: IP 69 Performance: 12 tons/8h Very sharp shaft The machine can operate as part of a production line or the raised stand on which the machine is placed can be removed to work at the standard belt height of 900 mm from the ground. Fully dismountable for cleaning. Fully operational after service. The machine is equipped with a shaft with rubber wheels and a pneumatically inflatable shaft for products with a particularly challenging structure. No tools are required for disassembly and cleaning. More information and videos can be provided to interested parties via email. The device is in perfect condition, without any defects, following a major service. Complies with all European Union standards and safety requirements – CE certificate.

Condition: excellent (used), functionality: fully functional, mileage: 16,300 km, gearing type: hydrostat, fuel type: diesel, overall weight: 30,800 kg, empty load weight: 30,800 kg, lifting height: 6,900 mm, drive condition: 90 %, chain condition: 90 %, number of seats: 1, shovel volume: 3 m³, suspension: steel, Year of construction: 2018, operating hours: 15,999 h, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, head guard, hydraulics, low noise, onboard computer, rear pickup, steel tracks, tilting carriage, An authorized SUBARU dealer in Łaziska Górne has a Japanese-made CAT 330D2L crawler excavator for sale, complete with a set of three buckets and a soil loosening hook. Inspected by our mechanics, the hydraulics are fully functional and have minimal play. It has been nicely refurbished and prepared for further heavy-duty work. It features 60cm wide steel tracks, a GPS MC3000 for precise digging, and is additionally equipped with 360-degree cameras. WE OFFER AFFORDABLE TRANSPORT THROUGHOUT THE EUROPEAN UNION AS A PROMOTION WITH OUR FLEET! The price includes a complete set of documents for registration. We offer every form of payment: Leasing, credit, cash, and bank transfer. With cash payment or bank transfer, you can drive the vehicle away from the dealership immediately. Additionally, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid cars and trucks to the specified address throughout Europe. More information about our services is available from our sales representatives. Engine: Model: Caterpillar C7 Type: diesel, 6-cylinder, turbocharged, intercooled Displacement: 7.2 l Power: 204 kW (approx. 277 hp) Fuel injection: HEUI (hydraulic-electronic) Operating parameters: High torque at low speeds Very good cooperation with the hydraulics Stable operation under heavy load Advantages: Simple and durable design Low operating costs No complex exhaust emission electronics Proven unit for heavy earthmoving work Fedpszadcbjfx Ap Depn Hydraulic system: Maximum working pressure: 35 MPa Pressure in lifting mode: 38 MPa Pump flow rate: approx. 480 l/min Rotation pressure: approx. 29.8 MPa Working forces: Bucket digging force: approx. 179 kN Arm digging force: approx. 126 kN Swing mechanism: Swing speed: approx. 11.5 rpm Torque: approx. 110 kNm Operating parameters: Maximum digging depth: approx. 7.2 m Maximum reach: approx. 10.7 m Loading height: approx. 6.9 m Maximum digging height: approx. 10 m Working equipment: Bucket capacity: approx. 1.5–1.8 m³ Boom length: approx. 6.15 m Arm length: approx. 3.2 m General parameters: Operating weight: 30800 kg Undercarriage: LC (Long Carriage) Track width: approx. 600 mm Application and main features: High digging force and efficient hydraulic system Simple and durable engine design with no complex exhaust emissions Very good parameters for heavy earthmoving and loading work Transport dimensions: Transport length: 10.4 m Transport width: 3.19 m Transport height: 3.35 m Undercarriage width (LC): 3.19 m Track length on the ground: 4.0 m The stated price is net and applies to exports and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price!

Condition: used, Year of construction: 2000, IMMEDIATE CLEARANCE SALES AUTOMATIC BED LINEN HEMMING, FOLDING & PACKING PLANT / COMPLETE set Sheeting hemming automate : AKAB AK 244 2437..748 short side / 132 2438 long side Yoc 1991 Max width 240 cm , With Singer sewing mc Speed 170 kpl/h, Sewing Lock 6kpl, Chain stitches and industrial stitches Sweing in Longitude and cross-sectional Duvet cover stitching automate : AKAB Yoc 1984, updated in 2005 with modern Omron logics with Union Special sewing mc , AK 156 2009 short side, 188 2010 long side Max width 180 cm Fjdpfxsy Hvaas Ap Dspn Pillow case hemming automate : AKAB Yoc 1983, updated in 2005 with modern Omron logics With folding & conveyor Adler sewing mc Max fabric width 240 cm, with foulding rods for fabric of 150 cm, Akab AK: 198 1870 sewing, 176 1871 fould, 187 1874 conveyor Turning mc for pillowcase : Supaturn SUP 3314 , Yoc 1999 Folding mc Duvet Covers : Jentex Type 5*5, Machnr 42-103, 2000, Max article size 315 x 375 , min 80 x 80 cm Table for fold mc Jomeks, yoc 2001 Folding for pillow cases : JULIEN yoc 1988 For pillow cases max 110 x 120 cm Julien CT/708, 1988 CT/707 Packing station for pillow cases Packing station for pillow cases, with conveyor belt - rollers - see pictures Packing station for duvet covers, with conveyor belt - rollers - see pictures MACHINEs WERE REFURBISHED - UPDATED , AFTER FEW YEARS PROFESSIONALLY PRESERVED MARKED, DISMANTLED, STORED ON MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately. Manual sewing machines : Juki lockstitch DLN-415-4 Yamato overlock AZ 8003-04 DF Yamato overlock YA AZ8003G-04DF/K2/SC10, yoc 2001 Global ylisyrjäys OV-704-050 lift wagon PV-12-3350

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 2000-Litre Pressure Tank – English Translation The CORMAK pressure tank with a capacity of 2,000 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing the compressor's operating parameters. Key Advantages of the 2,000 L Pressure Tank Professional pressure-vessel construction – made of high-grade 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 2,000 litres – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multi-connection system – equipped with 5 connections in 2" and 1/2" sizes, allowing flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – the vertical construction helps save valuable space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE marking and the identification number of the UDT notified body, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure-vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 2,000-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of compressed-air-powered equipment and significantly extends the compressor's service life by reducing the number of start-up and shutdown cycles. The vertical design allows for compact installation, which is particularly important in facilities where space is limited. Fpodpfx Apjzznuve Don Standard Equipment Connection ports: 5 pcs. – sizes 2" and 1/2" Nameplate with CE marking UDT notified body identification number Complete technical documentation and pressure-vessel passport External anti-corrosion coating Technical Specifications Parameter Specification Weight (kg) 360 Number of connections 5 Connection size 2", 1/2" Dimensions 289 × 101 cm Tank capacity (L) 2,000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 1,010 Height (mm) 2,890

Condition: used, Year of construction: 2011, Double auger spreader Drive via vehicle hydraulics Capacity: 1.8 m³ Brine: 840 l Adjustable spreading width CONTROL PANEL FUNCTION NOT TESTED Sale in current condition and only to other businesses! Our business hours: Fedsx Svryspfx Ap Djpn Mon-Thu: 07:00 am - 03:30 pm Fri: 07:00 am - 03:00 pm Offer subject to our general terms and conditions! Sale only to commercial customers! Used vehicles / used equipment sold without warranty of defects as per our terms and conditions! If you have further questions, I am happy to assist you. For viewings and/or test drives, please schedule an appointment in advance! Vehicles/equipment are not always on site.

Condition: used, For sale: LK measuring table, granite Length: 3500 mm Fpedpfx Apogbd Rts Don Width: 2100 mm Thickness: 500 mm Weight: approx. 10,000 kg Includes: air bearings Price for the LK measuring table: €4,500 Delivery conditions: Delivery time: in stock, subject to availability Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for any discrepancies between the technical specifications in this offer and the actual machine, accessories, and parts. Machines, accessories, and parts are sold in their current condition, as known to the buyer. We cannot offer any warranty on used machines, accessories, and parts. The METAL UNION CONDITIONS, deposited with the Registry of the District Court of Rotterdam, as they read according to the latest version deposited there, apply to all our quotations, all orders placed with us, and all agreements concluded with us. The delivery conditions will be sent to you upon request. Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry, and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 b 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), TGL: 28561/01 Fodpfx Apemikdho Depn Table number: 14167 diameter: 315 mm footprint: 380 x 600 mm Height: 150 mm Accessories/equipment: graduation on table 360°, rotatable Condition: good weight: 75 kg dimensions: 600 x 600 x 320 mm dimensions with frame: 700 x 700 x 1.500 mm

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F421.24213, Year of construction: 2025, operating hours: 430 h, 3DGence INDUSTRY F421 – Excellent Condition Showroom Unit - Only 430 Operating Hours Price: EUR 38,900 net + shipping within the EU We are offering a 3DGence INDUSTRY F421 professional high-temperature industrial 3D printer in excellent condition, with only 430 operating hours. The printer was purchased directly from 3DGence in February 2025, when we were an official 3DGence partner. It has been used very little and is in excellent technical and cosmetic condition. Key advantages: 3DGence INDUSTRY F421 Only 430 operating hours Purchased directly from 3DGence – February 2025 Still covered by the manufacturer's warranty Full technical support from 3DGence M280 Printing Module included M360 Printing Module included Professional industrial-grade machine for demanding engineering applications Excellent condition Original purchase documentation available Manufacturer support and warranty status can be verified with 3DGence Included: 3DGence INDUSTRY F421 printer M280 Printing Module M360 Printing Module Original equipment and accessories supplied with the machine Documentation Why this machine? The INDUSTRY F421 is designed for professional and industrial applications requiring high-temperature materials and reliable, repeatable production. The included M280 and M360 modules provide flexibility for a broad range of engineering-grade materials and applications. Fedpozulwujfx Ap Dopn With only 430 operating hours, this machine offers an opportunity to acquire a nearly new F421 at a significantly lower cost than a new system, while retaining the manufacturer's warranty and technical support. The machine is fully operational and can be inspected and tested before purchase. Operating hours: 430 hours Year of purchase: 02/2025 Location: Slovakia / European Union For further technical information, additional photos, documentation, or to arrange an inspection, please contact us.

Condition: used, Year of construction: 2018, We are offering for sale a well-maintained and fully functional Bucher spreader, model Yeti 1800 W FS, manufactured in 2018. Further details and specifications are available upon request. Location: 07806 Neustadt/Orla. Fpsdpfezkdu Rjx Ap Don