Contour & Roughness measuring device

Mitutoyo Formtracer CS3000 H4

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Nedpfotqf Rzex Ahnjlf Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) Nljdpfjpyg N Ajx Ahnef The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Njdpfod Nw Ttox Ahnjlf Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts Nledpfx Asncfd Rohnof - Glass standard 25mm - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: used, Year of construction: 2017, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 450 mm table size X: 750 mm table size Y: 600 mm max. workpiece size X: 1040 mm Nodpoym Rr Njfx Ahnjlf max. workpiece size Y: 730 mm max. workpiece size Z: 410 mm max. electrode weight: 50 kg max. workpiece weight: 1600 kg generator: 64 Ampere cooler drop tank control Charmilles Charmilles control system High precision mold and tool machining Integrated EDM generator Dielectric system with cooling Suitable for tool and mold making

Condition: ready for operation (used), Year of construction: 2015, A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible. Nlsdpfx Aeynlu Uehnef

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW Nlodjwzmpzopfx Ahnjf total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: like new (used), Year of construction: 2012, Parts shown by hand not come. With machine come tool holders SK 40. Nlsdpfx Aslpcdwshnof X 600 mm; Y 430 mm, Z 460 mm; A 150 deg x 0.001;C 360 deg x 0.001 12.000 rpm, Heidenhain iTNC 530 , 40 tool places in changer SK 40.

Condition: new, Year of construction: 2026, 540×250 Surface Grinder (MYS1022) is a compact machine designed for precision grinding of small and medium-sized metal components. Its robust construction and advanced technologies ensure high machining accuracy and reliable operation in demanding industrial environments. Main advantages of the 540×250 (MYS1022) surface grinder The 540×250 (MYS1022) magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as hydraulic feed in two axes and precision guideways with a solid construction, ensuring reliability and high machining efficiency. Its compact dimensions and high accuracy make it an excellent choice for smaller workshops and production facilities where space is limited. Key benefits include: High grinding precision – maximum grinding area of 540 × 240 mm and transverse feed accuracy of 0.02 mm ensure excellent surface finishing quality. Compact construction – dimensions of 1800 × 1400 × 1800 mm and a weight of 900 kg allow easy installation in smaller production facilities. Smooth hydraulic feed system – two-axis feed system enables precise movements with transverse speed up to 600 mm/min, ensuring efficient machining. Stability and durability – robust construction with double guideways minimizes vibrations, guaranteeing stable operation during intensive use. Easy maintenance – centralized guideway lubrication reduces manual maintenance requirements and increases machine availability. Ready for operation – the machine is fully equipped for immediate production, minimizing setup and downtime. Machine design and technology Robust construction and precision components The MYS1022 surface grinder features a heavy-duty construction weighing approximately 1000 kg, providing excellent stability during machining operations. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishes. The spindle, driven by a 1.5 kW motor, operates with a grinding wheel measuring 200 × 20 × 32 mm, enabling efficient processing of various metal materials. Technical specifications Parameter Value Table dimensions 500 × 250 mm Longitudinal / transverse travel 560 × 260 mm Nlsdekkcm Uspfx Ahnef Maximum grinding area 540 × 240 mm Maximum distance from table to spindle centerline 490 mm Table guideways Double guideway Transverse movement per vernier scale division 0.02 mm Transverse movement per handwheel revolution 2.5 mm Vertical movement per vernier scale division 0.01 mm Manual vertical movement per handwheel revolution 1.25 mm Grinding wheel dimensions 200 × 20 × 32 mm Grinding wheel speed 2850 rpm Main motor power 1.5 kW Hydraulic oil tank capacity 80 L Hydraulic pump motor power 1.5 kW Coolant pump motor power 40 W Machine dimensions 1800 × 1400 × 1800 mm Weight 1000 kg Standard equipment Magnetic table Grinding wheel Grinding wheel holder Cooling system Chip separator with magnetic filter Halogen lighting system Technical documentation (DTR) CE declaration

Condition: ready for operation (used), Year of construction: 2012, A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible. Njdpsx Ih A Nsfx Ahnelf