Used Veb Spherical Roller Bearing for sale (11,369)

Condition: like new (used), functionality: fully functional, The machine has undergone a complete overhaul. It features new shafts, bronze bushings, bearings, rollers, rear sprockets, a completely new pneumatic system, a new electrical cabinet, and a feed rate control has been installed. Hedpszv Euvefx Aftefl

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Hsdpfxsynzg Hj Aftjfl Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Hodpfx Afszimqrotjfl Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: Hfedpfxjwqb Scs Aftel - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: used, Year of construction: 2022, machine/vehicle number: 105823706, input voltage: 400 V, year of last overhaul: 2022, Bread round-moulding and long-moulding machine, manual operation, for all wheat and rye doughs with a rye content of up to 90% and a water absorption of 172%, Eberhardt spherical round-moulding principle with superimposed moulding motion, moulding stroke adjustable in 3 steps, round-moulding or precise transfer to long-moulding, long-moulding system with steplessly adjustable roller pair with Teflon running surface, dough feed on the right, Liftomat dough handling device for transferring dough from the dough divider to the round-moulding machine, S/N 4293706. Hfsdpfx Aezgtxkjftol

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Table size: 1800 mm Minimum diameter: 200 mm Maximum number of teeth: 45 Max. module: 20 Hodpfx Afoylprfjtjfl Weight: 40 tons

Condition: used, RA1188 Hodpfx Aew Dwbgsftofl Schulz roller curve 90° roller curve conveyor 450-390 IR1220 Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveying speed: v = 0.35 m/s incl. lateral guides on both sides Roll: Type: G6/50 plain bearing with conical plastic moulding Transport mask: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports 70,00€ per piece Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor Hodpfx Ajt Hg Huoftefl With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: new, Year of construction: 2026, functionality: fully functional, 2 m Roller Conveyor The 2-meter roller conveyor is a highly durable material handling system designed for industrial feeding and receiving of heavy components such as shafts, steel profiles, pipes, and other machined elements. With a load capacity of 2000 kg and a robust steel construction equipped with seven wide rollers, it ensures reliable and smooth material guidance even in the most demanding production environments. Main advantages of the machine Load capacity up to 2 tons – ideal for handling heavy metal components. Steel bearing-mounted rollers – provide smooth operation under high loads. Precise height adjustment – adjustable from 545 to 855 mm, allowing compatibility with various machines. Modular design – possibility of extending and connecting multiple conveyors into longer roller tracks. Wide working surface – rollers with a working length of 470 mm allow handling of wide components. Construction and technology The conveyor is equipped with 7 steel rollers with a diameter of 90 mm, mounted on precision rolling bearings. Every structural component – from the frame to the support legs – is made of reinforced steel, ensuring safe operation under heavy loads and maintaining overall construction stability. The height adjustment system is based on locking screws and perforated guides, providing quick and rigid positioning. Precision and work efficiency The use of bearing-mounted rollers and a rigid welded construction ensures low rolling resistance, minimizing the risk of jamming and uneven movement. Thanks to the wide rollers and high load capacity, this roller conveyor is ideal for cutting, drilling, or milling heavy components. Applications The 2-meter roller conveyor is suitable for use in: Hfsdpfx Aovu S Eceftol Metalworking plants Production and technological lines Band saw workstations Portal milling machines Any applications requiring stable support of workpieces during machining processes Standard equipment 7 bearing-mounted steel rollers Robust steel supporting structure Height adjustment system 545–855 mm Feet with mounting holes Technical specifications – 2 m Roller Conveyor Parameter Value Roller diameter 90 mm Working roller length 470 mm Total roller length 500 mm Number of rollers 7 Conveyor length 2000 mm Conveyor width 600 mm Height adjustment range 545–855 mm Maximum load capacity 2000 kg

Condition: refurbished (used), Year of construction: 1988, Ingramatic RP1V: M6x75/40 mm. 230-600 ppm. Hfsdpfx Afeh Riuuotel Also available with a tabletting machine. Completely overhauled to like-new condition. Machine can be viewed in Calolziocorte (LC). OVERHAUL ACCORDING TO CE STANDARDS. The overhaul includes: - DISASSEMBLY AND CLEANING OF EVERY COMPONENT - REPLACEMENT OF ALL BEARINGS - GRINDING OF GUIDES OR REPLACEMENT IF NOT SUITABLE - OVERHAUL OF FEEDING UNIT - OVERHAUL OF SLIDE UNIT WITH REPLACEMENT OF BRONZE BUSHINGS - NEW LUBRICATION SYSTEM WITH COMPLETE HYDRAULIC UNIT, INCLUDING PUMP, OIL LEVEL INDICATOR, PRESSURE SWITCH, AND DISTRIBUTORS - NEW WATER PUMP FOR FEEDING TRAY - NEW VIBRATORY FEEDER, Ø670, COMPLETE WITH VIBRATION CONTROL PANEL AND PHOTOELECTRIC SENSOR FOR OVERFILL PROTECTION - OVERHAUL OF ROLLER DISCHARGE UNIT - PROTECTIVE GUARD COMPLETE WITH LAMP AND MICROPHONE - INSTALLATION OF SOLENOID VALVE WITH NEW AIR SYSTEM FOR VIBRATORY FEEDER AND GUIDES - NEW ELECTRICAL SYSTEM ACCORDING TO CE STANDARDS, COMPLETE WITH INVERTER - NEW MOTOR - REPLACEMENT OF BELTS - RAL PAINTING IN THE COLOR YOU SPECIFY

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Hjdpfxeyuyb No Aftefl Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 500 mm, total height: 750 mm, load capacity: 80 kg, roll diameter: 50 mm, roll width: 410 mm, Easysystem Checkweigher roller conveyor with weighing unit Easysystem scale roller conveyor for sale in new condition Hfodpfx Afovbdlzstel year of manufacture: 2022 weight measurement 0-25kg /0-80/kg load cell: 4x Dini Argeo FCX C3 20KG TR display: Dini Argeo DGT1S multifunctional, digital weight transmitter/display interface: Dini Argeo Profinet 1s RS485-ProfiNET interface, for DIN-rail mounting. With UL marked PCB, terminal blocks roller conveyor length: 990mm roller width 400mm track total width: 520mm height: 730mm bearing-mounted galvanized steel rollers with belt drive

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: Hfsdpfxjyx U N Ds Aftjl - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Please contact us for further information. Price on request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 2,00,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed Hfodpfsyzim Aox Aftel

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Hfodpfxsuf Rw To Aftel Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: good (used), roller glue application machine, laminating machine, laminating system, laminating system -Manufacturer: VEB Jonsdorf -Type: LAM 1300 Hfjdjranl Topfx Aftsl -Working width: 1300 mm -Number of rolls: 4 pieces -Roll diameter: Ø235 x 1310 mm / Ø170 x 1310 mm -Connection value: 2.2 kW -Dimensions: 2470/1000/H1390 mm -Weight: 1300 kg

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,055 kg, empty load weight: 1,945 kg, loading space volume: 10.4 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 750 mm, Price on request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible!* 1 unit available directly at the warehouse, RAL 7043 1 unit available in the short term, other RAL colors available upon request Other designs and sizes available ex warehouse Paderborn. You can view our stock levels on our website. Roll-off container according to DIN Technical description: •Internal dimensions: 6000 x 2300 x 750 mm •Usable volume: 10.4 cbm •Empty weight: 1945 kg •Base 5 mm S235 •Side walls 3 mm S235 •End wall angled upwards •All sheets and profiles continuously welded •Double-wing door with safety lock •Standard ladder according to UVV, screwed on, galvanized •Container tested and approved according to DGUV rule 114-010 •Base-side wall connection 90° •Stringers made of U 90x55x4 mm •Stringer spacing 750 mm •Hook diameter 50 mm, S355 •Hook height 1570 mm Hfsdpfxsz Artfe Aftel •Top frame round tube Ø 89 mm •Net hooks •All moving parts lubricable •Steel roller bearings 159×6.3, length 300 mm •Warning markings according to DIN 67520 •Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) •Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: like new (used), Year of construction: 2023, RHTC hydraulic workshop press HF-2 in good condition. Specifications: Pressing force: 30 tons Maximum pressure: 374.6 bar Cylinder stroke: 160 mm System capacity: 1.65 liters Hedezivkzjpfx Aftofl Fixed cylinder Working width: 565 mm Weight: 165 kg Professional quality, suitable for pressing bearings, bushings, axles, and other workshop tasks. Laser roller stand also for sale. Price: €1,250 excluding VAT.

Condition: new, load capacity: 3,000 kg, Various support blocks, rollers adjustable in 5 positions, suitable for heavy material. For transverse and longitudinal rotation. Bearing-mounted rollers insertable for longitudinal and transverse transport. Designed to relieve, for example, welding positioners or for transporting or rotating round parts. Available in various versions. Stepless height adjustment available on request. The beams themselves have a load capacity up to 6 tons. Price per piece. Prices from 450 €; with stepless height adjustment 850 €. Hodpey Rf S Hefx Aftofl

Condition: used, RA1188 Schulz roller curve 90° roller curve conveyor 450-390 IR1220 Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveying speed: v = 0.35 m/s incl. lateral guides on both sides Roll: Type: G6/50 plain bearing with conical plastic moulding Transport mask: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Hfedpfxsu Rv U Re Aftol Scope of delivery: without supports (if required, please inquire) Optional: Supports 70,00€ per piece Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2026, condition: excellent (used), Field roller, grassland roller, meadow roller, soil roller, roller -Meadow roller: Diameter: 1200 mm -Pipe wall thickness: 18 mm Features: Water-fillable, with scraper, warning signs -Total width: 3000 mm Hodpfxstlzdbj Aftefl -Working width: 2650 mm -Bearings: Polyamide bushings -Weight when filled: approx. 5,000 kg -Unladen weight: 2,200 kg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 810 mm, Equipment: documentation/manual, A like-new machine with accessories and complete documentation. Please examine the images carefully, paying attention to the operating hours! The machine will be available in approximately 4 weeks. Control: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Control station can be swiveled 250° Tool drive for automatic turret - with 8 tool stations Hfjdpfxoy Tzhpe Aftjl - Tool drive via gears and clutch - Drive speed adjustable, max. 4000 RPM - Milling with end mill Ø 12mm x 8mm x 45mm / min, C-axis via main drive - Main spindle speed 0.001°/min - 100 RPM Horizontal bed - Prism/flat guide hardened and ground Working area - Swing diameter over bed 400 mm - Swing diameter over compound slide 230 mm - Compound slide travel 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Spindle head - Spindle head DIN 55026 A6 - Spindle diameter in front bearing 115 mm - Spindle bore 82 mm - Speed range RPM 1-3500 Cross slide - Feed rate range, plane mm/rev / Feed rate range, longitudinal mm/rev / Thread pitches mm 0.01-999.9 - Rapid traverse, plane/longitudinal m/min 5/10 - Automatic central lubrication - Digital AC servomotors, plane and longitudinal Tailstock - Quill diameter mm 60 - Quill travel mm 140 - Taper attachment MK 4 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Control - HEIDENHAIN MANUALplus 640 HSCI - V-constant for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input in dialog with graphical images - Contour cycles: machining and finishing, longitudinal and planar, with tapers, radii and chamfers - Drilling cycles with / without pecking - Drilling/hole pattern cycle for axial and radial centering and drilling - Free-forming cycles DIN 76 and DIN 509 Form E+F - Special free-forming - Facing - Threads cylindrical, conical, flat threads with constant or variable pitch and with suggestion for thread depth - Thread drilling cycle with chip breaking function - Thread repair - Variation possibilities within cycles - ICP interactive contour programming - Programming according to DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed rate input mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphical program simulation (line or cutting path) Simulation in single block or complete program - Oriented spindle stop with angle indication - Automatic program run optionally single block or sequence cycles (with door locking) - Tool memory for 250 tools - Comfortable tool file - Technology database with 9 material/cutting tool combinations - Assignment of cutting speed / speed and feed rate - Part program memory 1.8 Gbyte Standard accessories - Chip tray - Machine light LED and energy-saving function - Leveling elements - Main motor fan circuit, temperature-controlled - Single-chamber filter for coolant cleaning, integrated into the coolant line (40 my) - Complete documentation

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Hsdpfxsztq Hxs Aftefl Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 7.5 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,055 kg, empty load weight: 1,945 kg, loading space volume: 10.4 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 6,000 mm, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for multiple container purchases. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible!* 3 units available in stock, RAL 7043 Technical description: Other models and sizes available from the Paderborn warehouse. You can view our stock on our website. Roll-off container according to DIN *Internal dimensions: 6000 x 2300 x 750 mm *Usable volume: 10.4 cbm *Unladen weight: 1945 kg *Base 5 mm S235 *Side walls 3 mm S235 *End wall angled upwards *All sheets and profiles continuously welded *Double-wing door with safety lock Hfodpfxjz Arqwj Aftel *Standard ladder according to UVV, screwed on, galvanized *8 lashing eyes in the base plate, load-bearing up to 2.5 tons *Container tested and approved according to DGUV rule 114-010 *Base-side wall connection 90° *Stringers made of U 90x55x4 mm *Stringer spacing 750 mm *Hook diameter 50 mm, S355 *Hook height 1570 mm *Top frame round tube Ø 89 mm *Mesh hook *All moving parts lubricatable *Steel guide rollers 159×6.3, length 300 mm *Warning markings according to DIN 67520 *Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) *Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: excellent (used), roll diameter: 50 mm, roll width: 310 mm, Knapp roller conveyor curve, 90° reversing roller row/ct2167 Manufacturer: KNAPP Track width: 315mm / total width: 385 mm Inner curve length: 1390 mm Outer curve length: 1930 mm Roller material: Steel Roller diameter 50 mm Bearing steel rollers Powder-coated, perforated steel frame Guide rail, belt drive SEW Eurodrive drive. Hfjdswyut Eopfx Aftol Power: 0.25kW, speed: 39m/min