Used Villex Container Gmbh Mini Cube Nero 1.0 for sale (72,575)

Condition: good (used), Year of construction: 1991, WOHLENBERG GOLF 370 Gathering and Perfect Binding Line Manufacturer Wohlenberg Buchbindesysteme GmbH, Verden Aller, Germany Production Year 1991 • Max. Size: 430x330 mm (16,9"x13,0") • Max. Speed: 6000 imp./hour • • ZTM 370 stacker • 12 automatic stations + 2 manual • Golf 370 gluer (1991/94 year of manuf.) • 15 clamps • hotmelt • Trim TEC 45I three knife trimmer (year of manuf. 2000) • 450 x 350 mm max • 120 x 100 mm min • 10,000 / hour • Dodpfszbuh Dex Abzsch Availability immediately Sale Reason closing company Condition of the Machine functional, condition and wear and tear according to its age, well maintained not in daily production but can be seen running at your request

Condition: good (used), 7x pallet transport racks, Lützenkirchen – used - : Price per unit: €395 (net), dismantled, packaged, and loaded! Manufacturer: Lützenkirchen Lagertechnik GmbH Type: / Year of manufacture: not specified Dodpfx Ajw Acrusbzjch Load capacity: not specified Quantity: 7 Dimensions: L76cm x W60cm (54cm effective) x H30cm Condition: good Available: immediately Location: 04720 Döbeln

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Price per unit: €350 (net) Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Load capacity: 60 kg Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Dsdpox El A Uefx Abzech Location: Warehouse Frankenberg / Saxony

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Dsdpfx Asy Urtfebzoch Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg KS crosscut saw for cutting (glass) strips with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Dcjdpfxsy T R Sqe Abzeh Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Complete Package Includes: - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Condition: Brand New / Unused Dcodpfx Asy A Nu Asbzjh Availability: Immediate (Ex-stock) Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: excellent (used), Professional electric motor from the renowned German manufacturer AC-Motoren GmbH. Robust construction designed for continuous operation in machinery, pumps, fans, gear units and other industrial equipment. The motor is in good visual and technical condition. Flange-mounting type B5. Shaft with keyway. Technical data: • Manufacturer: AC-Motoren GmbH • Type: FCA 112M-4 • Power: 4.8 kW • Power supply: 3~ / three-phase • Speed: 1440 rpm – 50 Hz • Speed: 1728 rpm – 60 Hz • Voltage 50 Hz: 380-420V / 660-720V • Voltage 60 Hz: 380-480V / 660-830V • Current: 8.36 A / 4.82 A • Cos φ: 0.82 • Operating mode: S1 • Degree of protection: IP55 • Standard: IEC 34-5 • Mounting: flange B5 • Shaft diameter: 28 mm • Shaft length: approx. 62 mm • Shaft with keyway • Aluminium housing Applications: • Pumps Dsdpfsy Rr Insx Abzsch • Fans and blowers • Production machinery • Gearboxes and drives • Workshop equipment Condition: Used item, with normal signs of use and storage. The motor is in very good condition. Included: • Motor as shown in the photos

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. The set includes: - CAB label printer - Feed hopper - Acceleration conveyor - Weighing machine Dodpfx Asy Hiyasbzech - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Product weight: up to 1 kg (possible calibration) Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, total length: 900 mm, total width: 800 mm, total height: 1,900 mm, laser hours: 2 h, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, laser source manufacturer: Raycus, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled Djdeqfcvijpfx Abzoch - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) Dedpfjy T Ixnox Abzoch - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DATA Accuracy: from 3.0 + L/250 µm Measuring range X-axis: 3,500 mm Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Type of input current: Three-phase Equipment: Lighting, documentation/manual, nameplate available Details of the offer Description Portal measuring machine Manufacturer: Mora Dcjdpfeyr Simex Abzoh Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, Type MS10 Control panel on wheels Measuring and evaluation unit 2 PCs, Manufacturer HP, Type XW4300/Z220 2 monitors, 19/24", Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, W 1,000 mm, 7 drawers. Contents: Infrared measuring probe, Manufacturer Renishaw, Type PH10M, Calibration mandrel, accessories

Year of construction: 2020, condition: used, functionality: fully functional, construction height: 2,200 mm, number of spindles: 3, space requirement length: 5,000 mm, space requirement width: 5,500 mm, machine/vehicle number: 50844458, degree of automation: automatic, production capacity: 3,000 unit/h, We are offering this used PIA Automation production line for surgical disposable masks, manufactured in 2020. The system was operated for only 2.5 years in single-shift operation and can be described as being in "very good" condition. In addition to the production unit, the line includes a connected compressed air generation system as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks. Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Dcedpfxjy Ddnme Abzsh Connection protection: 25 A Short-circuit capacity: < 10 kA System Concept: The line consists of a total of three sections, which are connected by conveyor belts. In the first segment, the individual consumables are fed in via rollers, folded, the nose wire integrated, welded, and then cut to the correct length. The finished, cut masks are then conveyed by an indexing belt and transport conveyors to the subsequent stations, which are arranged in parallel. At these stations, the ear loops are fed in and welded to the face mask. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-100 reconditioned | refurbished with new bearings (flange bearings) and new vibration elements (rubber buffers) Manufacturer: S&F GmbH Type: ASM-100 Year of manufacture: 2022 Djdpfozbvy Uex Abzech Screening capacity: approx. 10 - 12 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 1.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Drive power: 1,1 kW, 3 x 400 V, 50 Hz L x W x H: 2,500 x 1,600 x 1,250 mm Design: ECO Line Machine weight: approx. 650 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-200 reconditioned | refurbished with new screen box, new bearings (flange bearings) and new vibration elements (rubber buffers) Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2004 Screening capacity: approx. 25 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 2.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Drive power: 1,5 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets Dedpfx Aezbvy Iobzjch - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb - Counter comb in new condition - Two hoppers Dedpfsw S Iiisx Abzoch - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final - Only 980 operating hours

Condition: excellent (used), functionality: fully functional, Low-speed machine Cutting width – 150 mm Motor power – 2.2 kW Dcodpfx Ajyf I N Ajbzsh Rotor speed – 200 rpm Number of rotor blades – 9 pieces Number of stator blades – 2 pieces 6 units available, in perfect condition Capacity up to 25 kg/h Price: 1200 EUR per unit

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Dcsdsi Huzxjpfx Abzoh Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 Dcjdeyhxl Ropfx Abzsh 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Dedpfx Aspxnpasbzech Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Dsdpfsy Swq Rox Abzjch Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey-black, empty load weight: 1,000 kg, machine/vehicle number: 11m² Container Stand Classic-Linie, Equipment: lighting, External dimensions: 240 x 460 x 260 H Standard configuration description: • Roof/wall insulation PU – 40 mm • Sandwich panels – (RAL 7016) • Frame color – (RAL 7016) • Floor – laminate • 1x exterior door 90 x 200 • 4x windows (sliding & fixed) Dsdpfxsr Db R Ro Abzjch • LED lighting (interior/exterior) • Electrical cabinet with circuit breaker • Power connection 32 A incl. sockets • Weight – 950 kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Dsdpfx Ajywg Sbobzoch Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) Dcsdpfx Abexuvk Eszeh - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. Dsdjyu Nabepfx Abzech - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, Rated voltage: 100V AC±10% Power consumption: 340VA Rotary microtome Dcodpfoytrpvsx Abzjh The LEICA RM2155 is a robust, fully motorized rotary microtome designed for the precise production of thin sections from paraffin- or resin-embedded samples for histological, pathological, and materials analysis applications. The instrument combines motorized automation with manual fine control, ensuring reproducible sectioning quality even at high throughput rates. Technical features: - Motorized sectioning with adjustable speed and motorized coarse advance, optimizing workflow for routine and demanding specimens. - Adjustable section thickness range from 0.5 µm to 60 µm with fine increments to accommodate varying material requirements. - Specimen advance: 27 mm via stepper motor - Vertical stroke: 70 mm - Maximum sectioning range without retraction: 65 mm (without specimen orientation) - Maximum sectioning range with retraction: 60 mm - Specimen retraction in motorized cutting mode: 10, 30, 70 µm (adjustable depending on speed, can be deactivated) - Specimen retraction in manual cutting mode: 5, 10, 15, 20 µm (can be deactivated) - Movability of knife holder base: N/S travel ±25 mm, E/W travel ±20 mm - Maximum specimen size (WxHxD): 50 x 60 x 40 mm - Specimen orientation: horizontal 8°, vertical 8°, rotation ±90°, trimming steps 5, 15, 30 µm - Electric coarse drive: 900 µm/s Cutting motor: - Cutting speed: 0; 0.5 – 420 mm/s - Return stroke speed: approx. 120 – 420 mm/s Application areas: Production of consistent tissue sections for microscopic analysis in histology, pathology, neuropathology, as well as in materials science investigations; suitable for both research and routine laboratory environments with high demands on sectioning precision and reproducibility. The LEICA RM2155 stands out for its technical reliability, precise sectioning performance, and versatile application possibilities, making it a long-term investment for demanding laboratory processes. Including: power cable, knife holder base, knife holder NZ, standard chamber, foil chamber, carbide knife (16 cm), manual