Used Vogelsang Push-Back Stelling for sale (4,156)

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop Pgodpeu Icp Aofx Alwjt - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, functionality: fully functional, mileage: 2,85,241 km, power: 338 kW (459.55 HP), first registration: 09/2022, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Podpfxjz E E U Eo Alwegt Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor Tyres Information Front left - 6 mm Front right - 6 mm Rear left inner - 8 mm Rear left outer - 8 mm Rear right inner - 9 mm Rear right outer - 8 mm

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Pedezbg Ezopfx Alwjgt Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: new, Year of construction: 2024, ALZMETALL pillar drilling machine AX 3/S, drilling capacity in steel 40 mm, spindle speeds: 160-2250 rpm, short spindle MK3, spindle stroke: 120 mm, overhang: 293 mm, column diameter: 115 mm, machine table usable support surface: 514 x 360 mm, with T-slots 2 x 14 mm x 224 mm, distance spindle-table min./max. 117/701 mm, machine table height adjustment via hand crank, machine height without options: 1840 mm, net weight: 260 kg. Standard equipment: Main switch with locking mechanism Motor with thermal protection contact Mushroom push button (latching) for EMERGENCY STOP Speed adjustment, stepless Spindle guard with electrical protection Main switch Right and left rotation Protection class IP 54 Motor insulation class "F" (155°) Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Digital drilling depth display Zero point setting (drilling start) Pgsdpfxez E Sqyj Alwst 5-digit LED display, character height 13 mm, item no. 37.1 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected at our premises by appointment.

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Pgodpfxozvhkyj Alwot

Condition: used, functionality: fully functional, The SP50L is a high-quality, flexible solar panel with a power output of 51 watts. Thanks to its advanced Back Contact cell technology, the panel achieves an efficiency of over 23%, ensuring high energy generation even under less than ideal lighting conditions. Its ultra-lightweight and thin design makes the panel particularly suitable for applications on boats, campers, and other surfaces with slight curves. Weighing only approximately 0.8 kg and measuring 1109 × 292 × 2 mm, the SP50L combines durability, flexibility, and excellent performance in a compact solution for sustainable energy generation. Pgodpfxszbrywj Alwot

Condition: used, Year of construction: 2012, operating hours: 7,000 h, Equipment: all wheel drive, New Holland B115C (C-Series, approx. year of manufacture 2012) 110 hp Very good condition Approx. 7000,- Pjdpsxnvlvjfx Alwegt

Condition: good (used), Frame: 7800*1100*100 mm Crossbars: 3600*130 mm 3600*150 mm 3600*140 mm 2790*110 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Further accessories available, such as: Frame, corner, and impact protectors, push-through guards, chipboard, grating, back wall grating, and deep shelf supports. Shipping: Pgsdpfxst N Itbj Alwot Please inquire about the shipping costs, specifying your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving assembly/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices, as well as sales subject to prior sale!

Year of construction: 2023, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: N.A., Unused CIC 600 Inverting Filter Centrifuge made of Hastelloy C22 DIN 2.4602. The centrifuge was delivered and installed in 2023, however, this unit along with much of the associated equipment was never put into operation. The centrifuge has a drum diameter of 600 mm, a nominal capacity of 52 liters or 65 kg, maximum drum speed 1940 rpm, maximum centrifugal acceleration 1260 (g), housing material 1.4571, product-wetted parts made of 2.4602—identical to Heinkel centrifuges. Scope of supply: a) CIC 600 Inverting Filter Centrifuge b) Support frame c) CIP system integrated into the main system d) Quick-release front housing, tool kit included e) Inertization pressure monitoring integrated into the main system f) Solids discharge valve g) Flooding function h) Wash tray including coating Pgjdpfxeyffr Ue Alwet Detailed technical information is available upon request. Please contact us for a written offer. Dismantling, packaging, and loading onto a truck will be organized and supervised by Cycron GmbH, ensuring a highly professional process. For further questions or to get in touch, feel free to contact us anytime. We look forward to hearing from you. Cycron GmbH, Switzerland

Condition: used, maximum load weight: 30,100 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 9,500 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 53 m³, Year of construction: 2022, Stock number: 5846 Psdpozp A Ruofx Alwogt Kempf, approx. 53 m³ tipping semi-trailer with approx. 28 m³ Liquid-X-Liner system - Combi-Liner - 1st owner!! ----* Manufacturer: Kempf / Liquid-X-Liner System * Type: SKM 36/3 - Combi-Liner - Tipping trailer - Slurry tanker * First registration: 12/2022 * Color: Yellow * Dimensions, tipping trailer overall: approx. 53 m³ (9.50 m long x 2.43 m wide x 2.30 m high) * Volume, tipping trailer: approx. 43 m³ (7.70 m long x 2.43 m wide x 2.30 m high) * Volume, slurry: 28 m³ * Total weight: 36,000 kg * Unladen weight according to vehicle registration: 5,900 kg + Liquid-X-Liner installation * Payload: 30,100 kg * Axles: 3x SAF axles / 1st axle liftable / Drum brakes * Tires: 385/65 R 22.5 on aluminum rims, approx. 50% tread * Suspension: Air suspension with raising and lowering function * EBS * 28 m³ Liquid-X-Liner system * Rotary lobe pump Vogelsang FX116-360 * with a maximum conveying capacity of 4,500 liters/minute * 1x front toolbox on the left with 8" connection, manual slide valve, and pneumatic slide valve for * loading and unloading * 1x front toolbox on the right with 8" connection, manual slide valve, and pneumatic slide valve for * loading and unloading * 2x residual emptying valves next to the pump * Open venting system (tank with sight glass) * Combination door (1/3 to 2/3) * Grain slide valve in the middle * Full-load supports (drop-down supports) * 1x front toolbox on the left * 1x front toolbox on the right * Tarpaulin with central locking * Operating platform at the front with a ladder on the left * Folding tarpaulin frame * 2x tarpaulin rods * 2x lashing straps from front to back * Vibrator * Individual fenders * LED rear lights * LED reversing lights * Foldable underrun protection * 1st owner German vehicle!! German documents!! 1st owner!! Unladen weight 5,900 kg + weight of Liquid-X-Liner system! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have crept into the text or the details. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: new, Equipment: air conditioning, We are the official Sunward dealer responsible for the following regions: Berlin, the state of Brandenburg, and Eastern Saxony. Sunward SWE 90 UF 2PB Crawler Excavator New machine Air conditioning Pjdpfx Aloyq A Nuewjgt Operating weight: 9.6 t Yanmar engine with 46.2 kW Displacement: 2.615 l Offset boom 2 auxiliary hydraulic circuits Aux 1 and 2 on joystick Air-suspended comfort seat LED work lights Refueling pump Central lubrication system Load-holding valve MS08 hydraulic quick coupler Protective guard at the front and top of the cab (available at extra cost) Overall height: 2,720 mm Overall width: 2,260 mm Max. digging depth: 4,740 mm Max. dumping height: 6,135 mm 5-year manufacturer's warranty Buckets and attachments available on request. We are the official Sunward dealer for the following areas: District of Wittenberg, District of Nordsachsen, District of Leipzig, City of Leipzig, District of Elbe-Elster, District of Oberspreewald-Lausitz, City of Cottbus, District of Spree-Neiße, District of Oberhavel, District of Barnim, District of Märkisch-Oderland, City of Frankfurt Oder, District of Oder-Spree, District of Dahme-Spreewald, District of Teltow-Fläming, District of Potsdam-Mittelmark, City of Potsdam, City of Brandenburg, District of Havelland, City of Berlin. For quotations, please provide your complete address and email address! All information provided without guarantee.

Condition: new, We are the Official Sunward Dealer for Berlin, the state of Brandenburg, and eastern Saxony. Visit us and be impressed by our extensive selection and quality. We always have about 20 excavators in stock. Miniexcavator Sunward SWE17F New machine Operating weight: 1.78 t Engine: Yanmar 3-cylinder diesel engine 3TNV80-SSU Power: 13.4 kW/2200 rpm Telescopic undercarriage, width adjustable from 99 cm to 1.36 m Folding dozer blade Two travel speeds with auto shift Boom swing (allows working directly alongside walls and hedges) LED working lights Radio with SD/USB AUX 1 proportional via joystick 5-year warranty Options: MS01 quick coupler Pgedpeyq A Rrofx Alwet Accessories such as buckets, hydraulic breaker, grapple, etc. Powertilt Matching trailers also available. All information subject to change. Take advantage of this unique opportunity to acquire a genuine professional machine at an unbeatable price. Sunward ranks among the 20 largest excavator manufacturers worldwide. Inspection possible at any time by appointment. We also accept trade-ins of your used machines. For offers, please provide your full address and e-mail address! We are the official Sunward dealer responsible for the following regions: LK Wittenberg, LK Nordsachsen, LK Leipzig, SK Leipzig, LK Elbe-Elster, LK Oberspreewald-Lausitz, SK Cottbus, LK Spree-Neiße, LK Oberhavel, LK Barnim, LK Märkisch-Oderland, SK Frankfurt Oder, LK Oder-Spree, LK Dahme-Spreewald, LK Teltow-Fläming, LK Potsdam-Mittelmark, SK Potsdam, SK Brandenburg, LK Havelland, SK Berlin.

Condition: new, We are the official Sunward dealer for Berlin, the state of Brandenburg, and Eastern Saxony. Visit us and be impressed by our large selection and outstanding quality. We always have around 20 excavators in stock. SUNWARD SWE20F Brand new machine Operating weight: 1.94 tons Engine: Yanmar 3-cylinder diesel engine 3TNE88 (Japan) Power: 13.4 kW/2200 rpm Telescopic undercarriage: 99-132 cm wide Foldable dozer blade 2 travel speeds Swing boom (allows working directly along walls and hedges) Long dipper stick, digging depth: 238 cm Load holding valve Pump: Kayaba (Japan) 2x proportional joystick control LED work lights Radio with SD/USB 2x auxiliary circuits (for grab/hammer/shear) Pgedpfxoyq A Rxe Alwet 1x quick coupler hydraulic lines With genuine counterweight – unlike imitations, which only have sheet metal rear covers that can lead to machine tipping. 5-year warranty. Optional Equipment: MS01 mechanical quick coupler 30 cm bucket 50 cm bucket 1 m ditch cleaning bucket, rigid 1 m ditch cleaning bucket, hydraulic MS01 hydraulic quick coupler Powertilt and other attachments available on request. Matching trailers also in stock. All information provided without guarantee. Take advantage of this unique opportunity to acquire a genuine professional machine at an unbeatable price. Sunward is among the 20 largest excavator manufacturers worldwide. Viewings possible at any time, by prior telephone arrangement. Trade-in of your used machine possible. For quotations, please provide your full address and email address! We are the Sunward dealer responsible for the following regions: Districts: Wittenberg, Nordsachsen, Leipzig (district and urban), Elbe-Elster, Oberspreewald-Lausitz, Cottbus (urban), Spree-Neiße, Oberhavel, Barnim, Märkisch-Oderland, Frankfurt Oder (urban), Oder-Spree, Dahme-Spreewald, Teltow-Fläming, Potsdam-Mittelmark, Potsdam (urban), Brandenburg (urban), Havelland, Berlin (urban).

Condition: new, Year of construction: 2025, We are an official Sunward dealer for Berlin, the state of Brandenburg, and Eastern Saxony. Visit us and be impressed by our wide range and outstanding quality. We always have approximately 20 excavators in stock. Micro Excavator Sunward SWE08B New machine Operating weight: approx. 1 ton, with grading bucket 1.1 tons (measured on scale) Hydraulic pilot control - joystick operation Yanmar 2-cylinder diesel engine – 2TNV70-PSU Power: 7.2 kW / 2400 rpm Fuel level indicator Hour meter Telescopic undercarriage, width adjustable from 74 to 98 cm 2 travel speeds Swing boom (enables work directly alongside walls and hedges) LED work light Auxiliary hydraulics (for breaker and swivel bucket) 5-year warranty Options: MS01 mechanical quick coupler 30 cm digging bucket 50 cm digging bucket 60 cm digging bucket 80 cm fixed grading bucket 80 cm hydraulic grading bucket Matching trailers also in stock. All information subject to change without notice. Inspection possible at any time by appointment. We accept trade-ins of your old machine. For inquiries, please include your complete address and email address! We are your Sunward dealer for the following regions: District of Wittenberg, District of Nordsachsen, District of Leipzig, City of Leipzig, District of Elbe-Elster, District of Oberspreewald-Lausitz, City of Cottbus, District of Spree-Neiße, District of Oberhavel, District of Barnim, District of Märkisch-Oderland, City of Frankfurt Oder, District of Oder-Spree, District of Dahme-Spreewald, District of Teltow-Fläming, District of Potsdam-Mittelmark, City of Potsdam, City of Brandenburg, District of Havelland, City of Berlin. Pgjdsyq A R Ejpfx Alwet

Condition: good (used), Ideal for pallet racking systems with a frame depth of 800 mm and 2700 mm crossbars. It is also suitable for other applications. Size: 1340*820 mm (55*105 mm) Load capacity: approximately 400 kg/m2 If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and will be happy to assist you with your planning. Further accessories available, such as: Frame, corner, and impact protectors, push-through guards, chipboard, grating, back panel grating, and deep support beams. Shipping: Please request shipping costs, providing your postal code, location, and the desired quantity of items. Pgsdpfx Alshbhavewot Further service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices, as well as prior sale, are subject to change!

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. Pjdofy Txyjpfx Alwegt In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Pgodpegq N Ezjfx Alwet JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: used, Year of construction: 1995, operating hours: 1,589 h, machine/vehicle number: 558B, Equipment: all wheel drive, - Wunderschoner Liebherr shovel loader is in a really good condition directly from the military (Swiss-Army) Well maintained and cared for, - The 508 is a really solidly built wheel loader, just right quality for the military. - Is also no source of oil, makes NO oil stains, is almost as good as new - The cab is glazed all around for a good all-round view! ! - The Liebherr L508 is equipped with: Quick change device 0,8m? Bucket, Pallet forks with log push, Additional hydraulic connections for additional equipment, All-wheel drive, Articulated steering 40 degrees very maneuverable with a small turning circle - Tire size 12.5 R 20 off-road profile, tires are foamed (you can not drive flat) Snow chains are also included, Hydro drive, Highest speed 25 Km / H, Displacement 2732 cm? 4 cylinder series Deutz BF4L1011 T with Turb,24Volt power supply, - TUV can be made NEW on request for an extra charge !!! - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Call 0049 (0)2248 Greetings, your Philipp from the Hanfbach valley Pgedpfjqx S Alex Alwot

Year of construction: 2026, condition: new, functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Here are key features and information about cement clinker grinding mills: Pjdjq Nfbhspfx Alwsgt 1. Raw Materials: - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, Separator element for pallet racking system. Suitable for frames with a depth of 1000-1050-1100 mm. Arm length: 500 mm For a 2700 mm bay with 6 arms, 24 pieces – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms, 46 pieces – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms, 4 pieces – 51 EUR + VAT/piece If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available include: Frame, corner, and impact protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code, location, and the desired quantity of items. Pjdpsk Tzzlefx Alwjgt Further service offerings: Planning, shelving assembly/disassembly, purchase/sale Subject to changes and errors in technical data, specifications, and prices, as well as prior sale!

Condition: new, Semi-automated nailing machine for production of complete pallets in two steps. How does it work? Blocks and leg boards are fed manually in the left fixture. The machine nails the parts together automatically. The ready-made legs are moved by hand to the right fixture, where deck boards are manually placed on top of the legs and nailed together automatically. Both fixtures run simultaneously. The machine starts by pushing a button and the finished pallets are manually pushed out in the back of the machine. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Pallet size: Min / max length of deck & legs: 600 mm - 1 600 mm Min / max width of deck: 600 mm - 1 300 mm Specifications: Operators | 2 Length | 3,5 m Height | 3,6 m Power | 14 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 300L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 500 pallets/8h Standard equipment: 1 channel for legs 1 channel for pallet assembly 1 pallet matrix interchangeable 1 leg matrix adjustable Operators terminal for production control Program for saving nail positioning Nailing System | Hydraulic beam nailing, 3 nail boxes, 30 nailing hammerheads Pgjdpjl Awy Dsfx Alwot

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Psdpfx Aleibx S Newogt Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Podpfxeixqg Ns Alwegt Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Pjdpfx Ajfnvviolwjgt Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 Pedpfx Asyq Szmjlwegt total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions