Plate Shear - Hydraulic

BAYKAL HGL 3100 x 6

Condition: used, Year of construction: 2000, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes 20 Hub/min oil volume 160 ltr. cutting angle 1.6 ° Control ELGO Number of working hours ~ 1.100 h total power requirement 11.0 kW weight 5250 kg range L-W-H 3800 x 1940 x 1560 mm Iodpfx Ajxacfasn Doia from a maintenance workshop with only approx. 1.100 operating hours (!!) Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit * for electric back stop * Input of target/actual position value possible - NC electro-motoric back stop * travel path of back stop X = 750 mm * back stop ball screw with no play * travel speed 100 mm/sec - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/interference protection - 1x side stop with T-slot & millimeter scale - 2x front support arms - original operating instructions including CE declaration

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Ijdpfx Aecblc Ssn Deia space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Isdpfx Aorfx Utjn Djia Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Iodpfju Rni Hex An Djia Stroke counter Machine feet *

Condition: used, Year of construction: 1999, tube diameter bis 60 mm weight of the machine ca. 1,8 t Isdpjvvnm Sofx An Dsia

Condition: new, table diameter 330 mm table load 220 Kg swivelling range 135 Grad Ijdpsh D Svcsfx An Dsia tilt adjustment: manually/mechanicall manuell turning speeds max. 5 U/min stufenlos table load capacity 100 kg. vertikal total power requirement 0,125 kW weight of the machine ca. 48 Kg dimensions of the machine ca. 640 x 440 x 630 m

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical data: -Load capacity 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable Iedpjdd Ilxjfx An Doia -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, - type 6 PTF, BJ. 97 - space requirement approx. B 1100 x H 1300 x T 1600 mm -Weight approx. 300 kg

Condition: ready for operation (used), A mint-condition 2-axis precision lathe Knuth is available. Turning diameter over bed/support/without bridge: 800mm/570mm/1035mm, max. workpiece length: 1500mm, bed width: 400mm, travel X/Y: 420mm/230mm, top slide swivel range: 70°, speed: 1600rpm, spindle bore: 105mm, rapid traverse X/Z: 2m/4m/min, quill diameter: 90mm, quill stroke: 235mm. Machine dimensions X/Y/Z: approx. 3250mm/1150mm/1950mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Ijdpoxx Udrofx An Djia

Condition: used, Year of construction: 1990, power: 22 kW (29.91 HP), pressing force: 135 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 5,000 kg, empty load weight: 5,000 kg, working width: 1,350 mm, operating pressure: 340 bar, cylinder diameter: 90 mm, opening width: 400 mm, plate width: 1,350 mm, pressure: 340 bar, space requirement height: 2,100 mm, space requirement length: 3,150 mm, space requirement width: 1,500 mm, transport length: 3,150 mm, transport width: 1,500 mm, transport height: 2,100 mm, No. 04516 Veneer press Ott ST 2513/135 Used, year of construction 1990 Aluminium heating plates with protective foil 2550 x 1350 mm LW Total pressure 135 tons Specific pressure 4.4 - 6.0 kg/cm2 6 hydraulic cylinders with diameter 90 mm Maximum operating pressure 340 bar Heating plates electrically heated 2x emergency stop safety line all around Opening width 400 mm, infinitely adjustable 4 heavy longitudinal beams in the press table ensure enormous stability Pull-out material support on the left front side Button control for close - open - stop Total electrical connection approx. 22 kW Transport dimensions approx. 3150 x 1500 x 2100 mm LWH Weight approx. 5000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Iedpfx Aeykt H Ren Djia Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system Iisdpfxsvuz Tpo An Dsa - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions