Used Wörner Central Lubrication for sale (9,527)

Condition: used, - Semi-hermetic refrigeration unit - Refrigerant type: Gas R22 - Number of compressors: 3 - 2 Dorin = H2500CC - 1 Bitzer = 4-25Y - 1 air condenser with 8 fans - Bitzer compressor 4-25Y - Refrigerant: R134a - Suction gas temperature: 20.00 °C - Operating mode: Automatic - Power supply: 400V-3-50Hz - Capacity control: 100% - Technical specifications of the semi-hermetic compressor DORIN H2500CC: - Number of cylinders: 4 - Cylinder diameter: 68 mm - Stroke: 60 mm - Displacement at 50 Hz: 75.83 m³/h Rodpfx Akjw Dvd Hewju - Displacement at 60 Hz: 91.00 m³/h - Suction valve: 54 mm - Discharge valve: 28 s.mm - Oil charge: 3.5 l - Net weight: 185 kg

Condition: excellent (used), turning diameter over cross slide: 1,100 mm, spindle bore: 102 mm, turning diameter: 1,600 mm, turning diameter over bed slide: 1,950 mm, center height in crank: 800 mm, Lathe Gurutzpe Super BT 800 x 2000 mm e.p,with dimension display,turning on bed 1580mm,on cross slide 1100mm,on the neckline 1950mm,length of the neckline in front of the chuck 620mm,shank hole 102mm,36 speeds 2,8-400rpm,motor 30cv,4-jaw independent chuck diameter 1400mm, bed width 800mm, tailstock shaft diameter 180mm, lathe with dimension display, max weight on lathe between points 10tns with one steady rest 12tns, estimated weight of lathe and tooling 14450kg. Rodpfx Aeq R Rknskwju

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Central plant Knoll Central plant for shavings / cutting fluid. Can handle up to 10 machines at a time. Parts of the plant: Knoll FKA / 1820 Knoll AE 1114.800 Knoll VRF / 900 Redpfjtltcrex Akwsu Dimensions approx: 400x400x330 cm

Condition: good (used), Year of construction: 2007, Motan Centralconveying control Metronet Light für 8x Abscheider Rjdperun Sdsfx Akwju year: 2007 price: 3.750 € contact: Mr. Rainer Eckerle

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm Rodpfxey T Eb Tj Akwju 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Rsdpsy T Edhefx Akweu Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12952*19912, Year of construction: 2020, This forklift is a returned leasing vehicle. The technical data correspond to the information listed on the original invoice. The seller assumes no liability for this information. TECHNICAL DETAILS Lifting height: 19,065 mm Overall height: 10,490–19,710 mm Side shift: ±600 mm Tilt compensation: ±6° Mechanical height compensation: 200 mm Load center: 1,220 mm Turning radius: 6,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Drive system Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW Torque: 1,175 Nm Engine speed: 1,600 rpm Displacement: 7.7 l Cylinders: 6 Emission standard: EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 Track width: 4,600 mm Hydraulic system Filtration: 10 µm Accumulator pressure: 60 bar Accumulator volume: 2 l Electrical system System voltage: 24 V Cabin Cabin length: 1,605 mm Cabin width: 1,480 mm Cabin height: 1,620 mm Connection: 24 V / 10 A Tyres Tyre type: 14.00 x 24" PR: 24 EQUIPMENT Box-frame chassis Bolted tanks Mudguards Crane lifting eyes Turbo-II air filter Wheel nut protection HLL filter Oil tank preheating LED lighting Reversing alarm Beacon light MD4 touch display Rodpfx Akjy T Ed Ijwou Drive login system Cab ventilation Interior rearview mirror Clothes hook Side mirrors Air horn USB port Central lubrication system Reversing camera Fire extinguisher Anti-slip strips Cabin protection frame

Condition: new, Year of construction: 2025, STATIONARY CONCRETE BATCHING PLANT S130-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 130m³/hour freshly compressed concrete Mixer Capacity : 4500/3000 lt (3m³ Compressed Concrete) Total Motor Power : 168kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 130 m³/h Air Compressor Capacity : 1300 lt/min Aggregate Hopper : 4 Bins:4×30 = 120m³ Mixer Type : TWIN Shaft (3m³). 4500/3000 lt capacity Aggregate Conveyor Band : 1000 mm * 32000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Rodpfx Ajflz Idjkwsu Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Rodpfx Aey Uiyvskwju Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, Mobile Concrete Batching Plant PROMAX M120-TWN (120m³/h) Plant Type : Mobile Concrete Batching Plant with TWIN SHAFT MIXER Plant Capacity: 120m³/ hour freshly compressed concrete Mixer Capacity: 4500/3000 lt (3m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access Crobtjflz Hqouhm N Aeb The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. Rsdpfx Akewhxptswou * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. *Aggregate Feeding system. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 59978, functionality: fully functional, BIESSE SKIPPER 100 CNC Drilling and Machining Center For sale: BIESSE SKIPPER 100 high-performance CNC through-feed machining center designed for drilling, routing and grooving operations in furniture production and panel processing. The machine offers excellent productivity, high machining accuracy and compact industrial construction. Technical Specifications Manufacturer: BIESSE Model: SKIPPER 100 Axes X-axis travel: 3,000 mm Y-axis travel: 1,000 mm Z-axis travel: 60 mm Workpiece Dimensions Length: 90 – 3,000 mm Width: 70 – 1,000 mm Thickness: 8 – 60 mm Spindle Unit HSK electrospindle Spindle speed: 6,000 – 18,000 rpm Spindle power: 3.5 kW Total installed power: approx. 20 kW Drilling Units Per operating unit: 29 vertical drilling spindles 8 horizontal drilling spindles along X-axis 2 horizontal drilling spindles along Y-axis Total: 78 independent spindles Upper and lower machining units Equipment Automatic panel size detection Electronic thickness control Central automatic lubrication Rodpfxjzatrrj Akwju BiesseWorks software Roller loading table Unloading conveyor Dust extraction connections Safety enclosure Machine Dimensions Overall length: 7,290 mm Overall width: 4,400 mm Height: approx. 2,000 mm Weight: approx. 2,700 kg The machine is in good working condition and can be inspected under power by appointment. Photos, videos and additional technical information available upon request.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells Rjdey Umkfepfx Akwju – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: new, Year of construction: 2025, Plant Type : Mobile Concrete Batching Plant with SINGLE SHAFT MIXER Plant Capacity: 60m³/ hour freshly compressed concrete Mixer Capacity: 1500/1000 lt (1m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Redpfewn Exhjx Akwju Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. *EASY TRANSPORTATION *MINUMUM INVESTEMENT FOR FIELD GROUNDWORK *QUICK INSTALLATION

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations) Rsdpfezadatex Akwou

Condition: excellent (used), Catalogue number 7959 TECHNICAL DATA - Track width: 250 mm - Shaft width: 250 mm - Maximum saw blade diameter for multi-blade saw: 350 mm - Saw blade bore diameter: 70 mm - Maximum cutting height for multi-blade saw: 120 mm - Table width with clearance: 830 mm - Table length: 1780 mm – Top section: - Kickback devices - Pressure roller, sliding, metal, smooth - Kickback devices - Pressure roller, sliding - Shaft with saw blades - Pressure roller, sliding, metal, 2 pcs – Bottom section: - Guide rail - Kickback devices - Track (caterpillar) - Electric body up/down adjustment - Manual adjustment of shaft with saw blades - Central lubrication - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 37 kW - Extraction port diameter: 170 mm Rjdpezab R Njfx Akwou - Overall dimensions (L/W/H): 2000x1500x2000 mm - Weight: 1850 kg ADVANTAGES – German-made – Used multi-blade saw, in very good condition Net price: 45,900 PLN Net price: 10,930 EUR depending on the rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: excellent (used), Catalog number: 7294 TECHNICAL DATA - Max. width of workpiece: 230mm - Min. width of workpiece: 15mm - Max. height of workpiece: 160mm - Min. height of workpiece: 10mm 7 spindles: 1) Horizontal, lower, 230mm, 7.5kW 2) Vertical, right, 160mm, 5.5kW 3) Vertical, left, 160mm, 5.5kW 4) Vertical, right, 160mm, 5.5kW 5) Horizontal, upper, 230mm, 7.5kW 6) Horizontal, upper, 230mm, 7.5kW 7) Horizontal, lower, 230mm, 5.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm Rodpfx Aszab Nfskwou - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - Motor: 2 x 0.37kW - Spindle diameter: 40mm - All spindles equipped with a brake From above: - 8 feeding rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, pulling, rubber, double From below: - 1 feeding roller, toothed, pulling, swiveling - 3 discharge rollers, pulling, metal, smooth - Rollers are pneumatically pressed - Length of the feeding table: 2480mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth feed speed adjustment via frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Diameter of the dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5520x1930x1900mm - Weight: approx. 4000kg ADVANTAGES - 7 heads - Ideal for both wet and dry wood - With ATS - Original DTR + CE documentation - Unpainted - Used planer, in perfect condition Original photos Net price: 156900 PLN Net price: 37360 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number 7713 TECHNICAL DATA - max. width of workpiece 240mm - max. height of workpiece 130mm - 6 spindles: 1) horizontal lower 240mm, 7.5kW 2) vertical right 130mm, 5.5kW 3) vertical left 130mm, 5.5kW 4) horizontal upper 240mm, 7.5kW 5) horizontal upper 240mm, 5.5kW Spindles 4 and 5 are electrically adjustable up/down 6) horizontal lower 240mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm *top: - 8 metal feed rollers, toothed, including 3 double rollers - 4 smooth rubber feed rollers, including 2 double rollers *bottom: - 3 smooth feed rollers - 3 side pressure rollers - stepless feed speed adjustment via inverter Redpfxszab Eys Akwsu - rollers with pneumatic pressure - feed motor 7.5kW - feed via Cardan shafts - electric adjustment of planing thickness - body lifting motor 0.75kW - length of infeed table 2480mm - pneumatic opening/closing of the guard - pneumatic blowing of the table - central lubrication of the table - diameter of dust extraction nozzles 3x120mm, 3x150mm - dimensions L/W/H 5300x1700x1800mm - weight 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the guard - Pneumatic blowing of the table - Spindles 4 and 5 are electrically adjustable - Used planer, very good condition Net price: 116900 PLN Net price: 27850 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades Rodpjzab Disfx Akwju - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws Rsdpfx Aezab A Sjkweu - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm - Weight: 2700kg – Used multi-blade saw – Very good condition Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)

Condition: excellent (used), Catalogue number 7446 Rodpfxszabx He Akwsu TECHNICAL DATA - Track width: 340mm - Roller width: 400mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm - Table width with clearance: 700mm - Table length: 1720mm From above: - Pawls - Metal slip pressure roller - Pawls - Metal slip pressure roller - Shaft with saw blades - Two metal slip pressure rollers From below: - Guide bar - Metal slip roller - Pawls - Track - Central lubrication - Variable feed speed adjustment 1.5kW - Main motor: 37kW - Extraction outlet diameter: 240mm - Overall dimensions (L/W/H): 1900x1750x1980mm - Weight approx.: 3000kg ADVANTAGES – German made – Variable speed control – Insert for short workpieces – Used multi-blade saw, in very good condition Net price: 79,900 PLN Net price: 19,000 EUR depending on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - track width: 360 mm - shaft width: 350 mm - max. saw blade diameter: 350 mm - blade hole diameter: 80 mm - max. cutting height: 120 mm from above: - pawls - toothed feed shaft - pawls - smooth sliding shaft - shaft with saw blades - pressure sliding shaft from below: - 2 sliding rollers in front of the table - guide - pawls - track - central track lubrication - electric lifting of the saw blade shaft Rsdpfx Aszabwiskwsu - electric body lifting - stepless feed speed control - feed motor approx. 2.5 kW - main motor 30 kW - overall dimensions L/W/H 2500x2300x1900 mm - weight approx. 4000 kg ADVANTAGES – Czech manufacture – 2 sliding rollers in the table – used multi-blade saw – very good condition Net price: 31,900 PLN Net price: 7,600 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of significant exchange rate changes, the price may be adjusted)

Condition: excellent (used), Catalogue number 7961 TECHNICAL DATA - Track width: 250mm - Shaft width: 250mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 100mm - Table width with clearance: 940mm - Table length: 1700mm Top: – Pawls/kickers – Metal pressure roller, smooth – Shaft with saw blades – Metal pressure roller, smooth, 2 pcs Bottom: – Guide rail – Pawls/kickers – Smooth sliding roller – Track chain – Central lubrication – Feed motor 4kW – Main motor 37kW – Stepless feed speed control – Manual body lift – Manual shaft lift (with saw blades) – Extraction port diameter: 200mm – Overall machine dimensions (LxWxH): 1800x1500x1700mm – Weight: 1956kg ADVANTAGES – German made – Stepless feed speed adjustment – Used multi-saw in very good condition Net price: 22900 PLN Net price: 5450 EUR (based on exchange rate 4.2 PLN/EUR) Redpfx Ajzabu Iskwou (Prices may change with stronger fluctuations)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW Redozabi Eepfx Akwju - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: Rjdjq I Nxdjpfx Akwju - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Condition: excellent (used), CATALOG NUMBER 7220 TECHNICAL DATA - Min – max working width: 20 – 230mm - Min – max working height: 8 – 160mm 7 spindles: 1) Lower horizontal 230mm 5.5kW 2) Right vertical 160mm 5.5kW Rjdey Ux Shopfx Akwou 3) Left vertical 160mm 5.5kW 4) Right vertical 160mm 5.5kW 5) Left vertical 160mm 5.5kW 6) Upper horizontal 230mm 7.5kW 7) Lower horizontal 230mm 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindle speed: 6000rpm From above: - 10 toothed steel infeed rollers, including 2 double rollers - 3 lateral pressure units From below: - Lateral pressure unit at the infeed - Toothed steel twisting feed roller in lower table - 2 lateral pressure units - Ribbed worktable - Ribbed steel feed roller - Smooth steel feed roller - Pneumatically adjustable rollers - Infeed table length: 2410mm - Centralized table lubrication - Electric thickness adjustment - Body raising motor: 1.1kW - Stepless feed speed adjustment via inverter: 6–30m/min - Feed motor: 5.5kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameter: 7x160mm - Dimensions (LxWxH): 5100x2190x1800mm - Weight: 5400kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry wood – DTR technical documentation included – Used planer, very good condition Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change significantly if the exchange rate fluctuates)