Used Weingarten Ar 100 for sale (33,450)

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Construction Material: Stainless Steel Prjdpfszfh U Dox Alwob Horsepower: 1.5 kW Jacket: No

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm Podoxuv Htjpfx Alworb ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,401 h, load capacity: 1,000 kg, lifting height: 1,880 mm, free lift: 860 mm, fuel type: electric, construction height: 1,560 mm, fork length: 1,150 mm, drive type: Elektro, Vertical order picker Predpfx Ajz El Sdolweb Load centre: 600 Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Polyurethane Rear tyres type: Polyurethane Battery voltage: 24V Battery capacity: 620Ah Battery year of manufacture: 2021 Description:

Condition: used, maximum load weight: 2,549 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,750 mm, loading space height: 345 mm, total width: 2,010 mm, total height: 680 mm, A40 NG000588, Three-way tipper trailer with tandem axle, manufacturer STEMA, model TRIUS SHDK .2 Zink-BW, gross weight: 3,500 kg, high-loader, hydraulically tiltable with electric pump, rear pendulum tailgate, 3.01 m x 1.83 m. Prjdpjyn Uhkjfx Alwjb 3,500 kg, overrun braked, high-loader, electric pump, aluminum paneling, rear pendulum side panel. Errors and prior sale excepted, vehicle not prepared.

Condition: used, maximum load weight: 660 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 1,125 mm, total width: 1,510 mm, total height: 1,125 mm, A64 GWN01572722 Predpfeyqdmzox Alwjb Low-loader trailer Unsinn, type WEB T 2111-7-13, tarpaulin and frame, internal height 125 cm, gross vehicle weight 750 kg, 100 km/h, Vehicle not prepared Errors and prior sale excepted.

Condition: used, machine/vehicle number: 008648, Max. working width: 1300 mm Max. working thickness: 60 mm Extraction system: dry Number of painting guns: 4 Use: for paint Psdezmmulopfx Alwerb

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Spindle press: Hand spindle press -Pressure: max. kg -Stroke: 60 mm Predpfxoz Egh Te Alwob -Intermediate dimension: 200 mm -Dimensions: 1020/600/H1520 mm -Weight: 120 kg

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm Prodpsu Nfi Uefx Alwob throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 02.056.00, overall weight: 11,000 kg, space requirement length: 2,420 mm, space requirement width: 2,040 mm, space requirement height: 3,220 mm, TECHNICAL DATA: Podpfx Aloupy Aboworb - Pressing force (infinitely variable): 1000 kN - Max.ejector force: 30 kN - Retraction force: 300 kN - Pressing speed: 8 mm/sec. - Rapid traverse: 48 mm/sec. - Opening speed: 44 mm/sec. - Retraction speed: 23 mm/sec. - Press travel (stroke): 600 mm - Spray nozzle stroke: 70mm - Max.spray volume: 5 dm3 - Surface Ram top: 1000 x 1200 mm - Surface Ram below: 998 x 1280 mm - Distance between columns: 1130 mm - Plane parallelism between upper and lower plate: +/- 0.1 to 600mm lenght with uniform load distribution - Maximum mould weight: 7000 kg - Load capacity of swivel plate: 3500 kg - Power connected load: 30 kW - Motor power: 7.5 kW - Sprays pressure max-min.: 4 - 10 bar - Max.flow pressure: 190 bar - Return pressure: 190 bar - Air comsumption injection: 20 - 50 Ndm3 - Tank: 140 l

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, input current: 32 A, I am selling a spray washing system in very good condition, ready for immediate use. The system was manufactured in Finland and has seen very little use. The last photo shows a new machine, still in production today, in its original condition. Manufacturer: Sampo, Model: SR 100. Completely made of stainless steel. The machine is insulated and equipped with an oil separator and a flue gas extraction system. Temperature control up to 90°C and timer. Pressure: 5.5 bar. Round filling area: 100 cm. Height: 75 cm. The machine is ready for immediate operation. A video can be sent upon request. Prjdpfx Ajz Eiitslwjb Shipping to all EU countries is possible.

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Pneumatic cylinder: ZIDP 200/100 -Stroke travel: 100 mm -Piston diameter: 200 mm Prodpogrzvcofx Alweb -Piston rod: Ø 40 mm -Dimensions: 220/220/H450 mm -Weight: 23.5 kg

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: AA1/015841, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 6,050 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of slots in tool magazine: 12, total length: 7,250 mm, total width: 2,420 mm, overall weight: 4,800 kg, table length: 6,050 mm, table width: 1,240 mm, Equipment: CE marking, SCM RECORD 100 AL XL CNC machining center, manufactured in 2006. A machine from the renowned Italian manufacturer, SCM Group, designed for professional processing of wood, MDF, plywood, chipboard, and other wood-based materials. Model: RECORD 100 AL XL Year of manufacture: 2006 Weight: 4800 kg Power supply: 400 V / 3 phases / 50–60 Hz Rated current: 62 A Technical specifications Working area / axes: X-axis: 6050 mm Y-axis: 1240 mm Z-axis: 200 mm Rapid traverse X: 60 m/min Rapid traverse Y: 45 m/min Rapid traverse Z: 30 m/min Electrospindle: manufacturer: SCM power: 8.5 kW maximum speed: 24,000 rpm tool holder: HSK-F63 automatic tool changer automatic magazine: 12 HSK-F63 tools Drilling unit: 7 vertical spindles 5 horizontal/angled spindles capability for vertical and side drilling Vacuum system: Pjdpszynkhjfx Alwsrb 2 × Becker VTLF 250 vacuum pump performance of one pump: 248 m³/h at 50 Hz total rated performance: 496 m³/h power of one pump: 5 kW vacuum: 200 mbar Other equipment manual manipulator for machine operation table with vacuum clamping system capability for processing parts with a length of over 6 meters central chip extraction system from the machining head brush guard for the machining head safety mats complete enclosure of the working area CE marking The machine has a large working area of 6050 × 1240 mm, making it suitable for both standard panels and the processing of very long parts. The powerful 8.5 kW / 24,000 rpm / HSK-F63 electrospindle, automatic tool changer, and 12-position HSK magazine allow for the performance of various operations without manual tool changes. An additional advantage is the drilling head equipped with 7 vertical and 5 horizontal spindles, as well as a highly efficient vacuum system with two Becker VTLF 250 pumps with a total rated performance of approximately 496 m³/h. The machine has a solid, industrial-grade construction – weight 4800 kg.

Condition: used, mileage: 1,81,468 km, power: 110 kW (149.56 HP), first registration: 04/2000, fuel type: diesel, empty load weight: 5,750 kg, maximum load weight: 249 kg, overall weight: 5,999 kg, axle configuration: 4x2, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 6, * German vehicle * 1st hand * Condition see pictures * Ruthmann aerial work platform * Type K 120 * 12 m working height * 7.05 m lateral outreach * only 8,813 operating hours * Workman basket with 200 kg. load * 1,000 V insulated workman basket * 180 ° angle of rotation * Workman basket size 1.30 m 1.00 m * 2-fold hydraulic support * Total vehicle height 3.55 m * 6 seats * Yellow rotating beacons * 5-speed transmission * Roof hatch * Aluminum checker plate cladding * Loading area 1.80 m x 2.45 m * Aluminum tail lifts * Emergency steering * Wheelbase 3.80 m * gross vehicle weight 5,990 kg * Self-propelled working machine and therefore free driving in all environmental zones If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Prsdpfjy Rfunox Alweb Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Year of construction: 2016, operating hours: 1,430 h, lifting height: 2,890 mm, mast type: duplex, battery voltage: 24 V, fork length: 1,200 mm, Empty weight: 940 kg Lifting capacity: 1.000 kg Supply voltage: 220 V CE mark: yes Technical condition: good Visual appearance: good Podpfxjzayy Ae Alwjrb Please contact Bas Sindorf for more information

Condition: new, Year of construction: 2026, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 410 mm, turning length: 100 mm, total length: 1,940 mm, total width: 850 mm, total height: 1,320 mm, bed width: 250 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, overall weight: 1,550 kg, Technical data Turning diameter over bed: 410 mm Turning diameter over cross slide: 255 mm Turning diameter in gap: 580 mm Turning length in gap: 190 mm Distance between centers: 1000 / 1500 / 2000 mm Bed: induction hardened Bed width: 250 mm Spindle bore: 52 mm Spindle nose: D1-6 Spindle taper: Morse taper No. 6 Spindle speed range: (16) 45 – 1800 rpm Maximum tool size: 20 x 20 mm Longitudinal feed range: (17) 0.05 – 1.7 mm/rev Cross feed range: (17) 0.025 – 0.85 mm/rev Metric threads: (42) 0.2 – 14 mm Inch threads: (45) 2 – 72 T.P.I Module threads: 0.3 – 3.5 M.P. Diametral pitch threads: 8 – 44 D.P. Tailstock quill diameter: 50 mm Tailstock quill travel: 120 mm Prodpfxsytnzns Alwob Tailstock taper: MT4 Digital readout: 3-axis DRO Coolant pump power: 0.1 kW Overall dimensions (L x W x H): 1940 x 850 x 1320 mm Motor power: 3.3 kW Weight: 1550 kg Equipment 3-jaw chuck 200 mm 4-jaw chuck 250 mm Faceplate 250 mm Driving plate 350 mm Steady rest Follow rest Spindle reduction sleeve Dead center Coolant system Halogen work light Thread dial indicator Tool kit Sales conditions The machine is brand new. 12-month warranty Warranty service Post-warranty service Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,650 mm, fork length: 2,100 mm, empty load weight: 12,800 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN USE Our forklifts are completely overhauled according to FEM-4.004 and the latest safety standards—guaranteeing maximum quality and your safety. From frame to battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide transport & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and get advice on site—let us find the right solution for you. Industrial Truck Data: Manufacturer: Heli Model: Counterbalance Forklift CPCD100-G3-CU Drive type: Diesel Load capacity: 10,000 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,500 mm Mast type: Triplex Free lift: No Overall height: 3,650 mm Fork length: 2,100 mm Unladen weight: 12,800 kg Tyres: Solid rubber Model type: CPCD100-G3-CU Cab type: Full cabin – windscreen, roof & rear window + steel doors (suspended) Pedpfx Aey Rqlljlwerb Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road traffic approval equipment for possible limited public road use: indicators, rear lights, reversing light, reflectors, etc. Attachment: Sideshift Attachment: Fork positioner Attachment: Additional hydraulic circuit—routed to fork carriage

Condition: like new (used), functionality: fully functional, mileage: 29,000 km, first registration: 06/2026, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, number of seats: 2, loading space length: 4,100 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2006, Equipment: ABS, airbag, central locking, crane, Iveco Eurocargo 100E18 4x4, 29,000 km, Fassi F65.24 crane, fixed bed, 4100x2400x600 dimensions, registered 06/2006. Vehicle in like-new condition. Price: €52,500.00. Vehicle not subject to VAT. Prsdpjzggbfefx Alwob

Condition: ready for operation (used), Fanuc A16B-1211-0291/03A Axis Board, used, shows normal signs of wear, 100% functional. Pedpfx Aei D U Apjlworb

Condition: good (used), • Model – FMF 100 • Double-sided drilling machine • Min. diameter: 3 mm • Max. diameter: 300 mm • Speed: 110 – 4600 rpm Prsdjuqma Aspfx Alwob • Lower drill with automatic feed, upper drill guided manually

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Pedevvlyijpfx Alwjrb Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 25 kg, total length: 350 mm, total width: 260 mm, total height: 210 mm, volume flow: 30 m³/h, input frequency: 50 Hz, type of cooling: air, rotational speed (max.): 2,850 rpm, warranty duration: 12 months, protection type (IP code): IP55, Oil lubricated rotary vane vacuum pump. Available in stock. Completely new. 12 months warranty Predpjftzx Eofx Alwsb Nominal flow: 25 m3 / h at 50Hz. Ultimate pressure: 2 mbar abs, Any clarification, do not hesitate to contact us.

Year of construction: 1966, condition: good (used), Used, well-maintained eccentric press, Weingarten, with pneumatic retraction, piece counter, documentation, press test book, spare parts (2 pallets). Pressing force: 1500 kN (150 tons) Stroke: 60 mm Ram, small/large stroke: 10 – 140 mm Overhang: 550 mm Pjdpfx Asir I Slolworb Cylindrical mounting: 30 mm Table width x depth: 1200 x 1000 mm Dimensions width x depth x height: 150 x 270 x 290 cm Weight: 13,500 kg Technical data and dimensions: Subject to change without notice.

Year of construction: 1998, condition: used, dryer dry-air KOCH CKT 1000 1000 m³/h year: 1998 price: 10.900 € contact: Mr. Rainer Eckerle Podpfx Aleity Adswjrb

Condition: new, Siemens 6ES7842-0CE00-0YE0 Software SN S VPWN1005742,unused, in sealed original box, 100% functional, scope of delivery according to photos Prsdpfopnpn Tex Alweb

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm ram surface 560x355 mm Predpfx Alolp U Ddeweb hole in the table Ø 280 mm table height 800 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1600x2200x3000 mm