Used Auerbach Fw 250 X 1000 / 2 for sale (1,04,811)

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW Ncsdpew Dugajfx Afljw weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. *

Condition: new, Year of construction: 2025, overall weight: 1,800 kg, total height: 600 mm, total length: 2,000 mm, total width: 1,000 mm, plate height: 600 mm, groove spacing: 140 mm, GERD WOLFF Clamping cube 2000 x 1000 x 600 mm If you cannot find the size you require, simply send us an email with the completed PDF form. This will enable us to offer you a customised plate tailored to your requirements. T-slots – size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Ncodpfx Aexbpihefljw Edge distance: 80 Weight: 1800 kg Cast iron quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Clamping cube, cubic clamping table, multi-sided clamping, angle clamping cube, precision cube, CNC clamping cube, clamping angle, machine cube, 90-degree clamping device, drill hole cube, modular clamping cubes, workpiece positioning, assembly cube, fixing cube, clamping block

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand Ncsdpfx Asxak D Reflow including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, 6,5 mm ST 40 3,5 mm VA 90° Grad blade length 250 x 250 mm table: 810 x 750 mm work height max. 950 mm engine output 4,0 weight 630 kg range L-W-H 810 x 750 x 1150 mm Characteristics : Ncedpfx Ajxcux Doflow - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Power 75 kW Cassel metal detector Including control cabinet Ncsdpfx Ajy Adk Esflow

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Njdstyyn Hjpfx Aflocw

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 9520190, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 30,000 rpm, overall weight: 3,300 kg, In July 2025, the drive module, hard disk module, PLC card, and the screen module with keyboard were replaced at a cost of €24,000. A replacement spindle can be purchased separately for €4,000. TECHNICAL DETAILS Nedeymmtvjpfx Aflscw X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 560 mm Spindle speed: 30,000 rpm MACHINE DETAILS Interface: USB WiN PCIN Control: Siemens Sinumerik 840 C Weight: 3,300 kg Voltage: 380 V 50 Hz Rated current: 38 A EQUIPMENT Central lubrication system

Condition: reconditioned (used), Robotic welding system with a two-station positioner. For sale: a robotic welding system from Yaskawa Motoman, including an RM2-500 positioner. Robot: EA1400 NX100 and so on. We can assemble and commission the system. We also offer training and instruction. The system will be refurbished according to the customer's requirements. We are a YASKAWA system partner and offer you complete service for your Motoman robot and your systems. Ncsdpfx Afogttytsljw

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Nodpfx Asl Tnz Eoflecw Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: new, Ostas 4-Roller Plate Rolling Machine 4R OHS 2570 x 250 Nsdpfsxrdcdjx Aflocw Hydraulic Side Roll Adjustment 3 Digital Readouts Hydraulic Drop-End Hardened Rolls Conical Bending Device Separate Control Panel Roll Length: 2570 mm Top Roll Diameter: 250 mm Side Roll Diameter: 200 mm Total Motor Power: 7.5+1.5 kW Weight: 6300 kg Dimensions (mm): 4550 x 1550 x 1470 (L x W x H) Bending Performance Data 10 mm at minimum inner diameter (5 x top roll) 8 mm at minimum inner diameter (1.5 x top roll) Pre-bending Performance Data 8 mm at minimum inner diameter (5 x top roll) 6 mm at minimum inner diameter (1.5 x top roll) All bending capacities are calculated based on 250 N/mm² yield strength Material: ST 37 – ST 42 structural steel The images shown are for illustration purposes only.

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3070 x 250 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Cone bending device Separate control panel Roll length: 3070 mm Top roll diameter: 250 mm Side roll diameter: 200 mm Total motor power: 7.5 + 1.5 kW Weight: 9800 kg Ncsdpjyaqmasfx Aflew Dimensions (mm): 5050 x 1550 x 1470 (L x W x H) Bending performance data 9 mm at minimum inner diameter (5 x top roll) 7 mm at minimum inner diameter (1.5 x top roll) Pre-bending performance data 7 mm at minimum inner diameter (5 x top roll) 5 mm at minimum inner diameter (1.5 x top roll) All bending capacities are based on a yield strength of 250 N/mm2 Material: (ST 37 – ST 42 structural steel)

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, stroke length: 250 mm, operating speed: 100 mm/s, reverse speed: 90 mm/s, table height: 900 mm, throat depth: 400 mm, total length: 4,550 mm, total width: 2,350 mm, total height: 2,950 mm, overall weight: 15,000 kg, controller manufacturer: CYBELEC, controller model: MODEVA 10S, working width: 3,100 mm, bending force (max.): 250 t, distance between stands: 2,550 mm, installation height: 517 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 6, type of crowning: CNC-controlled, Technical data Njdpfx Afeymyffjlecw NEW INTERMEDIARIES/PUNCHES/DIES. Protective laser Crowning table with CNC CNC CYBELEC MODEVA 10S CNC axes: Y1/Y2/X/R Manual axes: Z1/Z2 Year: 2009 FREESTANDING MACHINE

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Ncjdpjkxhqnefx Aflew Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 700 mm cutting width 250 x 320 mm cutting speed 25 - 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 120 mm 120 mm Nedpfx Afsff Efroljcw 190 mm Impact energy 190 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 1,3 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Ncedpfx Aeupxpmjfljw Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.

Condition: new, turning diameter over bed 250 mm Ncodoupxctspfx Afljw turning diameter over slide rest 140 mm turning length 550 mm turning speeds 125 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Njdpfx Ajgp Dymoflecw Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Ncodovn U Efopfx Aflow Forage protection Set of wheels. Appropriate tools. Base cabinet is optional!!

Condition: new, table length 2000 mm table width 1000 mm table height 920 - 1000 mm weight of the machine ca. 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel Nedpfevn Uycjx Afljcw The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Ribbed bottom for reinforcement. including floor storage Accessories optional!! Accessories shown are optional!!

Condition: new, - Capacity 250 x 8 mm - Hydraulic Nedpsnwlptefx Aflscw - Foot control - Central lubrication system - Emergency stop - Documentation - 400V

Condition: new, – Distance between centers: 1000 mm – Swing diameter over bed: 410 mm – Swing diameter over gap: 580 mm – Swing diameter over cross slide: 255 mm – Spindle bore: 52 mm – 45/1800 rpm – Longitudinal and transverse feed – Digital readout – Brake – Coolant system – Multifix with 4 tool holders Ncsdpfxsw S Ikmj Aflew – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: used, maximum load weight: 11,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: tail-lift, Further information: * Unladen weight: 6,090 kg * Tyre size | Front axle: 445/45 R19.5 * Tread depth inner left | Front axle: 40% * Tread depth inner right | Front axle: 40% * Maximum axle load | Front axle: 9,000 kg * Tyre size | Second axle: 445/45 R19.5 * Tread depth inner left | Second axle: 40% * Tread depth inner right | Second axle: 40% * Maximum axle load | Second axle: 9,000 kg * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Lifting capacity: 2,000 kg * Price on request: Yes * Position | Front axle: Rear * Brake type | Front axle: Disc brakes Ncodoynxbbspfx Aflow * Suspension | Front axle: Air suspension * Position | Second axle: Rear * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Tail lift | Type: Tuck-away and slide tail lift Additional features: * Rear doors * Homepage * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale and errors excepted

Condition: good (used), Year of construction: 2006, total length: 4,000 mm, total width: 2,500 mm, plate height: 300 mm, Manufacturer: PAMA Type: Floorplates Year of manufacture: 2006 2 units available, matching cast iron floorplates/bedplates Integrated levelling chambers Can be used in combination with PAMA SPEEDRAM 1000, Machine 8643 Testing area Mounting area Measuring area Calibration area Specifications Metric / US Standard Length 4000 mm Width 2500 mm Nodpfxswpvcyj Aflocw Height 300 mm Number of T-slots 10 T-slot spacing 250 mm T-slot size 26 mm Weight per plate, approx. 7800 tons Number of matching pieces 2 Dimensions (estimated) Length 4000 mm Width 2500 mm Height 300 mm Weight 7800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual condition. We recommend that you verify all important details.

Condition: used, This listing is for 2 Thermo Scientific E1-clip tip Electronic Pipettes 15-1250ul plus stand Nsdpfx Afsxv Dgqsljcw The Thermo Scientific E1-ClipTip Electronic Pipette with a volume range of 15–1250 µL is available in both single-channel and multichannel configurations. Here are some options:​ Single-Channel Pipette: Volume Range: 15–1250 µL Tip Size: 1250 µL Channels: 1 Bluetooth Enabled: Yes Features: Programmable, adjustable tip spacing, compatible with Thermo Scientific ClipTip tips These pipettes are designed for precision and efficiency in laboratory settings, offering features like electronic tip ejection and Bluetooth connectivity for seamless data management. Physical & Chemical Standards Consumables & Equipment Chemicals Clinical Knowledge Base updated and consolidated product listing, integrating the new details into the previous content for a complete and professional overview: Thermo Scientific E1-ClipTip Electronic Variable 8-Channel Microliter Pipette; 15–1250 µL Capacity Item No.: 9282701 Pack Size: Each Weight: 0.96 kg Country of Origin: Finland

Condition: good (used), Heiber Schröder CE 1000-2 Tray forming machine Two-lane machine, manufactured by Heiber & Schröder, Germany. Manufactured in 2011. Description: The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE film on the inside), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Nodpfx Afszlad Dolscw Includes documentation, tools, accessories, and a Nordson hot and cold glue system.