Used Bauer Aw-S2/200 for sale (20,159)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 11,400 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction, with slight preload in the center, turntable with robust ball bearing race, support wedges with holder, quarter-shell fenders in front of and behind each axle. Tie-down points, low-bed trailer: above the front axle: 2 pairs of ring tie-down points, each 5 tons, at the front on the outrigger low-bed: 4 pairs of tie-down points, each 6 tons, on the sides in the low-bed 5 pairs of tie-down points, each 5 tons, between the longitudinal beams Tow hitch, trailer turntable Tow fork with tested 40 mm drawbar eye, mechanically adjustable in length by 6 x 100 mm and lockable (Tow fork length 1,700 - 2,300 mm) Axles + Suspension BPW drum brake axles, each 10 tons axle load, spring plates. Axle endurance brake test for 105 km/h, rear axle can be manually removed. Air suspension with raising & lowering valve Wheels and Tires 235 / 75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, with connecting lines to the towing vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Hjdpoi Ri N Aofx Afljfk Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, rotating beacon with holder, switched via parking lights (light can be removed), 2 pairs of warning signs, double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pole tamper-proof plugs at the front, with connecting cable, 1 x 7-pole agricultural plug, voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Steel/diamond plate floor on the outrigger, perforated sheet covering between the longitudinal and transverse beams. Axle cover is not designed to be driven over, widening to 3,000 or 3,300 mm is possible. Operating instructions Note! A special permit is required for a 10,000 kg axle load. The permit must be applied for separately in each federal state; the legislator does not have to give a guarantee for 20 tons GVW. Customer risk. A special permit is required if the overall length of the train exceeds 18,750 mm. Observe country-specific registration regulations. The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Observe the BO circle!!! Registration / Signs Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, contour marking with reflective strips according to ECE R 048 Painting Frame at the front hot-dip galvanized incl. passivation, frame at the rear RAL 9006 silver, tow fork KTL black Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space width: 2,520 mm, loading space height: 380 mm, total length: 12,000 mm, total width: 2,550 mm, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Steel welded construction Turntable with robust ball bearing race, storage box recessed in the turntable extension Foldable rear support Chocks with holder Aluminum side impact protection Splash guard at the rear over the entire width Quarter panel fenders in front of the 1st axle Spare wheel holder for 1 spare wheel, with wheel fastening kit Spare wheel, same brand as the standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Tie-down points for low-loader 3 pairs of tie-down points, 10 tons each, integrated in the floor at the front 6 pairs of tie-down eyes recessed in the upper and side parts of the outer frame, 10 tons each 1 x at the neck area, the rest spaced out with a maximum distance of 1200 mm 1 x rear slope 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) Coupling device, trailer, turntable Drawbar with tested 40 mm drawbar eye Axles and Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Wheels and Tires 235 / 75 R 17,5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Voltage converter for 12/24 Volt operation Note! A 7-pin socket, 12 Volt, is required on the tractor/tow vehicle! (Required in conjunction with the voltage converter for electrical system!) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white/red position lights at the rear 2 white position lights at the front Additional LED work lights at the rear, switched on via reversing light 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 x 7-pin agricultural plug Voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Front area: steel floor Then with 70 mm softwood floor, steel/non-slip sheet metal covering in the wheel arch area Rear slope with 70 mm softwood floor Low-loader platform including rear slope 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Covered with wood With spring-assisted support Operating Instructions A special permit is required for an axle load of 10,000 kg. The permit must be applied for separately in each federal state; a guarantee for a 20-ton gross vehicle weight must not be given by the legislator. Customer risk. Country of Registration / Signs Country of registration: Germany Hfedpji Ri Nxofx Afljk With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 Service Hotline Prepared for license plate holder, two-line Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10-year warranty against rust Drawbar galvanized or black, according to manufacturer's choice Loading ramps hot-dip galvanized Note: Archive images!

Condition: new, sheet width 3100 mm plate thickness 6 mm Hfedpfxoyv Nf Io Aflok pre-bending 5 mm upper roll diameter 200 mm min. bending diameter Ø 300 mm bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm

Condition: excellent (used), Optical data coupler (28559) Make Leuze Hfodpsuphhfofx Aflsk type DDLS 200/120.1-60 used from machine dismantling

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 956.67 € 200 x 32 x 32 mm 1 kW 2800 1/min 42 mm 250 mm 470 mm 230 mm 325 x 540 x 310 mm Hjdpey H N Azefx Aflofk Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation .: 317.762 table version ALTERNATIVE VERSIONS: .: 317.774with machine stand, emergency stop buttom and brake .: 317.777 with MA400D integrated extractor, machine stand, emergency stop buttom and brake

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, operating hours: 7,610 h, input voltage: 400 V, input current: 10 A, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, TECHNICAL DETAILS Overall height: 1,650 mm Overall length: 4,400 mm Overall width: 1,000 mm Color: Gray Operating hours: 7,610 MACHINE DETAILS Weight: 2,500 kg Year of manufacture: 2018 Documentation available: No CE marking present: Yes CE certificate available: No Serial number: Itsbn Dztwjy Ewv Tj Tsg Voltage: 400 V Power consumption: 10.3 A Fuse: 16 A Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 1 EQUIPMENT Pre-milling unit Gluing unit Pressure rollers Hodpfxoy Tnuvo Aflefk Cutting unit Rough milling unit Radius pulling unit Corner rounding unit Surface pulling unit Brushing unit

Condition: good (used), Year of construction: 1993, with oil filtration unit Hjdpfoy H H Hqjx Aflsfk Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form.

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Hedpfx Afet D Aptolsfk Year: 1993 Tare: 6900 kg We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Year of construction: 1995, condition: excellent (used), Manual length adjustment via handwheel with digital display. Maximum feed length: 3,000 mm. Pneumatic parking brake. Hsdpsy Tyzzjfx Aflsfk

Condition: used, Year of construction: 1990, Technical details: total power requirement: 125 VA / 50Hz machine weight approx.: 0,3 t dimension machine xH: 0,8 x 0,7 x 1,6 (mit Tisch) m This is a tabletop device according to the optical measuring method. - incl. under table Application: - setting of tools of NC lathes other features: Hedou N Ap Eepfx Aflsfk - coordinate of the bridge adjustment=200mm - coordinate of the slide adjustment=350mm - enlargement of the projector 20x - accuracy of cutting adjustment on projector=0,005mm - smallest measuring length=0,002mm - lower edge of measuring holder up to table=150 - 170mm - reading the tool coordinates opt. -4 - table WxDxH: 545 x700 x 110mm - base frame with drawer: WxDxH: 586 x 700 x 730mm *

Year of construction: 2005, condition: used, Manual length adjustment via handwheel with digital display For attachment to any Elumatec single-head saw (right) Max. insertion length: 4,500 mm Hodsy N Dcbspfx Afljfk Pneumatic parking brake

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 185 h, load capacity: 250 kg, empty load weight: 2,782 kg, construction height: 1,998 mm, fuel type: diesel, total length: 5,324 mm, drive type: Diesel, arm reach: 8,500 mm, construction width: 780 mm, working height: 20,000 mm, Track-mounted aerial platform Hfjdpewx Txqjfx Aflek Technical condition: very good Battery condition: very good Description: The CTE TRACCESS 200 diesel is a compact track-mounted aerial platform for working at height in tight spaces, on sensitive surfaces, or in difficult terrain. With a working height of up to 20 m, a lateral reach of up to 8.5 m, and its track system, this machine is ideal for assembly, maintenance, and tree care work, even in hard-to-reach locations. Compact, all-terrain capable, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height. In addition to this machine, we offer aerial platforms and telescopic handlers for rent and sale. Our machines are continuously serviced and inspected. Rental, sales, service & repair. You can get everything from a single source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, Year of construction: 2002, operating hours: 49,100 h, functionality: fully functional, clamping force: 450 kN, overall weight: 3,300 kg, First owner Hfodpfxszal Tho Afljk

Condition: good (used), Year of construction: 1997, Compressor Kaeser DS 200 Year : 1997 Hfodpfxopgv Uze Aflek 110 kw Block visc changé à 44 000 heures Number of hours in charge : 2 500 hours

Condition: used, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Additional information Chassis: Steel welded construction, double-curved with a low-bed section in front of and behind the axle unit, the low-bed section is angled for easier access, turntable with robust ball bearing race, foldable rear support, chocks, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed section / rear axle: 6 pairs of lashing points on the side in the low-bed section, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of pocket recesses embedded in the outer frame, internally 70 x 40 mm, or instead of pocket recesses, 5-ton ring lashing points embedded in the floor Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Hfjdpji Ri N Uofx Aflsk Electrical system: 24 volts, multi-chamber lights, yellow side lighting, 2 white position lights at the front 2 white/red outline marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable connectors at the front Floor: curved section at the front with steel/diamond-plate covering, storage compartment embedded in the access ramp to the curved section, driving lane area and in the center between the beams with steel/diamond-plate covering, rear slope with 70 mm softwood floor, low-bed platform including rear slope 5900 mm Ramps: mounting rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg Storage compartment for ramps between the beams Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear

Condition: used, Year of construction: 2005, Mazak QTN 200 lathe, year of manufacture 2005 Mazatrol 640T 210 mm Kitagawa BB 208 chuck Hfsdpfoxgpqpjx Aflsk Spindle bore 65 mm Turning length 500 mm Turning diameter 380 mm Tailstock Tool probe

Condition: used, overall weight: 18,000 kg, first registration: 09/2019, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, - Twin tyres - Mega, - 3 m internal height - side loading Hsdexxxltjpfx Aflofk

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Hfodpfx Asw S Dmdjfljk Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: new, Year of construction: 2025, neu 2025 050141 prompt, Zwischenverkauf v Polen 2821.24 € 1 200 x 32 x 32 mm 1 kW 2800 1/min 42 mm 470 mm 250 mm 1050 mm 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Hodpfx Afsyrhqyjlefk Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 40900 € 781.19 € Hfedpfjynmyfjx Aflok 2050 mm 10 mm 10 mm 8 mm 8 mm 6 mm 200 - 220 mm 200 - 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: used, mileage: 1,94,229 km, power: 105 kW (142.76 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space volume: 10 m³, loading space length: 2,800 mm, loading space width: 1,860 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle No. for customer inquiries: 140 ----Refrigeration Unit: * Carrier Xarion200 * Standby and on-the-move cooling * Power connection * Freshness temperature 0°C * Refrigerant: R452A * 3 doors on the side * Kießling body * Load compartment dimensions: L: 2,800 mm W: 1,860 mm H: 1,980 mm * Payload: 825 kg ----Special Equipment: * Regulated air conditioning (Tempmatik) * 1 DIN slot in front below the dashboard, passenger side * MB audio system radio with USB and Bluetooth hands-free system * Battery disconnect switch, 1-pole * DAB tuner (digital radio reception) * Suspension: Level I stabilization * Rear door (opening angle 270 degrees) * All-weather floor mats * Vehicle without start/stop system * Generator 250 A Hsdpfex Uu Thox Afljfk * Additional main key * Terminal block for electrical connections (driver's seat box) * Fuel filter with water separator * Front engine power take-off with support for additional coolant compressor * Front mud flaps * Seats in the cab: Comfort driver's seat ----Standard Equipment: * Storage compartment above the windshield * Towing eye, rear * Adaptive brake light * Driver's airbag * Hill start assist * Anti-lock braking system (ABS) * Traction control system (ASR) * Drive type: Rear-wheel drive * Washer fluid level indicator * Exterior mirrors, electrically adjustable and heated, both sides * Outside temperature display * Brake assist * Headliner in the cab * Automatic headlight activation * Electronic brake force distribution (EBV) * Electronic stability program (ESP) * Driver assistance system: Crosswind assist * Power windows, electric, 2-way * Transmission: Automatic GTronic - (7-speed) * Body/superstructure: Standard flatbed * Keyless start * Communication module (LTE) for digital services * Fuel tank: Main tank 71 liters * Steering wheel (adjustable steering column) * Headlight range adjustment * Truck approval * Mercedes-Benz emergency call system * Engine: 2.1 L - 105 kW CDI CAT * Particle filter * Wheelbase: 3250 mm * Low emissions according to Euro 6 emission standard * Seat belt system with warning system (driver's side) * Seat cover / upholstery: Fabric * Seats in the cab: Passenger seat with armrest * Seats in the cab: Passenger seat adjustable * Seats in the cab: Driver's seat with armrest * Steel rims 6.5x16 * Daytime running lights * Fleece battery 92 Ah * Maintenance interval indicator Assyst * Immobilizer * Heat-insulating glass * Central locking with remote control * Permissible total weight 3.50 t ----Technical data: * Wheelbase: 3,325 mm * Load compartment dimensions: L: 2,800 mm W: 1,860 mm H: 1,980 mm * Payload: 825 kg * Tire size: 235/65 R16C ----€16,800.00 net plus VAT * If exporting to third countries or the EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase.

Year of construction: 2002, condition: used, z-travel 200 mm Clamping diameter of the cutter heads max. 550 mm Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting cone for cutter heads Nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and Hfsdpfx Afoy A S U Sslek easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1100x1300 mm Hfsdpfx Aovz Hicefljk Weight 200 kg Total power requirement 1 kw

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Hsdjvxr Thepfx Aflefk

Condition: excellent (used), Year of construction: 2013, operating hours: 8,000 h, functionality: fully functional, overall weight: 5,000 kg, load capacity: 200 kg, arm reach: 3,000 mm, controller model: IRC5, input voltage: 400 V, input current: 32 A, type of input current: AC, ABB IRB 6650S 200/3.00 robot on ABB IRBT 6004 8 meter linear track. The robot has only 8000 working hours and it is fully functional. Robot can be seen at our facilities. If any additional options needed for the robot, like camera, we can add it. 644-2 German 840-2 Profibus Fieldbus Adapter 608-1 World Zones 611-1 Path Recovery 617-1 FlexPendant Interface Hfjdpfxjyk Aizs Aflek 623-1 Multitasking RW Drive module 1 key ABB standard manipulator IRB 6600/6650 Axis 1 standard work range 6650S-200/3.0 No motor fan Drive System 09 4600/66x0/460/660/760 Additional drive ADU-790A in position X3 No drive in position Y3 RW Track Motion Type A Key Drive Module 1 IRBT 6004 Type A Standard carriage In line