Used Beche L 10 for sale (79,537)

Year of construction: 1991, condition: good (used), machine/vehicle number: nn, Broaching Machine – Vertical Manufacturer: Locher Model: RWIL 10 x 1250 Year of manufacturing: 1991 Force: 10 Tons Stroke: 1.250 mm Lrjdpfxofc T Ewe Akmju Area required: approx. 170 x 150 cm With automatic lead Magnetic chip-conveyor

Condition: used, Lifting strap, lifting strap, crane strap, lifting sling, round sling, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 10,000 kg Lodpodkx S Ijfx Akmjru -Length: 17.3 m -Number: only one piece available -Weight: 72 kg

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Lrodpfx Aotq Ufvskmeu Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: used, functionality: fully functional, machine/vehicle number: W41173J06081, Year of construction: 2018, operating hours: 3,108 h, load capacity: 1,600 kg, lifting height: 2,930 mm, free lift: 1,450 mm, fuel type: electric, construction height: 1,930 mm, empty load weight: 1,385 kg, drive type: Elektro, High lift truck Fahrgestellnummer: W41173J06081 Technical condition: good Front tires type: Polyurethane Battery Volt: 24V Battery Ah: 300Ah Battery year of construction: 2021 Lrjdpfxsuhw T Tj Akmju Description: Linde L16 AP No.: M0305 Year of construction: 2018 Operating hours: 3108 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other devices on site. Reach-through protection Makrolon load rollers Tandem charger external Access chip Initial lift

Condition: good (used), Year of construction: 2014, Glass grinder BOVONE ELB 10-45 BEVELING MACHINE - BOVONE ELB 10-45 - GLASS THICKNESS UP TO 60 mm - WASHER + Brush ----- TECHNICAL DATA Speed: 0,35-5,4 m/min Glass thickness: 2-30 mm OPTION 60 mm Bevel: 0-45° Bevels: 5 mm max Min. glass dimension: 12 mm thick edge 65 x 65 mm bevel 22.5° 85 x 85 mm bevel 45° 105 x 105 mm Gr. 30 mm edge 80 x 80 mm bevel 22.5° 100 x 100 mm bevel 45° 140 x 140 mm Installed power: 31.5 kW Weight: 4950 kg Height of working panel: 920 mm Dimensions: length: 8200 mm width: 1200 mm H: 2900 mm Voltage: 24 V Lrsdpfx Ajulac Hjkmsu

Condition: used, Gears, spur gears, bevel gears, worm gears -Manufacturer: Nord, gearbox type SK 42125AD-100 L/4 Lrsdpfxeh Ig Syj Akmeu -Translation: i = 87.30 -Drive shaft: hollow shaft Ø 60 x 235 mm -M2 max: 1892Nm -Dimensions: 380/250/H470 mm -Weight: 101 kg

Condition: ready for operation (used), Siemens 1FN1910-0AA20-3AA0 SIMOTICS L SME93 encoder connection box, serial number: 2510/30008240, used, minor signs of wear, 100% functional, scope of supply as shown in the photos. Lrodpfx Ajltr A Uokmsu

Year of construction: 1991, condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h Ledpfx Aksi E Hz Tjmeru working pressure : 10 bar increased test pressure : 18,5 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1991 equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings.

Condition: used, Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long -Number: 61x box available -Price: per box Lrsdpfsiqu R Sjx Akmju -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box

Condition: used, Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 4 bars -Diameter: 19mm -Length: 47mm -Number: 43 pieces available -Total Cost -Total weight: 2.15 kg Lrsdpfeh Uhk Tex Akmeu

Year of construction: 2004, condition: good (used), Manufacturer: KUKA Ledpfx Aoh Dw Erskmeru Type: KR 210 L 180 Year of manufacture: 2004 Net weight: 1245 kg

Condition: used, Converter, power supply, power supply, switching power supply Lredpfjgd D I Hsx Akmeu -Manufacturer: Siemens, SITOP Power 10 power supply -Type: 6EP1434-1SL01 -Input: 230/400 V 3 AC 50/60 Hz -Output: 24 V DC 10 A -Number: 6 pieces available -Price: per piece -Dimensions: 130/240/H125 mm -Weight: 3.3 kg/piece

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Lsdpfx Akjr Igtyemeru Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: good (used), flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: SK 4282A-G-100 L/40 i = 43.65 -Speed: 33 rpm Lsdjt E D N Dspfx Akmsru -Engine: Type SK 100 L/40 -Power: 3 kW / 1410 rpm -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 530/260/H465 mm -Weight: 85 kg

Condition: good (used), flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: Nord, flat gear motor -Type: SK 3282A-100 L/4 i= 42.02 -Speed: 34 rpm Lrodpot E D Sfjfx Akmeu -Engine: Type SK 100 L/4 -Power: 2.2 kW / 1440 rpm -Hollow shaft: Ø 40 x 175 mm -Protection class: IP55 -Dimensions: 470/290/H380 mm -Weight: 62 kg

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 Lrjdpfx Aksytr Hbemsu with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Ledpofg Ewzofx Akmjru Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: new, bending length: 1050sheet thickness: 5.5upper roll diameter: 130 Technical specifications: - Back roll with motor - Cone bending device Ledjd Ab Nyspfx Akmsru - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 799,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor

Condition: ready for operation (used), Year of construction: 2022, An oil-lubricated screw compressor AiRKO is offered. Motor power: 7.5kW, Motor speed: 3000rpm, Volume flow: 1.02m³/min, Max. operating pressure: 10bar. Viewing possible by prior arrangement. Lrodpfx Akjzlkapjmeu

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Lredpfxoyhbxcs Akmju Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Available quantity: 47 units Functionality tested; item comes from the dismantling of equipment from an automotive supplier. Manufacturer: Euchner GmbH + Co. KG Model: MGB-H-AA1A2-L-106221 Type: Handle module for MGB systems Installation type: Left Function: Mechanical handle module with locking mechanism Lsdpfx Aszmm I Eokmjru Material: Aluminum / Plastic Compatible with: MGB evaluation modules Application: Safety locking mechanisms on machines

Condition: used, ABB robot IRB 1600-10/1.2 Foundry Plus IRC 5 industrial robot. Lrsdpfxezwda Hj Akmju

Condition: used, mileage: 4,44,361 km, power: 74 kW (100.61 HP), first registration: 08/1965, fuel type: diesel, empty load weight: 4,500 kg, maximum load weight: 2,900 kg, overall weight: 7,400 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: other, driver cabin: other, gearing type: mechanical, emission class: none, number of seats: 3, loading space length: 4,600 mm, loading space width: 2,250 mm, loading space height: 1,900 mm, Equipment: cabin, tail-lift, trailer coupling, * German vehicle * First owner * Service booklet available * Original invoice for new price available * Condition: see photos Lrodpszt R H Eofx Akmsu * Very rare short-cab model * Flatbed with tarpaulin * Atlas tail lift * Body dimensions: 4.60 m x 2.25 m x 1.90 m * Tow hitch * Trailer load: 7,400 kg * Cab with 3 seats * 5-speed gearbox * Mercedes Benz G32 * Fully synchronized * Engine: OM 352 * 6-cylinder, 5,675 cc * 74 kW / 100 hp * Leaf spring suspension * Wheelbase: 4,200 mm * Gross vehicle weight: 7,400 kg * Can be driven with driver's license class 3 * Unladen weight: 4,500 kg * Payload: 2,900 kg If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false impressions about the condition and suitability. Inspection and examinations are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 3,000 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 142 mm, controller manufacturer: SIEMENS, controller model: WS 400-20, CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis stroke: 3,000–3,500 mm (version dependent) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Tenoning/slotting spindle quantity: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle motor power 1: 11 kW • Tenoning spindle motor power 2: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Profiling spindle quantity (vertical): 2–3 pcs Lredpfx Aszug Nrokmou • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (flight circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Horizontal profiling unit (top) motor power: 3 kW • Horizontal profiling unit spindle diameter: 40 mm • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Lrjdozuyxgepfx Akmju Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili