Used Board Books Production Machines for sale (73,589)

Year of construction: 2022, condition: new, This system operates in automatic mode. The transfer of pallets between production line and curing area is carried out by Finger Car. 1 operator supervises the production process via control panel equipped with 4 different monitor, pc system. Automation system software has user-friendly interface and can be translated into customer’s preferred language. Production line requires the construction of curing chambers with racks. Steam curing is recommended for working in one shift and is mandatory for working in two shifts. Njdjibcycspfx Akfjcr Transfer of production pallets with green products to the curing chambers as well as the transfer of pallets with cured products to the cubing station is carried out by automatic pallet transport system known as Finger Car. Finger car consists of lower and upper electric trolleys, which move along a set of rails built perpendicularly to the concrete block production line. The upper trolley has steel forks for grabbing and holding pallets. It transfers concrete products to the curing chambers, going inside each chamber to place pallets with wet products on racks to cure. On its way back it takes a stack of pallets with cured products and loads it into the lowerator. The price given as 1.200.000 USD includes all the machine equipments, concrete batching plant and 3000 pallet rack system. It is very special offer for August 2022!

Condition: new, Year of construction: 2024, machine/vehicle number: 5182024016, Our ZIM 518 machine is an entry-level and investor-friendly machine designed for the production of double-layer paving stones. ZIM 518 comes out with low energy consumption, low investment cost and high return on investment. Our machine, which can produce 5 concrete blocks or 18 concrete paverstones in one press, is designed to produce 1000 pallets per day. However, if requested, it can also produce concrete curbstones of 1 meter length! To facilitate this production and increase quality; It has many features such as driver-controlled vibration system, special balancing system on the upper mold, and a specially designed vibration table. Our machine is designed as manual system and it is managed by the operator with a hydraulic unit and a joystick. Although it is a budget-friendly machine and can be installed within hours, our ZIM 518 machine enables the production of high quality paving stones. Our machine gives you a good position in the competition! We are using “ FULLDRIVE ” frequency controlled vibration systems in our machine. This helps the life cycle of vibration engines and also decreases the total electrical consumption of vibrators. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service. Ncodjicap Tjpfx Akfsr

Condition: new, Year of construction: 2025, machine/vehicle number: 12302022104, ZIM 18 ULTIMATE is a high-capacity, fully automatic concrete block machine designed for industrial-scale, non-stop production. With CNC-machined body components for maximum precision, advanced automation options, and low labor requirements, it stands as one of the most durable and efficient solutions on the market. Compatible with Finger Car, U-Type, and L-Type systems, it integrates seamlessly into any high-output facility. Njdpfofnz T Rox Akfecr Precision Engineering and High Efficiency Capable of producing 18 hollow blocks per cycle and 1400–1600 pallets per 8-hour shift, ZIM 18 delivers consistent high-volume output. Its entire machine body is processed on CNC machining centers, ensuring perfect alignment, zero tolerance errors, and unmatched stability even under heavy workloads. Advanced Mortar Feeding and Compaction Systems The machine features a loadcell-based mortar monitoring system, enabling precise control over mortar flow. Its proportional mortar carriage includes a highly advanced agitator system, ensuring that the mold is filled evenly and quickly. Combined with a 4-point mold balancing system and an electronic mold stopper system, the machine guarantees uniform block density and superior surface quality on every press. Fast and Automated Mold Change The pneumatic mold connection system allows mold changes in less than 15 minutes. The machine body is separated from the press unit via rails, and automatic body height calibration eliminates any manual adjustments, minimizing downtime and operator intervention. VIBROSTAR Oil-Bath Vibration Technology ZIM 18 uses the VIBROSTAR oil-bath vibration system, designed for maximum cooling and continuous operation. With 6 shaft-connected vibration motors producing a total of 33 kW, the system ensures high-frequency, uniform compaction for exceptional block durability. This vibration unit, engineered with ZİM’s decades of expertise, is built to operate for years without malfunction, delivering unmatched performance and cost efficiency.

Year of construction: 2022, condition: new, machine/vehicle number: 82002022104, ZIM 1025 PLUS Block and Paverstone Machine is special design machine for block and interlock production that works fully automatic.The movement of the machine is programmed the PLC microprocessor computer. By changing moulds all kinds of blocks, paverstones, curbstones, grass stones, lentos and precast concrete elements can be produced in a serial way. 20cm block can be produced 10, interlock paverstones can be produced 25 units in one press. Machine is able to produce the insulated block upon demand. Thanks to special features developed by our engineers machine have very short cycle time. For example mould changing is wery easy and take short tme in new system. Ncsdpfx Ajifz Ahjkfor Automation system and operator panel which is developed and redesigned in long years become user friendly and useful. With our special design vibration table you can produce high quality products with less energy. We use pneumatic bellows in machine mould connections, due to this system vibration on mould is expanded regular and uniform. Service and maintenance is easy thank to our strong machine chassis and ergonomic design

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY CAPACITY 11 TONS PER HOUR FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7 Nodpfev Tl D Njx Akfjcr

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MB440, Machine data: Manufacturer: Rjukan Metall Model: Masterbend MB440 Year of manufacture: 2001 This machine can process all common spacer profiles (aluminum, stainless steel, Chromatech ultra / TGI) using a single tool (without conversion). The machine bends three corners and assembles one corner with a connector. The unit is fully functional (a video can be provided upon request) and is available immediately. Collection only in 92224 Amberg, no shipping. Inspection possible by prior appointment. Nsdsxdwphspfx Akfscr

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15-20 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. This machine is a flexible and efficient automatic board feeder developed for pallet production machines, but also well suited for other applications within the wood industry. The machine is specifically designed to integrate with both deck nailing machines and leg nailing machines, regardless of brand or capacity. We have supplied automatic board feeding systems to nailing machines from, among others, Cape, Corali, Storti, IMH, IM Hart, Viking and Mychrome. Thanks to the reliable vacuum system and the simple maintenance-free one-piece feeder – based on our own patented solution developed more than 40 years ago – only minimal adjustments are required when changing dimensions. This results in short changeover times and high operational reliability. The machine equipment also includes a tilting package lift that tilts the package approximately 10 degrees. This ensures that the boards remain stable and do not fall apart when the straps are removed, even if the boards are not perfectly aligned in the package. As optional equipment, the system can be complemented with: - Automatic turner - Vision/Camera system - Automatic removal of sticks between board layers The end result with this type of feeders is a reliable and flexible high-quality solution that enables more productive and cost-efficient pallet manufacturing. Ncjdpfoyk Tlgsx Akfsr Material dimension of a standard machine: Board length: 600-1600mm, board width: 60-150mm, board thickness: 16-32mm Package length: 800-1600mm (packages with boards shorter than 800 should be on a EUR-pallet), package width 800-1200mm, package height: 0-1400mm Feeding capacity: 50 boards/min (with board width 100mm) Machine dimensions (LxWxH): 4300x3700x2800mm The machines is CE-marked. Do not hesitate to contact us for more information, pictures and videos.

Condition: used, Year of construction: 1987, functionality: fully functional, Complete production line for Chain Manufacturer - VITARI Line Consists : 1.Wire drawing machine SKP8 T.I. 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P 1.3. Year of production 1995-1999 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Model MS6 3.3. Year of production 1986-1989 3.4. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Model MS6 4.3. Year of production 1986-1989 4.4. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 Ncedpsyf Drmjfx Akfer 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. 6.3. Year of production 2005-2007 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation

Condition: good (used), Year of construction: 2019, total length: 3,250 mm, total width: 1,000 mm, total height: 2,400 mm, 4 compartment trolleys - sorting system 25 compartments max. glass size 3000x2000 mm Nodpswld Eujfx Akfscr

Condition: ready for operation (used), CAP30 APPLICATOR 1000 HELICAP23: YOM 2016 VERSION 300v 15.600 RUNNING HOURS PRICE 150.000 EUR FCA POLAND THE MACHINE WAS IN PRODUCTION TILL SEPTEMBER 20. EXCELLENT CONDITION Ncodpfxew Nqn No Akfer EXCELLENT CONDITION, READY FOR SHIPPING

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Complete production line for Chain Manufacturer - VITARI Year - 1980 Line Consists : 1.Wire drawing machine SKP8 T.I. 95647 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P Serial Nr 9564/7 1.3. Year of production 1995 -1999(depends on condition) 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Year of production 1978-1981 3.3. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Year of production 1978-1981 4.3. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. 6.3. Year of production 2005-2007 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included Ncsdpeyfg Tgefx Akfer For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation

Condition: used, We offer a board stacking machine. The stacker features a separating device and a powered roller table for pre-made packaging. Njdpsyh U I Isfx Akfecr More than half the width is in like-new condition, as only 120 cm wide boards have been stacked. Machine width: 4.30 m Machine length: 7.50 m The entire system corresponds to the foto

Condition: good (used), Year of construction: 1993, functionality: fully functional, Fully operational Coralli pallet production line with integrated wooden block cutting saws. This setup allows seamless production of EPAL pallets with wooden blocks. The line’s capacity is approximately 2000 pallets per shift. We have and pallet block feeder price 25000eur Ncodpfxovx Hnto Akfjr

Condition: good (used), Karl Tranklein Joint forming machine Machine in very good condition, ready for production. Technical data: Max. thickness: 9 cm Ncjdpfx Asvac T Ujkfsr Max. width: 50 cm Power supply: 230 V, 50 Hz Weight: 90 kg

Condition: good (used), Sumbel Enano 150 gluing machine The machine is fully operational ready for production. Like a new one. It is the most valued brand among small gluing machines. An ideal solution for the production of covers, decorative packaging, etc. Production Germany. The machine works on cold glue Copper cylinders. Smooth adjustment: glue thickness, gap thickness. Ncjdsu Umapspfx Akfjr A set of separators, Simple cleaning without the need for tools. Working width 150mm 230V power supply Weight 30kg

Condition: good (used), Corner cutter Zhengrun FD-QJ80 Very good condition. This is a professional, production device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Replaceable knives. Adjustable margins. Nsdpfxsvac Thj Akfscr Stack height 80mm Weight 270kg Efficiency 85 cycles/min Power supply 400V The waste is directed outside the machine. This is the currently produced model.

Condition: good (used), Zechini Angolar M automatic corner cutter Production Italy. Perfect condition. This is a professional, production device for rounding corners and for cutting corners for hardcover. A solid cast iron construction, strong pressure ensure precise operation. Replaceable knives (7mm radius knife included) Adjustable margins. Stack height 50mm Weight 110kg Efficiency 40 cycles/min Nedpfx Asvac Tnjkfjcr Power supply 400V This is the currently produced model.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Nedpfx Aewud Tkjkfocr Power supply 380 V + compressed air.

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine The device is in perfect condition, ready to work. Technical data: 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. The device punches holes and crimps the eyelet in one pass. Nsdpfxeu Umave Akfjcr Automatic eyelet feeding.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm Ncodeu Umbaspfx Akfjr – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Condition: used, Year of construction: 2018, functionality: fully functional, EA 629 | MAKRO MAK 5 ADHESIVE LABELLER Year: 2018 Speed: 24,000 bph Ncjdpfx Aeyk Entskfsr Direction: Counterclockwise 24 heads No. 6 adhesive stations Electronic cams Safety protections

Condition: used, Year of construction: 2013, Labeller CAVAGNINO&GATTI • Year: 2013 • Speed: 8,000 bph • Direction: Clockwise • 4 cold glue stations (COLLAR, LABEL, BACK LABEL, and GLUE 'I' MARK) • 3 self-adhesive stations (LABEL, BACK LABEL, NECK LABEL) Nodpoyk Ekzefx Akfscr • Electronic cams • Optical centering • 20 heads • Safety protections Bottling Scout Powered by Elitekno Bottling Solutions

Condition: used, Year of construction: 2009, functionality: fully functional, Model: Opera 300 Year: 2009 Speed: 36,000 BPH Rotation: Clockwise American bottles infeed 24 electronic cam plates 3 adhesive stations - 2 Sacmi mobile units - 1 PE mobile module Applicable label types: - Front - Back - Wrap-around - Vignette - Collar / wrap-around collar Optical centering Speed with centering: 22,000 BPH with 0.1L bottles System type: electronic with cameras (vision and computer group) Safety protections Code: EA 669 Nodpfx Akoyk Eiwefecr Bottling Scout powered by Elitekno Bottling Solutions

Condition: used, Year of construction: 2021, functionality: fully functional, Model: Mak-4 20P UA5 L5 CO2 Year: 2021 Speed: 12,000 BPH with glue unit and optical centering 20,000 BPH with adhesive-only, without optical centering Direction: counterclockwise Automatic head adjustment via recipe 20 electronic cam plates Universal clamps Number of stations: 5 adhesive and 1 cold glue (new) (removable) Number of applicable labels: 5 Applicable label types: - Front Nedpfeyk Ehyox Akfscr - Back - Wraparound - Wraparound collar/neck - State Seal I - State Seal L - State Seal U Electronic optical centering with cameras: System (2 cameras with follower system) System (3 cameras) Safety protections Code: EA 658 Bottling Scout powered by Elitekno Bottling Solutions

Condition: ready for operation (used), Year of construction: 1993, 5 clamps side glue premelter dust extractor bag Njdpfsyagutox Akfjcr cover feeder