Used Buchdeckenmaschine / Case Maker for sale (2,141)

Condition: used, Year of construction: 1994, operating hours: 8,143 h, Equipment: all wheel drive, * Sunroof * Driver’s suspension seat * Shunting hook * Auxiliary heater * Crawl speed ---Superstructure: ROPS driver’s cabin, heated, Engine: Water-cooled 4-cylinder Deutz diesel engine, type 1012, 65 kW, all-wheel drive, travel speed 20 km/h, 8-ply tires, track width approx. 2,530 mm, dozer blade 2500/600 mm, hydraulic axle supports, mechanical quick-change system, adjustable boom, hammer + grapple piping (7 hydraulic connections), excavator bucket 1000 mm / 634 liters Nwodpfx Asy Scr Hob Ujl For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Nwodpfx Aez Eht Djb Ujl Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Condition: used, Case hardening line CIEFFE Max. Charge dimensions (W x L x H): 580 x1000 x 550 mm Max. Charge weight: 450 kg gross consisting of: 2 Gas heated multipurpose chamber furnaces - Type: LLF-5-G / LLF-5-G A/R - Working temperature: 750° - 980°C - Quenching media: Nitrogen – Oil - Atmosphere: Methanol, Methane, Nitrogen 6 ÷ 8 m3 / h 2 Gas heated tempering furnaces - Type: FVF 5 - Working temperature: 80° - 750°C - Atmosphere: Air, Nitrogen + Methane 1 Washing machine Reys - Type: Master - Washing tank: 2000 lt - Rinsing tank: 950 lt - Washing pump: 7,5 kW – 700 lt/min - Rinsing pump: 4 kW – 700 lt/min 1 Uniloader Charging places Charging material (baskets and grids) Spare parts Njdpfx Aexnkqgob Uswl

Condition: excellent (used), mileage: 7,580 km, power: 90 kW (122.37 HP), first registration: 06/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: diesel, fuel tank capacity: 75 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,250 mm, total width: 2,090 mm, permissible axle load (axle 1): 2,100 kg, permissible axle load (axle 2): 2,250 kg, Year of construction: 2023, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, navigation system, onboard computer, power assisted steering, power mirror, soot filter, tire pressure monitoring, traction control, = Additional Options and Accessories = - Alarm system - Armrest - Exterior mirrors with turn signal - AUX input Nwodozvf Szjpfx Ab Ujl - Exterior temperature display - Becker mount - Heated mirrors - DAB radio - Tachometer - Driver's seat height adjustment - Remote central locking - Enclosed cabin - Tinted glass - Height-adjustable steering wheel - Height adjustment for front seats - Folding exterior mirrors - Comfort seats - Particulate filter - Radio/CD player - Disc brakes - Headlight height adjustment - Side doors - Voice control - Touchscreen - Immobilizer - Partition with window = Additional Information = General Information Number of doors: 2 Technical Information Number of cylinders: 4 Engine displacement: 1,968 cc Maximum front axle load: 2,100 kg Maximum rear axle load: 2,250 kg Weights Unladen weight: 3,145 kg Payload: 355 kg GVWR: 3,500 kg Functional Cooling: 20 °C to 25 °C Body manufacturer: Cold Car Vriezer / Freezer Cooling motor: electric Wall thickness: 1 mm Maintenance APK (Technical Inspection): valid until 06.2027 History Service records: Available (dealer maintenance) Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: On request VAT/Differential taxation: VAT deductible = Company Information = Nidro cars Holland is located in the centre of the country and is the right place to purchase your car, van or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All trade-ins are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 42,140 h, machine/vehicle number: 082170115104, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-4000-CUT, laser hours: 42,140 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 120 mm, pipe length (max.): 4,500 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, type of cooling: water, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, type plate available, For sale: Fiber laser for cutting sheet metal, profiles, and tubes – BLM LC5 combo 4000 W. The laser is fully operational and has been serviced until the end by BG POLSKA – BLM Group. Nedpfxex Ubkao Ab Uowl We have two Precitec cutting heads for the laser. One is brand new and installed on the machine; the other is refurbished and kept as a spare. This allows for uninterrupted production in case of a malfunction, as you can simply swap the head. We also have a large stock of consumable parts: nozzles, ceramics, protective lenses, a securely sealed lens replacement kit, supports for tubes and profiles, etc. The laser is being sold due to the construction of a new production hall, which prompted a reorganization of the production line. The machine features automatic nozzle exchanger, automatic centering, and automated tube and profile loading. CNC programming software – Lantek Expert (3 licenses) Year of production: November 2017 I encourage you to see it in operation on-site.

Condition: excellent (used), The Tramper D-360 trays dispenser is a reliable and compact machine designed to automate the packaging process in the food industry. The device feeds trays to the packaging line quickly and precisely, increasing efficiency and reducing manual labor. It is ideal for plants producing ready meals, meat, fish, cheese, and other products that require tray packaging. Nwodowmn Amspfx Ab Uol Technical data: Producent: Tramper Technology Model: D-360 Project number: T99278 Year of manufacture: 2013 Main power supply: 400 VAC Control: 24 VDC Air supply: 6 bar Tray dimensions: 227 x 178 mm Weight: 160 kg Construction: stainless steel – suitable for hygienic environments ✅ Key advantages: Automatic tray feeding – smooth integration with tray sealers and packaging machines Compact design – saves space on the production line Simple and intuitive operation – easy adjustment to different tray formats Compliance with sanitary standards – ideal for the food industry High reliability – proven Tramper brand quality Easy installation and maintenance – design engineered for everyday use The Tramper D-360 perfectly supports the automation of the packaging process, reducing downtime and increasing line efficiency. It is the ideal solution for manufacturers looking for a proven and efficient tray feeding system.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Nodpfx Abez Agv Uo Uewl - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: like new (used), Year of construction: 2021, Machine bought new in 2022 and hardly used. It literally still looks brand new. Rare opportunity. Nwodpfov Hfg Rjx Ab Uel

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors Nwodpfxszuw R Hj Ab Uol - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Year of construction: 2008, condition: used, Fully automatic carton sealing machine for gluing on top with self-adhesive tape • Running direction from right to left • Carton size range width 100- 500 mm, height 100 - 500 mm, length 150 - 760 mm Nedpfx Ajimbdbjb Uowl • Output 20 cartons/min • Flap folding device • Drive 400V/50Hz • 2 conveyers with length 4.30 m/2.50 included can dryer system • CARTON BOX SEALING MACHINE COMARME B52

Condition: ready for operation (used), An open copper cheese vat with low material removal and planetary agitator including knife harps and paddles is available. Shape: round, edge material: steel, inner diameter: 2600mm, useful volume: 7000l, outer diameter: 2850mm, height: 2950mm. Cheese mold: 2x4, mold length: 820mm, beam length: 4400mm, whey tub length: 4400mm, total length: 5000mm, width: 1500mm, depth: 900mm. An on-site inspection is possible. The copper was only gently washed. Nodpfx Aex Db Uujb Uewl

Condition: used, Plattenbelichtungssystem / CTP Plate Maker Heidelberg TopSetter 102 Serial-No. 2310 Year 2001 Nsdszgfvhspfx Ab Uewl Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: Nodpfx Abez Agw Eo Uswl - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Njdpfx Aboz Ag Rrs Uewl Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  Njdjyxxxvepfx Ab Uewl - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: used, Year of construction: 2010, machine/vehicle number: 1008801, The machine is designed for electro-resistance spot welding of gabion mesh panels. It can also be used for welding a new type of mesh; in this case, the welding points are reprogrammed. Wire diameter: 3-6mm Maximum mesh dimensions: approx. 2x2 m Operation of the welding machine is semi-automated. Wires are manually inserted on one side of the machine. After automatic welding, the finished mesh is manually removed, and new wires are inserted. Power supply: 400 V AC Machine dimensions: approx. 10.5 x 3 m Location: In our workshop Nwedpfozy Eq Sex Ab Uel

Condition: ready for operation (used), Equipment: open design, standing on 3 feet, insulated, jacket can be heated and cooled, copper inner coating, stirring/cutting unit, various connections in the jacket for hot water/ice water, outlet connection nominal diameter DN 65 reduced to nominal diameter DN 25, capacity: 1200l, outer diameter: 1770mm, inner diameter: 1600mm, height with agitator: 1550mm, tank height: 1000mm. An on-site inspection is possible. Nwodpfx Abjy Uyfij Uol

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! Nwedpeu Nu Tpofx Ab Uel i.D. *

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Nwsdpfx Abszz Rpcs Usl - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 1997, Used Case Erector EURO TEMA FC-2000HM The capacity of 2000 cartons per hour Nodpfx Abovgux Ao Ujwl State of the machine: functioning and regularly maintained.

Condition: excellent (used), Soco Automatic Case Sealer / Box Taper Model T55 Nwjdpfx Aehvr Afeb Uel For random size boxes Top and bottom tape heads Adjustable height legs Complete with infeed and out feed gravity roller conveyors In excellent condition Delivery / Shipping can be arranged if you require this service

Condition: used, functionality: unexamined, Year of construction: 2019, The Dematic line is disassembled and ready for transport. Njdpozxrtksfx Ab Uswl Manufacturing date: 2019/2020. Technical throughput: – Conveyor capacity from the mezzanine to the induction stations – 1,800 cartons per hour – Conveyor capacity from the TTU sorter to VAS and the outbound sorter – 1,560 cartons per hour Loading units: a) Cartons on internal conveyors: – Average weight: 15 kg/carton – Dimensions: 600 x 400 x 400 mm – Weight: from 1 to 30 kg/carton b) Cartons on outbound conveyors: – Dimensions: 800 x 400 x 340 mm – No lid – Lid is applied at the end before shipment – Weight: from 1 to 25 kg/carton – Average weight: 15 kg/carton The line is equipped with two TTU sorters. The TTU sorter is a compact sorter that works perfectly in narrow spaces. The TTU is capable of sorting both plastic bags and cartons. Each sorter consists of 2 infeed areas and 300 discharge locations. The two combined sorters have 4 infeed lines and 600 discharge locations. Cartons on the conveyor are identified and transported to the appropriate zone on the sorter. Sorter equipment: – 32 workstations with 16 screens – 16 screen supports – 20 RF scanners (10 per sorter) – 4 pallet discharge locations – SCS server – 2 Lantech case erectors and Robatech glue applicators – 2 Altek 700 kg scissor lifts, located on the outside of each sorter. Access to the platform is secured by a Troax system – when the lift is activated, access to the loading area is prevented by an electromagnetic lock. Additionally, the platform is enclosed with welded wire mesh. – 2 Fischer platforms – workstation for 12 employees (6 on each side), equipped with Data Logic barcode scanners and a Beckhoff CP3716-1071-0010 monitor.

Condition: used, mileage: 33,153 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, In good condition and fully functional, with no pending repairs. Nodpjzmqncsfx Ab Uswl +++ Vehicle is ready to drive ++ Power steering ++ 7.5 tons possible with an H-certificate +++ Recent inspection including brake fluid change, lubrication, and fuel filter replacement. In addition, the air dryer cartridge and windshield wipers will be replaced. Both starter batteries have been renewed, and the fluid levels of all components have been checked and topped up if necessary. The windshield washer system will be upgraded to an electric pump with a push-button. The exhaust system will be overhauled, with the last pipe being replaced. This 1113 runs very well and is ready to drive without any issues. 9 seats (6 seats possible with private registration as a truck), All-wheel drive 4x4, central and rear differential locks, trailer hitch with ring eye 1.5t Transfer case with off-road reduction and differential locks, Walk-in equipment box with equipment holders, Wheelbase 4200 mm +++ Maximum speed according to documents = 85 km/h, actual speed with GPS 88 km/h Interior cabin dimensions from behind the driver's seat LxWxH in mm: 1560 x 2180 x 1460 Exterior box dimensions LxWxH in mm: 3130 x 2400 x 1500 Interior box dimensions LxWxH in mm: 3050 x 2400 x 1450 GVWR is 9.0t - Changes, prior sales, and errors excepted - ?080?

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Nwedpfjzp H R Eox Ab Uel Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 1988, Manufacturer : OLI Model: 210 Nwedpfex R Dhgsx Ab Uol Year : 1988 Type : Semi-automatic side loading case packer Application : To insert grouped cartons of regular shapes into shipping cartons Carton infeed and grouping : automatic Empty box loading: manual Infeed conveyor Outfeed roller conveyor Factory voltage: 220 / 380 V Control voltage: 24 V Max. pressure: 6 bar   Current format: see illustration, adaptation can be quoted separately.