Used Ventilator for sale (1,576)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Low operating hours, as it was used exclusively for testing purposes. Very good condition. Fpjdpfx Apszzaz Ij Djn Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015.

Condition: good (used), Year of construction: 2005, Manufacturer: Trane Type: CLCE 1810 Year: 2005 Fpsdpfx Apsk Abw Ts Den Overall dimensions: 3330 x 1900 x 2000 mm Suction side dimensions: 900 x 900 mm Fan: Manufacturer: Nicotra Type: VRE RDH 710 K1 Maximal drive power: 37 kW Maximal rev: 1700 1/min Electromotor: Manufacturer: Tee Electric motors Type: QU 200 L4C-40 H Electric power: 30 kW

Year of construction: 2015, condition: used, functionality: fully functional, We have a used UFO-4-M/N-2 filter ventilation unit by Klimawent for sale – a stationary dust collector designed for air purification from dust and fumes. Device parameters: a. UFO-4-M/N-2 filter ventilation unit b. 3 hoods, 3000x1500 mm Fsdpfx Ajzl Al Dsp Dspn c. Ductwork installation d. Installation capacity: 10800 m3/h Very good condition, fully functional, lightly used. Local pickup only.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: E11MI18072681445, This is a CM(P) 101 combination oven from the premium manufacturer Rational, in an electric version with a 6-month warranty. This combination oven is equipped with a racking system with 8 tray holders. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. The base unit shown in the picture is not included in the offer but can be purchased as an option. Sample photos of the actual unit will be available shortly. The unit will be available in approximately the 43rd calendar week. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational equipment type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This unit is the ideal choice if you are looking for a classic combination oven that you want to operate manually. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice – before and after the purchase Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, air flow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum dimensions of the door opening for transport W x H: 845x1050mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Capacity: 8 x 1/1 GN Weight: approx. 132 kg Serial number: E11MI18072681445 Year of manufacture: 2018 Condition: used, inspected, fully functional Further details: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Brings prepared and chilled dishes to the optimal serving temperature in the ideal climate. Automatic separation of fat for clean cooking chamber air Manual cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food. Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement by means of a sensor Cool-down function High-performance fresh steam generator (automatic rinsing and emptying) Handheld shower with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Fpjdpez Rl I Rsfx Ap Don Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have any questions, would you like a consultation or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fpjdpfexnlwzox Ap Dsn Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: excellent (used), Huber & Ranner Air Handling Unit (AHU) For sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was used as a recirculating air unit for a paint booth and is in excellent, clean, and professionally maintained overall condition. The system controls the complete air climate (filtration, cooling, humidification, and air supply) and is ideally suited for production halls, paint shops, wood or metal processing, and large-scale industrial projects. Technical data of the complete system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System Reference: SPK ULA) Order Number: 19 0090 Z / P.010 Volume Flow / Air Capacity: 31,000 m³/h The modular components in detail: High-performance fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Fpedpfx Aezrmctep Dsn Max. frequency: 49.7 (54.4) Hz Integrated cooling coil (cooler): Cooling capacity: 50 kW Material: CU / AL (copper/aluminum) Refrigerant: R134a Highly efficient filter stage: Filter class: F9 / Standard (fine dust filter for the highest air purity) Filter type: TM 9U635A10-1 (Quantity: 9 pieces) Recommended final pressure: 250 Pa Humidifier & droplet separator module: For precise regulation of humidity, including an integrated droplet separator to prevent moisture transfer into the air duct. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2006, Zum Verkauf steht ein größerer Posten pneumatischer Prozessventile mit Antrieb. Gesamtmenge: 96 Stück – ca. 65 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – restliche Einheiten: pneumatische Antriebe / Ersatzteile Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Chemische Industrie – Lebensmittel- und Getränkeindustrie – Wasser- und Prozesstechnik – Wartung, Ersatzteilversorgung, Wiederverkauf Neupreis vergleichbarer Einheiten: ca. 120–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 4.200 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: large lot of pneumatic process valves with actuators Total quantity: 96 units – approx. 65 complete units with stainless steel ball valves – remaining units: actuators / spare parts The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – chemical industry – food & beverage processing – water treatment – maintenance and spare parts supply – resellers Estimated new price of comparable units: approx. 120–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Fodpfxsy Nfzxs Ap Dspn Price: 4,200 € negotiable Location: Slovakia (EU) Worldwide shipping available

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 2 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 20,000 m³/h, filter area: 295 m², noise level: 75 dB, actuation type: electric, total height: 3,643 mm, total length: 2,066 mm, total width: 1,756 mm, overall weight: 1,590 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, NOVUS Airtower FT 20,000 EC – like new – Fsdpfjzfx Riex Ap Dopn only 2 operating hours For sale is a NOVUS Airtower FT 20,000 for extracting welding fumes in industrial halls. The unit was used exclusively for testing purposes and currently has only 2 operating hours. The Airtower has been technically inspected and is in perfect working order. All features are functioning correctly. There are no damages. Equipment: * NOVUS Airtower FT 20,000 * ECblue efficiency package * NOVUS particle sensor * NOVUS lighting package * Timer * Automatic filter cleaning * 3 filter stages * Total filter area 295 m² * Dust container 200 liters * Plug & Play, no piping required * Forklift attachments and crane eyes Technical data: * Airflow rate: approx. 20,000 m³/h * Motor power: 15 kW / 400 V / 50 Hz * Dimensions: approx. 2,066 x 1,756 x 3,643 mm * Weight: approx. 1,590 kg * Sound pressure level: < 75 dB(A) A guard was removed during the testing phase and has already been reordered. This will be professionally installed before delivery. Price: €27,900 net, negotiable, plus VAT. Sale exclusively to businesses. Location: 48691 Vreden. Inspection possible by appointment. Loading can be arranged on-site.

Condition: used, Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Fpsdpfx Aez Hwypjp Dsn Baujahr / Year 2007 - Serial-No. 7402 Einsatzmöglichkeiten: Punktschweißen / Spot welding Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Nebelabsaugung / Mist collection Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, mileage: 58,000 km, power: 88 kW (119.65 HP), first registration: 04/2021, fuel type: diesel, overall weight: 2,501 kg, next inspection (TÜV): 03/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,935 mm, total width: 1,845 mm, total height: 1,859 mm, loading space length: 2,150 mm, loading space height: 1,200 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, FORD Transit Connect long wheelbase L2 panel van, Trend trim, 88 kW, with optimal equipment, ideal for trades and businesses. Tow hitch with 1470 kg towing capacity 2.501 t GVWR, extra increased payload Aluminum rims (summer tires) Heated windshield Heated seats on both sides Fsdez Rq Ezspfx Ap Dopn Air conditioning with pollen filter Auxiliary heater for diesel engine Audio Package 2 - Radio DAB (Digital Radio), FM, AM - USB port, Bluetooth audio - Hands-free system, Bluetooth interface, controls on the steering wheel - Voice control for phone Multifunction steering wheel Driver assistance systems: - Rear parking pilot system, optical and acoustic display - Trailer stability assist - Hill start assist - Brake assist/emergency brake assist - ABS, ASR, ESP On-board computer/trip computer Electrical package: - Electric windows - Electrically adjustable and heated exterior mirrors (switch) Central locking with remote control Airbag for driver and front passenger side Fog lights Tire repair kit Appearance: Front bumper painted in vehicle color Model update Commercial vehicle registration / N1 Rear double doors without glazing, opening angle 180 degrees Wheelbase 3062 mm Driver's seat, adjustable (height, backrest, lumbar support) Front passenger single seat, adjustable (backrest) Seat cover fabric Steering wheel adjustable Engine 1.5 L - 88 kW EcoBlue TDCi CAT 6-speed manual transmission Load compartment equipment: Shelving system from Würth (similar to ALUCA, Bott, Sortimo). Left side shelving with storage compartments, storage trays, and 2 drawers. Load compartment partition without window. Plastic-coated wooden floor. Side walls lined. LED load compartment lighting. Ventilation. Load compartment dimensions (approximate): - Length at the bottom: 215 cm - Length in the middle/top: 180 cm (due to partition and rear) - Height: 120 cm (under cross member) Maintained according to FORD service records, digitally available: 05.2022 / 27,829 km: Inspection + oil change + interior filter 05.2023 / 43,343 km: Inspection + oil check + brake fluid + brake pads 05.2024 / 49,167 km: Inspection with oil change + interior filter 06.2025 / 54,875 km: Inspection + air filter + fuel filter + brake fluid Oil service is currently due Mounted tires: Winter tires 205/60 R16 on steel rims with approximately 5 mm tread depth at the front and approximately 7 mm at the rear Additional tires: Summer tires 205/60 R16 on aluminum rims with approximately 7 / 7 / 7 / 7 mm tread depth Despite careful processing, input and data transmission errors may occur in the vehicle description, including images. Errors and prior sale are reserved.

Year of construction: 2025, condition: like new (used), It is to be used for a Chemical Vapor Deposition machine but can also be used in other inflammable gas ventilcation. Fedpfx Aezvh Ewop Dspn

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. Fpsdpfxez N Am Ue Ap Don The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, mileage: 10,32,351 km, power: 184 kW (250.17 HP), first registration: 12/1998, fuel type: diesel, number of seats: 53, gearing type: mechanical, Equipment: ABS, electronic stability program (ESP), In accordance with our “General Terms and Conditions,” without any warranty or guarantee, we can offer you the following vehicle on a non-binding basis until a deal is concluded, subject to errors, typos, and prior sale: Setra S315 UL Bus 53+49+1 (Vehicle 266) First registered: 11.12.1998 1,032,351 km Engine: 11,967 ccm 184 kW / 250 hp Overall length: 12,000 mm Overall width: 2,500 mm Fpedjz Rkr Iopfx Ap Don Overall height: 3,350 mm 52 seats + 49 standing places + 1 driver's seat Single door at the front, double door at the rear 2 x ventilation via roof vents Auxiliary heater + additional heater 6-speed manual transmission Radio Destination display Large luggage compartment underneath Full air suspension Tires 295/80R22.5, front approx. 50%, rear approx. 40/40% 2 x spare wheel Clean, German, well-maintained bus Price: € 8,500.00 (net) All information is provided without any warranty or guarantee. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to € 10,000 is the Amtsgericht Ludwigslust; for disputes exceeding this amount, it is the Landgericht Schwerin. Subject to errors, typos, and prior sale.

Condition: excellent (used), Special opportunity – ideal also for aid organizations and crisis areas! From the assets of the federal government, we can offer you this top-condition intensive care ventilator, type LTV 1000, from the world-renowned brand "Breas" or "Pulmonetic," as a complete system! The LTV 1000 is one of the best-selling systems worldwide for mobile medical intensive care ventilation and is particularly distinguished by its compact design and robust technology. It handles almost all ventilation types and operates fully automatically. It is also ideally suited for both adults and children and can be operated temporarily using the built-in batteries. Due to its compact design and low weight of approximately 6 kg, the device is also ideal for use in rescue helicopters or ambulances. Thanks to the integrated screen, the system can operate completely independently; no additional computer or similar is required. The device sets were primarily designed for use in mobile field hospitals and clinics and are stored in special Zarges boxes, including all accessories. They are in top condition and have generally only been put into operation for testing purposes – no commercial use has taken place, everything is in perfect, undamaged condition – see pictures. All devices have been tested for functionality, pass the self-test without any restrictions, and were equipped with new batteries in August 2026. Scope of delivery: - Pulmonetic LTV 1000 intensive care ventilator - Device trolley - Screen - Power supply unit - Hoses and connections - Documentation in German and English - Zarges aluminum box For the sake of clarity, we would like to explicitly point out that in the case of professional use, the legally required maintenance/inspections, e.g. MTK/STK, must be carried out again. The total weight of the system, including accessories and pallet, is approximately 70 kg! Insured shipping via a freight forwarder is possible for an additional charge. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Fpodpfx Aozzawijp Den Private buyers have the option of purchasing the device "on behalf of a customer"; a direct commercial sale to private individuals is expressly not possible! The price refers to one system each, including all items listed in the scope of delivery – see pictures. The goods are sold excluding any warranty or liability for defects. The exclusion does not apply to claims for damages arising from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, or health. Please do not hesitate to contact us at the address provided if you have any questions regarding prices or technical details.

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Fpjdpfx Apexg Ickj Djn Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 5x Ventilator 7,5kW Total power apprx. 45.000 m3 / hr. Recuperation system for returning the hot air back Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Year 2010 Fedpfxsrft Aij Ap Djpn Possible to sell immediately only as a complete set.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine Fpodpfxsz Rl E No Ap Djn - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: used, Year of construction: 2006, Zum Verkauf steht ein Posten pneumatischer Ventile und Antriebe des Herstellers Festo. Gesamtmenge: 42 Stück – 28 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – 14 Einheiten: pneumatische Antriebe / Komponenten Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Fodoyxqluepfx Ap Dspn Geeignet für: – Industrieautomation – Lebensmittel- und Getränkeindustrie – Chemische Industrie – Wasser- und Prozesstechnik – Wartung und Ersatzteile Neupreis vergleichbarer Festo Einheiten: ca. 150–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 2.900 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: lot of pneumatic valves and actuators by Festo Total quantity: 42 units – 28 complete units with stainless steel ball valves – 14 units: pneumatic actuators / spare components The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – industrial automation – food & beverage processing – chemical industry – water treatment and process systems – maintenance and spare parts supply Estimated new price of comparable Festo units: approx. 150–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Price: 2,900 € negotiable Location: Slovakia (EU) Worldwide shipping possible

Condition: excellent (used), Special opportunity – also ideal for aid organizations and crisis areas! From government stock, we can offer you this top-condition Evita 4 intensive care ventilator, a world-renowned product from "Dräger," as a complete system! The Evita 4 is one of the most widely used systems worldwide for medical intensive care ventilation and is particularly distinguished by its compact design and robust technology. It supports almost all ventilation types and operates fully automatically. Furthermore, it is ideal for both adults and children and can also be operated temporarily using the built-in batteries. The device sets were specifically designed for use in mobile field hospitals and hospitals and are stored in special Zarges boxes, including all accessories. They are in top condition and were generally only put into operation for testing purposes – no commercial use has taken place; everything is in perfect, undamaged condition – see pictures. All devices have been tested for functionality, pass the self-test without restrictions, and are equipped with functioning or new batteries. Scope of delivery: - Dräger Evita 4 intensive care ventilator - Device trolley - Medication nebulizer - Breathing air humidifier - Power supply - Hoses and spare parts - Documentation in three languages - Zarges aluminum box (approx. 120 x 80 x 75 cm) For the sake of good order, we would like to explicitly point out that, in the case of professional use, the legally required maintenance/inspections, e.g., MTK/STK, must be carried out again. The following ventilation modes can be selected: - Volume-controlled ventilation PLV and AutoFlow - Sigh - SIMV - ASB - BIPAP - BIPAPAssist - APRV Fpjdpozdt Dbofx Ap Dsn - MMV - Flow measurement - CPAP - IPPV / IPPVAssist - IRV - BTPS The total weight of the system, including accessories and pallet, is approximately 140 kg! Insured shipping via a forwarding agency is possible for an additional charge. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly not permitted! The price refers to one system each, including all items listed in the scope of delivery – see pictures. The goods are sold with the exclusion of any guarantee or liability for defects. This exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body and health. Please do not hesitate to contact us at the address provided if you have any questions regarding prices or technical details.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety Fpedoz Rl Nzjpfx Ap Don - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: like new (used), GIF Kitchen Ventilation Ceiling Ventilation Ceiling System The optimal solution for kitchen ventilation, commercial kitchens, and the food industry. The best alternative to extractor hoods GIF kitchen ventilation ceilings are installed in: • Company canteens • Hospitals, clinics • Restaurants / hotels • Retirement homes, homes for the disabled, and children • Military accommodations, field kitchens • University cafeterias, school kitchens • In-flight catering • Correctional facilities • Public facilities Patented quality – Made in Germany The GIF kitchen ventilation ceiling is a complete, wall-to-wall, surface-active solution including large-area exhaust and supply air panels, lighting, and compensation surfaces with an installation height of just 200 mm. The use of the ceiling cavity as a pressure chamber in accordance with VDI 2052 enables implementation as an "open" or "closed" system, always maintaining the largest possible proportion of air-active surfaces. The large-scale capture of frying, cooking, and other fumes, as well as the large-scale, low-turbulence supply air intake, guarantee a comfortable climate free from condensation and drafts. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. On the supply air side, the GIF active cassette ceiling is used for low-turbulence, large-scale supply air intake according to the stratified flow principle. An energy-efficient solution is thus standard. The special design ensures indirect supply air guidance, even for high air volumes at low inlet velocities, without an induction pulse. Since the active cassettes are identical in the exhaust and supply air areas, they can be interchanged at will. Facts and Benefits Complies with or exceeds current guidelines (VDI 2052, VDI 6022, EN 16282), including accessibility to underlying components (no access openings required). Durability of the material: CNS 1.4301 Integrated deflection system for rapid pulse reduction Economical and hygienic cleaning of only 4 parts per m² in the dishwasher Pulling and pushing of the active cassettes in the support profiles makes them easy for anyone to remove without tools Partial cleaning possible as needed No need to climb onto greasy, hot kitchen appliances (risk of slipping) HACCP-certified process Technical Specifications Exhaust Air Air flow rate: 260-300 m³/h m² Separation efficiency: up to 97% Dimensions: 500×485 mm Pressure drop: 20-25 Pa Material/Surface: CNS Material No. 1.4301 Weight per m2 without support structure: 10.00 kg Draft air flow: 360-500 m3/h m2 Dimensions: 500×485 mm Pressure drop: 25-30 Pa Material/Surface: CNS material No. 1.4301 Weight per m2 without support structure 10.00 kg Airflow velocities: less than 0.2 m/s Ceiling area: 6500 x 3000 mm 19.50 m² 300 supply air flat ceilings, 250 x 485 mm 200 supply air flat ceilings with sound absorption, 250 x 485 mm 220 active cassette ceilings, 500 x 485 mm 14 system support profiles, 6500 mm 7 system support profiles, 2000 mm Lighting fixtures installed flush with the ceiling in the GIF ventilated ceiling Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes – new and used – can be found in our shop! Fpodpst Hglkofx Ap Don International shipping costs upon request!

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Fpjdpfjx Tuyxjx Ap Dsn

Condition: used, power: 10 kW (13.60 HP), input voltage: 230 V, total length: 1,150 mm, total width: 800 mm, total height: 670 mm, overall weight: 85 kg, fuel type: electric, - Dimensions (L x W x H): 800x1150x670mm - Brand: Bake OFF ITALIANA - Serial number: 01980063 - Model: MISTRAL 5T - Temperature: 270°C - Baking trays: 400x800, 400x600 - Tray spacing: 90 mm Fpjdjzyulxepfx Ap Djn - Power: 10 kW - Voltage: 230V - Weight: 85 kg Features of the 5-tray electric convection oven Bake Off Mistral 5T - BakeAIR multi-fan system for uniform heat distribution. - Double-pane, low-emissivity glass for superior insulation. - LED interior lighting for perfect visibility. - High-performance thermal insulation for maximum energy efficiency. - BakeCLEAN automatic washing system for easy maintenance. - Blue LED lighting to check the cleanliness of the baking chamber. - Five fan speeds and semi-static baking for precise results. - Five baking methods for exceptional versatility. - Automatic opening of the BakeDRY flue for precise control. - Program block with password for increased security. - Baking chamber with rounded corners for simplified cleaning. - CE certification for compliance with European standards. - Automatic dry/steam control in the chamber for perfect dishes. - Automatic control of the baking level and batch loading. - Steam control in percentage with BakeSTEAM. - Multi-timer function for multiple and mixed baking cycles without worry. - Storage, display, and export of baking data (HACCP). - Operating modes with customized, manual, or pre-defined programs. - EAC certification for compliance with Eurasian standards. - Modular design for optimal adaptability. - Automatic preheating for quick baking. - Delayed start programming for flexible time management. - Delayed baking programming for increased convenience. - Pre-loaded cookbook available online for culinary inspiration. - Automatic detection and error reporting for peace of mind. - Safety rinse for worry-free maintenance. - Stackable design to save space. - Ventilation with reversing, speed control, and motor brake for optimal performance. - Inner glass that can be opened for easy cleaning.

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 4x Ventilator 7,5 - 11,0 KW Total power apprx. 40.000 m3 / hr. Recuperation system for returning the hot air back Waste entry in container Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Fjdpfeyzch Tsx Ap Dspn Possible to sell immediately only as a complete set.

Condition: used, mileage: 4,35,000 km, first registration: 08/2020, fuel type: diesel, fuel: diesel, Year of construction: 2020, RENAULT PREMIUM C 480 8x4 with MEILLER 3-sided steel tipper body EXCELLENT CONDITION!! • Emission standard: EURO 6D • Engine displacement: 12,777 cm³ • Power: 360 kW / 480 hp • Wheel arrangement: 8x4 • Intarder / RETARDER • Automatic transmission • Differential lock • Hill start assist • Variable speed limiter - Speed Mode • Exhaust gas reducer • Headlight range adjustment • Automatic climate control • Large RENAULT navigation system • Telephone • CB radio • USB port • HIFI speaker system • Multifunction steering wheel • Driver's comfort seat, heated and ventilated • Air-suspended co-driver's seat • Adaptive cruise control • Emergency braking assistant • Lane keeping assist • Leaf spring suspension • Wheelbase: 4,400 mm • Rear axle: 2 x 13-ton AP axles, parabolic suspension • Unladen weight: 15,048 kg • GVWR: 32,000 kg; 41,000 kg technically possible! • Max. total towing weight: 70,000 kg • Tires: 315 / 80 R 22.5 front • Tire tread depth: between 8 and 15 mm • Trailer hitch - pintle hook • Air/electrical connection • Preparation for drawbar coupling BODY: MEILLER D421 • 3-sided steel tipper • BORDMATIK on the left side • 2 x 6 tie-down points in the body • Hopper - German vehicle! - 1st owner / driver = owner! Fpedpfxoz Rkaxs Ap Don - MOT/TÜV: 08/2027 - On request and for an extra charge: NEW! Errors and prior sale excepted!