Used Charmilles Wire-Cut Electro-Discharge Machine for sale (68,429)

Condition: repair required (used), functionality: limited functionality, Year of construction: 2014, TRUMPF TruLaser 5030 fiber Year of manufacture: 2014 5,000 Watt TruDisk 5001 Siemens 840D SL Special price due to site closure / insolvency Update 05/27/2026: The machine has been thoroughly cleaned. It is in considerably better condition than can be seen in the photographs. For sale is a used TRUMPF TruLaser 5030 fiber from 2014. The machine was in continuous productive use until 2025 and, according to the previous owner, operated without any known problems. Subsequently, the system was shut down for approximately one year as part of an insolvency and was no longer operated. Currently, the machine is not connected and therefore cannot be demonstrated. Ideal machine for a buyer who wants to refurbish, clean, connect and put the system back into operation themselves. For this purpose, the machine is available at an exceptionally attractive special price. Extremely affordable. Purchase price in 2014 was approximately EUR 300,000. Technical data Manufacturer: TRUMPF Model: TruLaser 5030 fiber Year of manufacture: 2014 Machine type: Laser cutting system Laser source: TRUMPF TruDisk 5001 solid-state laser Laser power: 5,000 W Control system: Siemens 840D SL Working area / max. sheet size: 3,050 x 1,550 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Rapid traverse: 280 m/min Max. workpiece weight: 900 kg Max. sheet thickness: 10 - 25 mm according to documentation Operating voltage: 400 V / 50 Hz Machine weight: approx. 12,000 kg Installation dimensions L x W x H: approx. 9,500 x 6,300 x 2,500 mm Color: gray / blue Cabin: Protective cabin Equipment TRUMPF TruDisk 5001 solid-state laser Laser cooling unit Cooling unit for system Universal cutting head Multi-chamber extraction system Light barriers Electric roll-up roof Hydraulically adjustable pallet changer Protective cabin Notes on condition Machine currently not connected Test run currently not possible Operating hours could not be read out Machine was idle for approximately one year due to insolvency Connection cable to the main power supply has been cut, must be replaced Machine, cooler and extraction system should be cleaned and technically inspected Filters / maintenance should be renewed or carried out before recommissioning Machine documentation is not completely available according to the expert opinion, but the manuals can be quickly obtained digitally Positive aspects Cutting head was renewed in 04/2021 Machine was in use until 2025 Very interesting basis for self-refurbishment Remarkable special price possible Sale Location: Germany Availability: immediately Price: on request / special price Condition: used, currently not demonstrable Sale from location, as inspected Ppedpfx Anjy Tmcxotet Errors, prior sale and technical changes reserved.

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 Ppjdpsgqkc Nsfx Antjt CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low operating hours Cleaned, measured, tested, and various wear parts replaced. EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation Ppsdpfx Ansy Ti Htotjt MultiProg Powertec technology programming on PC/NC Powertec Easy Burn rapid programming Powertec handheld multifunctional control unit Manual eroding with Powertec handheld EAGLE Powertec – Fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High Speed Jump max. 18,000 mm/min. Travel distances (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode holder min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Cooling unit

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 12 h, degree of automation: semi-automatic, laser type: CO₂ laser, laser hours: 12 h, laser power: 1,000 W, sheet thickness (max.): 2 mm, Equipment: cooling unit, documentation/manual, Almost new Fanuci welding machine, 1000 W. Everything is in good working order. Used for approximately 20 hours. Includes a wire feeding mechanism. The production processes changed, and the machine is no longer needed. Ppsdpoy T I Dkjfx Antst

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled Ppsdpsyah R Nofx Antjt - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Year of construction: 2004, condition: ready for operation (used), - USED - CO2 LASER SOURCE SOURCE: ROFIN DC 030 ; 3000 W WEIGHT: 570 Kg Psdpjy R E Unefx Antjpt

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz Ppodpoupbf Dsfx Antot - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Psdpfx Aog Ev T Ejntspt Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Pro Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine from Franz Pytlik Maschinen, Nürnberg. Robust cast iron construction designed for precise cutting of large formats in binderies and printing houses. The machine offers an impressive cutting width of 112 cm, enabling the processing of oversized sheets. The worktable depth is 72 cm. The knife mechanism operates smoothly and effortlessly, while the rear guide, adjustable via handwheel, allows for accurate format positioning. Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Type: manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Heavy-duty cast iron frame – Cutting lever with wooden handle Ppsdpfjy Nmycex Antot – Rear guide adjustable by handwheel – Large, stable work surface – Lower shelf for sheets and tools – Knife in good condition (can be resharpened) Technical condition: The machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in a bindery, printing house, technical workshop or model making studio.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: SRS CW 2000 2025/1, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 36 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing metal, stone, and concrete surfaces. Delivery is available within Germany and Austria. As a service provider specializing in surface processing, we can offer you machines tailored to your requirements! Transport costs: Depend on your location and delivery terms Delivery: 4 weeks (working days) after receipt of payment via air freight - Air freight duration: approx. 2 weeks The equipment is NEW and is configured and set up according to customer specifications! Configuration and pricing depend on the customer's requirements and application area. We offer professional training in the operation of the equipment in compliance with UAVA/UVV regulations in both Austria and Germany. As we are a service provider with hands-on experience using our equipment, we can guarantee their functionality. We provide comprehensive on-site instruction, workshop-based training, or customer-specific demonstrations. Payment options: RENTING / LEASING / PURCHASE Technical specifications: Model: RST-FLC-2000W 2026 Laser: Fiber laser Pjdpjtxlyrofx Antspt Laser power: 1000W / 2000W / 3000W (or Laser: Pulsed 100W to 1000W) Laser wavelength: 1064nm or 1080nm±5 Frequency: 10–50KHz Air or water cooling Net weight: approx. 170kg Dimensions: 98 × 122 × 143 cm Scan width: 5–50 cm Functions: Handheld or automatic Operating temperature: 0–40°C Operating mode: CW Wavelength (nm): 1025–1070 Standard output power: 15KW Laser beam quality (mm*mrad): 4 Adjustable frequency (Hz): 400 to 50,000 Transmission fiber diameter: 50/100 Output power stability: ±2 Power supply: 250V / 16A Operating temperature (°C): 5~35 GUARANTEED at the best price! – RENTING / LEASING / PURCHASE All devices are individually assembled and delivered according to your requirements and our experience. – Product demonstration – 24-hour support – Includes maintenance, service & repair We also provide: INDIVIDUAL training in accordance with the UAVA / UVV safety regulations for commissioning laser machines for surface processing. Comprehensive safety consulting regarding the use of laser equipment in compliance with occupational and safety regulations. Routine inspections in accordance with applicable safety standards.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: Puls 300, control type: manual, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 300 W, laser wavelength: 1,064 nm, power: 5 kW (6.80 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: DC, type of cooling: air, overall weight: 64 kg, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, !! New Series 2026 !! Pulse Laser Cleaning Machine 100W to 1000W - Cleaning and processing of metal / wood / stone and other materials - 300W 1-10mj Air cooled €22,650 - 500W 15mj Air cooled €32,000 - 500W 15mj Water cooled €42,000 - 1000W 20mj Water cooled €64,000 The machines are BRAND NEW and configured and set up according to customer requirements! The configuration and price depend on the customer’s specifications and application area and are programmed with our proprietary software! We provide professional training for operating the equipment in accordance with UAVA / UVV standards in Austria and Germany. Ppedpfx Anoufgnhetjt As we are service providers and work with these machines on a daily basis, we can guarantee their functionality. We offer comprehensive on-site introductions or workshops at our premises, as well as customer-oriented demonstrations in Germany & Austria.

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, Hydraulic cutting machine MINI ATOM SE 8 Pressing force: 8 tons Table dimensions: 600mm x 300mm Hammer dimensions: 300mm Pedpoy Tw Ncjfx Antept Maximum stroke: 90mm Motor power: 0.9kW Weight: 430kg Overall machine dimensions: 600mm x 690mm x 1330mm Two-hand operation for guaranteed work safety Simple and intuitive operation Machine in very good technical condition Option for courier delivery to the customer More information: +48 662 448 730

Year of construction: 2016, condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MAX CUTTING THICKNESS: 16 mm mm MIN CIRCULAR SECTION: 80 mm MAX CIRCULAR SECTION: 610 mm MAX SQUARE SECTION: 400x400 mm MAX RECTANGULAR SECTION: 500x300 mm SOURCE: ROFIN DC045 ; 4500 W CONTROL UNIT: SIEMENS 840D WEIGHT: 100000 Kg Ppjdpfeytkdlex Antet ACCESSORIES: FUME EXHAUSTER NOTE: LENGTH OF LOADING BAR MIN.4.000-MAX 18.000 mm; LENGTH OF UNLOADING BAR MIN. 3.000 - MAX 12.500 mm; SHORT PIECE UNLOADING LENGTH UP TO 3.200 mm; 3D HEAD; CAPACITIVE SENSOR; AUTOMATIC SETTINGS; BOOSTER; FOCUS AUTOMATIC ADJUSTMENT

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Model: C3 Working Area: 3048mm*1524mm Laser Output Power: 40kW/30kW/22kW/20kW/12kW/6kW/3kW/2kW/1.5kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet C Series is capable of cutting edges of thin sheets and ensures no quivering marks. 4.Stretching Aluminum Crossbeam Ppsdjg Iwypspfx Antet Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% 5.Welded Bed with Tenon-and-mortise Joint Each frame of bed is welded after mortise-and-tenon joint to achieve better stability and firmness.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 Ppsdpfx Asy Snbmsntot - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Ppsdsyxc Afspfx Antet

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) Pjdpfx Aetmp T Dsntept - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Possibility to equip the machine with additional accessories for an extra charge.

Condition: used, functionality: fully functional, Combined profile shear (ironworker) for metalworking. Punches, cuts, notches, and severs structural steel (angles, flat bars, round bars, square bars) in a single machine. Robust East German/West German industrial design – extremely durable, easy to maintain, no high-tech frills. Features a large base plate and multiple workstations. Ideal for locksmiths, steel construction companies, metalworkers, blacksmiths, training workshops, or well-equipped hobbyists with sufficient space. A comparable new machine costs well over 15,000 EUR. Technical data: - Design: Combined profile shear with multiple stations (punching, shearing, notching, profiling) - Drive: Three-phase motor 400 V - Shear blades: included - Punching tools: included (see photo) - Steel base plate: cast, very stable - Machine weight: approx. 1,500 - 2,500 kg - Year of manufacture: approx. 1970s-1980s Collection / Transport: Self-collection with a heavy-duty forklift (>= 5 tons) or crane. Loading on site is possible. Shipping via a low-bed trailer is available by arrangement. Ppodpfxozabv So Antjt

Condition: new, functionality: fully functional, Year of construction: 2020, useful working area: 3000x1500 mm laser head: klinge or precitec (option) X/Y return accuracy: 0.05mm/1000mm table capacity: maximum 800 kg max. speed: 120m/min max. acceleration: 1.5G cutting gas requirement: Oxygen and nitrogen Ppjdpfx Anjy It Ttjtjt Fiber laser: IPG 2500W metal cutting: steel, stainless steel, stainless steel coated steel, galvanized steel and aluminum (in case of 1kW) weight: 7500 kg exchangeable table surface: yes (2 tables, automatic table changer) cover: yes.

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min - Rapid traverse on U, V axes: 450 mm/min Ppsdpfxexd R Hms Antot - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Ppjdpfsucpqtex Antst Pneumatic material clamps Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Ppedshv U Tqepfx Antst CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, degree of automation: automatic, actuation type: electric, controller manufacturer: SUDA, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 6000W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, total length: 8,450 mm, total width: 2,950 mm, total height: 2,320 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, FIBER LASER CUTTING MACHINE MTP F-6000 – 6000W High-performance fiber laser cutting machine designed for precise sheet metal processing. The MTP F-6000 combines a robust machine structure with high-quality components, ensuring excellent cutting quality, high working speed, and long service life. The machine is equipped with a 6000W laser source, an auto-focus cutting head, and a CNC control system. It is ideal for production plants, metal processing companies, and industrial workshops. The heat-treated frame structure ensures resistance to deformation and long-term precision. Key features: 6000W laser source Auto-focus cutting head CNC control system Linear guides Helical rack drive Rigid machine construction Automatic lubrication system Water cooling system Protective enclosure Advantages: High efficiency and cutting speed Excellent edge quality Low operating costs Easy operation Reliable continuous operation Applications: Steel structures production Sheet metal processing Automotive industry HVAC and ventilation Production of enclosures and metal parts Technical data: Model: MTP F-6000 Working area: 3000 × 1500 mm Laser power: 6000 W Cutting head: Auto Focus Control system: CNC Drive: Servo drives Guides: Linear Transmission: Helical rack Cooling: Water cooling system Lubrication: Automatic Construction: Welded, heat-treated frame Cutting capacity (6000W): Mild steel: up to approx. 25 mm Stainless steel: up to approx. 16 mm Pjdpfxsyv Dx Aj Antjpt Aluminium: up to approx. 14 mm Standard equipment: 6000W laser source Auto-focus cutting head CNC control system Chiller Extraction system Working table Protective enclosure Optional equipment: Air compressor Dust extraction system Exchange table

Condition: excellent (used), REMS TORNADO 2010 THREADER Ppodpfx Anjv T Truetjt Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 Ppjdpfx Aneym Unzstst - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.