Used Chen Hsong Jm1400-C3-Svp/2 for sale (79,288)

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Ijdpfxsv Sw E Ae Alxjtk Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: used, power: 33 kW (44.87 HP), Year of construction: 2010, operating hours: 2,910 h, Equipment: cabin, front linkage, * Stoll vacuum superstructure with supports * Flatbed body * Articulated steering * Front attachment with hydraulics & PTO * Rear mounting bracket with PTO * Work lights & beacon Itsdpjvhv Smofx Alxjk * 3000 kg permissible total weight * 31x15.50-15 tires -----Errors and prior sale excepted Vehicle number 5058 WhatsApp support available! If you have questions about the vehicle or need more information, feel free to contact us conveniently via WhatsApp

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Itsdpfx Aozlpv Aelxsk Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Iodjzlqdzspfx Alxstk Turning length: 320 mm Turning diameter: 32 mm MACHINE DETAILS Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chip conveyor Parts conveyor belt

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 10 l, Material Conveying Unit Simar FX 2504 Motor Power: 1.1 kW (brushed motor) Power Supply: 230 V / 50 Hz Container Capacity: approx. 5 litres Conveying Performance: approx. 150 – 200 kg/h (depending on material) Maximum Conveying Distance: approx. 15 – 20 meters Pipe/Hose Diameter: 38 mm (DN 38) Housing Material: Polished stainless steel Colorant Doser Simar FDX-2 Drive Type: Stepper motor (high RPM repeatability) Power Supply: 230 V / 50 Hz Iedpsy Hlv Rofx Alxetk Speed: Infinitely adjustable (depending on control unit, typically 0.1 – 200 rpm) Color container capacity: approx. 5 – 10 litres

Condition: new, * IMMEDIATE AVAILABILITY * with black body, 100 km/h approval, rear supports, alloy wheels Technical Specifications: • Type: New vehicle • TÜV inspection: New/2 years • Availability: IMMEDIATE! • Gross vehicle weight: 2,000 kg • Unladen weight: approx. 550 kg • Payload: approx. 1,450 kg • Internal dimensions: 302 x 168 x 188 cm (L x W x H) • Overall external dimensions: 442 x 210 x 244 cm (L x W x H) • Loading edge height: approx. 55 cm • Tyres: 14-inch alloy wheels • Brakes: yes • Jockey wheel: yes • 100 km/h approval: included! • incl. vehicle documents Body Construction: • Floor: 15 mm hardwood, anti-slip phenolic plywood • Walls: 15 mm multiplex wood, plastic-coated • Roof material: 15 mm multiplex wood, plastic-coated • Running gear: KNOTT rubber torsion axle • Number of lashing rings: 6 • Rear door: YES • Tailgate: - • Tailgate material: Plywood • Tailgate/door locking system: Rotary bar lock • Interior light: Yes, LED with switch • Support legs: Yes, 2 pcs • Overrun coupling & brake: Yes, KNOTT • Frame/chassis: V-drawbar, hot-dip galvanized • Lighting connector: 13-pin • Registration: ZBII & COC documents Standard Equipment: • Robust V-drawbar, hot-dip galvanized • KNOTT overrun device • 15 mm thick base plate • Side walls and roof made of 15 mm multiplex wood, UV-resistant black plastic coating • Interior LED light installed • Galvanized rotary bar lock and hinges • Shock absorbers + 100 km/h approval • Aluminum wheels • 6 lashing rings fitted to the floor • Jockey wheel • Automatic reverse function • Plastic mudguards • 13-pin plug • Reversing light • Large-size safety lights • Integrated rear fog light • Splash-protected body construction • Registration documents: ZBII & COC Optional accessories – on request: • Anti-theft device • Motorcycle wheel chocks • Motorcycle rails • Motorcycle lashing straps • Additional lashing straps • Additional lashing rings • Slotted rails for load securing straps & locking bars • Rubber-coated lath rails for securing straps & locking bars • Load securing bars – steel or aluminum • Additional interior lighting • Reversing lights • and much more New vehicle with warranty and TÜV certification. ————— - Financing or leasing available - Nationwide delivery possible - Vehicle registration documents can be sent in advance or export/transfer registration plates (Germany) can be provided. Itjdeyyw Ifopfx Alxek - Export plates with customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! For over 30 years, we have been specialist dealers & service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, mistakes, and prior sale excepted -

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Ijdjhxvu Espfx Alxjtk Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Year of construction: 2012, condition: ready for operation (used), A repair-required OTI shot blasting machine is offered. 1) OTI GG A2-2500 blasting system, working length: 6000mm. 2) OTI blasting cabinet, cabinet dimensions X/Y/Z: 1650mm/13500mm/3800mm, internally illuminated, with automatically guided blast nozzles and rubber curtains for cabinet protection. 3) Chain conveyor unit, continuously variable motor-driven, with chain guide, roller conveyor, tension frame bearing and chain tensioner. 4) Oscillation, continuously variable motor-driven. 5) Blast media filling station, pneumatically operated, filling hopper: approx. 150kg, with level probe and shut-off slide, max. filling weight: approx. 200kg. 6) Cyclone separator/pre-separator system for separating reusable and spent blast media, with blast media recirculation into the blasting process and Big-Bag collection. 7) Filter system with radial fans, 2x 8 filter cartridges, cartridge dimensions X/Y: 330mm/1000mm, filter area: 14m²/cartridge, extraction capacity: 10000m³/h, with compressed air cleaning. 8) Final filter with pleated filter elements, 2x 2 filter elements, filter element dimensions X/Y: 915mm/915mm, separation efficiency: 99.9%. 9) Control cabinet with controller: Moeller Easy 820/618. 10) Operator panel with beacon/signal light, display, start pushbutton, key switch, emergency stop pushbutton and pressure gauges for operating pressure and inlet pressure. 11) Pressure vessel Maschinen- und Behälterbau GmbH, type MB 030603-1.1000, year of manufacture: 2012, volume: 1000l, permissible pressure: 11bar, min./max. permissible temperature: -10°C/50°C. Documentation available. An on-site inspection is possible. Ijdpfx Aozp Rg Rolxetk

Condition: used, maximum load weight: 16,250 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 05/2016, Year of construction: 2016, Internal vehicle number: G300388 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 3,750 kg Subject to errors and omissions. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH Iedpfoyxiyqox Alxstk We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Iedeudk Amopfx Alxstk

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Isdpjudk Agefx Alxjtk

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor Iedpfx Alsvydfljxetk -Manufacturer: Siemens, milling motor electric motor type 1PC3084-2AA20 Z -Power: 50 Hz 1.25 kW 2880 rpm / 100 Hz 2.0 kW 5885 rpm -Voltage: 220/380 V -Mounting shaft: Ø 30 mm -Quick clamping system: Leuco with saw blade Ø 200 x 3.2 mm -Dimensions: 390/300/H220 mm -Weight: 36 kg

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Key features: Turning diameter: approximately 210 mm Turning length: approximately 200 mm Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Iodpfxozpd Alo Alxotk Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.

Condition: used, functionality: fully functional, Festo DGC-32-3600-KF-PPV-A Linear actuator. Two units in stock, price is for one pc only. Good working condition. Itsdpfxstwqt Io Alxsk Please check out our other listings as well.

Condition: as good as new (ex-display), Year of construction: 2024, High-quality spindle with precision tapered roller bearings Hardened and ground table guideways Turcite-B coated counter guides for high wear resistance and low friction Integrated grinding wheel removal device Machine base made of sturdy, torsion-resistant cast iron for maximum rigidity and stability Backlash-free V-flat guide in the Z-axis and flat guides in the X- and Y-axis Trapezoidal threaded spindle in the Y-axis Manual central lubrication All flat guides are finely scraped, guaranteeing high precision of all manual movements LED lamp Safety electrics with 24 V DC voltage Sanding accuracy: 0.005 mm Grit 46 corundum grinding wheel for all common steels included as standard Two-channel safety electrics EMC filter class Significant energy savings thanks to IE3 motor Coolant system with external coolant tank Dimensions and weights Length approx. 1970 mm Width/depth approx. 1300 mm Ijdpfx Alow Eay Isxjtk Height approx. 1700 mm Weight approx. 850 kg Electrical data Power drive motor 1.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 200 mm Clamping surface width 500 mm Grinding wheel(s) Outer diameter 200 mm Width 20 mm Bore 31.75 mm Peripheral speed 33 m/s Spindle Speed 2850 min¯¹ Concentricity 0.005 mm X-axis Feed speed Manual

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3084-2AA99 -Power: 50 Hz 1.6 kW 2845 rpm / 100 Hz 2.8 kW 5790 rpm Itodpfx Aovy Sx Tolxjk -Voltage: 220/380 V -Mounting shaft: Ø 30 mm -Quick clamping system: Leuco with saw blade Ø 190 mm -Dimensions: 395/210/H200 mm -Weight: 25 kg

Condition: used, Westtech Woodcracker G1250 Root Rake - New equipment In stock - Working width: 1250 mm - Own weight approx. 1420 kg - Hydraulic flow rate: 50-90 l/min - Operating pressure: 200-250 bar - Carrier vehicle: approx. 15-22 tons - 2x hydraulic grapple arms - Optional: fine rake Many adapter plates available on request. We are an official sales and service partner for Westtech Woodcracker, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco, and with 800 used vehicles in stock, one of the largest commercial vehicle dealers in Germany. Isdpfjyfquzex Alxstk We offer the complete Westtech Woodcracker range for you! Rental available = More information = New: Yes Contact Tobias Ebert for further details.

Condition: like new (used), Year of construction: 2015, load capacity: 16 kg, arm reach: 3,100 mm, ROBOTERARM MANUFACTURER: KUKA MACHINE TYPE: KR30 L16-2 TECHNICAL SPECIFICATIONS CARRYING LOAD: 16 kg REACH: 3102MM YEAR OF CONSTRUCTION: 2015 CONTROLS: KRC4 Firmware: 8.3.21 Ijdpfxezulp Ds Alxotk

Condition: new, Bernardo Panel Saw Classic 3200 C The Classic 3200 C panel saw with tilting saw blade meets all the requirements of modern workshops and is the ideal machine for cost-conscious small and medium-sized enterprises. Both the robust design and the generous dimensions of the machine ensure optimal working conditions for cutting solid timber or large panels; even decorative panels can be processed effortlessly using the standard scorer unit. Features • Aluminum sliding table with hardened guide rails • Standard table extension and table widening for handling larger panels • Stable outrigger table allows processing of large and heavy sheets without additional assistance • Powerful drive motor ensures optimal cutting performance even during extended operations • User-friendly degree scale directly readable from the handwheel • Scoring unit with independent drive included as standard • Extendable telescopic fence (up to 3100 mm), mountable on the outrigger table front and back • Rigid saw unit guarantees vibration-free and precise operation • Machine body constructed from torsion-resistant steel and cast iron combination • Hinged rip fence with robust 40 mm round bar guide Technical Specifications Table size: 935 x 620 mm Sliding table: 3200 x 370 mm Crosscut length: 3200 mm Max. saw blade diameter: 315 x 30 mm Max. cutting height 90° / 45°: 90 / 65 mm Cutting width at rip fence: 1295 mm Table height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Outrigger table with roller: 1210 x 860 mm Main saw blade speed: 4000 / 6000 rpm Scoring saw blade speed: 8000 rpm Scoring saw blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 4.0 kW (5.5 HP) Motor input S6 40%: 5.5 kW (7.5 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3445 x 3560 x 1570 mm Weight: approx. 710 kg Itodpfx Aljywxrgjxsk Scope of Delivery • Saw blade guard with infeed roller • Mitre fence • Crosscut shoe • Table widening • Extendable telescopic fence • Longitudinal fence stops • Outrigger table with roller • Push stick • Scoring unit with independent motor • Operating tools

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3108-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5880 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Quick clamping system: Leuco with saw blade Ø 196 x 3.6 mm Ijdpfx Alovydbgexetk -Dimensions: 665/233/H235 mm -Weight: 48 kg

Condition: new, Year of construction: 2022, Manufacturer: RBC Robotics GmbH Type: Automation Brose oKMV Year of manufacture: 2022 Machine no.: 20380 Length: approx. 20,000 mm Width: approx. 1,500 mm Height: approx. 3,000 mm Number of robots: 5 Power supply: 3 × 400 V + N + PE / 60 Hz Power: 57 kW Max. fuse: 100 A Control voltage: 24 V DC Mains system: TN-S Max. short circuit current: 10 kA Pneumatic operating pressure: 6 bar Weight: 25 t Equipment: Production part collection and transfer stations KUKA industrial robots: Manufacturer: KUKA Itodezuy Ibepfx Alxok Series: CYBERTECH-2 Model: KR 16 R2010-2 / SEL Number of robots: 5 Year of production: 2022 Number of axes: 6 Payload: 16 kg Reach: 2013 mm Weight: 296 kg

Year of construction: 2021, condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone). Westtech Woodcracker G1250 Root Rake / incl. grab arms / in stock & available immediately / Year of manufacture: 2021 Price: €14,890.00 net / €17,719.10 gross - Working width (mm): 1,250 - Own weight (kg): 1,420 - Recommended oil flow (l/min): 50 – 90 - Recommended operating pressure (bar): 200 – 250 - Carrier vehicle operating weight (t): 15 – 22 Equipment: - Incl. grab arms Optional: Volvo S60 adapter plate incl. bolts and installation = €1,500.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and available immediately. We have a wide selection of various Westtech products in stock and available immediately! Mr. Herden (Tel.) will be happy to assist you. Iodpfoyix Iqjx Alxstk On request, we are also happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Subject to errors and prior sale! Internal no.: 621068 = More information = New: No Intended use: Construction Unladen weight: 1,420 kg Contact Marius Herden for more information.

Condition: like new (used), Year of construction: 2021, operating hours: 82 h, functionality: fully functional, machine/vehicle number: 4554513, KUKA KR10 R1100-2 / SEL KRC4 robot 2 units available, 1 with 135 operating hours and 1 with 82 operating hours – serial number 4554513 Itjdpjzly Agofx Alxok Year of manufacture: 10/2021 Serial number: 4554513 Number of axes: 6 Max. payload: 6 kg Max. working range: approx. 1100 mm Scope of delivery: robot, controller, cables, teach pendant Used item – shows normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of units, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify delivery address.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3116-2AA29 -Power: 50 Hz 7.5 kW 2920 rpm / 100 Hz 11.5 kW 5910 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 80 mm -Dimensions: 630/280/H195 mm Iedpfxovx Rp Ue Alxstk -Weight: 70 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3107-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5860 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Dimensions: 630/220/H280 mm Isdovyc Ulspfx Alxotk -Weight: 50 kg