Used Cytiva Axichrom 70/500 Chromatography Column for sale (29,175)

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series Bwsdpfxoycg Rys Aiker 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Set containing LUFT 700 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 700 COMPRESSOR REFRIGERATION AIR DRYER N10S 500L TANK Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Bjdpfx Aiorh E Erekjwr Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg Bwodpfxoza Eipe Aikor ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Includes software Includes additional software Includes a laptop for operation Includes a calibration plate Ready for immediate use Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly. Bedey Iaa Topfx Aikjwr

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Bwodpfx Aijzrwhgokor Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Bwodpeznlbysfx Aiker Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production • Workwear and uniforms • Shirts and sportswear • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: excellent (used), CATALOG NUMBER 7567 TECHNICAL SPECIFICATIONS - Automatic strip feeding - 2 pneumatic clamps - Aggregate angle adjustment - Pneumatic spindle movement - Simultaneous machining of 2 sections - Groove depth up to 25mm - Support rails - Oscillating drill movement adjustment - Feed stroke adjustment - Automatic stop - Inclination from 90 degrees (vertical) to 0 degrees (horizontal) - Main motor 1.1kW - Oscillation motor 0.75kW - Working pressure 6-8 bar - Dimensions (L/W/H) 4020x1150x1400mm - Weight approx. 480kg ADVANTAGES – For window production – Oscillation – Pneumatic clamps – Not painted – Italian made – Used machine, in very good condition Bwodpfjzkhqpjx Aiker Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may change with major fluctuations)

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Bjdpoziww Nefx Aikswr Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: excellent (used), Price quoted per unit. For sale: Karl Tränklein ZW 500 adhesive roller coating machine. This device is designed for the uniform application of adhesive to paper, cardboard, corrugated board, leather, fabrics, and other sheet materials. Thanks to its precise roller arrangement, it ensures an even layer of adhesive and high-quality results. The machine features a robust, German-made construction and adjustable pressure and adhesive application rate. It is ideal for bookbinding shops, printing plants, and packaging production. Technical specifications: Manufacturer: Karl Tränklein GmbH Model: ZW 500 Year of manufacture: 1990 Serial number: 8083 Bwjdpfx Asziwr Heiksr Working width: 500 mm Power supply: 380 V / 50 Hz Motor power: 0.25 kW Adjustable adhesive application rate Chrome-plated working roller Stable, cast iron construction Made in Germany Visual condition as shown in the pictures.

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Data : Bedpfx Aiozrvyuekowr - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: excellent (used), For sale is a Schimanek Type 70 manual bookbinding guillotine, manufactured in West Germany. This is a robust machine designed for the precise cutting of paper, cardboard, and other bookbinding materials. The device is equipped with a long cutting arm that provides high cutting force, an adjustable back gauge with a scale, and a stable worktable. The massive construction guarantees accuracy and long-term durability. Technical specifications: Manufacturer: Schimanek Model: Type 70 Serial number: 24256 Country of manufacture: West Germany Type: manual bookbinding guillotine Bodpfx Aeziwnhjikowr Maximum cutting width: approx. 700 mm Adjustable back gauge with scale Manual material clamping Robust metal construction Condition: used Applications: paper cutting, cardboard cutting, corrugated board cutting, bookbinding work, printing houses, graphic design studios. The machine is sold in the condition shown in the pictures.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Bjdpfx Aozmfxijikowr Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Model with electric book thickness adjustment. Technical specifications: Bwsdpfxjzhkkae Aikor Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up.

Condition: excellent (used), For sale is an ABUS wall-mounted jib crane equipped with an HADEF electric chain hoist, Type 63/78EF. This set is designed for lifting and moving loads in workshops, warehouses, production halls, and assembly stations. Bjdpfx Aoziqnhjikswr The robust steel construction from ABUS ensures high strength and stability during operation. The crane is equipped with an HADEF electric chain hoist controlled by a pendant control. The design is suitable for mounting on a wall or steel column. Technical data: Crane manufacturer: ABUS Kransysteme GmbH Hoist manufacturer: HADEF Hoist type: 63/78EF Crane lifting capacity: 500 kg Hoist lifting capacity: 250 kg Total jib length: 204 cm Hoist year of manufacture: 1987 Crane year of manufacture: 2002 Power supply: 220/380 V Frequency: 50 Hz Motor power: 0.3 kW Lifting speed: 5.0 m/min Protection class: IP44 Chain: 5 × 15 mm (DIN 5684-8) Pendant control CE marking Condition: Used. Functional. Shows normal signs of use in the form of scratches, paint chips, and dirt, as visible in the photos. Visual condition consistent with age and use.

Condition: used, maximum load weight: 32,750 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 13,300 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2026, KRONE SDR COOLLINER, 2,500 KG LIFT, 270 HIGH, 250 WIDE, BRAND NEW Bedezrrfyjpfx Aikjwr Body: Refrigerated First registration: APK (vehicle inspection): - FRC (certificate of conformity): Dimensions (l x w x h): 1331 x 250 x 270 cm Tare weight: 9,250 kg Payload capacity: 32,750 kg GVW (Gross Vehicle Weight): 42,000 kg Refrigeration: Carrier Vector 1550, diesel and electric Lift: 2,500 kg Dhollandia tail lift with separate batteries Platform length: 200 cm (extra long) Suspension: Air suspension Lift axles: Yes, axle 1 and 3 Axle configuration: Number of axles: 3 Axle manufacturer: SAF Brake system: Wabco Tire size: 385-55-22.5 Rear axle 1: Tread depth left outer: 100%, tread depth right outer: 100% Pirelli Rear axle 2: Tread depth left outer: 100%, tread depth right outer: 100% Pirelli Rear axle 3: Tread depth left outer: 100%, tread depth right outer: 100% Pirelli Extras: Carrier Vector 1550 refrigerator, diesel and electric, temperature range from -30 to +30 degrees, flower width, 270 cm high, 2x horizontal load-securing rails, 5x rails in the roof, aluminum floor, 2x lift axle, 2,500 kg tail lift with separate batteries, long lift platform (200 cm), dynamic ramp protection, pallet box, 9-ton SAF axles with disc brakes, 15-ton gooseneck, Krone telematics BRAND NEW KRONE TRAILERS WITH 2,500 KG LIFT READY FOR IMMEDIATE DELIVERY Further information: * Tire size | First axle: 385/55 R22.5 * Tire tread depth inside left | First axle: 100% * Tire tread depth inside right | First axle: 100% * Maximum axle load | First axle: 9,000 kg * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth inside left | Second axle: 100% * Tire tread depth inside left | Third axle: 100% * Tire tread depth inside right | Second axle: 100% * Tire tread depth inside right | Third axle: 100% * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Position | First axle: Rear * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Lift axle | Third axle: Yes Further equipment: * Rear doors * Homepage * Tail lift * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: used, maximum load weight: 32,750 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Year of construction: 2026, KRONE SDR COOLLINER 2.500 KG LIFT 270 HIGH 250 WIDE BRAND NEW Bwsdpfx Aozbf Tdoiksr Body type: Reefer First registration: APK (vehicle inspection): - FRC (certificate of roadworthiness): Dimensions (l x w x h): 1331 x 250 x 270 cm Tare weight: 9,250 kg Payload: 32,750 kg GVW (gross vehicle weight): 42,000 kg Refrigeration: Carrier Vector 1550, diesel and electric Lift: 2,500 kg Dhollandia tail lift with separate batteries Platform length: 200 cm (extra long) Suspension: Air suspension Lift axles: Yes, axle 1 and 3 Axle configuration: Number of axles: 3 Axle manufacturer: SAF Brake system: Wabco Tyre size: 385-55-22.5 Rear axle 1: Tread depth left outer: 100%, tread depth right outer: 100% Pirelli Rear axle 2: Tread depth left outer: 100%, tread depth right outer: 100% Pirelli Rear axle 3: Tread depth left outer: 100%, tread depth right outer: 100% Pirelli Extras: Carrier Vector 1550 refrigerator, diesel and electric, temperature range from -30 to +30 degrees, flower width, 270 cm high, 2x horizontal load securing rails, 5x rails in the roof, aluminum floor, 2x lift axles, 2,500 kg tail lift with separate batteries, long lift platform (200 cm), dynamic ramp protection, pallet box, 9-ton SAF axles with disc brakes, 15-ton front axle, Krone telematics BRAND NEW KRONE TRAILERS WITH 2,500 KG LIFT READY FOR IMMEDIATE DELIVERY Further information: * Tyre size | First axle: 385/55 R22.5 * Tread depth inside left | First axle: 100% * Tread depth inside right | First axle: 100% * Maximum axle load | First axle: 9,000 kg * Tyre size | Second axle: 385/55 R22.5 * Tyre size | Third axle: 385/55 R22.5 * Tread depth inside left | Second axle: 100% * Tread depth inside left | Third axle: 100% * Tread depth inside right | Second axle: 100% * Tread depth inside right | Third axle: 100% * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Position | First axle: Rear * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Lift axle | Third axle: Yes Further equipment: * Rear doors * Homepage * Tail lift * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Changes, prior sale and errors excepted.

Condition: good (used), Year of construction: 2015, functionality: fully functional, The conveyor belt from trio-technik is for sale. The following are the technical details: Length: 3500 mm Useful width: 700 mm Bedpfxozqz Sto Aikowr Blue plastic slat belt Heat resistant up to 90 degrees Celsius Height adjustable: 600 mm - 1100 mm

Condition: used, mileage: 1,93,289 km, power: 132 kW (179.47 HP), first registration: 03/2021, fuel type: diesel, overall weight: 7,200 kg, next inspection (TÜV): 05/2027, color: black, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space volume: 15 m³, loading space length: 4,780 mm, loading space width: 2,090 mm, loading space height: 1,550 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle No. for customer inquiries: 165 ----Refrigeration unit for freezer vehicles: Framec ice cream van * 2 compartments * 3+3 side doors * Rear wing doors 270° * High-voltage connection ThermoKing V500 MAX * Standby and en-route cooling * Refrigerant R452A * Suitable for deep-freezing * Mobile partition * Cargo space dimensions: L: 4,780mm W: 2,090mm H: 1,550mm * Payload: 2,170kg ----Additional features * Automatic climate control * Navigation system * Service booklet maintained * Cruise control * Driver's seat heating * LED headlights * Lane keeping assist ----Special equipment * Base color: black * Upholstery: fabric * ABS, ESP * Airbag * On-board computer * Air suspension rear axle * Particle filter * Power steering * AD Blue tank * Light sensor * Multifunction steering wheel * Radio USB / AUX / BT * Bluetooth hands-free system * Central locking with remote control * Twin tires * Electric windows * Electric, heated side mirrors * Electric immobilizer ----Technical data: * HSN/TSN: 4192/000 * 8-speed automatic transmission * Suspension: leaf spring/air * Emission class: EURO6 * Environmental badge: 4 (Green) * Wheelbase: 4,350mm * Cargo space dimensions: L: 4,780mm W: 2,090mm H: 1,550mm * Payload: 2,170kg * Tire size: 225/75 R16C ----German vehicle! 2 available * €26,850.- net plus VAT * MOT/emission test (TÜV) valid until 05/2027 * A deposit will be retained for export to third countries or the EU. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing also possible in difficult cases * This description is for general identification of the vehicle only and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute guaranteed characteristics. * We are not liable for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase * Subject to price changes, typing errors, errors and prior sale * Dear customer, please understand that due to the age and mileage, we prefer to sell the vehicle to commercial businesses or dealers. Thank you very much. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-mail: * Bsdpfx Aozp Ad Ueikjwr * Internal number: 165

Condition: good (used), 70 linear meters of shelving, Schäfer Type R7000 Used, good condition, see pictures Height: 3 m Depth: 50 cm Load capacity per shelf: 200 kg Field width: approx. 99.8 cm Negotiable price: €9,490.00 net, ex warehouse The offer includes: + 71 units of uprights or frames, 3 m, galvanized + 350 units of shelves, 200 kg load capacity per shelf, galvanized 5 levels per field (more are possible for an additional charge) Various heights up to 12 m available. The goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information upon request. We continuously have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ AVAILABLE IMMEDIATELY: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round care package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Carrying out auctions on behalf of the client. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer! Bedpfx Aieh Et Twskowr

Condition: excellent (used), Year of construction: 2006, 70 linear meters of SSI Schäfer Palflex pallet racking, including infill grating Used, in good condition, see pictures Year of manufacture: 2006 Height: 4 m Depth: 120 cm Field load: 12000 kg Frame: galvanized Beams: red Infill grating included! 2 pieces of grating per 2.7-meter beam length Negotiable price: €8,290 net ex works The offer includes: + 26 units of pre-assembled frames, depth 120 cm, height approx. 4 m + 100 units of beams, length 2.7 m, 1500 kg load capacity per bay with evenly distributed load + 200 units of safety locks + 100 units of galvanized infill grating for 50 levels, each 2.7 meters in beam length + 104 units of concrete anchors + Load capacity signs Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex works) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel construction mezzanines immediately available • 30–50 semi-trailer truckloads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) Bodpfx Ajkx E I Noikewr • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including a complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods release, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for a galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), 70 linear meters of Stow pallet racking Used, very good condition, see pictures Height 10.5 m Depth 100 cm Beam length 2.70 m Load capacity/bay 2100 kg Frame blue Beams orange Negotiable price: €13,000 net, ex warehouse Offer includes: + 26 units of pre-assembled frames, 12-tonne bay load, depth 100 cm, height 10.5 m + 300 units of beams, length 2.7 m, 2100 kg load capacity/bay + 600 units of locking devices + 104 units of concrete anchors Load capacity sign Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We continuously have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY/BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) Bwedpeiwlnpefx Aikor • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearing. 2. Commission-based auction: Conducting auctions on behalf of others. Our full service through our own employees: Cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete clearing. Whether you have become aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2009, operating hours: 69,500 h, machine/vehicle number: PR26, Used NEGRI BOSSI 700T injection molding machine - Year 2009Technical Specifications & Performance DataThis Negri Bossi injection molding machine delivers high-output performance in the 700-ton clamping class, ideal for producing technical plastic parts and PET preforms that feed downstream used bottling line and industrial packaging operations. Built in 2009, it combines robust Italian engineering with a versatile injection unit and advanced controls for demanding, continuous-duty manufacturing environments common in beverage production supply chains.Manufacturer: Negri BossiModel: VECTOR 7000 H 6500Year: 2009Working hours: 69500Clamping class: 700-ton classScrew diameter: 110 mmShot volume: 4750 cm³Shot weight: 4320 gMaximum injection pressure: 1670 barCore pulling: 4 (2 + 2)Robot interface: YesAir circuits: 4Ejection stroke: 350 mmOpening stroke: 1000 mmMould height (min–max): 400–1000 mmTie-bar spacing (H × W): 900 × 1000 mmPlaten size (H × W): 1340 × 1410 mmOverall dimensions (L × W × H): 1000 × 2340 × 2400 mmWeight: 30000 kgOption: Electric dosing motorControl system: DIMIELAdvanced Automation & Control SystemsThe machine is equipped with a DIMIEL control system featuring a clear HMI for fast setup, monitoring, and optimization. Core-pull functions (2 + 2) and multiple air circuits are programmable to support complex molds and automated sequences. The integrated robot interface enables seamless connection to handling robots for part take-out, insert loading, or downstream packing, enhancing OEE and reducing cycle time variability. Safety interlocks, guarded access zones, and centralized control help operators maintain stable, repeatable processing with quick parameter adjustments and recipe management.Production Line Integration CapabilitiesThanks to its robot interface and flexible I/O, this injection molding machine integrates smoothly into plastics manufacturing cells feeding beverage production and industrial packaging workflows. It supports inline or standalone operation and pairs well with resin dryers, loaders, mold temperature controllers, and quality inspection systems. For PET preform applications, it can be positioned upstream of stretch blow molding machines that supply PET bottles to used bottling line and second hand packaging machinery.Machine Condition & Maintenance HistoryThis unit is a second hand machine with 69500 operating hours. It is presented in working condition and ready for operation, suitable for facilities seeking reliable capacity expansion without the lead time of new equipment. The robust Negri Bossi Vector platform and the electric dosing motor option contribute to stable performance and efficient plasticizing o... Bwjdjziyzdjpfx Aiksr

Condition: ready for operation (used), Fanuc A06B-0730-B200 30P servo motor SN WN104700 + A290-0731-T500, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please enquire for price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bjdsrrqf Ropfx Aikjwr

Condition: new, Bosch DSM 04 A 2101-D, No. 1070075000-202, serial number: 001299670, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Bwedji D T Uispfx Aikjr

Condition: ready for operation (used), Bosch DSM 08 A 2101-D, No. 1070075001-201, Serial No.: 001429453, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. Bedsi D T Uqopfx Aikswr