Used Den-Jet Ce150 for sale (3,619)

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Bsdpfxeyk I U Ae Aprelh Fire monitoring

Condition: good (used), For sale is a directional jet agitator from Stelzer Rührwerke International GmbH. It is the model SM460-DF. Product data: 1455 R.p.m. 400V 18,5 kW Bledpfx Apsfr Icujreh Shaft length 720mm Blade diameter 280mm For further data see type plate (photo)

Condition: used, For sale is a directional jet agitator from VEM Motors GmbH. It is the model VDE 0530 T1/7.91. Data on the agitator: RpM: 1475 V: 380 kW: 20 shaft length: 800mm Shaft diameter: 95mm Total length: 2030mm blade diameter: 450mm Connection: DN400 Bjdpfega D Ifox Aprjlh

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Manufacturer: BACCI Model: EVO JET Type of machine: CNC Machining Center Year of manufacture: 2013 The EVOLUTION JET is an extremely flexible machining center, both in terms of adjustable dimensions and the number of worktables, onto which devices for manual, semi-automatic, or fully automatic loading and unloading can be installed. Blodpfx Apjxw Nv Hsreh Ideal for simultaneous processing of all components required for assembling chairs or furniture on a single machine. Technical data: Fully digital NC axes: 12 Linearly interpolated axes: 3 + 3 or more Rotary interpolated axes: 2 + 2 Longitudinal axis (X): 3,400 mm or more Transverse axis (Y): 1,300 mm Head transverse axis (Y): 1,000 mm Vertical axis (Z): 750 mm A-axis: unlimited C-axis: +/- 180° 5-axis spindle CNC self-adjusting worktables Special material clamping system Rack gripper OSAI machine control Electrical cabinet cooling Independent Z-axes: 2 Number of milling spindles: 4 Maximum spindle speed (rpm): 24,000 Cantilever design 2 tables Belt feed loading External transport: roller conveyor Enclosed cabin CE marking

Condition: ready for operation (used), Year of construction: 2000, PERTICI ML 139 drainage milling machine, used, in working condition Bsdpfsynwavjx Aprslh

Condition: ready for operation (used), Year of construction: 1992, Drain milling machine ROTOX 336, used machine, in working condition Bedpfx Ajynwacsprjlh

Year of construction: 2007, condition: ready for operation (used), A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible. Bledpfx Apoxxa T Soroh

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer Bledpfx Aou Afu Rjprsh 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Year of construction: 2006, condition: ready for operation (used), A CNC dual-head waterjet cutting system Bystronic is available. Working dimensions X/Y/Z: 4000mm/2250mm/230mm, cutting heads: 2, max. cutting carriage distance: 1150mm, simultaneous movement: 84m/min, machine tolerance: +/-0.1mm, repeatability: +/-0.05mm, max. frame load capacity: 7000kg, max. workpiece weight: 6300kg, max. round part diameter and length: 440mm/3700mm, max. operating pressure: 3800bar. Machine dimensions X/Y/Z: approx. 9000mm/7550mm/2050mm, weight: approx. 10000kg, operating hours: approx. 41130h, cutting hours head 1/head 2: 13720h/956h. The second head was removed and the cutting unit was mounted on head 1 as a spare part. However, after procurement of a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. Including a desalination system and all spare parts. Documentation available. An on-site inspection is possible. Bljdpfx Ajywy Rdsprjh

Year of construction: 2005, condition: used, Solo feeders Built in 2005 Equipment Bedpfx Aec Inicoprolh double opener

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,932 mm, total width: 2,020 mm, total height: 2,460 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: #559 Mercedes Benz Sprinter 417 CDI downgraded to 3.5t with Rockstroh Drain Jet 100-1 High-Pressure Flushing Unit Installation: * Rockstroh Drain Jet 100-1 * Power take-off from the Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/min at 210 bar (38KW) * Pressure control and safety valve * Hydraulic HD hose reel for approx. 80m DN16 * Filling hose reel with approx. 40m DN20 * Approx. 1,000 liter water tank Bledpfxsyxvaqj Aprjh * Low water protection system * Electric filling system and overflow protection * Electronic speed control * Bypass system * Remote radio control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lamps * Various storage options * Waterproof plastic floor coating with non-slip surface Special equipment: Second battery (auxiliary battery) in cabin, 3-button remote for central locking, acoustic package, 13-pin trailer socket, DAB tuner (digital radio reception), entry grab handle on right rear pillar, Chassis: Stability Level II, electric parking brake, all-weather floor mats, vehicle without lashing eyes, 250 A alternator, transmission lock for power take-off, front cup holder, rear door (opens to 270 degrees), terminal strip for electrical connections (under driver’s seat box), instrument cluster with color display, cable duct at rear portal, cable duct on side wall, side marker lights, multimedia system MBUX (10.25” touchscreen with navigation), Power take-off 2 B with intermediate shaft, configurable special module, crossmember with integrated step, reversing camera, wipers with rain sensor, fuel sensor for auxiliary heating, isolation relay for additional battery, fleece battery 92 Ah, reinforced front axle, pre-installation for transmission oil cooling, closing aid sliding door right Other features: Third brake light, overhead storage above windscreen, under-dashboard storage on passenger side, adaptive brake light, driver’s airbag, traction control (ASR), washer fluid level display, electrically adjustable and heated wing mirrors, outside temperature display, automatic light activation, entry grab handle for sliding door at partition, electronic brake-force distribution (EBV), Assistance systems: Active Brake Assist, Crosswind Assist, Lane Keeping Assist, digital tachograph, 90 km/h speed limiter, body type: van, Keyless Start, child lock, communications module (LTE) for digital services, fuel tank: main tank 71 liters, continuous cargo partition, steering wheel (mechanically adjustable), headlamp leveling, Mercedes-Benz emergency call system, engine 2.0 L - 125 kW CDI CAT, wheelbase 3,665 mm, low-emission according to Euro 6d-TEMP, right side sliding door to load/passenger area, SCR system (AdBlue technology), seatbelt system with warning (passenger side), seatbelt system with warning (driver side), seat upholstery: fabric, driver’s cab seats: adjustable passenger seat, driver’s cab seats: adjustable driver’s seat, engine start/stop system, maintenance interval display (Assyst), heat insulating glass (windscreen with top filter strip), For further details and/or pictures, please contact us directly. A large selection of other vehicles for BUYING or RENTING can be found at:

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. Bledpfeytp U Aox Aprsh RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger)

Year of construction: 2014, operating hours: 10,083 h, condition: used, functionality: limited functionality, We are selling a water jet from the Czech manufacturer PTV. It has been non-functional for 4 years now. Surplus stock. Bledpfxjxnm R Nj Aproh

Condition: good (used), Top-maintained Falch Trail Jet 15 500 bar 1790 hrs Year 2019 Purchased from Falch Hot water Service maintained by Falch Various accessories optional Bjdpeuvd N Sjfx Aprslh

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Bledpfx Aewz Scaspreh

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Bodpjygmhtjfx Aprelh

Year of construction: 2007, condition: ready for operation (used), Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible. Bljdsyttwuopfx Aprsh

Condition: used, Two Ystral jet stream agitators are for sale Blsdpfx Apsga D I Uersh Data on the agitator: RpM: 1465 V: 230 / 400 kW: 11 shaft length: 560mm Total length: 1220mm Blade diameter: 360mm For more information see data sheet

Condition: new, Year of construction: 2026, Brand new system from one of the world's largest manufacturers, Dardi International / Flying Bridge design, 4x2 m cutting area, 2-D, linear guides with ball screws on all three axes, Yaskawa motors with controllers. Delivery time approx. 6-8 weeks, directly available in our showroom in Elsenfeld with the following configuration: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control WIN 11 - IGEMS 2-D CAD/CAM programming system incl. automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotating joint - Automatic central lubrication - High-pressure supply via base profile and shut-off valve Bjdox Ig Siepfx Aprjlh - Allfi® abrasive feed system 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, pneumatic-free and continuously adjustable - KEYENCE light barriers for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high pressure pump - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional manual swivel head available at extra cost – see pictures.

Condition: new, color: orange, driver cabin: other, gearing type: other, loading space volume: 10 m³, loading space length: 5,250 mm, loading space width: 2,300 mm, loading space height: 950 mm, Vehicle location: Bovenden, steel superstructure, jet drop sides Bjdpfevhg Rgsx Aprjlh Body: Meiller steel body approx. 10.5m³ Dismantling from MAN 33.440 TGS 6x6 - 73453 - with wheelbase 3900mm, roof protection, ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system Bedpfx Apeyclvnerolh - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5470x1100x2500 mm Bjdpsvz E Nhofx Aprjlh Weight 1100 kg Total power requirement 11 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3480x1100x2500 mm Weight 900 kg Total power requirement 5,5 kw Bljdpfx Apjvz Hc Asrsh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4590x1100x2500 mm Weight 1000 kg Bedpfsvz E Iqex Aprolh Total power requirement 7,5 kw

Condition: new, Year of construction: 2014, I sell the Hot Air drying tunnel BURKLE Modell: Easy Dry JET 1300 Filter: TRDUE / 700 m3/hr. Ventilator 7,5kW / 6800m3/hr. / 35 m/s Working width: 1400mm Total length: 6,00m Elektric connection 36,5kW Heating system 12 blowing units Heating medium water up to 80°C Max. Heating power 45 kW Max. Temperature of heated surfaces 120°C Siemens Simatic Touch control panel Year 2014. Machine NEW, not used before ! Available immeditely. Bodper Arrwjfx Aprjlh