Used Drill Bit Set, 37 Pieces for sale (24,040)

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Lredpfozdazhjx An Iep Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function Lsdpfszina Ijx An Isrp GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, functionality: fully functional, Year of construction: 2025, NEW! Professional quality with reinforced 4-square shank. Hydraulic earth auger set Ø150/200/300 mm ❗ ONLY €899 ❗ Warehouse clearance – available immediately! ⭐ NEW – unused – ready for immediate use! Ledpsylk Nrefx An Isrp ⭐ Complete set including 3 augers + motor + extension ⭐ OPEN-S mount – flexible & universally adaptable ⭐ Significantly below market price! ❗ Reinforced design: All augers feature a robust 4-square shank. This ensures maximum power transmission, high stability, and significantly increased resistance to twisting and stress. ⭐ SCOPE OF DELIVERY: ✔ 3 drilling diameters (150 / 200 / 300 mm) ✔ Hydraulic motor ✔ Hydraulic hoses ✔ OPEN-S mount Everything new. Everything included. No need for additional purchases. ⭐ Advantages of the OPEN-S mount ✔ Universally adaptable ✔ Ideal for workshop conversions ✔ Perfect for export ✔ Quickly adaptable to various machines ✔ Saves expensive quick-change adapters The open mount offers maximum flexibility during assembly and is ideal for individual adaptations to various excavators and mini-excavators. ⭐Depending on the model, suitable for mini-excavators between 1.8 t and 2.5 t. The difference lies in the pin diameters and distances. Please specify the machine type or pin dimensions when requesting information. ⭐Perfectly suited for: ✔ Fence construction ✔ Foundation work ✔ Screw foundations ✔ Planting holes ✔ Garden and landscape construction ✔ Construction and agricultural projects Shipping and collection possible – warehouse in Rheda-Wiedenbrück Contact us at any time – quick response!

Condition: excellent (used), Bezel (28388) SPH 360 mm Weight 37 kg Dimensions, see drawing Lrodpfxomkfd So An Iep

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 + multiradius scrapers servomotorical adjustable Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 25m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Lodpfx Asxnb Uvon Isrp Very good condition, fully working!

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2280, year 2015: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Ledpsxnbx Ijfx An Iorp Corner rounding 4-motor manual adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment manual driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 20m/min. Total length including feeding plate 9365mm Kilometerstatus 2.926.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Lsdpfx Aneyt Spco Iorp

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Multivac 19.200.1240.95 Lsdpowth Uiefx An Isrp 6x11cmx18cm tray size. Price: 2000 eur the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: new, functionality: fully functional, Year of construction: 2024, This powerful, hydraulic pile rammer from Maruzen is a good choice if you are looking for a strong machine for striking steel and wooden piles. The Maruzen KH193 comes standard without impact piece. Easy and fast to use As many as 1920 blows per minute Operates on hydraulic power source such as a power pack or earth mover Can be used in wet conditions, even underwater Minimal service required; lubricate head every 50 hours and service every 500 hours. Hydraulic powerhouse The KH193 pile rammer is a perfect choice when ramming steel pipes, for example 60 x 40 mm or ø 60 mm, but it is also suitable for wooden piles up to a diameter of 110 mm. It weighs 20 kg and is more powerful than our gasoline rammers. This type of pole rammer offers many possibilities: Maruzen's hydraulic powerpack is intended for mobile purposes and is known for its easy way to use. This powerpack UH070 is matched with the AY01H horizontal auger, the OH01 hydraulic one-man auger and the KH193 pile rammer from Maruzen. This type of powerpack offers many possibilities in: Assembly Fencing Foundation work Guardrail/boarding work Installing solar parks This hydraulic power pack is powered by a Honda GX200 gasoline engine and is delivered fully assembled, on a metal frame with large wheels. Benefits: Low fuel consumption; 1.6 Liters per hour at full power 20-25 Liters per minute Lrjdortqydjpfx An Iop Low noise level Light weight (40 Kg) Honda GX200 4 stroke engine (low emission) Very easy to use. EuroGate International offers affordable quality and service Maruzen is a reliable machine builder from Japan, for all kinds of hydraulic tools. The top brand offers excellent quality and service. Maruzen has been producing hydraulic machines since 1954.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Lrodpfxozkt A Rj An Isp Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Motor power: 0.75 HP Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade in the X direction

Condition: good (used), Nagel Citoborma 290AB Paper Drill The machine is 100% functional and ready to use. Robust construction – weighs 200 kg. This is the current Citoborma drill model in production. 400V power supply. Two drilling heads with adjustable spacing ranging from 45-170 mm. Drill diameter: 2-20 mm. Stack height: 60 mm. Controlled by an electric foot pedal. Waste is directed to an external sleeve. The drill table is adjustable in every direction (sides, front/back) and has stops for setting the drill spacing (non-standard drilling). Additionally, a special module for standard spacings is installed in the table. Furthermore, the table has two movable margins. Ledpozmu E Esfx An Iorp The drill has an automatically released table lock after each cycle, allowing the table to be moved to the next position. The set includes drills, tools and instructions.

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. Lrsdpjzmu Ersfx An Iep The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Nagel Citoborma 490 Paper Drill Lrsdpfjzmu Efox An Iop This is the largest Citoborma drill currently in production. Very good condition, ready for production. The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Maximum stack height: 60 mm Drill bit size: 2-10 mm Adjustable spacing: 45 – 425 mm Two drilling speeds 380V power supply Weight: 365 kg Made in Germany.

Condition: used, functionality: fully functional, mount diameter: 10 mm, spindle speed (min.): 6,000 rpm, spindle speed (max.): 12,000 rpm, table length: 1,130 mm, table width: 250 mm, – Italian production TECHNICAL SPECIFICATIONS: - Number of spindles: 8 Lsdpfx Ajx Npimjn Isrp - Number of units: 4 - Unit motor power: 4 x 1 kW - Adjustable angle of end units: 0° - 20° - Mechanical oscillation - Oscillation motor power: 0.37 kW - Max. oscillation length: 100 mm - Oscillation speed adjustment - Independent unit oscillation - Basket diameter: 10 mm - Distance between outermost spindles: 1170 mm - Min. distance between units: 84 mm - Spindle speed: 6000 / 12000 RPM - Unit height adjustment - Unit width adjustment - Table dimensions: 1130 mm x 250 mm - Table height and depth adjustment - Three pneumatic clamps - Inverter power: 4 kW - Connector diameter: 2 x 100 mm - Machine dimensions (L/W/H): 235 / 165 / 200 cm - Weight: ~ 1750 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa Lredpfjq Ii Dlex An Ijp overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Weight 264kg Lsdpfozmnikox An Ijrp Power supply 230V + compressed air.

Condition: good (used), Manufacturer: MAS Type: VR 4 Reach: 1000mm Lodsh Eigbopfx An Ijrp Without table!

Condition: good (used), 12-head drilling machine for sale, Table size: 400 x 360 mm Lredepy D Dwspfx An Ijp

Condition: good (used), Outreach: 915 mm Taper: MK3 Length: 1700 mm Width: 1,000 mm Lredpfod Ixy Iox An Iop Height: 2000 mm Weight: 1000 kg

Condition: used, Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, fuel type: gas, power: 2,028 kW (2,757.31 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Complete set of 3 x MTU 16V4000 GS (16V4000L64) with Skid cooling groups Radiators Absorption chiller Genset outgoing breakers Lube oil systems Electrical auixiliaries panels MTU - MCS , MTU - MMC panels =Technical specifications= Time for delivery - in stock Engine type - 20V4000L64 Electrical power - 2028 kW Engine speed - 1500 rpm Total efficiency - 89 % Voltage - 400 V Frequency - 50 Hz Lsdpfx Aszmnzasn Isrp =Other information= Production country - Germany

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Working Table: Pod and Rail Lsdpfx Ajznuxben Iorp Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: new, Holzprofi Maker Special Column Drill M1-BM4117S-Variotouch with Stepless Speed The brushless motor is directly controlled without a belt drive! It features an electronic control system with a combined chip and software control system. It features a touchscreen display, thread cutting device, automatic start and stop function when the spindle is operated, forward/reverse rotation, LED light, and cross-line laser. With extra robust table - also suitable for vices. Technical data: Motor power 1.6 kW (= 2 kW S6) Motor voltage 230 volts Quill taper MT 3 Quill stroke 120 mm Drill chuck 3-16 mm Speeds 150-3200 rpm Column diameter 80 mm Table dimensions 345 x 345 mm Base dimensions 520 x 320 mm Table tilt 90° left/right Lsdpfxox H Ukko An Ierp

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Lrodsza Syuepfx An Iop Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Spanien 50410 € 952.75 € 35 mm MK 4 390 mm 94- 2.225 (16) 50 Hz 113 U/min M35 1660 mm 1510 mm 2600 mm 910 kg 180 mm 190 - 650 mm 1310 mm 125 mm 400 x 420 mm 0,10 - 0,18 - 0,24 (3) mm/min 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard Ledpfxoynmtxs An Iorp OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Ledpfx Ajznvibsn Isrp Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Thread cutting (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm 23726