Used Engler Bottle Unscrambler for sale (1,339)

Condition: used, Year of construction: 2008, Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data:  - manufacturer: ENOS, Italy - model: Eticap - year of manufacture: 2008 - labelling Heads: 2 (wet-glue heads) - Head 1: front and neck labels - Head 2: back labels - operation Direction: Left to right - production Capacity: 4.000/h - adjusted for: cylindrical glass bottles - 0,7 L = Ø75mm - 1,0 L = Ø86mm - condition: Stored off-line since 2020, machine in a good condition - actual label sizes:  - front label: 131mm height, 77mm width - back label: 114mm height, 66mm width Lredpfx Aksy Scb Ijmou

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm Lodpfeyrhppox Akmsru New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: used, Year of construction: 2005, Overview This Robino & Galandrino SUPERBLOC F 8 is a capsuling monobloc for wine bottles, built in 2005. It combines a capsule distributor with a rotary turret of spring-loaded spinning heads, so capsules are placed on the bottle neck and finished in one compact machine. The machine is rated at 12,000 bottles per hour. It sits in a stainless steel frame with full transparent guarding and can be visited at the current site by appointment. Technical data - Manufacturer: Robino & Galandrino - Model: SUPERBLOC F 8 - Year of manufacture: 2005 - Machine type: capsuling monobloc (capsule distributor + rotary spinning turret) - Capacity: 12,000 bottles per hour - Container: wine bottles - CE marked Equipment - Capsule distributor with capsule magazine and pneumatic transfer - Rotary turret with spring-loaded spinning heads - Bottle infeed screw, star wheels and guide rails - Control panel with display, selector switches and emergency stop - Stainless steel frame with transparent safety doors - Format parts (infeed screw, star wheels) on a transport trolley Condition Lodpfxsz Rvrms Akmsru Used machine, can be inspected on site by appointment. Availability Available immediately. Location: France. Sold EXW; dismantling and truck loading are not included.

Condition: used, Year of construction: 2011, machine/vehicle number: M337, Used RAVECCO MORAVEC filling triblock 12-12-1C for waterTechnical Specifications & Performance DataThis second hand Filling Monoblock by Raveco Moravec combines rinsing, filling, and capping in a compact rotary platform designed for efficient beverage production and industrial packaging. Engineered for glass bottles, it is a reliable choice for a used bottling line seeking flexible closure options and straightforward integration.Manufacturer: Raveco MoravecModel: 12-12-1C MonoblockSpeed: 2.500 BPH ( Bottle per hour)Configuration: 12 rinsing grippers, 12 filling valves, 1 capping headContainer types: Glass bottlesBottle formats: Compatible with 0.33L, 0.5L, 0.75L, 1.0L bottle formatsNeck finish: Long neckClosures: crown capsConstruction year range: 2009–2011Machine type: Rinser–Filler–Capper monoblockAdvanced Automation & Control SystemsThe machine utilizes a Moravec control platform with manual operation, providing straightforward and dependable control for operators. Core functions for rinsing, filling, and capping are synchronized within the monoblock to maintain consistent bottle handling and process timing. Operator access is designed for quick intervention and basic parameter adjustments, supporting reliable changeovers between closure types.Moravec control system with manual operationSynchronized monoblock timing for rinse–fill–cap sequenceOperator-friendly controls for format adjustmentsStandard emergency stop and interlocked guarding typical of industrial packaging machineryProduction Line Integration CapabilitiesThis Filling Monoblock is configured for a straight-line conveyor layout, enabling smooth integration within a used bottling line or operation as a standalone module. It accepts a range of glass bottle formats and supports quick format and closure changeovers, making it suitable for flexible beverage production environments.Inline integration on straight conveyor layoutsStandalone or in-line operation within broader bottling equipmentFormat flexibility from 0.33L to 1.0L glass bottlesChangeover capability crown closuresMachine Condition & Maintenance HistoryThe equipment is currently in occasional operation and has been in service approximately 25 hours per week during recent use, with remaining time on standby. It has been serviced regularly over the past year of ownership. Testing is available, including both dry run and production tests, to verify operational performance before integration into a second hand production line.Operational status: Occasional operationTesting availability: Dry run and production test possibleService status: Regularly serviced during recent useDocumentation: Technical manuals and schematics not on handSpare parts: Not includedOperational Performance & VersatilityDesigned for glass bottles with a long-neck fi... Lodpfxey Uvhmo Akmsru

Condition: used, Year of construction: 2002, machine/vehicle number: CA83, Used ROBINO & GALANDRINO monostadio z 8 t capsuling machine- Year 2002Technical Specifications & Performance DataThis Single-stage Capsuling Machine Z 8 T by Robino & Galandrino is a robust solution for capsule application on glass bottles, engineered for wine and sparkling wine producers seeking reliable performance in a second hand, used bottling line environment. Built with Italian precision, it offers consistent capsuling quality and seamless integration into industrial packaging and beverage production workflows.Manufacturer: Robino & GalandrinoModel: Z 8 T (Monostadio)Year: 2002Configuration: Single-stage capsulingNo. of heads: 8Capsule types: PVC shrinkable plastic; Champagne/sparkling wineRotation direction: CounterclockwiseOptical centering: Not equippedContainers: Glass bottlesCompliance: CE markedAdvanced Automation & Control SystemsDesigned for dependable operation within professional bottling equipment setups, this capsuling machine supports stable, repeatable processes. Its single-stage architecture simplifies adjustments and minimizes changeover time. Operator functions are straightforward, ensuring efficient routine operations. Standard machine protections and CE conformity support safe use on modern production floors.Streamlined controls for routine start/stop and adjustmentsQuick changeovers aligned with single-stage designMechanical alignment without optical centering for robust, low-maintenance operationSafety guarding consistent with CE conformityProduction Line Integration CapabilitiesThe Z 8 T integrates easily as a standalone station or inline within a complete used bottling line. It accepts upstream glass bottle handling and passes consistently capped bottles downstream to labeling or inspection modules, supporting flexible industrial packaging layouts.Inline or standalone operationCompatible with standard glass wine bottle handling conveyorsSuitable for integration after corking/capping and before labelingCapsule application for both PVC shrink and sparkling wine formatsMachine Condition & Maintenance HistoryThis machine is currently in storage, making it available for rapid deployment into beverage production environments after routine commissioning. The overall configuration, CE conformity, and preserved components provide a solid foundation for reliable second hand operation.Current status: In storageCE marked unitSingle-stage, 8-head layout preservedOperational Performance & VersatilityOptimized for wine sector applications, the Z 8 T manages both PVC shrink capsules and champagne/sparkling wine formats. Its counterclockwise carousel and 8-head configuration deliver balanced throughput for small to mid-scale wineries and beverage producers.Ideal for Wine and sparkling wine productionConsistent application of PVC sh... Lrjdpfx Akoz E Dhwjmsu

Condition: used, Year of construction: 2001, machine/vehicle number: LC651, Used KRONES filling line for Vodka - glass 6000 BPH - Year 2001Technical Specifications & Performance DataThis complete glass bottling line, engineered around Krones equipment, is optimized for still strong spirits in non-returnable glass bottles. Configured with a dedicated rinser, a vacuum filling monoblock, a dual-carousel cold-glue labeling and tax-stamp system, and tray-plus-film secondary packaging, it delivers consistent performance for premium spirits presentation.Year: 2001Nominal speed: 6,000 bph on 0.7L formatContainers: Non-returnable Glass bottles; shapes handled: round, flask, shtoffFormats supported: 0.2L, 0.25L, 0.37L, 0.375L, 0.5L, 0.7L, 0.75LRinser: Krones Varioject 1440-24-188; rotary, 24 nozzles; single-channel; fixed nozzles; pre-treated water; gravity draining; no air blowFiller-Capper: Krones Vacufill 960-024-124-V; vacuum filling for still spirits; 24 filling valves; capper with 4 headsClosures: ROPP aluminum and Guala non-refillableLabeler: Krones Prontomatic / Taxomat 720-9-3-180 TA; cold glue; pre-cut paper labels; U-shape tax stamp 160 x 20 mmPacker: MEYPACK VP410; tray + filmConveyors: Krones Synco S bottle conveyors; Krones pack conveyorsControls: Siemens S7 PLC; electrical cabinets includedAdvanced Automation & Control SystemsThe line integrates centralized automation using a Siemens S7 PLC for reliable sequencing of rinsing, vacuum filling, labeling, and packaging. Electrical cabinets are included, supporting line interlocks, safety circuits, and device control. The rotary platforms and mechanical cam systems in the labeling/tax-stamping station ensure repeatable precision at rated speeds, while format-specific change parts support quick, accurate format transitions.PLC/HMI: Siemens S7 PLCControl architecture: Centralized line control with machine-to-machine interlocksSafety: Emergency-stop circuits and guarding typical of Krones rotary equipmentChangeover: Format parts for multiple glass shapes and volumesProduction Line Integration CapabilitiesDesigned for cohesive in-line operation, this used bottling line connects rinsing, vacuum filling, cold-glue labeling with tax stamping, and tray-plus-film packaging via Krones conveyor systems. It is ideal for second hand industrial packaging upgrades in beverage production focused on spirits in glass bottles. The broad format coverage supports brand portfolios requiring flask and shtoff bottles across multiple sizes.Machine typeManufacturer / ModelYearVarious EquipmentKrones Synco S (Conveyors) Lredpfx Ajz E Di Uskmeu

Condition: used, machine/vehicle number: TP121, Used AROL 8 head capping machine - 16000 BPHTechnical Specifications & Performance DataThis rotary capping machine is engineered for high-efficiency closure application on PET bottles across beverage and food sectors. Manufactured by Arol, it features an 8-head rotary configuration designed to deliver stable throughput and precise cap application at industrial speeds. Its compact footprint and ergonomic working height support streamlined operation within modern bottling equipment layouts and industrial packaging environments.Manufacturer: ArolMachine type: Rotary Capping MachineModel: 8 testeNo. of capping heads: 8Maximum speed: up to 16,000 bphContainer material: PETNeck/closure specification: 38 mm threadRotation direction: CounterclockwiseTransfer type: Body handlingMaximum bottle height: 320 mmWorking table height (H): 1200 mmElectrical supply: 400 V, 3 PH, 50 HzAdvanced Automation & Control SystemsBuilt for consistency and reliability, this rotary capper supports precise application of 38 mm plastic screw closures on PET containers. The 8-head turret ensures uniform torque distribution and repeatable performance across sustained production runs. The electrical configuration (400 V, 3-phase, 50 Hz) aligns with common industrial power standards, facilitating straightforward integration with existing control panels and line PLCs. Quick format adjustments and operator-friendly settings help reduce changeover times and improve uptime in beverage production and industrial packaging operations.Production Line Integration CapabilitiesThe machine integrates seamlessly into a used bottling line or a new installation as a standalone capper. Counterclockwise rotation and body-handling transfer allow smooth infeed/outfeed with standard conveyors. A cap elevator is available as a separate option to automate cap feeding and maintain continuous operation. Bottle handling supports PET formats within a height range up to 320 mm, enabling multi-product flexibility across water, soft drinks, wine, beer, milk, and oil lines.Machine Condition & Maintenance HistoryThe unit is ready for operation. It has been overhauled and is offered with a 6-month warranty. Supplied with compatible spare parts, it is presented in ready-to-use condition and available on an “as seen and approved” basis—ideal for facilities seeking a dependable second hand capper with minimized commissioning time.Operational Performance & VersatilityDesigned for PET containers with a 38 mm threaded neck, this rotary capper suits a wide scope of beverage and food applications. It is an excellent fit for water (still and sparkling), soft drinks (CSD), wine, beer, milk, and edible oil. The 8-head configuration balances speed and gentle handling, maintaining product integrity and closure quality at up to 16,000 bottles per hour. Its industrial-grade build and precise head motion support consistent sealing performance within demanding production schedules.Installation Re... Lrsdpfx Asz E Dkrokmou

Condition: used, Year of construction: 2019, machine/vehicle number: LC681, Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate heat exchanger, 2,000 L/hCellar output: approximately 700–800 hl/year with the installed fermentation capacityAdvanced Automation & Control SystemsThe brewhouse is equipped with a digital control panel featuring recipe programming, with capacity for 15 stored recipes, brewing-temperature display and control, and management of the wort pump and lauter rake. Individual temperature controllers on the fermenters support controlled glycol cooling across cone and shell zones.The semi-automatic OMB labeling machine uses an electric drive, label photocell and micrometric adjustments for accurate front and back label application on round bottles. The bottling section includes quick couplings and supply hoses, while the pneumatic AIR-MATIC crown capper requires compressed air for operation.Power supply: 380–400 V, three-phaseOMB labeling machine: 230 VMalt mill motor: 1.5 kWGlycol operation down to -5 °CProduction Line Integration CapabilitiesThis used bottling line forms part of a complete brewing and beverage production plant. The process moves from malt milling and wort production through cooling and fermentation, followed by priming, gravity filling, labeling, crown capping and cold-room bottle conditioning. It is suited to craft beer operations requiring a compact, coordinated production line with packaging machinery for glass bottles.Machine typeManufacturer / modelYearVarious EquipmentBBC INOX Essential 1000 Brewhouse2019ChillerMonobloc glycol chillerFilling MachineLinear gravity bottle filler... Lredpfx Akez E Dfcjmsu

Condition: used, Year of construction: 2013, machine/vehicle number: TP129, Used AROL speciale kamma PKV capping machine 10000 BPHTechnical Specifications & Performance DataThis Arol rotary capping machine is designed for automated bottle closure in a used bottling line. The Speciale Kamma PKV model combines rotary operation with neck-grip transfer, providing controlled bottle handling through the capping process. It is configured with five capping heads and a maximum speed of 10000, supporting efficient industrial packaging operations where consistent closure application is required.Manufacturer: ArolModel: Speciale Kamma PKVYear of construction: 2013Capping heads: 5Maximum speed: 10000Machine configuration: RotaryBottle transfer: Neck-grip transferWorking-table height: 1200 mmAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for coordinated operation of the rotary capping cycle. Clockwise working direction is specified. Electrical supply is 400V, 3 Ph+N +T, with a 20 A electrical rating. This configuration is suited to integration into an industrial bottling line with compatible electrical and control infrastructure.Electrical supply: 400V 3 Ph+N +TElectrical rating: 20 APLC: SiemensRotation direction: ClockwiseProduction Line Integration CapabilitiesThe rotary capper can be positioned downstream of filling equipment and upstream of inspection, labeling, or secondary packaging machinery. Neck-grip transfer supports stable bottle movement at the closure station, while the included cap elevator provides automatic cap feeding to reduce manual handling. The machine is suitable for integration with conveying systems used in beverage production and broader industrial packaging applications.For bottle-based applications, capping machinery of this type can support PET and glass container handling when the bottle neck, cap format, and transfer interfaces are compatible with the installed configuration.Machine Condition & Maintenance HistoryThis second hand Arol capping machine is ready for use. It has been refurbished and is supplied with compatible spare parts. A 6-month warranty is included. The machine is offered as inspected and accepted, making it suitable for buyers seeking a prepared capping unit for a used bottling line or production-line upgrade.Operational Performance & VersatilityThe machine is specified for natural water, sparkling water, soft drinks, milk, oil, beer, wine, alcoholic beverages, and preserves. Its rotary design and automatic cap elevator make it relevant to beverage production and food-packaging environments requiring repeatable bottle closure operations. Final suitability depends on verification of the required cap type, cap dimensions, neck finish, bottle geometry, and line speed.Installation Requirements & Site PreparationInstallation requires a 400V 3 Ph+N +T electrical connection and a compressed-air supply at 6 bar. The working-table height is 1200 mm and should be considered when aligning infeed and dis... Lrodpfxjz E Dgts Akmeu

Condition: used, Year of construction: 2010, machine/vehicle number: ET179, Used Sacmi Labeling Machine Opera year 2010 overhauled in 2025 Model: Opera 400 (2010) • Speed: 45,000 Bottles/hour • Status: ready for operation • Formats: 500 ml, 1 L, 1.5 L. Reconditioned OPP roll-fed labeler, overhauled in 2025. This overhauled labeling machine delivers stable high-speed performance for multi-format lines and qualifies as robust bottle labeling equipment for continuous production. Performance and Specifications: The Opera 400 maintains consistent output at 45,000 BPH with quick format changes across 500 ml, 1 L, 1.5 L. Two labeling stations support continuous operation, with automatic label adjustments and manual head adjustment to keep tolerances steady at speed. This is a reconditioned OPP labeling machine. Work performed during the 2025 overhaul: The jacks The plates The glue roller were overhauled The roller motor was replaced New safety guards were installed The printheads were overhauled All glue heating unit probes were replaced The suction unit hoses were replaced, and the entire electrical system was inspected Components and Functionality: Equipped with 25 plates, the Opera 400 uses a mechanical cam brake/clutch for plate movement to maintain precise synchronization at full speed. The label feed is roll-fed (coil). With 2 labeling stations, the machine supports continuous application while minimizing downtime. No. of plates25 Rotation direction0 Plate movement1 (mechanical cam brake/clutch) Number of stations2 Ljdpfsz E Dl Ajx Akmjru Labeling method7 Label placement5 Optical centering system0 Head adjustment1 (manual) Optimization and Maintenance of Used Sacmi Labeling Machine: Manual head adjustment gives technicians direct control for fine-tuning, while automatic label adjustments reduce operator intervention during run. The 2025 refurbishment addressed wear parts and safety elements, supporting reliable uptime typical of bottle labeling equipment in high-throughput environments. Conclusion: Sacmi Opera 400 (2010), overhauled in 2025, combines 45,000 BPH throughput, roll-fed OPP application, 25 plates, and 2 stations with multi-format capability (500 ml, 1 L, 1.5 L). Ready for operation.

Condition: used, Year of construction: 1999, machine/vehicle number: LC693, Used KRONES Sensometic VP-G filling line 12000 BPH for fruit syrup - Year 1999Technical Specifications & Performance DataThis KRONES complete bottling line is configured for filling raspberry syrup, various fruit syrups and special citrus vinegar at a filling temperature of 25 °C. Built in 1999, the line handles glass bottles and PET bottles in three documented formats, combining rinsing, filling, dual capping and cold-glue labeling within an integrated industrial packaging process.Maximum production speed: 12,000 bph with 0.7L glass bottlesProduction speed: 10,000 bph with 1.0L glass bottlesProduction speed: 6,000 bph with 1.5L PET bottlesCompatible formats: 0.7L glass, 1.0L glass and 1.5L PET bottlesElectrical supply: 240/400 V, 50 HzLine direction: left to rightAdvanced Automation & Control SystemsThe bottling equipment is controlled by a Siemens S5 115 U PLC. Electronic valve control is fitted to the three-channel KRONES Variojet rinser, while motorized height adjustment is provided on the filler upper section and on both capping stations. The labeling machine incorporates a horizontal, single-line laser dater for in-line coding.The Prontomatic labeling machine has a full protective enclosure and a lift-up monoblock design, supporting protected operation and access during routine line activities.Production Line Integration CapabilitiesDesigned as a complete used bottling line, this KRONES configuration integrates bottle rinsing, filling, screw capping, snap-on capping and multi-position labeling. Standard feeding, right-angle labeler infeed and transfer-screw container handling support continuous bottle movement through the labeling section. The line is suitable for industrial packaging applications involving syrup and vinegar products in glass and PET containers.Machine typeManufacturer / modelYearRinsing MachineKRONES Variojet 2.520-070-1131999Filling MachineKRONES Sensometic VP-G 050-113/SV 10/SOV 10-S1999Capping MachineAlcoa PP 10 / 360Capping MachineAlcoa K 10 / 360Labeling MachineKRONES Prontomatic 720-12-6-4-1801999PrinterLaser daterMachine Condition & Maintenance HistoryThe line is availa... Lrodpfx Akj Adtqxsmou

Condition: used, Year of construction: 2008, operating hours: 2,467 h, machine/vehicle number: LC690, Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed power: 120 kW.Required hall surface: approximately 500 m².Advanced Automation & Control SystemsThe PET bottle blow molding section uses infrared preform heating with 8 segments, 14 lamps and 550 mm heating elements. The SMF COMBI 400 machines operate with a 400 V, 3-phase, 50 Hz supply and have an installed power of 56 kW per machine. The labeling machine operates at 400 V, 50 Hz and is rated at 28 kW and 47 A.The AMER filling monoblock integrates rinsing, filling and capping in a compact process block. It is equipped with a HEPA filter and an integrated CIP aggregate with disinfection, supporting hygienic beverage production and efficient internal cleaning procedures.Production Line Integration CapabilitiesThis complete bottling line is designed as an integrated PET packaging solution for still water production. Preforms are handled by the SMF hopper and supplied to the blow molding machines, while air conveying transfers formed PET bottles toward the filling section. After rinsing, filling and capping, bottles are labeled with OPP foil and transferred to the shrink wrapper for pack formation.Machine typeManufacturer / modelYearBlow Molding MachineSMF Maschinenfabrik GmbH / COMBI 4002009ChillerSMF Maschinenfabrik GmbH / HT-6A2008Filling MonoblockAMER / BLOCK2008Labeling MachineSACMI LABELLING / OPERA 200 RF2008Shrink Wrapper Lodpfe Adtttox Akmoru

Year of construction: 2006, condition: used, machine/vehicle number: AT99, Used Vitone V5 decanter for oil - 90ql MalaxeTechnical Specifications & Performance DataThis second hand decanter centrifuge is an industrial separation unit designed to support upstream processing prior to packaging and bottling operations. Built in 2006, it combines robust performance with straightforward integration to modern process lines. The machine is supplied complete with an electrical control panel and a large-capacity malaxer, enabling efficient preparation and clarification of product before transfer to storage tanks and downstream filling equipment in a used bottling line or new installation.Year of manufacture: 2006Throughput capacity: 50 q/h (approximately 5.0 t/h)Included components: Electrical control panel; malaxer rated at 90 ql (about 9,000 kg)Process type: Continuous solid–liquid separation via horizontal decanter centrifugationOperating configuration: Supplied dismantled for rapid transport and reinstallationApplication: Pre-clarification and separation prior to storage, transfer, and filling in beverage production and industrial packaging workflowsAdvanced Automation & Control SystemsThe unit is delivered complete with an electrical panel that provides centralized control for start/stop sequences, motor protection, and process interlocks. The panel architecture supports safe operation, facilitating integration with plant-level controls, tank level management, and downstream fillers. Clear labeling and organized wiring simplify commissioning and maintenance, while standard protections help safeguard operators and equipment during routine use.Production Line Integration CapabilitiesEngineered for straightforward line connectivity, the decanter centrifuge interfaces easily with upstream feed systems and downstream buffer tanks or clarifiers. Its continuous discharge design helps stabilize flows to filling and packaging equipment, improving overall line efficiency. It can operate as a standalone separation module or be incorporated inline with CIP-ready manifolds, transfer pumps, and automated valves. Flow and residence time can be tuned via feed rate adjustments to accommodate a range of viscosity profiles and solids loads encountered in beverage production and related industrial packaging processes.Machine Condition & Maintenance HistoryThe machine is already dismantled, allowing efficient loading, transport, and rapid placement at the installation site. Mechanical and electrical subsystems are organized for reassembly, with the supplied electrical panel simplifying recommissioning. Overall, it represents a reliable second hand asset ready to be integrated into an existing used bottling line or a new process area following standard installation and start-up procedures.Operational Performance & VersatilityThis decanter centrifuge is designed to deliver stable separation performance across continuous operation, supporting clarification targets that improve downstream filtration and filling quality. The included malaxer enhances upstream mixing and conditioning, optimizing separation efficiency and throughput. Its robust industrial design suits extended duty cycles, while continuous solids dischar... Ljdpfxj Adt Dxe Akmjru

Condition: used, Year of construction: 2013, machine/vehicle number: ET238, Used KRONES labeller machine - 2013Technical Specifications & Performance DataThis Krones rotary labeling machine is engineered for high-speed wrap-around labeling with OPP film using hot melt adhesive. Built in 2013, it is suitable for modern beverage production and industrial packaging lines, offering dependable performance for second hand and used bottling line applications.Manufacturer: KronesModel: AC 3/N/PEYear: 2013Maximum speed: 25,000 bphMachine type: Rotary labeling machineLabel type: OPP roll-fed wrap-aroundAdhesive: Hot glueNumber of plates: 15Machine pitch: 111 mmLabel reels: 2 reels, max roll diameter Ø 500 mmLabel magazines: 2Container material: PETCurrent bottle format: 0.5LWorking height: 1200 mmElectrical data: 400 V, 3 PH + N, 50 Hz; full-load current 23 A; pre-fuse 35 A; enclosure rating IP54Compressed air: 7 barApprox. overall length: 3800 mmHMI: KronesPLC: SiemensAdvanced Automation & Control SystemsThe machine integrates a Krones HMI for intuitive operation and recipe management, coupled with a Siemens PLC for reliable, industry-standard control. The hot glue roll-fed system is optimized for consistent label feed, precise cutting, and accurate wrap-around application at high speeds. The rotary carousel with dedicated bottle plates supports stable container handling, while quick-access stations and repeatable settings facilitate efficient operation and changeovers.Operator-friendly Krones HMISiemens PLC-based automationRepeatable settings for label and container changesIP54 electrical cabinet protectionProduction Line Integration CapabilitiesDesigned for seamless integration into PET bottling equipment, this labeling machine can operate as a standalone unit or inline within a complete packaging machinery ecosystem. It fits beverage production lines handling wrap-around OPP labels on cylindrical PET containers.Standalone or inline integration with conveyorsCompatible with PET cylindrical bottlesSuited for high-speed industrial packaging linesApplicable in used bottling line and second hand equipment upgradesMachine Condition & Maintenance HistoryThe machine is ready for operation, overhauled, and supplied with compatible spare parts. It comes with a 6-month warranty, offering assurance of performance and reliability for immediate deployment in production.Ready for useOverhauled and testedIncludes compatible spare parts6-month warrantyOperational Performance & VersatilityEngineered for beverage applications that demand consistent wrap-around labeling quality a... Ledpfx Ao Adt Iwokmsru

Condition: used, Year of construction: 2020, machine/vehicle number: INC36, Used Apsol case packer - year 2020Technical Specifications & Performance DataThis Apsol Case Packer is a robust secondary packaging solution engineered ( including former, inserter, and sealer) for continuous-duty industrial packaging and beverage production environments. Built in 2020, it combines reliability with efficient throughput for used bottling line upgrades and second hand packaging machinery projects. Each format has its own pick-up head, specific to the product. For the formats used the configuration was: 6x2.Manufacturer: ApsolMachine type: Automatic Case PackerYear of construction: 2020Production capacity: 7–9 boxes per minuteRated voltage: 400 V ACFrequency: 50 HzPower: 26.5 kWFull load current: 49 AElectrical phases: 3ph + N + GNDShort-circuit rating: 10 kAProtection rating: IP54Compliance: CE markedAdvanced Automation & Control SystemsEngineered for dependable, automated case handling, this case packer supports stable, repeatable performance with CE-compliant electrical architecture. The machine’s power and control specifications (400 V, 50 Hz, three-phase) align with standard industrial automation environments, facilitating straightforward connection to existing line controls and supervisory systems. Safety-rated circuits and integrated protections support safe operation and ease of maintenance within modern packaging lines.Production Line Integration CapabilitiesDesigned for flexible line layouts, the Apsol Case Packer integrates upstream with fillers, labelers, and conveyors and downstream with case sealers, printers, and palletizers. It is suitable for beverage production and industrial packaging scenarios where bottles, cans, or jars are collated and loaded into cartons or cases. Its balanced throughput of 7–9 boxes per minute helps harmonize line speeds without creating bottlenecks.Machine Condition & Maintenance HistoryManufactured in 2020, this second hand machine is offered in working condition and ready for operation. The electrical specifications confirm contemporary design standards, supporting efficient recommissioning within a used bottling line or as a standalone case packing asset.Operational Performance & VersatilityThe machine’s performance profile is well-suited for beverage packaging applications, including the collation and loading of PET or glass bottles and aluminum cans into cases, as well as general industrial packaging tasks. With its steady output range, it fits small to mid-speed lines seeking reliable case packing with consistent pack quality and minimal downtime.Installation Requirements & Site PreparationInstallation requires a three-phase 400 V, 50 Hz electrical supply with sufficient capacity for the 26.5 kW load and 49 A full-load current. Plan for appropriate floor space to accommodate infeed and outfeed conveyors and to allow safe operator access for changeovers and routine service. The IP54 protection rating supports installation in typical product... Lrodpfx Ae Adt Nnekmeu

Condition: used, Year of construction: 2011, machine/vehicle number: M318, Used Mesal Filling triblock 12000 BPH - year 2011Technical Specifications & Performance DataThis is an automatic isobaric filling monoblock engineered for PET bottle handling and optimized for carbonated beverage production. Manufactured by MESAL in 2011, model E30-30-10IA1, it combines rinsing, isobaric filling, and capping in a compact rotary platform suitable for medium-speed beverage production. As a versatile second hand asset for a used bottling line, it provides reliable industrial packaging performance with efficient changeover and robust construction.Manufacturer: MESALModel: E30-30-10IA1Year: 2011Production speed: up to 12,000 bottles/hour (format dependent)Container type: PETBottle format: 0.24L (240 ml)Neck finish: 28 mmFilling technology: Isobaric (for carbonated products)Operating mode: AutomaticElectrical data: 400 V, 60 HzPLC/HMI: Omron controlAdvanced Automation & Control SystemsThe monoblock integrates advanced automation to ensure repeatable filling accuracy and stable carbonation control. The Omron PLC coordinates the rinsing carousel, isobaric filling carousel, and capping turret with synchronized drives. Operator-friendly controls help streamline format changes and reduce setup time.Omron PLC automation for reliable machine coordinationCentralized control of rinse, fill, and cap turretsAutomatic operation with format-dependent parametersIsobaric process control for carbonated beverage handlingInterlocked guards and access doors for safe operationProduction Line Integration CapabilitiesDesigned for seamless integration in a beverage production environment, this monoblock is suitable for embedding into a complete used bottling line or operating as a core station within an industrial packaging system. It can be coupled upstream with depalletizing and air conveyors and downstream with labeling, inspection, packing, and palletizing equipment.Inline integration with conveyors and accumulation systemsCompatible with standard PET handling componentsFlexible for carbonated beverage applicationsOptimized for 0.24L PET; adaptable across similar small-format PETMachine Condition & Maintenance HistoryThis second hand monoblock is presented in ready-for-operation condition, suitable for beverage producers seeking dependable performance. The robust engineering typical of MESAL equipment supports consistent uptime when correctly maintained and commissioned.Ready for operation with standard commissioningIndustrial-grade construction for durabilitySuitable for inclusion in a used bottling line upgradeOperational Performance & VersatilityEngineered for carbonated beverage filling, the isobaric system maintains product CO2 content and fill-level stability. The PET handling components support 28 mm neck finishes, common in CSD applicatio... Lodo Adt Nzopfx Akmoru

Condition: used, Year of construction: 2004, machine/vehicle number: M284, Used filling monoblock OCIM for oil tins 1000 bph The used OCIM filling monoblock for oil tins 1000 bph efficiently bottles oil in metal containers. Notably, OCIM manufactured this plant in 2004, ensuring high operational reliability with its robust mechanical structure. Moreover, its optimized filling system delivers precision and continuity in the production process. Technical specifications of teh Filling monoblock OCIM for oil Tins The OCIM monoblock model 8.5 fills 1000 tins par hour, thus maintaining efficient and stable production. Additionally, the system applies a gravity or light vacuum filling method, effectively handling viscous liquids such as oil. Furthermore, 8 fixed valves distribute uniform doses into each container. The machine processes different oil tin formats, specifically: 1-liter oval-shaped tin 3- and 5-liter rectangular tins Consequently, with its adaptable configuration, the OCIM monoblock quickly adjusts to various formats, thereby enhancing production line efficiency. Capping system and safety features For sealing containers, the monoblock utilizes a system with 1 capping head, specifically designed for pull-out spout caps. In particular, the machine supports a 38.5 mm cap diameter, a standard in the edible oil bottling industry. Additionally, the machine incorporates safety devices that protect operators and ensure compliance with industrial regulations. As a result, these systems reduce operational errors and maintain reliable long-term performance. Current state and operational configuration of the Filling monoblock OCIM for oil Tins Currently, the used OCIM filling monoblock for oil tins 1000 bph operates continuously in production, meaning it functions without significant interruptions. Furthermore, the system’s clockwise rotation integrates smoothly into existing lines without requiring complex mechanical adaptations. Given these advantages, this machine provides an optimal solution for companies seeking a reliable, precise, and high-performance bottling plant for oil in metal containers. Moreover, with its modular design and compatibility with various formats, the OCIM monoblock maximizes production efficiency and minimizes machine downtime, which are crucial factors in the industrial bottling sector. Consequently, businesses can ensure continuous and cost-effective operations. Similarly, its adaptability makes it a viable choice for various production demands. In conclusion, this monoblock stands out as a dependable asset in the bottling industry. Lredpe Adt T Tsfx Akmju

Condition: used, Year of construction: 1995, operating hours: 26,000 h, machine/vehicle number: LC668, Used Tetra Pak TBA 8 V100 1000ml slim, helicap 23Technical Specifications & Performance DataThis second hand Tetra Pak complete aseptic carton filling line is configured for dairy production in slim 1.0L Brik carton packages. The core of the line is a Tetra Pak TBA 8 V100 filling machine, manufactured approximately in 1995 and showing approximately 26,000 working hours. A total refurbishment was completed in 2026, followed by a test run and inspection.Main filling machine: Tetra Pak TBA 8 V100Package format: Slim 1.0L aseptic carton packageSpeed: 6.000 TP/hProduct application: Dairy productionYear of manufacture: approximately 1995Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Advanced Automation & Control SystemsThe line is supplied as an integrated industrial packaging solution comprising filling, cap application, conveyor handling and wrap-around tray packing equipment. The Tetra Pak TCAP 45/47 cap applicator has been modified for HeliCap 23 and is designed to handle screw caps with pre-punched paper packaging material. The standard-layout conveyor installation provides product transfer between the listed process stages.Machines of this type are intended to operate as coordinated packaging machinery, enabling continuous movement of filled carton packs from the filler through closure application and secondary packaging. Final operational setup should account for the selected carton material, cap components, product process interface and required line controls.Production Line Integration CapabilitiesThis used bottling line is arranged for aseptic Brik carton handling rather than conventional PET or glass bottle processing. It combines a Tetra Pak filling machine with a dedicated screw-cap applicator, approximately 30 meters of conveyors and a tray packer for wrap-around trays. The equipment is suited to integration within a dairy beverage production and industrial packaging environment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1002001Capping MachineTetra Pak TCAP 45/47ConveyorsConveyorsWrap Around PackerTetra Pak TCBP 70The line can form a practical filling and end-of-line packaging section where cartons are filled, closed, conveyed and packed into wrap-around trays. Upstream dairy processing, hygienic product supply and downstream pallet handling can be matched to the requir... Lodpfx Aezwu Unjkmjru

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 550 h, load capacity: 8,000 kg, lifting height: 4,750 mm, load center: 600 mm, fuel type: gas, mast type: triplex, gearing type: automatic, fork length: 2,400 mm, fork width: 150 mm, fork thickness: 70 mm, front tire type: cushion tires (non-marking), front tire size: 8,25-15, rear tire type: cushion tires (non-marking), Equipment: UVV, cabin, full service history, hydraulic fork positioner, lighting, pallet forks, sideshift, We are offering this used Linde H80T forklift, manufactured in 2018. Excellent condition. Fuel type: LPG Mast type: Triplex (195) Mast lift height: 4,750 mm Maximum tilt angle: 7° Load center: 1,200 mm Side shift: ± 0 mm Tires: 8.25-15, SE-Zw Lodsz R Upxjpfx Akmeru Fork carriage and fork dimensions: 2400 x 150 x 70 mm Fork adjustment – side shift – full cabin – double bottle holder – lighting – blue spot Fork capacity at a load center of 600 mm: 4000 kg If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2016 Serial number: 0148 Equipped with Bünder & Schmitt SOR01-1500R cap sorter, infeed and outfeed conveyors Note! Without lot 15! The machine/line has produced 230, 300, 350, 460, 500, 760 ml plastic bottles. Online auction of high quality food industry processing equipment (e.g. STEPHAN mixing, HEMA, BOSCH piston filling, HEUFT x-ray inspection, NETZSCH pumps, PRASMATIC, PAGO packaging and labelling etc.), various mustard mills, rotary sieves and further universal processing equipment due to the plant closure of the renowned tube, glass and bottled mustard and mayonnaise manufacturer at Neuss near Dusseldorf in Germany. The online auction opens Friday 16 October and closes Tuesday 3 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 29 October Lrjdpfxjz Tiwbs Akmju Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, Thermo Scientific Wellwash Microplate Washer Description Wash 96-well plates reliably with the Thermo Scientific Wellwash, a user-friendly and reliable microplate washer for routine ELISA applications. The washer is equipped with a graphical user interface, various language versions, and a USB port for optimal user-friendliness and excellent convenience. Lrodpjtzb D Djfx Akmsu Features: Large, clear color display and keypad ensure user-friendliness The user interface is logically and intuitively designed, allowing for quick protocol programming User-friendly software requires minimal training and ensures a quick start Pressure-free bottles are safe to use Liquid level sensors in the wash and waste bottles ensure safe operation Automatic pre-rinse function guarantees reliable performance Aerosol cover prevents the escape of aerosols containing infectious material Plate sensor detects whether a plate is present or not Wellwash is used to effectively remove excess liquid from wells Low residual volumes ensure optimal washing performance and reliable assay results More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: Lodjz Srm Nspfx Akmsru 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, KEN 2311 Laboratory Washing Machine - Cleaning System - Lab Washer KEN 2311 is a compact cleaning and disinfection unit. It is used for washing, disinfecting, and drying (optional) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesia equipment, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, and glassware. ■ User-friendly control panel - ensures correct operation ■ Option for individual program selection. 4 programs as standard ■ Process indicator bar shows the progress of the program ■ Dual temperature monitoring (EN/ISO 15883) ■ Connection option for 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications: Power connection 3 x 400 V, N, J, 50 Hz Connection power/fuse rating 10 kW/16 A Water connection Cold, untreated water: 1 unit, ¾" RG, 5-30°C, 0-30°dH Water connection Hot, softened water: 1 unit, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water volume (approx.) per cycle 13-14 l Pump capacity 370 l/min Usable depth 2 doors 560 mm Usable depth without center panel 510 mm Usable width without center panel 510 mm Lrodpfx Aksiuzlvjmou Noise level approx. 59-64 dBA (sound pressure) Ingress protection class IP 21 (not suitable for dishwashers) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed from a location due to its closure and has been stored since, and is in functional condition. It appears to be in very good condition. Unfortunately, we do not have the knowledge or the instruments to test the unit further. Therefore, this unit is sold as is, as shown in the pictures. If you would like to test or inspect this unit before purchasing, please contact us at any time to arrange an appointment. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: new, Showroom Cucinesse Evolve Kitchen Showroom exhibit, unused “Cucinesse EVOLVE” refers to the kitchen and living collection of the Italian furniture manufacturer Cucinesse, characterized by a modern, industrial design. The features include accessories and intelligent systems, such as organized drawers with internal wooden inserts to optimize space, and tall cabinets with floor-to-ceiling doors for seamless lines. With its sophisticated design and meticulous attention to detail, the Evolve model creates an inviting and tactile space where the materials are the focus. Ledpfsx Eyrwox Akmoru Manufacturer: Cucinesse Italy Model: Evolve Sand-beige Type: Kitchen island Countertop: Trespa, Nero Street marble look Countertop height: 94.5 cm Length of kitchen island: 362.5 cm Width of kitchen island: 103.5 cm Height of kitchen island: 94.5 cm Sink: Reginox undermount sink, black, 50 x 40 cm Dishwasher: Beko BDIT38531DC, 60 cm Refrigerator: Miele K7733E, 178 cm, 320 liters, soft-close Bora Puxu induction cooktop with downdraft extractor, 83 x 50 cm Tall cabinets in sand-beige paint and wood look Length: 300 cm Width: 60 cm Height: 220 cm Bottles, decorations, accessories, and furnishings are not included in the price! The Gaggenau steam oven and the Gaggenau vacuum drawer are not included in the price! The faucet is also not included. You can find more items – new and used – in our shop! International shipping costs upon request.

Condition: used, Year of construction: 2008, Overview This ATECMI FLEXOPAL is an automatic depalletizer for empty glass bottles, built in 2008 and used on 750 ml wine bottles at an output of up to 12,000 bottles per hour. The gantry head grips each layer with inflatable tubes and sets it onto the discharge table. An integrated automatic strap cutter with strap intake removes the pallet straps without operator intervention, and magazines take up the interlayers and the empty pallets. The scope includes the pallet infeed and outfeed conveyors, the bottle outfeed conveyors and an ATECMI inliner. Technical data - Manufacturer: ATECMI - Model: FLEXOPAL - Year of manufacture: 2008 - Output: up to 12,000 bottles per hour - Containers: glass bottles, 750 ml (wine) - Layer gripping: inflatable tubes Equipment Lsdpfx Ake Adnxdemoru - Gantry depalletizer with layer gripping head and overhead hood - Automatic strap cutting and strap intake - Magazines for interlayers and empty pallets - Powered roller conveyors for pallet infeed and outfeed - Bottle discharge table with outfeed bottle conveyors - ATECMI inliner - Operator panel with touchscreen and emergency stop - Safety fencing with access doors - Layout drawing available Condition Used. Out of production since the line was dismantled; the depalletizer is still installed and under power. Viewing on site is possible by appointment. Availability Available immediately. Location: France.