Used Ep-B101 Pif/Network-Interface for sale (7,304)

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Hnjdsvvkfdopfx Ah Set

Condition: excellent (used), Sys Tec IT3000 Industrial Weighing Terminal Universal industrial weighing terminal for integration into Ethernet networks It includes proven, configurable standard weighing applications: Hodszp Uybopfx Ah Sont · BASIC for simple weighing systems · COUNT for piece counting · CHECK for simple checkweighing · FILL for simple filling systems · ONLINE for simple weighing systems · TRUCK/ONLINE for vehicle weighing systems with online PC connection. Parameter settings can be configured from a PC using the IT3000 Configurator or directly via the network using a web browser. After each weighing operation, the weight, date, time, and entered data can be saved directly to a file on the PC's hard drive via Ethernet. No special PC software is required for this. In ONLINE mode, the IT3000 can be remotely controlled from a PC via the Ethernet interface. The command set includes weight requests, taring, zero-setting, and dialog functions. Any scale overload or other faults are logged in an error table—complete with date and time—and can be viewed via a web browser. Features an integrated legal-for-trade weight memory; optional legal-for-trade weight memory on the PC hard drive is also available. Operation User guidance via 20-character backlit plain-text display; data entry via numeric and function keys beneath an acid-resistant overlay. Weighing Electronics Integrated measuring amplifier for connecting up to eight 350-ohm strain-gauge load cells (4- and 6-wire technology). Calibration as single-range or multi-range scale and as single-interval or multi-interval scale. Legal-for-trade resolution: 6,000d at max. 80% preload; internal resolution: 524,000d. 50 filtered measurements per second. Calibration performed either on the IT3000 via display/keypad or via the Ethernet interface. Ethernet Interface Integrated Ethernet interface (RJ45) with configurable IP address for 10/100BASE-T networks. Configuration via network using "EtherPort Tool" PC software. Security Data stored in a power-failure-proof manner. Password protection. Interfaces One optional serial interface (selectable: RS232, RS485, or passive 20mA CL) for connecting a printer, remote display, or reference scale. Digital Inputs and Outputs Optional PIM module with two digital 24V inputs and two digital 24V outputs. Power Supply 110 (–15%) – 240 (+10%) VAC; 50/60 Hz, Max. power consumption: 15 VA; Option: 12 – 30 VDC. Operating Temperature –10°C to +40°C at 95% relative humidity, non-condensing. Options / Accessories Ethernet connection cable Protective cover PC COM+ communication software for online operation PC ARCHIVE software for storing weight data on a PC hard drive in a format suitable for legal-for-trade applications. You can find additional items in other sizes—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Year of manufacture: 2022 Recirculating corrosion cyclic test unit / salt spray test unit For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 for corrosion, salt spray, condensation, and climate change testing. The unit is suitable for use in industry, research, development, and quality assurance. Technical data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring rinsing line Year of manufacture: 2022 Test chamber volume: approx. 1450 liters Temperature / climate data: Temperature range, climate testing: +23°C to +70°C Humidity range: 20% to 98% relative humidity Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation test: ambient temperature +5 K to +42°C Electrical data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant according to nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t ND max.: 17 bar g HD max.: 25 bar g Media connections: Compressed air / GN2: max. 12 bar Demineralized water: min. 3 bar / max. 5 bar Water connection for ring rinsing line: max. 6 bar Condensate drain available Exhaust connection available Mains connection: 3/N/PE 400 V / 50 Hz Dimensions according to drawing: External dimensions approx.: 3710 x 1537 x 1769 mm Test chamber length approx.: 2365 mm Insertion height approx.: 850 mm Weight according to nameplate: approx. 710 kg Hnodpfx Ahey Hkg Io Sjt Equipment / features: S!MPAC / Webseason touch control panel Ethernet / network connection USB interface Salt spraying Condensation test Dry climate Climate / humidity operation Ring rinsing line Reservoir Insertion rods / Rod inserts Control cabinet integrated Exhaust connection Compressed air connection Connection for demineralized water Water connection for ring rinsing line Condition Used Optical condition according to the pictures Normal storage and usage marks present Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the pictures Inspection possible by arrangement. Loading can be arranged. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: Hodjwrn Efopfx Ah Sont - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,127 h, pressing force: 138 t, stroke length: 200 mm, total width: 1,750 mm, total height: 2,550 mm, overall weight: 10,200 kg, controller manufacturer: DELEM, controller model: DA-66T CNC, product length (max.): 3,640 mm, number of axes: 6, This 6-axis RICO PRCN Synchro 30135 was manufactured in 2013. It features a press force of 1350 kN and a bending length of 3100 mm. The machine is equipped with a powerful 11 kW motor and offers advanced CNC controlled bending aid systems. If you are looking to get high-quality bending capabilities, consider the RICO PRCN Synchro 30135 press brake we have for sale. Contact us for further details. • Distance Between Side Frames: 2600 mm • Motor Power: 11 kW • Open Height: 400 mm • Throat Depth: 400 mm • Approach Speed: 200 mm/s • Working Speed: 0–10 mm/s • Return Speed: 150 mm/s • X-Axis Speed: 500 mm/s Hodpfxjzgggne Ah Sent • X-Axis Positioning Accuracy: ±0.05 mm • R-Axis Travel: 150 mm • R-Axis Speed: 170 mm/s • R-Axis Positioning Accuracy: ±0.20 mm • R-Axis Repeatability: ±0.20 mm • Z1-Z2 Travel Range: approx. 2500 mm • Z1-Z2 Speed: 2000 mm/s • Z1-Z2 Positioning Accuracy: ±0.10 mm • Z1-Z2 Repeatability: ±0.10 mm • Laser Safety System: Fiessler AKAS LC-II F • Hydraulic System: Hoerbiger • Product and Tool Memory: 64 MB • Interfaces: 2 × USB, RS232C, Network Interface, PLC Interface • Independent Z1-Z2 Finger Positioning: Yes • Free-Moving Right Backgauge Finger: Yes • Right Finger Travel Range: 200 mm • Relative Right Finger Adjustment: +100 mm / -100 mm • Pneumatic Sheet Support Arms with Ball Rollers: Yes • CNC Controlled Bending Aid System: ACF1 • Number of Motorized Bending Aids: 2 • Bending Aid Load Capacity: approx. 150 kg per unit • Bending Aid Support Range: approx. 900–1500 mm • Bending Aid Width per Arm: approx. 350 mm • Bending Aid Height Adjustment: ±60 mm • Bending Aid Depth Adjustment: 0–60 mm • Bending Aid Accuracy: ±0.2 mm • Support Arm Working Area: 500 mm • Maximum Box Height with Raised Tooling System: up to 240 mm • Tool Clamping: Pneumatic Upper Clamping • Operating Hours: approx. 11,270 h Technical Specification Bending Length 3100 mm

Condition: used, Year of construction: 2020, turning diameter max. 3.800 mm diameter of spindle flange 1.900 mm max. swing diameter 3.800 mm control 840 D sl Siemens turning speed range - main spindle max. 100 min/-1 power capacity - main spindel 200 kW max. Torque 67.000 Nm gear box 1:30 tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm max. tool diameter 120 mm 0 125 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm max. tool weight 20 kg max. tool length 400 mm x-axis 1: 2.800 mm x-axis 2: 3.200 mm z-axis 1.000 mm rapid traverse X: 32 / Z: 20 m/min feed power X/Z: 22 kN total power requirement 280 kVA weight of the machine ca. 155 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC Vertical Turning Machine PITTLER - PV 4000 Hnodpeyrhl Djfx Ah Sst - Control Expansion / Software SINUMERIK 828D/840D SL ProgramSYNC Software Option - 12-Jaw Compensating Chuck by RÖHM - Retractable Step Guards - Coolant Circulation - Coolant Conditioning - Oil Hose Skimmer - SIEMENS Safety Integrated - Network Interface / Data Transfer DNC Option - Remote Diagnostics for NC Functionality - Teleservice for Integrated PLC of the Sinumerik 840D - Ethernet Connection in the Control Cabinet - Variable Speed ??Range to Reduce Vibration - Air Purifier, Electrostatic Discharge - Probe for In-Process Workpiece Measurement - Walk-in Work Area

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Hnodovvi Rfepfx Ah Sjt

Condition: used, Industrial gateway for connecting and implementing various Industrial Ethernet protocols. Suitable for the integration of heterogeneous automation networks. Manufacturer: Hilscher Series: netTAP Type: NT 151-RE-RE Product type: Industrial Ethernet Gateway Condition: used Hedpfxezdu Dco Ah Sont Quantity: 1 Communication platform: netTAP 151 Ethernet ports: 2 x RJ45 Interface: Ethernet Memory card slot: Yes USB interface: Yes Supply voltage: 18 V DC to 30 V DC Power consumption: 3.87 W Current consumption: 208 mA at 18 V DC Mounting type: DIN rail Maximum ambient temperature: 50 °C Protection class: IP20

Condition: new, Year of construction: 2025, functionality: fully functional, Cutting range: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame • Manufacture of precision components to 1/100 mm accuracy • Solid, self-supporting, permanently welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of central support • Automatic roller locking during cutting Saw Beam • Stable, durable steel construction of the saw beam • Automatic saw beam locking with interface detection Saw Unit • Play-free, easy-running guides • Robust bearing of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased operator comfort thanks to largely automated operation • Laser-assisted display for horizontal cuts • Automatic motor carriage clamping Hnedpsyx H Dtofx Ah Sst • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch-over to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized user guidance • Multilingual user interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic cutting process • Infinitely variable feed speed from 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • UPS 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winner (including the Design Prize Switzerland) • Ergonomically optimized for function and user Installation • Wall-mounted or free-standing installation possible

Condition: ready for operation (used), Year of construction: 2018, operating hours: 2,874 h, punching force: 17 t, sheet thickness (max.): 6 mm, number of axes: 3, This 3-axis TRUMPF Trupunch1000 S05 was manufactured in 2018. It features a working area of 2500 x 1250 mm and is equipped with maintenance-free three-phase motors. The machine includes a linear magazine with 20 stations for clamps and tools, and an electro-hydraulic punching head with programmable features. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trupunch1000 S05 CNC punching machine we have for sale. Contact us for further details. Hjdpszc R Enofx Ah Sent - Working Area: 2500 x 1250 mm (Medium Format)- Drives: Maintenance-free three-phase motors- Frame: C-frame- Tool Storage: Linear magazine with 20 stations for clamps and tools- Clamps: 2 hydraulic sheet clamps- Punching Head: Electro-hydraulic punching head, rotating mono-tool adapter, programmable stripper position, tool length compensation, slug extraction- Functions: Forming, MultiTool, MultiBend, Thread forming with tap breakage control, Signing / fast beading- Control: TRUMPF control based on Rexroth IndraMotion MTX- Interface: USB interface, RJ45 network connection, Wireless Operation Point (VOS basis)- Table Type: Ball table with brush inserts- Safety: CE marking, multi-beam light barriers, rapid drive shutdown- Frequency: 50 Hz- Voltage: 400 V- Included Accessories: 18 original Trumpf tool cassettes (including 10 RTC-cassettes 2017 with die plates from original order), extensive selection of punching tools, and a Trumpf "quicksharp" punch grinding machine (YOM 89)

Condition: excellent (used), Year of construction: 2016, operating hours: 7,260 h, functionality: fully functional, Willibald EP5500 Shark waste shredder, manufactured in 2016. In perfect condition and ready for operation, with 7,260 operating hours. Hedpfx Ahozrv Huo Sont

Condition: new, Year of construction: 2025, functionality: fully functional, power: 9 kW (12.24 HP), cutting height (max.): 82 mm, saw blade diameter: 315 mm, rotational speed (max.): 4,400 rpm, total length: 3,300 mm, total width: 3,350 mm, overall weight: 3,000 kg, cutting length (max.): 3,300 mm, feed rate X-axis: 100 m/min, feed rate Z-axis: 150 m/min, saw blade speed: 4,400 rpm, saw drive: 9,000 W, Equipment: rotational speed infinitely variable, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control: PA-WIN10 + SIMATIC S7 | Powerful panel dividing system for highest precision & efficiency The SCHEER PA 4500 is a robust, industrially proven panel dividing saw for the precise processing of coated and uncoated wood-based panels. It was designed for demanding applications and already meets all the requirements of modern cutting operations in its basic configuration. Main technical data: Cutting length (max.): 3300 mm Cutting height (stepless): up to 82 mm Main saw blade: Ø 315 mm | 60 teeth | cutting width 3.2 mm Scoring saw blade: Ø 200 mm | conical | cutting width 3.2–4.0 mm Saw motor: 9.0 kW Scoring motor: 1.1 kW Saw carriage drive: 2.32 kW Main saw blade speed: approx. 4400 rpm Saw carriage feed: 0–100 m/min (stepless adjustable) Saw carriage return: 150 m/min (lowered) Electrical connection: 400V / 50Hz / 3Ph Pneumatics: 6 bar, 15 NL/stroke Extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s Working height: approx. 930 mm Angle stop: left Machine concept & highlights: Heavy cast honeycomb construction for vibration damping Absolute value encoder for highest positioning accuracy (no referencing) Distance- and time-optimized saw carriage operation Hedpewrpcxsfx Ah Ssnt Automatic oil mist lubrication & blowing of the guides Program-controlled saw blade adjustment (height & scoring side) ProLock quick-release system for the saw blade “wood dust tested” – emission only 0.65 mg/m³ System equipment: 1x angle pressing device WP 8500-1400 Adjustment range: 0–2200 mm Pressing force: approx. 480 N Cycle-controlled retraction function for panel transport 1x material feed table HP 5130 – 33 x 33 Mounted at the back with hardened guides & racks Roller conveyor system for easy panel transport 6 clamping fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy 1x angle stop table HP 5137-1-1465 1x workpiece support table HP 5135-1-1465 Pertinax coating, each 1465 x 800 mm 1x air cushion unit LK 5169 central radial fan, pressure max. 2800 N/m² 1x control cabinet dustproof, separately mounted, vibration protected 19" TFT flat screen, keyboard, trackball Control & software: SIMATIC WinLC RTX soft PLC with S7 functionality PA-WIN10 operating interface on Windows 10 Professional (64 bit) (update to the latest Windows version possible at any time) True-to-scale real-time simulation and graphical cutting plan editor Integrated interfaces (label printing, panel warehouse management, etc.) Network-capable, future-proof, modularly expandable Operating modes & operation: Manual operation: single, chain dimension, trimming, residual cutting Automatic operation: cutting plan processing, online order processing Editor: parts list-based planning & optimization Maintenance & diagnosis: saw blade measurement, individual control, and more 📞 Contact us for an individual offer or a viewing. Delivery, installation, commissioning, and training possible as options.

Condition: good (used), mileage: 4,21,528 km, power: 130 kW (176.75 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, tail-lift, = Additional Options and Equipment = - Leaf suspension - Roof spoiler - EPS - Particulate filter - Radio/CD player - Side door - Toolbox = Further Information = Axle Configuration Front axle: steered; suspension: leaf spring Rear axle: suspension: air suspension Weights Unladen weight: 8,600 kg Payload: 3,390 kg Gross vehicle weight: 11,990 kg Functional Refrigeration engine: diesel and electric Condition Technical condition: good Visual condition: good Warranty Disclaimer: No liability for typographical or printing errors. Subject to change, prior sale and errors! Further Information Please contact Emad Al Shogran for further information. Vehicle number: 141 Mercedes Benz Atego 1 Carrier Supra 1250 / Air Conditioning / Euro 6 / Tail lift .: WDB96702510017607 Suspension: leaf/air Transmission: automatic Air conditioning Engine brake Distance assist Lane keeping assist EURO 6 - AdBlue Wheelbase: 4,760 mm Refrigeration unit Brand: CARRIER Type: Supra 1250 Refrigeration engine: diesel + electric Internal dimensions: Hnedpfx Asv Rclfjh Sot Length: 6,650 mm Width: 2,500 mm Height: 2,500 mm Special features: Audio system: CD radio comfort (Bluetooth), battery 165 Ah, standard cockpit, driver assistance system: active brake assist, driver assistance system: lane keeping assist, electric windows, Fleetboard Dispopilot guide, tinted windscreen, generator 100 A, mount for Fleetboard Dispopilot, communication interface, fuel tank: 180 L plastic, LED light package, frame overhang extension, spare wheel, acoustic reverse warning (external warning signal), tail lift control switch, cab seats: driver's seat armrest, cab seats: driver's comfort suspension seat, exterior sun visor, side underrun protection Additional equipment: Euro 6 emission standard, axle configuration: 4x2, front axle load 5.3 t, approach/front mirror, exhaust tailpipe to vehicle center, electric adjustable exterior mirror, left, steel air reservoir, low pressure air unit, two-step entry, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf/air, front springs: 4.4 t, 6-speed gearbox - type: G 71-6, 6-speed gearbox - type: G 90-6, urea tank (AdBlue): 25 L, manual roof hatch (steel), rear axle bevel gear 390, info display 10.4 cm with supplementary indicator, body/chassis: chassis, engine 5.1 l - 130 kW diesel (OM 934), engine brake, engine compartment encapsulation, wheelbase 4,760 mm, disc brakes front and rear axle, seat cover/upholstery: fabric, cab seats: single passenger seat, fixed, rear fender splash guard, rear axle stabilizer, driver cab type control, tachograph / EC control unit, fixed rear underrun protection, front underrun protection, immobiliser, permitted gross weight 11.99 t Refrigeration unit brand: Carrier = Company Information = No liability for typographical or printing errors. Subject to change, prior sale and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: ready for operation (used), Year of construction: 2011, operating hours: 51,000 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 700 mm, controller model: FANUC 16i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 650 mm Hsdpfx Ahozxztas Sjnt Travel range Z-axis: 700 mm Spindle speed: 12,000 rpm Tool interface: HSK A63 Number of tool magazine positions: 295 Rotary table: stepless, 360,000 indexing positions Rotary table speed: 65 rpm Pallet system: 7-position multi-pallet system Pallet size: 500 x 500 mm Maximum pallet load: 550 kg Maximum workpiece diameter: 800 mm MACHINE DETAILS CNC control: FANUC 16i Coolant tank: 750 l Coolant filtration system: self-cleaning Loading/unloading stations: 1 Operating hours: 51,000 h EQUIPMENT Cooling unit for temperature control of the spindle unit Spindle prepared for coolant supply through the tool flange Climate-controlled control cabinet with air conditioning unit Full enclosure of the work and machine area Work area lighting Scraper-type chip conveyor with rear discharge Conveyor screws for chip removal Closed upper machine cover, prepared for connection to a central extraction system C301 Workpiece cleaning C303 Tool taper cleaning C410 Tool Monitor MCM C305 Oil separator C333 Automatic coolant refill C308 High-pressure coolant system, 65 bar C403 Tool presence monitoring via laser C412 Balluff read/write system with JTERM-01 C408 Marposs wireless measuring probe MIDA T36 jFMX MCM monitoring system including Network Part Program

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer an untested ProJet 3D printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Printing Modes: HD – High Definition UHD – Ultra High Definition Net Build Volume (xyz) HD Mode: 298 x 185 x 203 mm UHD Mode: 127 x 178 x 152 mm XHD Mode: n/a Resolution: HD Mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD Mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD Mode: n/a Hedpfxozdnnue Ah Sent Accuracy (typical): 0.1 - 0.2% of part dimension Accuracy depends on build parameters, part geometry, part placement, and post-processor settings. Email Notification: No Build Materials: VisiJet® EX200 Build Material: Durable solid material with a long service life VisiJet® SR200 Build Material: Cost-effective multipurpose material. Available in natural, blue, or gray VisiJet® HR200 Build Material: Available in blue, specifically developed for investment casting applications Support Material: VisiJet® S100 Support Material: Non-toxic wax material for melting away the supports without manual intervention Power Supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (LxWxH): Printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and machining optimization tools Extensive part file editing tools Automatic support generation Job statistics Network Compatibility: 10/100 Ethernet interface Hardware Requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating System: Windows XP Professional, Windows Vista, Windows 7 Supported File Formats: STL and SLC Ambient Temperature: 18-28 °C Noise Level

Condition: used, Industrial Ethernet switch for use in automation and production networks. Robust device from the SCALANCE-XM400 series with management functions for industrial network infrastructures. Manufacturer: Siemens Series: SCALANCE XM400 Type: XM408-8C Article number: 6GK5408-8GR00-2AM2 Product type: Managed Industrial Ethernet Switch Condition: used Quantity: 2 Ports: 8 combo ports Interfaces: RJ45 Ethernet and SFP ports Transmission rate: 10/100/1000 Mbit/s Management: Web-based management, SNMP, CLI Hjdpfxozdu Afj Ah Sent Redundancy functions: Supports industrial ring and redundancy protocols Supply voltage: 24 V DC Mounting type: DIN rail Protection class: IP20 Series: SCALANCE X-400 Application area: Industrial Ethernet networks, automation technology, plant networking Quantity: 2 units available

Condition: good (used), Year of construction: 2016, FOR SALE CNC Lathe TOP TURN S20C – Year 2016 Brand: TOP TURN (Distributed by major machine tool networks) Model: S20C Year: 2016 CNC Control: FAGOR (User-friendly interface for teaching cycles and ISO programming) Technical Description This 2016 CNC lathe is a versatile machine, ideal for precision work in small to medium production batches. Its modern design offers excellent rigidity and very quick set-up, thanks to the Fagor control system. Capacity: - Swing over bed: 400 mm - Swing over carriage: 210 mm - Distance between centers: 1,000 mm - Bed width: 300 mm Spindle: - Spindle bore: 52 mm (Comfortable bar capacity) - Spindle speed: Up to 2,500 rpm - Spindle nose: Camlock D1-6 Included Equipment - FAGOR CNC: Color screen, cycle-assisted programming (ideal for operators used to conventional machines) - Turret: Automatic turret (electric/hydraulic) for fast and programmable tool changes - Chuck: Precision 3-jaw chuck (approx. 200 mm diameter) - Tailstock: CM4, robust - Safety: Fully enclosed machine with interlocked sliding doors, compliant with CE standards - Coolant system: Centralized with integrated chip tray Highlights - Recent (2016): Modern electronic and mechanical components, easy to source spare parts - Precision: High-precision ball screws on both axes - Compact: Small footprint relative to its machining capacity Weight and Dimensions Hsdpfx Ahey Slttj Sont - Dimensions: Approx. 2,400 x 1,400 x 1,700 mm - Weight: Approx. 1,800 kg

Condition: new, Nexturn SA32B with the following attachments: - Loading magazine Iemca Boss 338 Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, Hnodpovyzp Isfx Ah Sst including transformer for supplying the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. discharge of long parts Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bush unit Guide bush type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling device for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear face machining Rear face machining with 4 machining stations ER16) Drive unit for tools for rear face machining on 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece ejector Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adjustment up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar loader magazine Interface for chip conveyor PCMCIA card slot USB interface RJ-45-LAN interface RS 232 C interface Control functions in standard scope of delivery: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hour display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread milling with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main spindle and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control Hodpfjziyxpex Ah Sjnt - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Year of construction: 2016, condition: good (used), RFID tunnel, Sick, belt width 83 cm, ideal for capturing content and quantity, e.g., in cartons – used – Price per unit ex location (net): €9,950! Manufacturer: Sick Year of manufacture: unknown, can be clarified, probably 2016 Model: to be provided Type: to be provided P/N: to be provided S/N: to be provided Tunnel width: external approx. 1.10 m Tunnel length: to be provided Belt conveyor: Belt width: approx. 83 cm Total conveyor element width: approx. 88 cm Element length: approx. 4 m Condition: good Available: immediately Location: Unna Gain insight into cartons and check content and quantity without having to open packaging. Since shipment verification is crucial to ensure customer satisfaction, make sure your customer receives exactly what they ordered with an RFID tunnel system. This system ensures that the ordered goods are delivered, minimizing expensive returns. 2.1 Intended Use The RFID read/write device RFU630-041xx is an intelligent 4Dpro sensor of the RFU6xx (UHF) product family. Version (operating range): Long Range. The stationary device automatically identifies radio-based data carriers (transponders) on moving or stationary objects. The device also supports management of the data carriers. Hodpfx Aewx H Rgeh Sont The compact read/write unit processes the data of all common passive transponders via a maximum of 4 external antennas in accordance with ISO/TEC 18000-6C and EPCglobal UHFC1G2 within the region-specific UHF carrier frequency range. The device does not have an integrated (internal) antenna. Intelligent process logic enables processing either as a stand-alone solution or grouped in network operation. The device sends the read results to a host computer via its host interface. The computer coordinates further data processing within the workflow. Through its host interface, the device receives corresponding commands for data carrier management (writing, reading, etc.). Device variants refer to regional allocation; see device overview.

Condition: good (used), mileage: 4,47,732 km, power: 130 kW (176.75 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, tail-lift, = Other options and accessories = - Leaf suspension - Roof spoiler - EPS (Electronic Power Steering) - Particulate filter - Radio/CD player - Side door - Toolbox = Additional information = Axle configuration Front axle: Steering; Suspension: Leaf spring Rear axle: Suspension: Air suspension Weights Curb weight: 8,600 kg Payload: 3,390 kg Gross vehicle weight: 11,990 kg Functional Refrigeration unit: Diesel and electric drive Condition Technical condition: Good Visual condition: Good Warranty Disclaimer: No liability for printing or typographical errors. Subject to change, prior sale, and mistakes! More information Please contact Emad Al Shogran for more information. Vehicle number: 107 Mercedes Benz Atego 1 Carrier Supra 1250 / A/C / Euro 6 / Tail Lift VIN: WDB96702510100460 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Distance assistant Lane keeping assistant EURO 6 - AdBlue Wheelbase: 4760 mm Refrigeration unit Brand: CARRIER Type: Supra 1250 Cooling engine: Diesel + Electric Internal dimensions: Length: 6.65 m Width: 2.50 m Height: 2.50 m Special equipment: Audio system: Comfort CD radio (Bluetooth), 165 Ah battery, standard cockpit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane departure warning, electric windows, Fleetboard Dispopilot guide, tinted windshield, 100 A alternator, holder for Fleetboard Dispopilot, communication interface, fuel tank: 180 L plastic, LED light package, chassis extension, spare wheel, acoustic reverse warning (external signal), tail lift switch, cab seats: driver's seat with armrest, cab seats: comfort driver's suspension seat, exterior sun visor, side underrun protection More equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 5.3 t, approach/front mirror, exhaust outlet to vehicle center, electrically adjustable external mirror (left), steel air reservoir, low-pressure air unit, two-step entry, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf/air, front suspension 4.4 t, 6-speed transmission - type: G 71-6, 6-speed transmission - type: G 90-6, urea tank (AdBlue): 25 L, manual roof hatch (steel), rear axle crown wheel 390, info display 10.4 cm with additional indicator, body/chassis: chassis, engine 5.1 L - 130 kW diesel (OM 934), engine brake, engine compartment encapsulation, wheelbase 4760 mm, disc brakes front and rear, seat cover/upholstery: fabric, cab seats: front passenger single seat, fixed, rear mudguard splash protection, rear axle stabilizer, cab control type, tachograph / EC control unit, fixed rear underrun protection, front underrun protection, immobilizer, permitted gross weight 11.99 t Refrigeration unit brand: Carrier = Company information = No liability for printing or typographical errors. Subject to change, prior sale, and mistakes! Hedpfx Ahovk Erbs Ssnt Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 Hnedpfezuynhsx Ah Sst parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for powering the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. ejection of long parts Scope of supply: FANUC Oi TF+ CNC control with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bushing unit Guide bushing type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling unit for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear machining Rear machining with 4 machining stations ER16 Drive unit for tools for rear machining, 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece remover Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Tool box with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control functions in standard scope of supply: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hours display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands Hnsdpfjvyzqfsx Ah Sot

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Hodpfxslfilyj Ah Sjnt Frequency range: 1 - 600 kHz programmable Marking speed: max. 650 characters / second Weight 4U Laser Control Cabinet: 15 kg Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm colour: Grey

Condition: good (used), mileage: 4,62,334 km, power: 130 kW (176.75 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, tail-lift, = Additional options and equipment = - Leaf suspension - Roof spoiler Hnjdpfsvl Szfox Ah Sjt - EPS (Electronic Stability Program) - Particulate filter - Radio/CD player - Side door - Toolbox = Further information = Axle configuration Front axle: Steering; Suspension: Leaf suspension Rear axle: Suspension: Air suspension Weights Unladen weight: 8,600 kg Payload: 3,390 kg gross vehicle weight (GVW): 11,990 kg Functionality Refrigeration unit: diesel and electric Condition Technical condition: good Visual condition: good Warranty Warranty: No liability for printing and typographical errors. Subject to change, prior sale, and mistakes! Identification Reference number: 33 Further information Please contact Emad Al Shogran for more information. Vehicle number: 33 Mercedes Benz Atego 1 Carrier Supra 1250 / AC / Euro 6 / tail lift VIN: WDB96702510017605 Suspension: Leaf / air Transmission: Automatic Air conditioning Engine brake Distance control assistant Lane departure warning EURO 6 - AdBlue Wheelbase: 4,760 mm Refrigeration unit Brand: CARRIER Type: Supra 1250 Refrigeration unit: Diesel + electric Internal dimensions: Length: 6.65 m Width: 2.50 m Height: 2.50 m Special equipment: Audio system: CD radio comfort (Bluetooth), 165 Ah battery, standard cockpit, driver assistance system: brake assist (Active Brake-Assist), driver assistance system: lane departure warning, electric windows, Fleetboard Dispopilot guide, tinted windscreen, 100 A alternator, holder for Fleetboard Dispopilot, communication interface, fuel tank: 180 liters plastic, LED lighting package, chassis extension, spare wheel, acoustic reversing warning (external warning signal), tail lift switch, seats in cab: driver’s seat with armrest, seats in cab: comfort suspension seat, external sun visor, lateral underrun protection Further features: Emission standard EURO 6, axle configuration: 4x2, front axle load 5.3 t, starting/front mirror, exhaust pipe to vehicle center, external mirrors electrically adjustable, left, steel air tank, low-pressure air unit, two-step entry, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf/air, front suspension 4.4 t, 6-speed transmission - type: G 71-6, 6-speed transmission - type: G 90-6, AdBlue tank: 25 liters, manual roof hatch (steel), rear axle crown wheel 390, 10.4 cm info display with additional indicator, body/chassis: chassis, engine 5.1 l - 130 kW diesel (OM 934), engine brake, engine compartment encapsulation, wheelbase 4,760 mm, disc brakes front and rear, seat cover/upholstery: fabric, seats in cab: single passenger seat, fixed, rear mudguard splash guards, rear axle stabilizer, control type cab, tachograph / EC control device, fixed rear underrun protection, front underrun protection, immobilizer, permitted total weight 11.99 t Refrigeration unit brand: Carrier = Company information = No liability for printing and typographical errors. Subject to change, prior sale, and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email: