Used Exner Double-Column Presse for sale (25,352)

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? Lsdpfxefxyh Re Apdjag :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. Ljdpfek S Dt Tsx Apdoag - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? Ljdpfx Apofxygpjdjag :1200 ? :1200 ?

Year of construction: 1978, condition: used, pressure 25 t distance between columns 580 mm stroke 150 mm dayligth 370 mm table surface area 560x400 mm ram surface 400x350 mm hole in the table 80 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 1500x500x2500 m Lasdpolp U Arsfx Apdeg

Year of construction: 1976, condition: used, pressure 100 t Laodjlp U Euopfx Apdeg distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm Lajdpfxsq Rhkws Apdjg table height 850 mm weight of the machine ca. 2,5 t

Year of construction: 1979, condition: used, pressure 160 t Laedolp Uz Ropfx Apdeg distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm Laodpfx Aslp Uz Uepdsg stroke 150 mm ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: used, pressure 100 t distance between columns 310 mm no. of strokes 80 Hub/min ram - range of adjustment 40 mm table surface area 400x300 mm ram surface 250x190 mm table height 960 mm tool hole in ram Ø 35 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2200 m Lajdpfelp U Sdsx Apdeg

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm Ljdpfx Aevnwd Depdoag stroke 100 mm table surface area 440x320 mm ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Year of construction: 1976, condition: used, pressure 250 t Ljdpfx Apolp U A Sedjag distance between columns 900 mm stroke 300 mm table surface area 850x900 mm ram surface 800x880 mm stroke 300 mm table height 1050 mm

Year of construction: 1964, condition: used, pressure 40 t distance between columns 450 mm stroke 20-50 mm ram - range of adjustment 60 mm table surface area 370x400 mm Laedpfx Apelp U Exedog ram surface 250x370 mm hole in the table 120x280 mm table height 850 mm weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1600x1300x2800 mm

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V Lajdjfxyh Aspfx Apdsg :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet Lajdpfx Aegpxc Sspdsg

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Ledpfx Asd E U Nnepdjag Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 250 t, table width: 1,000 mm, table length: 1,200 mm, die cushion stroke: 200 mm, The machine still needs to be built. Requirements can be considered where possible. Ejector in ram – approx. 10 t. Table draw cushion approx. 800 x 850 mm. Weight approx. 18 t. Stroke approx. 600 mm. Laedpovga H Ejfx Apdog

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Heated Press – Double Column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was already built and delivered to a customer. We can manufacture this machine for you again on very short notice—customized to your individual requirements if desired. This is a hydraulic heated press with electrically heated plates and a manual sliding table for pressing, laminating, and forming processes involving heat. Base price: €42,000 net Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine to the specific application. The base machine provides a functional standard configuration—in practice, it is often supplemented with additional features and configured according to project requirements. ==== Technical Data + Information: ==== General Information * Design: Double column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area * Table size: 700 × 500 mm * Heating plates: 700 × 500 × 65 mm * Installation height: max. 800 mm * Table stroke: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-point slide guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump output: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Control & Operation * SIEMENS S7-1200 control with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment * Electrically heated press plates up to 200 °C Lodpoy H Dtzsfx Apdeag * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Dual-layer paint finish according to RAL ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, forming press applications Heated press, hydraulic press, double column press, thermo press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian National Safety Directive NR 12, which is based on and extends these standards. Our key strength lies in special purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- Ljdpfx Ajyutvyopdjag binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1969, press capacity 250 t spindle diameter 160 mm ram stroke range 180 mm stroke speed 71 Hub/min column daylight 450 mm table surface area 560x450 mm ram surface 450x400 mm total power requirement 12 kW weight of the machine ca. 9 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Ljdsyt R Epspfx Apdoag More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1993, pressure 630 KN distance between columns 800 mm stroke 150 mm table surface area 720x550 mm ram surface 720x520 mm dayligth 420 mm rapid drop speed 394 mm/sec working feed 71/17 mm/sec return speed 390 mm/sec adjustment movement of the stroke 120 mm total power requirement 15 kW Cutting impact dampening Ljdpsyutwkofx Apdjag The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1998, x-travel 1650 mm y-travel 1950 mm z-travel 700 mm Control FIDIA M20 spindle taper HSK 63 A Lsdpfx Asz Dxr Uepdoag spindle turning speed range 16000 U/min milling spindle drive 28 kW head swivability +- 100 ° c-axis 365 ° weight of the machine ca. 27 t dimensions of the machine ca. 4,2 x 4,9 x 4,4 m

Condition: excellent (used), Year of construction: 2019, operating hours: 7,000 h, functionality: fully functional, MACHINE CONSTRUCTION: - Cast iron bed, spindle head, and saddle system developed through computer-aided design and analysis (CAD/CAE), ensuring high rigidity and vibration damping - Fully supported table guide in every working position - X-axis (table movement) on 2 precision cylindrical roller guides, supported by 6 runner blocks each - Y-axis with 2 precision cylindrical roller guides - Z-axis with hardened and ground guideways, with TURCITE-B coating - Guideway protection via metal telescopic covers - Hydraulic counterweight / balance system - CE conformity Axes: - Preloaded ballscrews with large pitch for long-lasting precision - Digitally controlled, liquid-cooled ballscrew on the X-axis - Gear-driven ballscrews, ballscrew nuts with centralized lubrication, and lifetime-lubricated bearings CONTROLLER & ELECTRONICS + CAPACITY: - High-speed CNC, 1 ms block processing time - Storage capacity: 120 GB SSD - Technology program memory: 100 GB SSD - Number of processor cores: 4 CNC operating system: - User interface operating system: Windows 10 - Technology program storage: WINDOWS file system - Total storage capacity (system program, PLC, parameters, technology program memory) on a single SSD - New user interface (40-00005216-00w) SCREEN: Color graphical LCD touchscreen COMMUNICATION: USB, Ethernet, EtherCAT MEASURING SYSTEM: - HEIDENHAIN absolute EnDat 2.2 - PROGRAMMING: ISO, myNCT TECHNICAL DATA: - X-travel: 2100 mm - Y-travel: 1500 mm - Z-travel: 1000 mm Distance from spindle nose to table surface: 200~1000 mm Distance between columns: 1650 mm Distance between table and gantry/crossrail: 1710 mm AXES: - Rapid traverse speed X / Y / Z axis: 20 / 20 / 15 m/min - Max. working speed: 10 m/min - Motor power: 4 kW ACCURACY (according to JIS6338): - Positioning accuracy: +/- 0.01 mm (In the entire working area!) - Repeatability: +/- 0.004 mm TOOLING: - Max. tool diameter / with adjacent tool omitted: 125 / 215 mm - Max. tool length: 400 mm - Max. tool weight: 20 kg - Optional tool taper: SK50 Accessories & Equipment: - Angle head (manual) - Chip conveyor - Coolant flush gun Lodozzf Ruepfx Apdeag - 15 pcs of SK50 tool holders - Machine leveling feet - Manuals The machine is in good used condition and operates accurately.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 80100 € 1513.89 € 60 to 350 mm 550?850 mm 600?1000 mm 600 mm 100 mm/s 10 mm/s Lodewiqz Rjpfx Apdoag 165 mm/s 11 kW 1950 mm 1900 mm 2850 mm 5350 kg 170 bar 24 to 150 mm 100 mm 156 bar 65 mm/sec. 470?650 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to "CE" rules

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 83200 € 1572.48 € 130 to 4.5 mm 650 mm 950 mm 220 mm 1 - 132 mm 50 1/min 6 95 mm 70 mm 325 mm 500 mm 11 kW 1800 mm 1725 mm 3020 mm 8000 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment Laedpfx Ajwiqn Rspdog * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Ljdpfx Aswbtn Ropdoag Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Stroke (mm): 1000 mm Daylight (mm): 1400 mm Advance Speed (mm/sec): 1400 mm/sec Return Speed (mm/sec): 200 mm/sec Working Speed (mm/sec): 2–12 mm/sec Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg