Used Film Coating System for sale (35,644)

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: Pjdpfow Hrrrex Akfogk From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. It had been idle for the last year due to a change in the packaging process. Pgedpfx Akjxp D D Nofsk The decision was made to sell it. If you have any questions, I will be happy to answer them.

Condition: used, machine/vehicle number: WSJPRS110BTB22533, axle configuration: 1 axle, first registration: 11/2011, suspension: air, tire condition: 40 %, color: other, Year of construction: 2011, Equipment: tail-lift, = Additional options and accessories = - Air Suspension Pgodpfx Aoyiav Tjkfok - Disc brakes - Steering Axle = More information = Make axles: SAF Tyre profile: 40% Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels Tail lift: MBB, tail lift, 2500 kg

Condition: excellent (used), Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high power AC and DC load in one unit and provides an ideal test solution for UPS, AVR and D/A inverters, especially for DUTs with step or square waveforms Each high power series AC&DC load has its own control and display panel and 5-state recall/memory, allowing for more efficient load setup Adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment Built-in GO/NG gauge test function provides short test result diagnosis for production and QC test throughput Features Voltage, current, wattage and VA variable display. CC, Linear CC, CR and Crest Factor modes. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W and ℃. Dual 4 1/2 meter display for voltage, current, watts and VA. Suitable for sine, square and step waves. Pgsdpfxom Tvyxj Akfok Width 600 mm Height 1506 mm Depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, axle configuration: 3 axles, first registration: 08/2005, total length: 12,650 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,210 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Tyre tread left: 30%; Tyre tread right: 30% Pgsdpfxsyibq Eo Akfjk Rear axle 3: Steered; Tyre tread left: 40%; Tyre tread right: 40% Weights Unladen weight: 7,390 kg Payload: 31,610 kg Gross vehicle weight: 39,000 kg Functional Loading platform height: 130 cm Condition Damages: none Identification Registration number: OH-84-ZK

Condition: used, System D8 brand painting chain, 94.50 linear meters, complete with towing, tracks and chain. Pedpfx Aom D Hcfokfogk

Condition: ready for operation (used), Year of construction: 2004, I sell the 3-side brushing machine Quickwood CD2-1300, Year 2004. 2 pcs. Surface brushes from top 2 pcs. Side brushes Working width 1300mm Pgsdpfjvylmqex Akfek Vacuum underpressure table with ventilator. Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy With full Documentation. Available immediately.

Year of construction: 1988, condition: ready for operation (used), I sell the flader orbital brushing machine. Model Quickwood Fladder Pgsdjf Rth Topfx Akfsk Working width 1060mm Mechanically adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Denmark Hansen - Hundebol AS

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) Pgodefzkqmspfx Akfsk For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: used, functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, Roller Conveyor Curve / 90-Degree Curve Manufacturer: Soco System Condition: Used Model: Roller Type: 90° Total outside width: approx. 1430 mm Total inside width: approx. 820 mm Total width incl. motor: approx. 580 mm Conveying width: approx. 410 mm Roller pitch: approx. 60 mm Axle spacing: approx. 110 mm Roller type: Plastic Material: Steel/Plastic Color: Galvanized, Light Grey, Orange Includes 2 Soco 0.12 kW motors Stock quantity: 4 units Price per unit Pgodpfx Aeygyhaokfsk The conveyor system was fully operational until disassembly. Condition: Fully functional, with signs of use Ideal for fast material handling Internal item number: 2026020302 Pickup address: Industriestraße 5 (47918 Tönisvorst) Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your materials will glide smoothly to their destination—even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading your goods, we are your experienced partner! We are happy to provide you with a customized quote or advise you regarding concepts or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our extensive network of specialists. We have already successfully completed projects for companies in various sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will work to optimize your operations and material flow efficiently and sustainably. We can also offer fully automated sorting technology and additional components such as picking shelves or containers.

Condition: used, functionality: fully functional, Alsident System Extraction Arms. Pgodpfx Akoupv U Hefjk The extraction arm of the Alsident System brand is designed to keep the breathing atmosphere clean during work. This extraction arm is suitable for both ceiling mounting and for the wall of a work table. Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0505-V00-003, load capacity: 80 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Transfer weight: 80 kg Lift (arms): 1,500 mm EQUIPMENT 1 magazine (20 pallets) 20 pallets, System 3R GPS 240 Clamping plate 20-M10 Modular SPREITZER clamping block/fixed block unit Psdeyfu Rgspfx Akfegk Set-up station with pneumatic swing clamp Zero-point clamping system System 3R GPS 240

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1412-V00-288, load capacity: 50 kg, stroke length: 1,450 mm, TECHNICAL DETAILS Transfer weight: 50 kg Stroke (arm): 1,450 mm Pjdeyfu D Hopfx Akfjgk Magazine: 60 pallets EQUIPMENT Sliding plate for WorkPal 23 pallets, System 3R Macro 70 Mechanical centric vises SPREITZER MZQ 110-60 PA

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 150 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Transfer weight: 150 kg Lift (arms): 1,500 mm MACHINE DETAILS Number of magazines: 2 Capacity per magazine: 12 pallets Psdpfxsyfuwge Akfogk EQUIPMENT 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZS 260-125 A 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZU 170-60 Zero-point clamping system System 3R GPS 240

Condition: ready for operation (used), working width 1300mm rotor with 4 brushes edge brush additional outfeed brush variable regulated feeder variable regulated rotor speed variable regulated brushes speed electric regulation of rotor Pgodpfetzllrjx Akfek connection 380v

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: AYA320NY3006, overall weight: 950 kg, total length: 1,700 mm, total width: 1,650 mm, total height: 2,120 mm, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, Mazzali Intensys Lab Burn-in industrial (climate) oven, including manual Pgodowm Htqopfx Akfek Type: Intensys Lab 12+12HD Code: AYA320NY3006 Year of construction: 2007 Mains connection: 400V Temperature range: -40°C / +180°C (external cooling) Load capacity: 12 plates Oven Dimensions: 72 x 50 x 72cm Dimensions: 170 x 165 x 212 cm Weight: ~950 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 3R-656.31-3P, functionality: fully functional, -NEW- System 3R and Erowa measuring probe. Measuring probe consists of the following parts 1. 1 x ITS50 or Macro HP holder 2. 1 x Renishaw measuring probe with protection against collision in all axes 3. 1 x Renishaw M4 measuring stylus with ball dia 3 or 5 mm 4. 1 x Spring loaded locking screw Pjdev A T Izopfx Akfsgk 5. 4 x Adjustment screws

Condition: used, Year of construction: 2024, clear span: 2,700 mm, Racking system for sale Frame P90 6500x1100x90 – 356 pcs (60 EUR/pc) Beams 2700x100 (2400kg) – 1248 pcs (8 EUR/pc) Beams 3600x125 (2600kg) – 1820 pcs (12 EUR/pc) Frame Jungheinrich Esmena 6500x1100x85 – 116 pcs (55 EUR/pc) Beams 2700x115 (3000kg) – 674 pcs (9 EUR/pc) Pedju H Uzbopfx Akfegk Beams 3600x115 (2400kg) – 576 pcs (12 EUR/pc) Frame NEDCON 6500x1100 – 30 pcs (60 EUR/pc) Beams 2700x110 (3000kg) – 1152 pcs (9 EUR/pc) Beams 3600x130 (2800kg) – 480 pcs (12 EUR/pc)

Condition: excellent (used), System 3R 3R-901-20E compatible 3Refix mandrel Ø20mm System 3R 3R-901-20E compatible 3Refix mandrel Ø20mm, rust-resistant - 3Refix compatible Ø20 mm - Rust-resistant - Recommended tightening torque 4 Nm - Supplied singly Partly new and unused Pgjdpfx Aksw E Hgbefsk

Year of construction: 1995, condition: ready for operation (used), For sell we have whole line. System TM Bison loading machine Weinig Hydromat H 22 B year 1989 System TM Angus unloading 450 - 2500mm lenght 20 - 80 mm height 45 - 160 mm width Pgsdstqdfiepfx Akfsk

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Pgodpfx Akoxa H Ewsfok Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. Podswzmcbepfx Akfegk FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: Pgsdpfx Akjwzl Hxofjk * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H Psdpfswfgbrjx Akfogk ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: as good as new (ex-display), Year of construction: 2015, Ultrasonic Cleaning System It is designed for 10m long heat exchanger with 1.5m diameter and weight of 30 tons. Together with internal mounted rollers and quick chemistry heating system, it is perfect for cooperation with demanding clients. Applications for the use of ultrasonic units - Industrial cleaning - High-pressure cleaning - Petro-chemical activities - Shut-down cleaning activities - Other cleaning where Year of production: end of 2015 Total working hours: 135 for diesel generator, about 40 for ultrasonic transducers From the beginning It was stored in warehouse in perfect conditions All other technical information and price can be sent upon request. Pgsdpfxsuigpmo Akfek This technology is highly recommended for cleaning heat exchangers but also for small parts which high pressure methods can damage. It reduces the periods of shutdowns while cleaning, saves water and sewage.