Used Geronne Plate Wagen for sale (12,672)

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm Pjdeh Axk Iopfx Alwjgt 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1963, cutting length 2500 mm plate thickness 3 mm distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW Psdpfxoul Eixo Alwsgt weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 98095307, Offer 24271 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs. - mot. Rear fence with positioning control 10 - 1000 mm - Front angle fence - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Pneumatic connection 6 bar - Hydraulic drive 400 V / 15 kW - Table height 770 mm Pgedpot Tw Uiefx Alwst - Space requirement incl. back gauge, - approx. W 4050 x H 1600 x D 2450 mm - Weight approx. 5500 kg - with: - E-foot switch - Cutting line lighting - Sheet support - Rear guard with protective grille

Condition: good (used), The scope of delivery includes: 01x printing plate, used Material color: blue Dimensions: approx. 200 x 95 mm Material thickness: approx. 5 mm Number of drill holes: 02 pcs. Pgodpst N T A Usfx Alwot Drill hole Ø: approx. 15 mm Weight per piece: 0.750 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Year of construction: 1985, condition: good (used), 17 rolls, Ø 12 mm plate width: 120 mm plate thickness: 0,1 - 2 mm Pgodpfx Ajbif Edolwst

Condition: new, We have stock for Protac500 the thickness are 8mm and 10mm Pgedpfx Aleph Rmcewot These plates can be used in bulletproof applications requiring armor

Condition: new, three-jaw chuck diameter: 630 mm, STOCKLIST NEW BISON CHUCKS Chucks in Original wooden Boxes ===== 1 x 4344-630-8 1 x 4344-315-11 Psdoqpg Hyopfx Alwsgt 1 x 4334-630-8 1 x 4334-500-6 1 x 3204-160 1 x 4305-800 (JAWS) 1 x 3244-400-8 1 x 3544-400-11 3 x 4344-400-6 1 x 3704-250-6 1 x 4344-250-6 1 x 3514-250-6 1 x 3744-400-11 1 x 3704-400 1 x 3544-400-8 1 x 3245-400-8 2 x 4334-400-8 2 x 4344-400-8 1 x 3434-315-8 1 x 4344-200-6 1 x 3704-315 1 x 4344-250-8 1 x 3204-200 1 x 3234-200-5 Please always check if still available! Delivery: EXW – NL

Condition: used, length 450 mm width 140 mm height 100 mm 2 magnetic plates with control unit Pgedpfx Alezcghrjwst approx. 450 x 140 x 100 mm

Condition: used, length 900 mm Podpfx Alozcgkyowsgt width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9061

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm Pgjdpfx Aezf Hkdslwst - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T Pgedpfx Alezwxazjwot

Condition: used, Steel floor plates Length: 2210 mm Pgjdpezwxcvofx Alwjt Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: used, Druckplatten Biegeeinrichtung für Heidelberg SM52 Format - Plate Bending device Heidelberg SM52 Size Druckplatten Biegeeinrichtung - Plate Bending device NELA GS-Biegegerät Baujahr / Year 1997 - Serial-No. 1144/41 Druckplatten Biegeeinrichtung für Heidelberg SM52 Format Plate Bending device Heidelberg SM52 Size Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Pjdpfx Aszr N Tuslwsgt

Condition: good (used), functionality: fully functional, overall weight: 810 kg, total width: 1,000 mm, total length: 1,500 mm, plate height: 350 mm, machine base height: 670 mm, space requirement width: 1,000 mm, space requirement length: 1,500 mm, space requirement height: 1,190 mm, -KOM 3183- Here, we offer a mounting plate. The mounting plate is in good used condition. The feet have a thread, which allows the height to be adjusted between approximately 600 mm and 670 mm. Technical data: Pjdpfx Alszwc E Iewsgt Table dimensions (without feet): approx. 1000 mm x approx. 1500 mm x approx. 520 mm Foot height (min.): approx. 600 mm Foot height (max.): approx. 670 mm Foot diameter: approx. 350 mm Total weight: approx. 810 kg (including two pallets)

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Pgsdpfjztckiox Alwst Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Pgsdpfx Aszty Hnelwst Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Operating over pressure: 24 bar Desing temperature: 104 °C Length: 1,6 m Width: 0,85 m Pgsdpfx Aezty Tuelwot Height: 2,2 m Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Condition: new, number of rollers: 4, number of digital displays: 3, Equipment: cone bending device, hardened rollers, swiveling upper roller, – 4 rolls – Capacity: 1270 x 4/5 mm – Pre-bending capacity: 1270 x 3/4 mm – Hardened rolls – Cone rolling capability – Top roll diameter: 130 mm – Bottom roll diameter: 130 mm – Side roll diameter: 130 mm – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swiveling – Steel construction ST-52 – Overload protection Pjdpfoxytlqjx Alwjgt – Documentation – 400 V

Condition: good (used), Filter plates for chamber filter press, chamber filter plates for chamber fitters presses. Format 1000 x 1000 Psdped Ezfmefx Alwjgt The Chamber filter plates made of Polypropylen, is characterized by excellent chemical resistance and easy handling, due to its low weight, The plates are cleaned befor delivered. (Example photo) We always have good second-hand and new chamber filter plates from stock Gladbeck for your chamber filter press in all sizes. You are welcome to ask us for your requirements.

Condition: used, Used Membrane Chamber Filter Plates 1000 x 1000 PP approx. 190 on stock Pgodpfx Aobppv Dolwet

Condition: used, Used Chamber Filter Plates PP Podebppvyspfx Alwjgt 1000 x 1000

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total height: 350 mm, total width: 70 mm, total length: 120 mm, overall weight: 7 kg, Height and scribing measuring device with dial indicator and double counter Product information: "300mm double-column height scriber with 0.01mm dial indicator, fine adjustment, carbide scribing pin, stainless steel - Metav IndustryLine" The concise summary: The double-column height scriber, 300 mm, combines robust construction with fine adjustability and high reading accuracy, enabling precise scribing and repeatable measurements. Benefit from the dial indicator with 0.01 mm resolution, the carbide scribing pin, and the stable double-column guidance. Order the device directly from Metav Tools or contact our consulting team for technical details. Double-column height scriber, 300 mm, with fine adjustment and round scribing pin The double-column height scriber, 300 mm, is a precise scribing and measuring device for workshops and production, designed for reproducible height measurements and fine adjustment. Double-column construction for high stability 0.01 mm dial indicator for fine readings Fine adjustment for exact positioning Carbide pin for low-wear scribing Robust construction made of stainless steel Precision that pays off in results The integrated dial indicator with 0.01 mm resolution provides the finest display values, while the mechanical accuracy of ±0.03 mm meets the industrial requirement for tolerances. The combination of smoothly guided columns and fine adjustment allows scribing with minimal deviation, reducing setup times and scrap. Users benefit particularly where small height differences need to be transferred repeatedly and precisely. Podpoxpqh Iefx Alwsgt User-friendly design and safe handling increase efficiency The device features a handwheel and a sensitive adjustment mechanism that enables the exact positioning of the round scribing pin. The double counter function counts separately for upward and downward movements, thus supporting the recording of travel distances. These controls are ergonomically designed, reducing fatigue during repeated measuring operations and increasing process reliability. Durability through material selection and design details The stainless steel body ensures corrosion resistance and rigid guidance, while the carbide scribing pin ensures a long service life with repeated use. The clamping system in the 9x21 format ensures secure fixing of the measuring spindle, so that measurements remain reproducible and the machine running time can be used effectively. Application areas and user benefits clearly defined This precision instrument is suitable for metalworking, toolmaking and precision engineering, especially where exact scribing and repeatable height measurements are required. The double-column height scriber is aimed at workshops and production lines that value consistent quality and at the same time want to minimize operating time.

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Pgjdpfx Alszinz Sewot Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Pedpfsznn Hlox Alwogt Weight: 80 kg Good condition

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures. Pjdpfsziww Njx Alwsgt