Used Drilling and milling for sale (124)

Condition: used, Year of construction: 2009, x-travel 3.000 mm y-travel 2.500 mm z-travel 2.475 mm w-axis 800 mm rotary table Juaristi MG-12 Rotary table surface 2.000 x 2.500 mm T-slots 11 T-slot - width 170 mm table weight 8.000 Kg table rotation B- Achse – 0,001 ° Control HEIDENHAIN i TNC-530 diameter of quill 130 mm speed 3.000 U/min tool taper ISO 50 DIN 69871/1-B Iswdpvq milling head swivelling +/- 2,5/2,5 Grad spindle drive 30 kW transmission ratio 2 speeds: 0-2.500 U/min boring spindle D`ANDREA UT5-800-S mm/min diameter 800 mm cross travel 250 mm Tools changer 30 pos. Internal cooling system 20 bar Chip coveyor Inkl. handwheel HEIDENHAIN HR-420 weight of the machine ca. 45 t dimensions of the machine ca. 9.800 x 7.320 x 5.500 m -TS-3 head, TS-5 column and longitudinal bed INCLUDED: - Part touch probe RENISHAW RMP-60 - External coolant - 20 bar Internal coolan - protecting guards - mobile operator platform for control panel - Chip Conveyor - Handwheel HEIDENHAIN HR-420

Condition: excellent (used), SERRMAC Drill-Drill MOD TCS 40 Drilling capacity 40 mm Spindle taper 4 CM Spindle sleeve stroke 145mm Longitudinal x-axis stroke 585mm Y-axis transverse travel 240mm Working table dimensions 800x255 mm Distance column-spindle center 293mm Spindle revolutions 100÷1,620 rpm. (rpm) Spindle motor power 1.5 to 2.2 Kw Feoopfxqz Belt transmission type Feed rate 0.05 - 0.1 - 0.2 mm/revolution Spindle rotation speed 80 - 1620 rpm/1' Weight 800 kg

Condition: used, Year of construction: 1971, bore capacity in steel (diameter): mm x-travel: mm y-travel: mm Gj8Se0 max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 1700 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / 17step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with 17 speeds Equipment: optical fine measuring device/measuring system Heidenhain for axes X/Y/Z/C-table hydraulics machine feet/footplates control panel with boom

Condition: used, Travel distance X-axis: 640 mm, Travel distance Y-axis: 390 mm, Travel distance Z-axis: 500 mm, Spindle mount: MK 3, Quill stroke: 100 mm, Model making drilling and milling machine made by BOKÖ Type and year of manufacture unknown Technical data: Longitudinal table travel = X manual 640 mm Transverse table travel = Y manual 390 mm Spindle vertical travel = Z manual 500 mm Vertical head stroke = W manual 200 mm Quill stroke 100 mm Table size 750 x 450 mm Spindle holder MK 3 Bojvbt3Mtfy 10 speeds 90 - 2800 rpm Dimensions L x W x H 1100 x 1200 x 1800 mm with - tiltable and height-adjustable head used, in good condition

Condition: used, Year of construction: 2002, bore capacity in steel (diameter) 20 mm x-travel 450 mm y-travel 260 mm Control Heidenhain TNC 124 w-axis 450 mm z-axis 120 mm tool taper SF 32 Quickchange-System turning speed range - stepless 100 - 9.200 U/min table surface area 770 0 320 mm table load 0,2 t feed range - table XY 1-2.000 mm/min Uadq8Jdiqh feed for quill 1: 0,02-0,30 mm/U total power requirement 10 kW weight of the machine ca. 1,3 t dimensions of the machine ca. BTH 1,6 x 1,55 x 2,33 m

Condition: used, Year of construction: 1978, Ref. -No.: 10400 Manufacturer: SCHIESS FRORIEP Type: FBT 150/240 Year of construction: 1978 Type of control: Digital Storage location: Mülheim an der Ruhr Country of origin: Germany Machine-No.: 130XX Major overhaul: 2000 Support sleeve diameter: 390 mm X-Travel: 20000 mm Y-Travel: 3700 mm Z-Travel: 1400 mm V-axis travel: 1000 mm C-Axis: 360 ° Bed length: 21500 mm Bed width: 5000 mm Bore Spindle Diameter: 150 mm Working Spindle Diameter: 1400 mm Milling Spindle Diameter: 240 mm Turning Speed Range - Stepless: 2 - 795 RPM Turning Speed Range - Stepless: 3 - 1800 mm / min Rapid Traverse X-Axis: 1800 m / min Rapid Travel Y-Axis: 1400 m / min Creep Feed: 75 mm / min Drive Capacity - Spindle Motor: 51 kW Weight Of The Machine Ca.: 100 t Bore Depth: 1400 mm Further information: - Floor plates 5,000 mm wide x 21,500 mm long - Turntable is available 2,000 mm x 1,800 mm + V-axis 1,000 mm Dpth8Z Currently, 15-meter-long parts are being produced on the machine for the railway industry. The machine is still in production and has always been maintained. A viewing under power is possible by appointment.

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm Ccck0Lc >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: new, Special offer price for stock goods! Only while stocks last! Price net ex stock, free loading. Drilling capacity in steel: 32 mm drilling capacity in cast iron: 40 mm cutter head max.: 80 mm throat: 220 mm spindle speed: (12) 75 - 3200 rpm spindle adaptor: MK 4 quill stroke: 125 mm table size: 800 x 240 mm travel (x / y): 555 / 225 mm milling head swiveling: -90° to +90° distance spindle / table: 60 - 485 mm height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1,1 / 1,5 kW (400 V) Motor input power S6 40%: 1,5 / 2,2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Weight approx.: 287 kg * without underframe 8Ugvmcyjc Features: - Easy and fast speed change by gear selector switch. - Versatile application possibilities such as drilling, milling, thread cutting,... -High running smoothness due to ground gear wheels running in an oil bath - Right- and left-hand rotation device for thread cutting - Spindle sleeve adjustment by means of handle, fine adjustment by means of handwheel - Dovetail guide for x-, y- and z-axis, adjustable via wedge bars - Milling head swivels on both sides for angle drilling, milling chamfers, etc. - Massive large cross table, precisely surface machined - Optimum price-performance ratio for the cost-conscious user Scope of delivery: Keyless drill chuck 3 - 16 mm / B 16 Drill chuck mandrel MK 4 / B 16 tightening spindle M 16 Reducing sleeve MK 4 / 3 Combination arbor MK 4 / 27 mm Height adjustable protective cover Tapping device LED machine light Digital quill stroke display Blade protection cover Longitudinal measuring scale Operating tool

Condition: new, 1PC NEW/OPEN BOX HBM LOAD CELL / RTNC3/10T Uetystb839

Condition: used, Year of construction: 1998, Machine/vehicle number: 0702-240019, Cross transport tractors as a chain towing system for the cross transport of sectional steel in steel construction and steel trade. These stable cross tractors were used on a Kaltenbach sawing and drilling line. Rqv7Ph3Rf7 4 cross tractors as a chain drag system with anti-slip bars, incl. 1 x motor and 3 x shafts, length 4430 mm, height 670 mm

Condition: used, bore capacity in steel (diameter) 28 mm x-travel 400 mm y-travel 285 mm turning speeds 45-4000 U/min total power requirement 3,6 kW weight of the machine ca. 1,4 t Uadqapnv97 dimensions of the machine ca. LBH 2,0 x 1,4 x 2,1 m - POS+MAT table - ALBRECHT tool quick change system - Vices

Condition: ready for operation (used), Year of construction: 1974, Main Drive Spindle speed range 14 – 1400 Spindle motor power 7,5 kW Tool taper ISO 40 Number of axis 4 Cqysvt9Khy Movement X-Axis Movement 1250 Y-Axis Movement 1120 Z-Axis Movement 1250 Table Outer length 1000 Outer width 1120 Table load 3000 kg This 4-axis TOS W9 boring machine was manufactured in 1974 and refurbished in 2016. It features a spindle diameter of 90 mm, ISO 40 taper, and a spindle speed range of 14-1400 rpm. The table measures 1000x1120 mm with a load capacity of 3000 kg. Ideal for precise heavy-duty work, the TOS W9 machine we have for sale represents a robust addition to any workshop. For more information about this boring machine, please reach out to us. Application Types Boring

Condition: good (used), Year of construction: 1998, Operating hours: 9,691 h, x-path 700 mm, y-path 315 mm, z-path 495 mm Table clamping surface 1,230 x 410 mm Control Heidenhain TNC 415B Tool changer: Number of tool positions 32 Pos. Tool holder SK 30 B8Eomuykw0 Measuring probe, 4e axis Spindle hours: 9691 h From research workshop, not a production machine. Measuring probe and tools included

Condition: new, Technical data: Drilling capacity in steel: 50 mm Tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Bowkhbnrn Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: excellent (used), Gillardon column drilling / milling machine GK 40 VE MK 4 with 2-axis digital cross table 250 x 800 Cross table travel : X 400 Y 300 Infinitely variable speeds 60 -1600 Feed rate 3 compartments Thread cutting device Quill clamping for easier milling work Quill stroke 180 Projection 350 Distance table spindle max. 700 Drive 2.2 KW Column diameter 160 Dimensions : H min. 1.8m max. 2.5m D 1.2m W 1.0m Weight approx. 750 kg Quick-action drill chuck, quick-change system with several holders, lighting, coolant system , 2-axis digital . Condition: very good , runs clean and quiet , concentricity and spindle play ok. Ubswt2F30Z can of course be inspected under power free loading D - 88433 Schemmerhofen

Condition: new, Year of construction: 2024, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Bzg7Smab79 Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: used, taper MK ja Cso0Ve7Qoi

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand Heidenhain Model TNC426 Main Drive Spindle speed range 3500 Tool taper 50 ISO Movement X-Axis Movement 1600 mm Y-Axis Movement 920 mm Z-Axis Movement 950 mm Table Outer length 850 mm (extends to 1600 mm with supports) Outer width 850 mm Table load 3000 kg (5000 kg with supports) Cpaoe8Gq38 Media Chip conveyor Yes This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine. Application Types Boring

Condition: ready for operation (used), Year of construction: 2001, Operating hours: 93,713 h, Functionality: fully functional, Machine/vehicle number: 14501587, Feed length X-axis: 505 mm, Feed length Y-axis: 355 mm, Feed length Z-axis: 610 mm, Spindle speed (max.): 18,000 rpm, Spindle mount: MK 3, Total length: 2,300 mm, Total height: 2,500 mm, Total width: 2,000 mm, Table length: 920 mm, Workpiece weight (max.): 300 kg, CNC vertical machining center, manufacturer: Fehlmann, type: Picomax 60-M, year 2001 Ccnfx8Xzs8 Control: Heidenhain TNC 430 Tool magazine with 24 places Space requirement (width x depth) 3.5 x 2.7m Clamping area (length x width) 920 x 380mm Tool holder SK30 Table load 300kg Accessories: AT 125 CNC dividing head, handwheel

Condition: new, Special offer price for stock goods! Only while stocks last. Price ex stock plus VAT. Picture shows machine with base frame, this is not included in delivery! drilling capacity in steel: 32 mm drilling capacity in cast iron: 40 mm cutter head max.: 80 mm throat: 220 mm spindle speed: (12) 75 - 3200 rpm Bixrganvkh spindle adaptor: MK 4 quill stroke: 120 mm quill feed rate: (3) 0.10 / 0.18 / 0.26 mm/rev. table size: 800 x 240 mm travel (x / y): 555 / 205 mm milling head tiltable: -60° to +60° distance spindle / table: 60 - 485 mm height adjustment milling head: 425 mm T-slot size: 14 mm motor output power S1 100%: 1,1 / 1,5 kW (400 V) Motor input power S6 40%: 1,5 / 2,2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 Weight approx.: 308 kg * without underframe Features: - Powerful 2-stage motor, speed range 75 - 3200 rpm. - Milling head swivels on both sides for angle drilling, milling of chamfers etc. - High safety due to height-adjustable chuck guard with microswitch - Automatic spindle sleeve feed and thread cutting device as standard equipment - Dovetail guide for x-, y- and z-axis, adjustable via wedge bars - Simple and fast speed change by means of gear selector switch - Digital display for quill infeed as standard equipment - High stability due to dovetail guide of the gear head - Spindle sleeve adjustment by means of a handle, fine adjustment by means of a handwheel - Stable and vibration-free cast iron design Scope of delivery: - 3-axis digital display i200 with LCD display - Quick-action drill chuck 3 - 16 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - tightening spindle M 16 - Reducing bushing MK 4/3 - Combination arbor MK 4 / 27 mm - Height adjustable protective cover - Automatic quill feed - LED machine light - Digital quill stroke display - Thread cutting device - Blade protection cover - Longitudinal measuring scale - Operating tool

Condition: used, Year of construction: 1970, x-travel 180 mm Csotgxq3Ly . Year 1970

Condition: ready for operation (used), Year of construction: 2017, Operating hours: 4,080 h, General Data Measurements width 3813 mm Measurements depth 12593 mm Measurements height 3081 mm Machine weight 10000 kg Controller Brand Mitsubishi Model M700V/M70v Series Main Drive Number of spindles 1 Spindle speed range 750 - 4000 Number of strokes 3 Number of axis 3 Movement X-Axis Movement 7000 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm This ERLO TH-40 (2017) Drilling machine was manufactured in the year 2017 in Spain and has 4080 production hours. It is equipped with a Mitsubishi M700V/M70v Series contoller (Spindle speed: 750 - 4000rpm). Application Types Drilling Cxmxcyep7S

Condition: new, Special offer price for stock items. Only while stocks last. Price ex stock, plus VAT. Drilling-milling machine Bernardo FM 50 HSV with digital display Underframe not included in delivery! Drilling capacity in steel: 32 mm drilling capacity in cast iron: 40 mm cutter head max.: 80 mm throat depth: 220 mm spindle speed: (12) 75 - 3200 rpm spindle adaptor: MK 4 quill stroke: 120 mm quill feed rate: (3) 0.10 / 0.18 / 0.26 mm/rev. table size: 800 x 240 mm travel (x / y): 555 / 225 mm milling head tiltable: -60° to +60° distance spindle / table: 95 - 485 mm height adjustment milling head: 390 mm T-slot size: 14 mm lifting motor: 90 W motor output power S1 100%: 1,1 / 1,5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 970 x 1460 mm Weight approx.: 322 kg Features: - Versatile applications such as: Slot milling, face milling, spindling, etc. - Standard with automatic spindle sleeve feed and thread cutting device - Comfortable height adjustment of the milling head by means of lifting motor - Digital display for the quill feed as standard - Dovetail guide for x-, y- and z-axis, adjustable via wedge bars - High running smoothness due to ground gear wheels running in oil bath - Milling head swivels to both sides for angle drilling, milling of chamfers, etc. - High stability due to dovetail guide of the gear head - Spindle sleeve adjustment by means of handle, fine adjustment by means of handwheel - Powerful 2-stage motor, speed range 75 - 3200 rpm - High safety due to height-adjustable chuck guard with microswitch Scope of delivery: - 3-axis digital display ES-12 V with LCD display - Quick-action drill chuck 3 - 16 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - tightening spindle M 16 - Reducing bushing MK 4 / 3 - Combination arbor MK 4 / 27 mm - Height adjustable protective cover - Automatic quill feed - Lift motor for milling head Hvddhvypc - LED machine light - Digital quill stroke display - Thread cutting device - Blade protection cover - Longitudinal measuring scale - Operating tool Part number: 02-1096

Condition: used, Year of construction: 1979, content Daten Folgen cbm Crws20Gvz8

Condition: used, Year of construction: 2008, weight 2085 kg Cp377Nlz83 range L-W-H 1560 x 1690 x 2600 mm