Used Hako Self-Propelled Working Machine for sale (75,424)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Ljdpfx Afsy Uiyveuoac Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System Lajdpfx Ajy Ugtajfuoc The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Ledpfoy Uc Nkox Afujac Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Lsdpfx Afsv S Dk Sjueac Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. Laedpfsv S Dihex Afuec All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Lajdpfx Afov Sa I Tsuoc In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Lodpfx Ajzdazbefueac Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Lajdpfx Ajzdayqsfujc Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), Minipack Torre Mailbag Packaging Machine This machine is in excellent condition and ready for production. Lasdpfx Afozdavxjuoc The photos show the actual product. Made in Italy. Manufacturer’s description: The Mailbag is a compact digital bagging system, ideal for packaging brochures, newspapers, and books. Powered by a single-phase power supply (airless), it’s easy to use with wheels, and the system can be easily moved from one location to another with minimal fuss. A product, such as a magazine, inserted into the feeder activates a photocell, detects the package, and moves the bag and product into the sealing system. A combination of transverse and longitudinal seals closes the package and creates a seal for the next product. The finished package gently falls into the receiving hopper at the bottom of the machine. Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width: 160 mm Maximum package width: 250 mm Min. package length: 100 mm Maximum package length: 360 mm Maximum film thickness: 30 microns Machine dimensions: 600 mm x 840 mm x 1050 mm Weight: 144 kg Power supply: 230V Power consumption: 0.6 kW

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: Lsdjzdiz Nepfx Afuoac High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: excellent (used), Year of construction: 2018, operating hours: 3,357 h, functionality: fully functional, overall weight: 6,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, Equipment: ABS, additional headlights, air conditioning, all wheel drive, differential lock, immobilizer system, low noise, parking heater, soot filter, traction control, truck registration, The authorized Subaru dealer in Łaziska Górne now offers a professional HAKO Citymaster 2200 road sweeper from 2018, which meets the Euro 6 emission standard. The machine comes from its first owner in Denmark and has been regularly serviced and has a complete set of documents. The sweeper has been inspected and tested by us, and all working functions are in good order. The HAKO Citymaster 2200 is a compact, maneuverable, and very practical municipal machine, ideal for use in cities, on sidewalks, streets, squares, parking lots, industrial plants, and municipal areas. Thanks to its small dimensions and excellent maneuverability, it can be used practically anywhere, even in tight urban spaces. The machine is equipped with two front working brushes, a spraying/dust suppression system, a suction system, hydrostatic drive, and an efficient VM 3.0 Euro 6 diesel engine with approximately 109 hp / 80 kW. The debris tank with a capacity of approximately 2.2 m³ allows for efficient operation without frequent emptying. WE ALSO HAVE OTHER SWEEPERS ON OFFER: JOHNSTON 158T - 2009 - approximately 5000 operating hours JOHNSTON C200 - 2016 - approximately 5000 operating hours With the price, you receive a complete set of documents for registration. We offer all forms of payment: Leasing, credit, cash, and bank transfer. You can take the machine directly from the showroom immediately upon payment in cash or by bank transfer. In addition, we offer insurance - we will calculate the cheapest premium for any vehicle - CHECK US OUT! We also deliver paid cars and trucks to the address you specify throughout Europe. For more information about our services, please contact our sales representatives. Equipment: Heated driver's seat Radio Air conditioning + heating Pneumatic seat Fabric upholstery Technical data: Brand: HAKO Model: Citymaster 2200 Year of manufacture: 2018 First owner: yes Emission standard: Euro 6 Engine: VM 3.0 diesel Engine capacity: approx. 2970 cm³ Engine power: approx. 109 hp / 80 kW Torque: approx. 420 Nm Drive system: hydrostatic Transport speed: up to approx. 62 km/h GVWR: 6000 kg Unladen weight according to documents: 3816 kg Laedpjzf E Sgsfx Afuoc Approximate payload: 2184 kg Cabin: 2-seater Working system: 2 front brushes Working width: approx. 2500 mm Debris tank: approx. 2.2 m³ Water tank: approx. 340 l Dust suppression system: spraying / brush spraying Suction system: suction nozzle Brakes: disc Tires: 225/75 R16C Application: sweeping streets, sidewalks, squares, parking lots, industrial plants, and municipal areas The machine has been inspected and tested. All working functions are in good order. We have a complete set of documents. The stated price is net and applies to export and to companies. A significant discount is available for individual customers - We invite you to contact us directly by phone to get your best price :)

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. Lasdpjq N Ud Iefx Afuoc 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: used, Year of construction: 2008, operating hours: 2,278 h, functionality: fully functional, drive type: Treibgas, Sweepers Condition: Ready for use and fully functional Technical condition: Good Ljdpfx Aswgtq Aefuoac

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, overall weight: 122 kg, fuel type: electric, Equipment: second-hand vehicle warranty, HAKO SWEEPMASTER B650 SWEEPER NEW SONNENSCHEIN 12V 76Ah GEL BATTERY Manufactured in 2020 Ljdpfx Afszdrmzjujac A new cylindrical brush combined with a new side brush provide excellent sweeping results. New rubber guards around the main roller ensure dust-free sweeping. High surface coverage of up to 3,525 m²/h. The machine is in perfect condition, both visually and technically. The device has undergone a complete, meticulous technical overhaul. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: battery Theoretical capacity (m²/h): 3525 Working width (mm): 505 Working width with 1 side brush (mm): 705 Dustbin capacity (l): 35 Working speed (km/h): 5 Filter surface area (m²): 1.5 Weight ready for use (kg): 122 Dimensions (L x W x H) (mm): 1200 x 685 x 715 INCLUDED: NEW SONNENSCHEIN 12V 76Ah GEL BATTERY NEW cylindrical brush NEW side brush (antistatic bristles - MIX) Air filter New roller guards Waste container

Condition: reconditioned (used), operating hours: 735 h, functionality: fully functional, empty load weight: 784 kg, Equipment: second-hand vehicle warranty, HAKO JONAS 1200 D SWEEPER This machine has been fully serviced with only 735 hours on the clock. A new cylindrical brush, combined with new side brushes with added wire, ensures excellent sweeping results. The sweeper is equipped with road lighting. A reliable and very fuel-efficient LDW502 diesel engine. A new 12V 50Ah starter battery. A high-performance dust extraction turbine and new dust guards around the main brush prevent fine dust and dirt from being raised after sweeping. The machine has a large debris flap for collecting larger debris. The machine has undergone a thorough overhaul. Operating fluids and parts such as bearings, drive belts, and dust guards have been replaced. Each machine we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: JONAS 1200 D Drive: LDW502 diesel engine Theoretical capacity (m²/h): 13,200 Sweeping width (mm): 800 Sweeping width with side brushes (mm): 1470 Hopper capacity (l): 130 Sweeping speed (km/h): 9 Dimensions (L x W x H) 1998 mm x 1142 mm x 1520 mm Machine weight (ready to use) ~ 784 kg INCLUDED: NEW cylindrical brush - PPL bristles NEW side brush - PPL bristles + ACC (wire) (2x) NEW main air filter NEW roller guards NEW 12V 50Ah starter battery Full engine filter and oil service Road lighting Hydraulically lifted 130L waste container KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned The Jonas 1200 D sweeper is the perfect machine for efficient and economical sweeping of multi-story parking lots, warehouses, production buildings, and outdoor areas Combustion engine power ensures high flexibility Laedpfjzdq Uksx Afuec Large working width (1470mm) ensures high area coverage Highly legible and intuitive control panel

Condition: used, Thread rolling machine UPWS 25. Laodpjzd Rf Nefx Afujc

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, working width: 38 mm, area performance: 1,500 m²/h, overall weight: 80 kg, warranty duration: 12 months, input voltage: 24 V, tank capacity: 16 l, total width: 470 mm, total length: 800 mm, water tank capacity: 16 l, battery capacity: 25 Ah, rotational speed (min.): 180 rpm, empty load weight: 42 kg, We have for sale compact scrubber dryers: Scrubmaster Hako B12. Condition of the machine: Very good Year of manufacture: 2021 All machines purchased from us come with a 12-month WARRANTY. The machine is in very good condition, both visually and technically. It has undergone a comprehensive and detailed overhaul, making it fully functional and ready for use. We present each of our machines with authentic photos – you are buying the exact machine you see in the photograph. TECHNICAL DATA: Working width (mm): 380 Suction width (mm): 470 Performance (m²/h): 1,500 Number of brushes: 1 Capacity of the clean water tank (l): 16 Capacity of the dirty water tank (l): 22 Lajdpfx Aozdttvofuoc Weight without batteries (kg): 40 Weight of the machine ready for operation (kg): 80 Power (kW): 0.54 The set includes: Gel batteries 12V 25Ah (2x) Disc brush - medium hardness Drain hose Suction hose Suction strip with oil-resistant rubbers

Condition: used, mileage: 48,400 km, power: 55 kW (74.78 HP), first registration: 07/2017, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, color: blue, gearing type: automatic, number of seats: 1, Year of construction: 2017, Equipment: air conditioning, Vehicle No.: 472-25 HAKO CityMaster 1600 REINEX Weed Control with Hot Water/Steam Interchangeable body, winter service possible, hydraulic connections Emission standard: 97/68/EC First registration: 07/2017 * 48,400 km Ledpfxsyadk Sj Afusac * Engine operating hours: 5,623 h * REINEX HDA/S 100-0207-17 * Hot water burner operating hours: 2,192 h * 100–200 bar in combination with mobile hot water high-pressure cleaner * Steam range: 150°C steam setting with max. 10 bar * Water tank capacity: 1,000 L * Spray lance * Air conditioning * All-wheel drive * Volkswagen 4-cylinder inline engine * 2-speed automatic/hydraulic transmission * Maximum speed 40 km/h * Camera * Wheelbase 1,600 mm * Length / Width / Height: 3,829 mm / 1,200 mm / 1,975 mm * German documents Inspection possible at any time during our business hours, test drives by appointment! For export sales, a deposit will be retained and refunded upon receipt of the certificate of export. Company or advertising logos on vehicles may have been digitally edited in the photos. No guarantee is given regarding the function of accessories. All details without warranty – subject to errors, changes, typos, and prior sale. Vehicle descriptions are expressly not guaranteed characteristics. Please refer to our general terms and conditions and take note of these.

Condition: used, mileage: 55,087 km, power: 80 kW (108.77 HP), first registration: 07/2021, fuel type: diesel, overall weight: 6,000 kg, next inspection (TÜV): 09/2026, color: blue, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 3,980 mm, total width: 1,430 mm, total height: 2,090 mm, Year of construction: 2021, Vehicle No.: 470-25 HAKO Citymaster 2200 Sweeping Machine * First registration: 07/2021 * Mileage: 55,087 km * Operating hours: 5,707 h * Steel brushes * Automatic transmission * Air conditioning * Unladen weight: 3,760 kg * Selectable all-wheel steering * German machine Viewing is possible at any time during our opening hours; test drives by appointment only! Ljdpfsyadliex Afujac For export sales, a deposit will be retained, which will be refunded upon receipt of the certificate of export. Company or advertising logos on the vehicles may have been digitally altered in the photographs. No guarantee is given for the functionality of extras. All information is provided without guarantee. Errors, changes, typographical mistakes, and prior sale reserved. Vehicle descriptions do not constitute guaranteed characteristics. Please refer to our general terms and conditions and ensure you are familiar with them.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 515 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CL H TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2019 with 515 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush for use on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE Ledpfx Afozcyb Sjusac KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 290 h, functionality: fully functional, working width: 430 mm, area performance: 1,700 m²/h, overall weight: 179 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO SCRUBMASTER B30 TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2019 with 290 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's contour. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1700 Tank capacity (l): 30/30 Machine weight, ready to use (kg): ~179 Power output (kW): 1.13 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE Lasdjzcxk Sopfx Afujc KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 628 h, functionality: fully functional, working width: 430 mm, area performance: 1,900 m²/h, overall weight: 190 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO SCRUBMASTER B30 CL TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2017 with 628 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Squeegee working width (mm): 760 Theoretical capacity (m²): 1900 Working speed (km/h): 4.5 Tank capacity (l): 30/30 Weight (ready to use): ~190 Power (kW): 1.31 INCLUDED: NEW BATTERIES 12V 85Ah SIAP GEL BATTERY (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very clear and intuitive. Laedpfx Ajzcvl Tsfuoc

Condition: new, functionality: fully functional, Year of construction: 2026, BPM-120 CRACK SEALING MACHINE TICAB LLC (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces: the BPM-120 crack and joint sealing machine. Main Application: The BPM-120 fills cracks and joints on asphalt roads, parking lots, sidewalks, airfields, and other road infrastructure facilities. Designed for small- and medium-scale projects! Ljdpsvrialefx Afuoac BPM-120 Technical Specifications: • Bitumen emulsion tank: 120 liters • Bitumen pump: capacity up to 10 l/min, working pressure up to 5 bar • Feed system: manual spray wand + 2 m hose (non-heated) • Mixing: manual • Bitumen heating system: diesel burner • Temperature control: automatic (maintains preset temperature) • Purge system: allows cleaning of hose and spray wand after work is completed Thoughtful design for your comfort and safety! Advantages of the BPM-120 model: • Compact size and mobility • Easy to maintain and operate • Direct heating with diesel fuel (no oil layer) • Energy-efficient fuel consumption • High-quality crack and joint sealing ensures pavement durability • Simple construction guarantees reliability in operation Price: • €13,000 without trailer • €15,200 with trailer Delivery Terms: • Production time: up to 20 business days after order confirmation • Warranty: 12 months • Delivery: from the manufacturer’s warehouse • Support: manual, technical assistance, video instructions Contact us today for a personalized consultation! Choose equipment that delivers results — send your inquiry now!

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS Laodpfx Ajfgl Aqjfujc MADE IN ITALY

Condition: used, BROACHING MACHINE Lajdpfx Ast Hr Dfefusc