Used Indramat Kds 1.3-150-300-W1 for sale (22,098)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 490 kg, Reversible vibratory trough. Little run Hjdpfx Ajq Ukcijfhsr

Year of construction: 2018, condition: excellent (used), Detection head 350 x 200 mm Useful height 145 mm Hedjtwq I Ejpfx Afhor Intralox belt 1350 x 300 mm With ejection of defective products in closed container Year of construction 2018

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaner, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL – similar to, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Moses 60/200 | 60 l/min. at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min. at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min. at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min. at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min. at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min. at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min. at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions of models with 27.5 kW without water tank LxWxH: approx. 910x1,220x1,200 mm Dimensions of models with 35.5 kW without water tank LxWxH: approx. 1,240x1,310x1,300 mm Empty weight without water tank: approx. 550-700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min. - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water - Cylinders: 3 and 4 - Max. power: 37-48 hp (27.5-35.5 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Pulley and belt CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low lubricating oil pressure - LED indicator for clogged air filter - LED indicator for speed measurement - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROL: - Winding/unwinding of hydraulic hose reel; - On/off bypass; - Speed control +/-; - Emergency stop button; - Switching to remote control; INSTALLED ALARM: - Low water level protection against dry running of the high-pressure pump with automatic shut-off function. Hodpfxsf Ar Exe Afhor SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: hydraulically operated hose reel, swiveling by 180° - Material: Stainless steel - Capacity: max. 100 m ½“ - Hose: 80 m ½“ high-pressure hose (included) - Hose guidance: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) FUEL/OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunction remote control IMET; - On / Off engine; - On / Off bypass; - Speed control +/-; - Winding / unwinding of hydraulic hose reel; - Emergency stop button; - Battery charger for remote control; - 500, 800 or 1000 l water tank;

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. Similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz Hodpfjhf Na Sox Afher CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

Year of construction: 2003, condition: used, We offer this used MAPLAN MHF 1500/300E Maplan MTF 1500/300 injection moulding machine, year 2003. Machine type: MHF 1500/300E Serial number: 20301386 Year of manufacture: 2003 Output power: 73 kW Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Controller type: B&R - CP152 Panel type: Maplan PC 4000 - DOS Year of manufacture: 2003 Condition: ready for operation (used) Hodpfx Asyf E Rwjfhjr Operating hours: 78,154h Description: Clamping force: 3000 kN Shot volume: 1500 ccm Tie bar distance, crosswise: 600 mm Tie bar distance, lengthwise: 600 mm Heater plate size (W/L): 550 / 630 mm Daylight between open platens: 640 mm Connected load: 73 kW Power supply: 3x 400V / 50Hz Machine dimensions (LxWxH): approx. 4.80 x 1.80 x 2.30 m Machine weight: approx. 7500 kg Input current type: standard industrial three-phase electrical connection Equipment: documentation If you have any further questions or require more information, please send us a message or call us.

Year of construction: 2004, condition: used, We offer this used MAPLAN MHF 1500/300E1 Maplan MTF 1500/300, year of manufacture 2004. Machine type: MHF 1500/300E1 Serial number: 20401486 Year of manufacture: 2004 Rated connected power: 78 kW Voltage: 3~ 400 V 50 Hz Condition: ready for operation (used) Operating hours: 67,594h Hodpfxsyf E Txs Afhsr Description: Clamping force: 3000kN Injection volume: 1500ccm Tie bar spacing (transverse): 600mm Tie bar spacing (longitudinal): 600mm Heater plate size (W/D): 550 /630mm Daylight opening (open machine): 500mm Connected power: 78kW Power supply: 3x 400V/50Hz Machine dimensions (LxWxH): approx. 4.80 x 1.80 x 2.30 m Machine weight: approx. 7500kg Type of incoming current: standard industrial three-phase electricity supply Equipment: documentation If you have further questions or require more information, please send us a message or call us.

Condition: like new (used), 1500 m² Schäfer R3000 warehouse racking system, 3 stories Used, in top condition, like new, see pictures. Ground floor: steel construction warehouse racking system, above: 2 floors of Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 stories Partial sale possible Hjdpfxjhzw Hij Afhsr Negotiable price: upon request! Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse). Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse racking & steel construction racking immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance projects, we offer a complete, all-round carefree package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including a thorough cleanup. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, TECHNICAL DATA • Manufacturer: META • Frame height: 3,900 mm • Floor width: 1,300 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 10 pcs • Surface: galvanized • Condition: used Large quantities available immediately. Tiered net unit prices excl. VAT: Starter bays: • 1 - 5 bays: €136.90 net each • 6 - 20 bays: €132.94 net each • 21 - 50 bays: €128.98 net each • from 51 bays: €125.02 net each Add-on bays: Hedpfxsuba Rbs Afhjr • 1 - 5 bays: €94.00 net each • 6 - 20 bays: €89.30 net each • 21 - 50 bays: €84.60 net each • from 51 bays: €79.90 net each Available ex stock Nordhorn. YOUR CONTACT PERSONS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at additional cost. Extra charges depend on the place of delivery and shipment size and can be provided upon request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands on favorable terms. If you have questions, please do not hesitate to contact us. Four wins – The building blocks of DLK’s success: Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Technical specifications for the shelving rack: Shelving system: SSI Schäfer Type: R3000 Technical specifications for installation: Number of shelving rows: 1 Shelf length: approx. 1,340 mm Number of bays per shelving row: 1 x 1,280 mm Number of levels: 11 Included in delivery: 2x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Incl. bulkheads and base plates The uprights are pre-assembled 2,278 mm high 300 mm deep 11x shelves, used Material color: sendzimir galvanized Dimensions: 1,282 x 300 x 30 mm Weight | Quantity: approx. 4.79 kg 60x open-fronted storage boxes, used Manufacturer: SSI Schäfer Type: LF 321 GZW Color: red Design: recessed handle on the front Material: polypropylene External dimensions (W x D x H): approx. 210 x 340 x 145 mm Internal dimensions (W x D): approx. 180 x 290 mm Usable height when stacked: approx. 133 mm Stackable: yes Weight | Quantity: 0.560 kg Hsdpfx Afjur H Dkjhor 2x Sidewall, used Name: SWI 3422 Material color: Sendzimir galvanized Dimensions: 2,275 x 175 mm 1x Cross bracing, used Name: KV31013 Material color: Sendzimir galvanized Your contact person in our company: Mr.: Andre Evening Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Your contacts at our company: Hjdpfshrdl Tsx Afhsr Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank The scope of delivery includes: 1x shelf, grade II Material color: Sendzimir galvanized Length: approx. 1,285 mm Depth: approx. 340 mm Height: approx. 30 mm Weight/piece: approx. 4.30 kg Technical data for the shelf: Manufacturer: SSI Schäfer Type: R3000 Type designation: ZB1351308V Maximum load per shelf 150 kg with evenly distributed load General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelving systems. Delivery with our own fleet (without unloading)

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, color: other, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: Hodpezha Hqofx Afhjr -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: refurbished (used), Pressure: 150t Length of Stroke: 140mm Table size: 510x530mm Hedpfx Afsgd H Tpshjr

Condition: good (used), total height: 170 mm, total length: 3,000 mm, total width: 1,500 mm, Dimensions: 3000x1500x170mm Hedpfx Aeth Smbofhor

Condition: used, 1 water chiller, model SINGLE STW150/1-3-10-HK 400 V, 5.7 A, 50 Hz, self-disassembly Color: as shown in the pictures, according to the images and inspection Dimensions L/W/H: 300x92x100 cm Hodpfxezqck Rs Afhjr Condition: used

Condition: new, Year of construction: 2026, We have high-quality load banks from our series production for sale, with the following technical specifications: Condition: NEW Areas of application: - Load testing of emergency generators and uninterruptible power supply (UPS) systems - Grid stabilization through power consumption - Engine test benches Technical features: - Load type: Ohmic resistance - Voltage: 400V, also available up to 800V - Frequency: 50/60 Hz - Power factor: 1 - Power: - 250 kW - 500 kW - 800 kW - 1000 kW - 1500 kW - 2000 kW - Load levels can be set via any key combination - Test report printout - Test automation, automatic start of load levels Hedpfx Afefm T Eushor Operation and control: - Directly via the keypad on the load bank - Via remote box (touch panel) - Via potential-free contacts - Optionally available with Modbus for integration into test automation Further features: - Lockable flaps/doors to prevent dust accumulation during storage - Compact design - Lightweight - Portable - Robust construction with container frame - Forklift slots and crane lifting device Includes electrical wiring diagrams Includes manual Includes software Delivery and commissioning possible for an additional charge.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm Hedpszq R Svsfx Afher • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐

Condition: new, Year of construction: 2026, PREMIUM models feature high rigidity and maximum resolution precision, operating in full interpolation across the X, Y, and Z axes. A high-quality CNC milling router designed for subtractive machining, suitable for numerous industries such as industrial, electronic, welding, woodworking, and advertising. These are efficient and precise machines equipped with user-friendly CNC control systems. Optionally – latest UCanCAM V13 software. Hjdpoycupwofx Afhor Technical parameters Spindle 5.5kW / 18,000 rpm inverter, air-cooled Working area 1500x3000 mm Maximum spindle height 350 mm Control DSP Software resolution 0.001 mm Power supply 400V Weight 1380 kg Machine dimensions 2450 x 3800 x 2200 mm Table height 715 mm Vacuum pump 5.5 kW (optional) Vacuum pressure 440 mbar Guideways linear Drive transmission rack and pinion (Z axis – ball screw) Axis drives hybrid servo drives Software UCanCAM V13 (option) Equipment Air-cooled spindle, PREMIUM version Hybrid servo drives Raised Z-axis gantry – 350 mm Vacuum table – 4 independent vacuum zones + T-slot table for manual fixing Tool height sensor included Tool set, collets, levelling feet, and accessories DSP control – digital signal processing Starter milling cutter set Unloading and machine placement are the customer’s responsibility. Power plug on the customer’s side due to various 16A / 32A sockets. On-site commissioning of CNC routers available upon request, with individual pricing.

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: * Manufacturer: Bohm Wiedenmann GmbH Hodpfx Ajzmhz Tefhor * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. Hedpfxszmap Ao Afhsr The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Technical specifications: Manufacturer: ZEVATRON GmbH Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Automatic manipulator for immersing parts Emergency stop button (E-STOP) Port for connecting a fume extraction system Operating manual included

Condition: like new (used), Year of construction: 2022, table length 1600 mm table width 1000 mm burner heads 1 Control RDC6445G Control System Hsdpexcblkjfx Afhjr laser capacity in Watt 80 travel -x axis 1600 mm travel -y axis 1000 mm travel -z axis 300 mm weight of the machine ca. 300 t dimensions of the machine ca. 2,2 x 1,8 x 1,1 m

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐ Hodozphy Uopfx Afher

Condition: used, Permanent magnet DC servomotor INDRAMAT from MAHO milling machine Type: MDC 10.10H / MMA-0 (MDC10.10H/MMA-0) Serial No. 12423 Component No. 230837 K-M = 0.30 Nm/A Ieff = 11 A Imax. = 75 A Umax. = 170 V n max = Maximum speed = 3000 rpm Tacho: 0.317 Vs/rad Shaft diameter: 22 mm Shaft length: approx. 21 mm (shaft extension from centering edge) Centering diameter: 70 mm, 7 mm height Bolt circle diameter: 92 mm, 4x M8 mounting screws Hjdpfx Ajznn H Eefher Overall length: 270 mm (without shaft) Housing diameter: 133 mm Weight: approx. 20 kg Good condition

Condition: ready for operation (used), Year of construction: 2007, total height: 2,450 mm, travel distance X-axis: 3,090 mm, travel distance Y-axis: 1,540 mm, overall weight: 8,400 kg, table width: 3,000 mm, table length: 1,500 mm, controller manufacturer: FANUC, controller model: FANUC 16I-PB, This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information. Additional equipment • Integrated Auto-Index system • Automatic tool change system with 15 stations • Waste extraction system at the die • Pedal for opening/closing sheet clamps • Pedal for single punching operation • Automatic collision prevention for tilting parts and cutouts • Interactive CAD with export function • Import of CAD drawings in common formats • Interactive nesting (freehand, bump nesting) • Automatic positioning of special tools Machine Benefits Qualitative Machine Benefits • Maximum punching diameter with technology tools: 100 mm • Maximum punching diameter with trumpf tools: 80 mm • Maximum punching and nibbling thickness: 6 mm • Automatic tool sharpening recovery: 10 mm • Tool change time: 4 seconds Hedpfx Aezn Hk Nsfhor • Automatic sheet metal processing, including residual grid destruction Technical Machine Benefits • Workpiece repositioning: automatic • C-frame structure: c-frame (schwanenhals) • Operating manuals included • Technical support available • Processable sheets with automatic repositioning: 1500 x 6000 mm • Steel and ball plates for sheet metal support • Front horizontal plane for sheet metal unloading • Number of stored stations: 15 • Number of rotating stations: 15 Extra Information Machine still under power Dimensions Machine Depth 6190 mm

Condition: used, Year of construction: 2009, 3520 kW Operating weight max. 120.000 ca. 55.000 kg Unladen weight of the kiln car ca. 40.000 Usable dimensions 4000x1500x10500 Clear dimensions 5.000 x 2.575 x 11.275 External dimensions 7.100 x 7.245 (mit Türpor 550 – 1.100 °C Max. permissible oven chamber temperature 1.150 Safety cut-off temperature 1.180 Complete System – Industrial Heat Treatment Line with 6 Identical Bogie Hearth Furnaces and Quenching System For sale is a complete industrial heat treatment system consisting of 6 identical bogie hearth furnaces type HW150-3520-1100, including an integrated quenching system and complete central plant equipment. The offered system represents a fully coordinated industrial production solution for demanding thermal processing applications. All six bogie hearth furnaces are of identical design, ensuring consistent process conditions, high operational availability, and excellent interchangeability of components. The complete system includes not only the six high-performance bogie hearth furnaces but also the required central plant components and auxiliary systems, including burner systems, combustion air supply, exhaust gas extraction, temperature control and monitoring systems, as well as the complete furnace and bogie equipment. With a rated heating capacity of 3,520 kW per furnace, an operating temperature range of up to 1,100 °C, and a maximum load capacity of up to 120,000 kg per furnace, this system provides a powerful solution for large-scale industrial heat treatment processes. The combination of six identical furnace units together with the integrated quenching section offers: High production capacity through parallel operation of multiple furnace units Reliable and repeatable heat treatment processes Flexible handling of different charge sizes Centralized and coordinated plant utilities Robust industrial design for continuous production environments The system is offered as a complete turnkey heat treatment solution and provides an immediately deployable production platform for industrial applications requiring high capacity, process reliability, and consistent thermal treatment results. Technical Data 7.1 Furnace Housing Dimensions External dimensions1: 7,100 x 7,245 (incl. door portal) x 12,745 mm Clear dimensions: 5,000 x 2,575 x 11,275 mm Usable dimensions: 4,000 x 1,500 x 10,500 mm Workpiece supports: 6 units, height 475 x 340 mm 7.2 Weights Empty weight of housing: approx. 55,000 kg Empty weight of hearth car: approx. 40,000 kg Operating weight: max. 120,000 kg Weight of supports: 6 units at 5,083 kg each = 30,500 kg 7.3 Performance Data Nominal heating capacity: 3,520 kW Temperature control range: 550 – 1,100°C Max. permissible furnace chamber temperature: 1,150°C Safety cut-off temperature: 1,180°C Heating rate: max. 60 K/h at 120,000 kg operating weight Max. permissible heating rate: 60 K/h Number of temperature control zones: 6 All dimensions: width x height x depth or Ø x height. Utility Supply Parameters 7.4.1 Natural Gas Calorific value Hu(n): 10.6 kWh/m³(n) Gas inlet pressure: 2.0 bar Max. volume flow: 334 m³(n)/h / 118 m³(b)/h Temperature: +5 to +25°C. 7.4.2 Combustion air Composition: Ambient air Combustion air pressure: max. 100 mbar Max. volumetric flow rate: 11,500 m³(n)/h Hsdpjzpbmbjfx Afhjr Temperature: +5 to +40°C 7.4.3 Power supply Voltage: 400 V Mains frequency: 50 Hz Connected loa...

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Cold Feed Rubber Vacuum Extruder 150mm 20d manufactured by years: 2020 condition in new Equipment type E150-01-00 Screw diameter 150 mm Screw Speed 1-50 r/min Max output Around 1000kg/h Temperature control system The heating section number/power 6kw×7 Application Rubber extrusion mixing and plasticization, and extrude certain size of products in accordance with the machine head External dimensions 4200×1600×1500 (L×W×H)mm Extrusion system The feeding way Side rolls transmission power through the screw, active feeding. Feeding structure Feed roller gear and the screw gear, and with automatic lubricating device. Screw material 38GrMoAcA Hedpfx Afsy Ez Ershjr Screw hardness HRC65-68 hardness of steel sleeve HRC65-70 Nitriding depth 0.4—0.7mm Screw structure With exhaust slot, with good performance of Pressure control With the pressure sensor, pressure protectionvalue 0-35MPA adjustable, also with a temperature sensor L/D 20:1 Cooling section 1 section (side rolls) Vacuum pump power 2.2 KW Temperature control Automatic control heating, cooling by electromagnetic valve Circulating pump brand Weile Cooling water pressure 0.15-2 kg/cm2 Temperature control accuracy ±1℃ Screw and the gear box Involute connection Drive of the motor and the reducer Belt drive Hardened reducer model Reducer (involute) ZLYJ420-28-I speed regulation Frequency conversion 2. Rubber sheet head(Pneumatic) 1 Equipment type E200-PDJT-03-00 2 Equipment use With the use of extruder, extrusion foaming plate for expansion Dimensions 1170×510×330 (L×W×H) mm Head Material 40Cr Heating mode By mold temperature unit, the water cycle control Heat treatment Quenching and tempering, carburizing Surface treatment electroplate runner structure Straight type