Used Jack Stand Drying Waggon for sale (11,928)

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Rsdpfx Ajzdtflebhjw Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here, we offer a Heraeus heating and circulating air drying cabinet. Heraeus heating and circulating air drying cabinet up to 300 °C Manufacturer / Type: Heraeus UT 6060 Features: Rjdpezdr Dyefx Abhjw Temperature range: 300°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage 230V, Rated frequency 50/60Hz, Rated current 6.8A, Rated power 1.50kW Includes 2 inserts Type: UT 66060 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: new, Here we offer a ULVAC dry vacuum pump. ULVAC dry vacuum pump Solution for demanding process applications Dry vacuum pump Redpfezdqtgex Abhew ULVAC's unique approach to utilizing the latent heat within the pump body enables the LR/HR/UR series to deliver performance even in the most demanding processes. ULVAC has focused its design efforts on maintaining an extremely uniform, high temperature across all pump stages, optimizing this pump family for CVD and etching applications. Compatible with the ULVAC ECO-SHOCK system for additional energy savings. Features: The LR series pump is designed for load lock chambers and PVD processes. ULVAC's unique aluminum design enables very uniform temperature distribution throughout the pump body: The ULVAC LR series pump is designed for applications that require a heated pump, heated gas lines, and/or heated exhaust lines. Excellent helium pumping capacity Sealed motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high degree of surface hardness and excellent corrosion resistance. This prevents the wear of internal pump parts when exposed to corrosive gases. (LR series) Designed for process gases that generate powdery byproducts, such as Si crystal growth furnaces. Pre-pump for turbo-molecular and mechanical booster pumps Type: LR600 Condition: new Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer a Pfeiffer vacuum pump station. Pfeiffer vacuum pump WKP 500 A Model PP W31 928 / X 2161 n: 2800 1/min Oil: P 3 1.5 l S(N2): Theoretical 500 m³/h Weight: 125 kg Motor type: EELQ-8T Oerlikon Leybold SCROLLVAC SC 60 D Ultimate pressure: 0.01 mbar Redpjzdqr Njfx Abhsw Motor: 3-phase, 200/400 V, 50/60 Hz Pumping speed (50 Hz): 52 m³/h Pumping speed (60 Hz): 62 m³/h Oil-free High effective pumping capacity Low ultimate pressure Low-vibration operation Type: WOD 410 B Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Rodpfx Aboxzukkehew Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per insert: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Depth: 870 mm Internal dimensions: Width: 1,000 mm Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included.

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing Redpfx Abjwhdnhjhjw bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: good (used), Here we offer a PINK vacuum drying oven. PINK vacuum drying oven Space requirements for operation and maintenance: Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions of the vacuum drying oven: External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber 79 liters Operating temperature min. 20 °C, max. 150 °C Electrical connection: Supply voltage 3 x 400 V; 50 Hz, N / PE, 8.5 kVA Heating power 6 kW Cooling power 6 kW at 15 °C medium temperature and 15 °C cooling water temperature Heating: Floor, ceiling, side walls and door, double-walled; heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters, depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: used Rsdpfx Aozdi Ivjbhow Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 283 h, load capacity: 2,000 kg, lifting height: 220 mm, free lift: 220 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 820 kg, drive type: Elektro, construction width: 740 mm, Reach truck Load center: 600 Fork width: 175 mm Fork thickness: 60 mm Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 24V Battery capacity: 345Ah Battery manufacturer: Marathon Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Rsdpfx Abszhczqshjw Description: The unit has been refurbished both visually and technically. Maintenance including hydraulic oil replacement has been performed. UVV inspection has been renewed. CE certificate.

Condition: excellent (used), Used Cold Jet machine, model Pcs60. I provide a 12-month warranty. The set includes a hose for dry ice blasting, applicator, one nozzle of your choice, hose for compressed air supply, as well as holders and straps for transport. The machine is fully functional. Rodpjy Hf Iasfx Abhow

Condition: used, PD2052-AC2 / PD2052 AC2 / PD2052AC2, PR1800 + PD500, Hanbell Precise Machinery Co. LTD – Dry screw vacuum pump with display Rodpfxoitywre Abhsw Model: PD2052-AC2 Type: PR1800 + PD500 Condition: Used

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Rjdexg Igiepfx Abhsw

Condition: used, IKA EURO ST-D with 2 Paddles and H-Stand Reliable IKA EURO ST-D overhead stirrer, offered complete with 2 stirring paddles and an H-stand. Ideal for laboratory mixing applications that require stable and consistent stirring performance. The unit is supplied with all the essential accessories needed for immediate use. Included: IKA EURO ST-D overhead stirrer 2 stirring paddles Rjdpezh Rhrefx Abhew H-stand Suitable for: General laboratory mixing Research and development Chemical and pharmaceutical lab work Condition: Used Availability: Ready for immediate delivery

Condition: new, Year of construction: 2025, machine/vehicle number: CAT0DE65CN7300532, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 992 kg Functional Generator capacity: 65 kVA Dimensions of cargo space: 230 x 96 x 140 cm CE mark: yes Other information Fuel consumption: 11.3 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 103 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy Redpfjzhzyxex Abhsw - Tank

Condition: excellent (used), Binder FD 53 Drying Oven / Heating Cabinet Manufacturer: Binder Type: FD 53 Year of manufacture: 2014 Made in Germany Drying oven / heating cabinet with forced air circulation for laboratory, research, quality assurance, material testing, and industrial applications. Technical data Rjdpfozcwxzsx Abhow Internal volume: 53 liters Temperature range: approx. +5 °C above ambient temperature to 300 °C Internal dimensions (W x H x D): approx. 400 x 400 x 340 mm External dimensions (W x H x D): approx. 635 x 620 x 690 mm Load per shelf: 15 kg Maximum total load: 40 kg Empty weight: approx. 44 kg Power connection: 230 V Frequency: 50 / 60 Hz Rated current: 5.3 A Rated power: 1.2 kW Protection class: IP20 Equipment Forced air circulation system Digital temperature display Electronic temperature control Safety temperature limiter according to DIN 12880 Stainless steel interior Multiple shelf levels Robust laboratory design Inspection / Calibration DGUV V3 inspection performed on: 28.07.2023 Calibration performed on: 28.07.2023 Inspection and calibration stickers are attached to the device. Condition Used equipment. Device can be switched on, temperature display is active. Signs of wear and tear due to age and use. Optical condition as shown in the pictures. Scope of supply: see pictures. The table shown in the pictures is not included in the sale. Shipping possible. Errors and omissions excepted.

Condition: used, functionality: fully functional, Used shaft frame lifter from Zagro, fully functional. Rjdpfx Abozg T U Eshjw

Condition: not inspected (used), Year of construction: 2013, working width: 330 mm, passage height: 120 mm, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying tunnel is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame lumber, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width: approx. 330 mm Passage height: approx. 120 mm Infrared heating elements on the top and bottom Includes outlet conveyor belt, manufacturer: Makor Length: 4000 mm, conveyor belt width: 250 mm Connected load: approx. 55 kW Dimensions: Drying tunnel: approx. 5000 x 1400 x 1750 mm (L x W x H) Operator terminal: approx. 1200 x 500 x 1100 mm (L x W x H) Conveyor belt: approx. 4000 x 600 mm (L x W) Rsdpfx Abezhap Ejhow Total weight: approx. 2200 kg

Condition: used, Technical details: voltage: 220 V / Hz revolution per minute: nicht bekannt U/min Redpou Ngx Dsfx Abhsw weight: 59 kg dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding block mounted on stand, foot mounting possible *

Condition: used, Year of construction: 1986, Technical details: grinding wheel diameter: 200 mm voltage: 380 / 50 V / Hz Rodpfxsu Ngxqo Abhew revolution per minute: 3000 U/min height over floor: 1000 mm current type: 380 V total power requirement: 0,9 (900 Watt) kW weight: 52 kg dimensions L x W x H: ca. 0,4 x 0,56 x 1,2 m Double sanding block mounted on stand currently clamped grinding wheels 2x, Ø 80x x 30mm right and Ø 160 x 30mm left Handrail, movable Grinding guard Holder for cooling water tank *

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220-380 - 50 V / Hz revolution per minute: 2750 U/min total power requirement: 900 Watt weight: 87 kg dimensions L x W x H: 0,32 x 0,56 x 1,0 m Double sanding block with handrail, adjustable no grinding protection guard Use max. sanding discs Ø 200mm Rodju Ngwmepfx Abhew max. sanding disc thickness 32mm Grinding wheels currently clamped: left = Ø 180 x 24mm and right = Ø 150 x 31mm *

Condition: used, Technical details: grinding wheel diameter: 200 mm revolution per minute: 2750 U/min total power requirement: 700 Watt current: 220 / 380 A weight: 70 kg dimensions L x W x H: 0,4 x 0,46 x 1,22 m Double sanding block, table-top unit mounted on stand with handrail on both sides, adjustable/swiveling Sanding guard on both sides Use max. sanding discs Ø 200mm max. sanding disc thickness 30mm sanding disc currently clamped on sanding block: left=Ø 160 x 30mm and right=Ø 160 x 22.5mm Connections for dust extraction on both sides Ø 35mm Rodpfou Ngvijx Abhjw *

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 Rjdpfx Abju Ngu Sjhsw *

Condition: used, Year of construction: 1977, Technical details: grinding wheel diameter: 200 mm revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V Rodpfju Nguxsx Abhow total power requirement: 900 Watt weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Double grinding block Main switch - On/off switch Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Condition: ready for operation (used), Siemens 6ES5900-0AA12 Central Processing Unit E, version A, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rodji Edqyepfx Abhew

Condition: ready for operation (used), Siemens 6FM1706-3AA20 Positioning/Counting Module WF706, E-version A / 3, SN: 11272, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rsdei Ed H Djpfx Abhow

Condition: new, Siemens SMP Centronics G34901-C1032/33, E Status see photo, used, good condition, 100% functional Rjdpfxsxahvdo Abhow