Used Klopp Fwsu 1300 for sale (2,437)

Condition: excellent (used), Year of construction: 2010, I sell the 1-head 1-lamp UV-drying tunnel Burkle TRUV 1300 Year 2010 Working width 1300mm. Gusdpfx Asvxa T Ajkaog Total length 2,00m Total power 18,7kW 1 Lamp GA 120 W Very good condition, available immediately.

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm Gedpfsv Hw Hcjx Akaeug - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: ready for operation (used), machine/vehicle number: 5981, Working height: 870 mm Gjdpfxjyah Uzj Akasug Working width: 1300 mm Conveyor belt width: 1270 mm Conveyor speed: 6 - 30 m/min, continuously adjustable Clearance height: 3 mm - 80 mm 1 rubber-coated application roller, 238 mm diameter, rubber coating 5 By1 1 chrome-plated metering roller, 174 mm diameter Electrical equipment: Operating voltage 400 V, 50 Hz 3 phases Total connected load: 1.9 kW Motors and switching devices in explosion-proof design Additional equipment: Individual drive for the metering roller, continuously adjustable, with oscillating metering roller squeegee Operating side: left Machine length: 1000 mm Weight: 1000 kg

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Working height: 780–920 mm Feed rate: 4.5–22 m/min Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Brush roller: Ø 150 mm Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Guedozinvijpfx Akasg Machine weight: approx. 3,850 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 500 mm, spindle bore: 80 mm, turning diameter: 760 mm, center height in crank: 1,030 mm, center height: 380 mm, center width: 2,200 mm, turning length: 2,200 mm, total length: 3,900 mm, total width: 1,200 mm, total height: 1,850 mm, spindle speed (max.): 1,300 rpm, spindle speed (min.): 23 rpm, overall weight: 3,650 kg, Denver HG-760x2200 Rarely used. Spindle height: 380 mm Distance between centers: 2200 mm Spindle bore: Ø 80 mm Spindle speeds: 23–1300 rpm Automatic longitudinal and transverse feed Threading / Metric / Inch, etc. Three-jaw chuck Digital display for longitudinal and transverse axis Steady rest Ø 490 mm Steady rest Ø 400 mm Four-jaw chuck / faceplate Work light 3 x 400 V Delivery possible Gusdpfx Akjzy U E Sjaeg

Condition: used, Year of construction: 1988, x-travel 1800 mm Guodpfxezf Nuxj Akaog y-travel 700 mm z-travel 1200 mm ja 2 control Heidenhain 155 table: 700-2000 mm documentation ja dismantled ja weight of the machine ca. 12,5 t

Condition: used, Year of construction: 2015, total length: 2,100 mm, total width: 900 mm, total height: 1,050 mm, Colour: White Weight: 250 kg - Details: - └ Description: Front-wheel drive not available - Year: 2015 - Documentation available: No Gujdpfezrkxrjx Akasg - CE marking present: Yes - CE certificate present: No - Serial number: KK/126675 - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1300 - Roller table length [mm]: 840 - Table width [mm]: 560 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 45 - └ Max. adjustable [°]: 90 - └ Cutting height at 45° [mm]: 70 - Voltage [V]: 400 - Current consumption [A]: 10 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 2100mm x 900mm x 1050mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor Gedpozizabjfx Akaoug • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,320 mm, grinding height: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm • Maximum working height – 160 mm • Two sanding units: - First unit: calibrating roller made of hard rubber, diameter 300 mm (brand new, recently resurfaced) Guedpew U Dxfefx Akaeg - Second unit: platen with sectional shoe and jump-in/out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine operated via touchscreen panel with memory for various programs and settings as required • Capability to operate in manual mode (user-defined parameters) or automatic mode (pre-saved programs with settings and parameters) • Stepless adjustment of the second unit’s rotational speed • Stepless feed speed adjustment • Electronic thickness gauge for the workpiece • Vacuum pump included • Belt cleaning/blow-off mechanism • Oscillation controlled by photoelectric sensors • Conveyor in very good condition • Extension roller tables included • Material thickness measuring gauge • Sensor to prevent feeding elements that are too thick • Original paintwork • Abrasive belt size – 2620 x 1320 mm • Extraction ports – 3 x 175 mm + 120 mm from brush • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Provided photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Guedpfxjy D Hr Uj Akajg Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 128 9 7000 3043, feed length X-axis: 1,350 mm, total width: 1,975 mm, total height: 2,350 mm, total length: 2,260 mm, overall weight: 4,500 kg, working height: 880 mm, power: 93 kW (126.44 HP), workpiece height (max.): 150 mm, air demand: 151 m³/h, Good condition. Gjdpfszf U T Hjx Akajug Planned dismantle DEC-2026

Condition: used, Year of construction: 1978, machine/vehicle number: 78004, functionality: fully functional, type of input current: three-phase, We are offering this used Csepel 12UH/1600 radial drilling machine, year of manufacture 1978. Gusdpoyh Uaqofx Akaeg Model: 12UH/1600 Serial number: 78004 Power type: 3~ Wiring diagram no.: 358000 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Sanding width: 1,650 mm Gusdpfx Akezx R Dneajg Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: good (used), Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Godevw Uf Dspfx Akasug Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height mm 800 N° 3 dust hoods mm 150 Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17 Overall dimensions mm 2600 x 2280 x 1360 h Weight kg 2250

Condition: used, Year of construction: 2022, overall weight: 6,350 kg, Sanding machine SCM DMC SY TC 1350 Gjdpfjzuzkksx Akaoug Year of manufacture: 2022 Working width: 1350 mm 3 sanding units: - Longitudinal - Transverse - Longitudinal - Brush Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW -Current consumption: 350 Amperes -Maximum temperature: 1300 °C -Oven weight (approx.): 6000 kg -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers -Controlled cooling system (including frequency converter, controlled via the control system) Gsdpfxsy Avmle Akaoug -Electrically driven furnace car -Maximum load: 3.5 tons -Swinging door -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 282015 SDU8300, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 8 m/min, spindle speed (max.): 45,000 rpm, table width: 1,500 mm, table length: 1,000 mm, total height: 2,200 mm, total width: 2,800 mm, total length: 1,950 mm, type of input current: AC, input voltage: 400 V, spindle motor power: 6,000 W, CNC machine for powerful machining. The steel/granite sandwich construction for the moving axes, such as the gantry and cross slide, can optionally be driven by AC servomotors via ball screws or by linear motors. In conjunction with high-precision linear guides, it forms the basis of the massive steel/granite machine construction. The advantages of natural stone granite combined with high-strength, lightweight metal offer the highest stiffness while simultaneously reducing weight. This is the only way to achieve the desired dynamics and high feed rates. High-frequency spindles with up to 6.0 kW and 45,000 rpm with HSK25 / HSK32 tool holders are used as milling spindles. The 18-position tool changer (expandable to 36 tools), installed outside the working area, automatically moves from the protective housing to the milling spindle. With the 4th/5th axis designed as a swivel head and the integrated, high-precision gear drive modules, almost all positions of a complex workpiece can be reached with the milling tool. The machine is completed with new, state-of-the-art CNC control functions and an easy-to-use user interface. This allows for 5-axis simultaneous machining via RTCP (Rotation Tool Center Point) function. The control and operating components from Heidenhain include a touchscreen monitor and a comfortable handwheel. Different workpiece clamping systems can be mounted on the universal granite table via steel threaded bushings in a 150x150 mm grid. -Innovative steel/granite sandwich construction -State-of-the-art control technology based on Heidenhain -Automatic tool changer with tool measurement/inspection -Optionally with high-dynamic linear motors or ball screw drives -4th/5th axis as a swivel head or rotary tilting unit on the machine bed -RTCP, TLC, axis kinematics and clamping position compensation -Metal/granite sandwich construction -Rotary/swivel swivel head (4th and 5th axis) -High-dynamic linear motors in the X and Y axes -18-position tool changer, expandable to 36 tools -Heidenhain® TNC640 high-end control -Tool measurement by tool setter or laser -3D edge probe -Modern control panel -Water cooling -Heidenhain® LMT TT160 / optional laser measurement -3D measuring probe -Handwheel -Minimum quantity lubrication -Tool holders Ideal for machining: Gsdpfxezzzylo Akaoug Brass Aluminum Ceramics Plastic Copper

Condition: used, Year of construction: 1998, Technical Data: - Manufacturer: Ernst - Type: BM 2 - 1300 - Year of Manufacture: 1998 - Max. brush width: 1,300 mm Gedpfszubpaex Akaeug - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motors: 2 × 5.5 kW - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30-350 rpm - Feed rate 3-15 m/min. - Weight: 1900 kg 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz - Fuse to be provided by the customer: 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm2). 2.6 PNEUMATIC CONNECTION - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm - Air requirement 1,108 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m3/h

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Self-loading press for laminated wood Steton P111 3000×1300 Working length: 3000 mm Working width: 1300 mm Automatic material loading Shelves heated by oil Diameter of vertical pistons: 70 mm Diameter of horizontal pistons: 50 mm Year of manufacture: 2006 Total power: 24.5 kW CE certificate Gsdpfxsyuah Ao Akaoug

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 2): 10,000 kg, first registration: 09/2009, total length: 11,500 mm, total width: 2,600 mm, tire size: 275/70R22.5, wheelbase: 7,500 mm, color: white, Year of construction: 2009, Equipment: tail-lift, = Additional Options and Accessories = - Refrigeration/Freezer Unit - Air Suspension = Notes = Pacton refrigerated semi-trailer with single axle 1999 Maxima Carrier refrigeration unit 1300 7039 operating hours* Unit manufactured in 2004 with Mariba loading platform Spare wheel holder + spare wheel Toolbox = Further Information = Axle Configuration Front Axle: Tire size: 275/70R22.5; Double tires; Steerable; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40% Maximum Rear Axle Load: 10,000 kg Weights Unladen weight: 8,530 kg Payload: 13,470 kg GVW: 21,999 kg Functional Body brand: carrier Refrigeration engine: Diesel and electric (7040 operating hours, diesel) Condition Technical condition: good Optical condition: good Warranty Warranty: Pacton refrigerated semi-trailer with single axle Godpfxszmg Ryo Akajug 1999 Maxima Carrier refrigeration unit 1300 7039 operating hours* Unit manufactured in 2004 with Mariba loading platform Spare wheel holder + spare wheel Toolbox Identification License plate: OK-58-XV Further Information Please contact VAEX The Truck Traders for further information.

Condition: used, Year of construction: 2021, machine/vehicle number: 13900, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 13900 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Gusdez Aa Eiopfx Akaog Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9088000069A, travel distance X-axis: 1,100 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,700 kg, overall weight: 6,950 kg, For sale is a DMG MORI M2 Pro machining center, manufactured in 2023, in good condition. The machine was in operation for approximately 2.5 years, is fully functional, and can be inspected by appointment. The sale is due to a restructuring of our machine park. Technical data: Manufacturer: DMG MORI Model: M2 Pro Year of manufacture: 2023 Control system: Siemens SINUMERIK ONE Spindle speed: 12,000 rpm Travel distances (X/Y/Z): 1,100 / 550 / 510 mm Table size: 1,400 × 600 mm Maximum table load: 1,700 kg Machine weight: approx. 6,950 kg Condition: Good condition Fully functional Inspection possible by arrangement We will gladly provide the current operating hours upon request. Guodszh U Ngjpfx Akaog If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1990, Paint/coating application system Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding. Gusdszuzqdopfx Akaog

Condition: excellent (used), Year of construction: 1998, HÖFER LAN 1300 Adhesive Coating Machine For the efficient application of water-soluble dispersions (white glue, etc.) on one or both sides. Coating width: maximum 1300 mm Guedeza A Aajpfx Akasg Drive: 0.37 kW geared motor Rubber-coated coating rollers: Ø 170 mm Grooving for coating quantity: approx. 120 g/m² (for veneers) Constant coating speed: approx. 16 m/min Working height: approx. 900 mm Maximum workpiece thickness: 80 mm Design complies with CE standards Manual feed Operating side: right Including swivel casters Machine dimensions L x W x H = 1750 x 660 x 1300 mm

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Gsdpfx Akoyddzfeaoug