Used Liebherr Wsc 501 for sale (1,062)

Condition: used, Year of construction: 2001, travel -x axis 1800 mm travel -y axis 520 mm travel -z axis 520 mm tool taper SK 40 table load 3 t tool piece magazine with 30 Plätze spindle drive 22 kW max. torque on the spindle 220 Nm *Machine in very good condition* + Loading door windows have been replaced + Linear guide carriages on X and Y axes have been replaced - Heidenhain iTNC 426-M control system - Partition wall for pendulum operation - Chip conveyor - Filter system - Spindle up to 8000 rpm - Rapid traverse x/y/z: 30/30/30 m/min - Year of manufacture 2001 Control on: 93212:52:14 Machine on: 82284:39:36 Psdpfx Alsvh R Txjworb Program run: 42385:36:11

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis Prsdpfozlbp Usx Alwsb - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,560 h, load capacity: 2,500 kg, lifting height: 4,460 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,070 mm, fork length: 1,500 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Prodpfx Aez Al N Helwjb Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V Battery capacity: 500Ah Battery year of manufacture: 2015 Description: Side shifter, fork positioner, Battery defective!!! 3rd valve, 4th valve, rear work light, front work light, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cabin, LED, Radio

Year of construction: 2015, condition: good (used), Parts shown by hand not come. Podpfxsz Atbwj Alwjrb

Condition: excellent (used), mileage: 3,55,982 km, power: 184 kW (250.17 HP), first registration: 01/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro6, number of seats: 3, total length: 1,02,720 mm, total width: 2,550 mm, loading space length: 7,580 mm, loading space width: 2,500 mm, Year of construction: 2018, Equipment: ABS, AdBlue, central locking, crane, cruise control, electric window regulation, power mirror, = Additional options and accessories = - 3 chairs - Aluminum fuel tank - Lane Departure Warning - PTO - Spare tire - Toolbox = Remarks = Crane Number of hydraulic extensions: 2 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 11,50 m Capacity kilo: 6100 kg = More information = General information Number of doors: 2 Cab: single Registration number: 1XMC148 Technical information Number of cylinders: 6 Engine capacity: 6.728 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 10.043 kg Carrying capacity: 8.957 kg GVW: 19.000 kg Functional Crane: PALFINGER PK14.501 SLD, year of manufacture 2021, behind the cab Maintenance, history and condition APK (MOT): tested until 02/2027 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Prjdpfxezhxnme Alweb When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 2,76,334 km, power: 110 kW (149.56 HP), first registration: 04/2002, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 03/2027, color: white, gearing type: mechanical, emission class: euro3, Equipment: all wheel drive, crane, Mercedes-Benz 815D flatbed truck + PK7501 crane, 4x4, white Prsdpfx Aez Dctislweb Wheelbase: 3.70 m Suspension: leaf spring/leaf spring Palfinger crane Type: PK7501 2x hydraulic extensions 2x hydraulic outriggers Flatbed Length: 2.80 m Width: 2.28 m Height: 0.60 m Height from the ground: 1.09 m We would be happy to assist you with financing/leasing options through our partners. All information is provided without guarantee. Errors and prior sale excepted.

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm Prodezuw H Iepfx Alwob - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: as good as new (ex-display), Year of construction: 2017, Conveyor belt / belt conveyor Psdpfx Alef Rlgkswsrb Belt width: approx. 300 mm Center distance: approx.3,130 mm Drive: 0.75 kW As good as new - only in use for a very short time

Condition: used, mileage: 7,15,606 km, power: 184 kW (250.17 HP), first registration: 04/2014, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, brakes: engine braking, color: silver, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 8,890 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, trailer coupling, = Additional Options and Accessories = Other - Remote-controlled central locking - Air suspension - Radio - Disc brakes - Tool kit Other - Sun visor = Notes = Tyhof construction. Prodjzl Sf Tspfx Alwjb 3,500 kg trailer coupling. Upper bed length: 430 cm Lower bed length: 700 cm. = Further Information = Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Leaf spring suspension Rear axle: Dual tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Number of cylinders: 6 GVWR: 18,600 kg APK (Technical Inspection): Valid until 04/2027 Price: On request Model number: FE 250 18T / TYHOF CAR TRANSPORT = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: Podpezlbpbjfx Alworb The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: new, functionality: fully functional, machine/vehicle number: NEW-19, maximum load weight: 1,105 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 133 1350 2 NEW VEHICLE Internal dimensions: 205 cm x 133 cm Sidewall height incl. railing: 43 cm Loading platform height: 52 cm Gross weight: 1350 kg Payload: 1100 kg Braked single-axle low-loader Overrun brake and handbrake by AL-KO 1350 kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15 mm thick, robust phenolic plywood sidewalls Steel railing Rear drop-down/removable tailboard with tension locks 15 mm thick, slip-resistant, robust phenolic plywood floor Jockey wheel Prodpfx Aljrk Ik Hjwjb 6 lashing eyes with 400 kg traction force 14" reinforced C-type tyres M+S tires Mesh/rope hooks on the frame 13-pin plug Front marker lights Rear lights with reversing light, fog light and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026: - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front board - Loading ramps - SARIS light alloy wheels - Complete LED lighting - Anti-theft lock - Fine or coarse-mesh net - H-frame - Mesh sides in various heights, also available closed - Flat tarpaulin with or without bows - Raised tarpaulin 120 cm - Rear supports Additional accessories available on request! Plus freight to Gera and vehicle registration documents: €100 net. Images are for illustration purposes and may show optional accessories subject to surcharge. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate pickup. Our workshop operates weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Axle repair specialist, including for caravans. Large selection of rental trailers available. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Refurbished in 2026. Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts black steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected while in operation in Vilnius. Pedpfx Alowinpxowsrb

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. type: BAS 050-11 serial number: 224085 year of manufacture: 1998 year nominal power at 50% ED: 45 kVA rated apparent power: 45 kVA no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call. Psdpfszudivox Alwsrb

Year of construction: 2015, condition: used, Power consumption 12,5 KVA Power factor 0,95 rated capacity 10 kW Output current 560 A eff Podpjzq Hknofx Alwerb output voltage 1500 V eff In our estimation, the machine is in like-new condition and can be inspected under power by appointment. - Includes various accessories Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: new, Year of construction: 2026, machine/vehicle number: F25L159291, fuel type: diesel, motor manufacturer: X2.5-G2, General information Field of application: Construction Weights Empty weight: 757 kg Functional Generator capacity: 22 kVA Dimensions of cargo space: 196 x 82 x 129 cm CE mark: yes Other information Fuel consumption: 4.4 Liter per Hour at 75% Load Generator: Stamford S0L2-G1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 55 l Production country: PT Additional information Prodpfx Alozhfgcjwsb Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use

Condition: ready for operation (used), Simens 6RA8025-6GS22-0AA0 SINAMICS DCM DC-Converter SN: Q6H22450101, used, good condition, 100% functional, scope of delivery as per photos Pedpfx Aloz Acyieworb

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Prjdpfocvkaljx Alwjb Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: good (used), mileage: 10,57,625 km, power: 102 kW (138.68 HP), first registration: 10/2011, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,360 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 9,500 mm, total width: 2,550 mm, total height: 2,920 mm, loading space length: 6,000 mm, loading space width: 2,480 mm, loading space height: 1,630 mm, Year of construction: 2011, Equipment: ABS, cruise control, electric window regulation, power mirror, = Additional options and equipment = - Heated mirrors - Digital tachograph - Tachograph (control unit) - Fixed fifth wheel - Halogen headlights - Short cab - Manual adjustment - Fabric upholstery Psdpfx Aloy Echzjwjrb = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 6,650 kg, Gross weight: 16,000 kg, Total fuel capacity: 320 liters, Fifth wheel: Fixed, Number of differentials: 1, Cabin type: Short cab, Cruise control, Tachograph (control unit), Digital tachograph, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen, Engine power: 102 kW (137 hp), Fuel type: Diesel, Emissions standard: Euro 5, Transmission type: AS-Tronic, Gearbox make: ZF, Gears: 6, Power steering, ABS, Starter battery, Sliding roof, Seating configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Spare wheel, Spare wheel tread: 15% = Further information = Transmission Transmission: ZF, 6 gears, automatic Axle configuration Tyre dimension: 285/70R19.5 Brakes: Disc brakes Axle 1: Steering; Left tyre tread: 6 mm; Right tyre tread: 2 mm; Suspension: leaf Axle 2: Twin tyres; Left inner tread: 7 mm; Left outer tread: 7 mm; Right inner tread: 8 mm; Right outer tread: 7 mm; Suspension: air Weights Unladen weight: 6,650 kg Payload: 9,350 kg Gross vehicle weight: 16,000 kg Functional Loading height: 115 cm Sliding roof: Yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration: KLEYN1 = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognized quality • Competitive prices • Reliable business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates quickly arranged • Expert technical services • The assurance of 'recognizable quality' • And more… Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry through our website. Ask directly about our European warranty packages.

Condition: used, Year of construction: 2012, operating hours: 18,252 h, lifting height: 5,220 mm, free lift: 1,780 mm, fuel type: electric, mast type: triplex, fork length: 1,000 mm, fork width: 920 mm, total height: 2,250 mm, total length: 1,770 mm, total width: 990 mm, color: orange, Empty weight: 2.767 kg Lifting capacity: 1.300 kg - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 515063C00343 - Operating hours: 18252 - Lifting capacity: 1300kg - Lifting height: 5220mm - Overhead clearance: 2250mm - Free lift: 1780mm - Fork length: 1000mm - Maximum fork width: 920mm - Minimum fork width: 160mm - Number of wheels: 3 Wheels - Attachment: Side-shift - Options: Free-lift, Non-marking tires, Work lights - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: Classic/24V 7EPZS 805 - └ Battery year of construction: 2012 - └ Capacity: 805Ah Pedpfjzv Sa Sjx Alwjrb - └ Battery voltage: 24V - └ Tray length [mm]: 830 - └ Tray width [mm]: 435 - └ Tray height [mm]: 630 - Transport dimensions: 1770mm x 990mm x 2250mm (l x w x h) - Transport weight [kg]: 2767kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, overall weight: 5,500 kg, total width: 2,840 mm, total height: 2,700 mm, product length (max.): 5,440 mm, table length: 1,000 mm, table width: 500 mm, number of axes: 3, This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details. - Control: Siemens Smart Line Touch- Magnetic table: 1000 mm x 500 mm- Total Power: 14 kW- Voltage: 400 V- Frequency: 50/60 Hz- Grinding wheel size: D350 x 40 mm- Coolant System: Coolant system with paper belt filter and magnetic separator- Included Accessories: 2x grinding wheel flanges, grinding wheel dresser, balancing stand with balancing shaft, 1x Röhm precision vise (PL-120S), 2x Röhm precision vise (PL-70S), hydraulic oil (approx. 80 L in canister)- Documentation: Complete machine documentation and service reports available Pedez D Tb Ropfx Alwerb

Condition: ready for operation (used), Year of construction: 1999, Suction capacity: 1000 m³/h Maximum static pressure: 2700 Pa Electrical connection: 400 V, 1.5 kW Space requirement: 855 x 655 x 1475 mm Pedpfx Alsz Eq T Tjwjrb Weight: 200 kg

Condition: used, mileage: 1,84,991 km, power: 199 kW (270.56 HP), first registration: 02/2002, fuel type: diesel, tire size: 13R22.5, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 8, suspension: steel, loading space length: 5,000 mm, loading space width: 2,370 mm, loading space height: 700 mm, Year of construction: 2002, Equipment: crane, trailer coupling, Technical information Number of cylinders: 6 GVW: 19.000 kg Drivetrain Drive: Wheel Prjdpfx Aljz Errwoweb Make of engine: Renault Axle configuration Tyre size: 13R22.5 Suspension: leaf suspension Rear axle: Double wheels Functional Mast: telescopic (2 parts) Make of bodywork: PALFINGER PK 9501 Tipper: Back = Additional options and accessories = - PTO - Tipper hydraulics

Condition: new, Hello, Prjdpfx Aezx Upzelwsb I would like to offer high-pressure KSB pumps with ABB electric motors. Applications for the pumps: - Chemical industry - Fuel industry - Gas industry - Paper industry I have various models available: - 5 units: MCPK150-125-200 VX LXM - 5 units: MCPK065-040-200 VC EXM - 2 units: MCPK100-065-200 VC LXM - 2 units: MCPK080-050-315 VC EXM The stated price is for 1 complete pump with motor, model MCPK150-125-200 VX LXM. If you are interested in a different pump model, please contact me.

Condition: used, Year of construction: 2000, grinding diameter 500 mm grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Podpfxexzk Nis Alworb Paper belt filter

Condition: as good as new (ex-display), UniTek Thyristor Controller Type 79 Classic Q3 400/450-15 UE 400 Psdpfxoh Dwg Us Alwjrb UA 450 ID 15A Ia 30A Control voltage 400 volts Weight 7.5 kg