Cylindrical Grinding Machine - Universal

KELLENBERGER KEL-VARIA UR 250-1000 Kelco120

Condition: excellent (used), functionality: fully functional, rotary table diameter: 600 mm, grinding height: 300 mm, disc diameter: 400 mm, grinding diameter: 600 mm, Manufacturer: ELB-SCHLIFF Model: SWR 50 T Dwodpfx Adju Ed Nlodjf Completely overhauled: 2008 Delivery time: immediate Grinding area: Ø 600 x 300 mm Grinding wheels: max. Ø 400 x 100 x 127 mm Spindle taper: 60 mm Installation dimensions: approx. 2800 x 2800 x 2300 mm (L/W/H) Total weight: approx. 5000 kg Control system: Siemens PLC

Condition: good (used), Year of construction: 2019, machine/vehicle number: 110-044731, Offer 25160 Technical data: - Load capacity: 3200 kg - Track gauge approx.: 9090 mm - Clearance height approx.: 360 mm - Beam length approx.: 2400 mm - Wheelbase: 1900 mm - Hook travel approx.: 6000 mm - Reeving: 2 / 1 - Speeds: - Trolley travel approx.: 20 m/min + 5 m/min - Hoisting approx.: 5 m/min + 0.8 m/min - Crane travel approx.: 20 m/min + 5 m/min Djdjw S D Emspfx Addowf - Operation via radio remote control - Crane total weight approx.: 1600 kg

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges Djdjucgr Ispfx Addjwf - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: good (used), Distance between centers: 1000 mm Center height: 175 mm CNC brand: FANUC Dwsdpjtrgn Tefx Addsf CNC model: Oi-TD

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. Dedpfoxt Ilfex Addewf TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: excellent (used), Year of construction: 1999, grinding length: 1,000 mm, Internal / External spindel Dedpfx Ajxy I Tvoddswf Collet device Schaublin with inserts Steady rest 5 - 80 mm Steady rest 3 - 120 mm Coolant system Filtration system Speeds head 1500 / 1700 / 2200  Centre height: 175mm Grinding Ø: 350mm Grinding length: 1000mm Grinding stone dimensions:400 x 50 x 127mm Grinding stone speeds: 1500 / 1700 / 2200Rpm Table inclasement: 9° Tailstock: 4Mk Cooling system: Yes Filtration: Yes Length: 2860mm Width: 1680mm Height: 1670mm Weight: 2500kg

Year of construction: 1991, condition: ready for operation (used), A Huron CNC bed milling machine is available. Travel X/Y/Z: 2400mm/1000mm/1000mm, control: Heidenhain TNC 415. An on-site inspection is possible. Dodev Ubp Repfx Addowf

Condition: used, functionality: fully functional, For sale Used Demag single girder overhead crane ± 11,360 mm x 1,600 kg We can optionally supply the cranes including: * adjust in length * Assembly and inspection * conductor rails * radio control Jan Reiling B.V. also supplies new cranes completely customized at very competitive prices. * overhead cranes * hanging cranes * jib cranes * KBK installations Dsdpfov Ippfsx Addowf * boat lifts All our new and used cranes that we supply (within NL and BE) are supplied including warranty! In addition, we have our own stock of approx. 15,000 Demag parts. For more information, see the website of Jan Reiling B.V. keywords: Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, bruckenkrane, workstation crane, lagerkrane, hebezeuge, cranes, universal crane, hoist. Overhead crane, laufkrane, overhead crane. Single girder, einträger, single girder Chain hoist, kettenzüge, chain hoists.

Year of construction: 1984, condition: good (used), functionality: fully functional, For sale Used Demag single girder overhead crane ± 11,370 mm x 1,000 kg We can optionally supply the cranes including: * adjust in length * Assembly and inspection * conductor rails * radio control Jan Reiling B.V. also supplies new cranes completely customized at very competitive prices. * overhead cranes * hanging cranes * jib cranes * KBK installations * boat lifts All our new and used cranes that we supply (within NL and BE) are supplied including warranty! In addition, we have our own stock of approx. 15,000 Demag parts. For more information, see the website of Jan Reiling B.V. keywords: Dwodov Iptwepfx Addef Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, bruckenkrane, workstation crane, lagerkrane, hebezeuge, cranes, universal crane, hoist. Overhead crane, laufkrane, overhead crane. Enke

Condition: new, Year of construction: 2024, operating hours: 40 h, functionality: fully functional, turning diameter over cross slide: 570 mm, turning length: 550 mm, turning diameter: 400 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,900 mm, total length: 3,010 mm, total width: 2,500 mm, turning diameter over bed slide: 570 mm, overall weight: 5,000 kg, bar passage: 87 mm, Equipment: documentation/manual, rotational speed infinitely variable, US wheeler LT300M New machine (stock machine) Further configurations and models from the manufacturer available on request. Equipment: Control: Siemens 828D Siemens drive components Centralized automatic lubrication system External housing Telescopic guideway cover Transformer Control cabinet Operator work area lighting Signal tower LCD monitor Linear guides Servo tailstock Hydraulic chuck Sauter tool turret with 12 driven tools (BMT55) Renishaw tool measurement system Machine operating manual Pneumatic air gun Dwjdjv Eu Aropfx Addsf Water gun Oil skimmer Chip conveyor and coolant tank Options: Workpiece measurement system Direct measuring systems Oil mist extraction system By equipping the machines with components from the world's leading manufacturers, we can not only ensure the reliability of our products but also provide high-performance and competent service with short response times. Before being delivered to our customers, all US wheeler machine tools undergo comprehensive quality and functionality testing at our premises.