Used Loroch 2016 Loroch Sw 630-St for sale (19,395)

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Itedjul T Uijpfx Agpjk Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2700 liters Machine dimensions in cm: Itedpfx Aeul Ua Togpsk Length: 190 Width: 375 Height: 210 Electric power: 14 kW

Condition: used, Year of construction: 2004, functionality: fully functional, HEIDELBERG ST100.2 STITCHING MACHINE Year 2004, second-hand, in excellent condition, cleaned and checked composed by 6 sheet feeders + cover feeder stitching station with 2 heads trilateral (trimmer) controls for signature pick-up and spine length Itsdpfx Agszr Halspek OPTIONAL: double centre-cut

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,489 h, load capacity: 1,400 kg, lifting height: 4,455 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,095 mm, fork length: 1,190 mm, drive type: Elektro, High-lift forklift Mast type: Triplex Transmission: Automatic Condition: Refurbished with warranty Technical condition: very good Front tire type: Polyurethane Front tire condition: New Rear tire type: Polyurethane Rear tire condition: New Battery voltage: 24V Battery capacity: 225Ah Itsdjw I H Snjpfx Agpsk Battery year of manufacture: 2024 Battery condition: 80 - 100% Description: Price includes new safety inspection, new paint job. The unit has been factory-reconditioned and includes a refurbished Q1 Toyota battery (approximately 1 year old with approximately 90% remaining capacity). Charger included with plug. We will gladly arrange cost-effective transport for you. Lease-to-own option available! SPECIAL PRICE! Initial lift, full free lift, CE certified.

Condition: used, Year of construction: 2011, operating hours: 19,630 h, functionality: fully functional, machine/vehicle number: 1263718, type of input current: three-phase, power: 400 kW (543.85 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, total height: 1,850 mm, total length: 3,090 mm, total width: 1,480 mm, fuel: biodiesel, overall weight: 4,500 kg, type of cooling: water, nominal power: 400 kW (543.85 HP), nominal power (apparent): 400 kVA, input frequency: 50 Hz, empty load weight: 4,500 kg, Equipment: documentation/manual, Two MWM cogeneration plants manufactured in 2011 are for sale. They are ideally suited for decentralized combined heat and power generation. Iedpfozudbfex Agpstk Key technical specifications of the MWM cogeneration plant, according to the documentation: Fuel used: biogas Generator: MarelliGenerators Engine: MWM GmbH Type: TCG 2016 V8 C Identification No.: 1263718; 1263719 Year of manufacture: 2011 Engine mechanical power: 415 kW Engine electrical power: 400 kW Thermal power: 398 kW Max. fuel consumption: 941 kW Speed: 1500 rpm Ignition system: Altronic ZS3 Ignition system No.: 3644 Ignition angle: 23.00 Ignition plug type: 12342688 Power regulation: multi-stage GEN-1: 19,440 operating hours GEN-2: 19,630 operating hours The cogenerators are sold with electrical and control cabinets, flue gas heat exchangers, emergency coolers, engine circuit pumps, heat exchangers and three-way valves, ventilation air systems, and acoustic containers.

Condition: ready for operation (used), Year of construction: 1989, Gear hobbing machine models FD-250, FD-500, FD-630, and FD-900 Manufacturer: CUGIR, ROMANIA Maximum module size: 6 to 12 mm Itodpfx Aszuddtogpek Max. working diameter: 250 to 900 mm Accessories: change gears and arbors for all machines Videos showing all machines in operation are available!

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" Iedexmthropfx Agpotk THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: used, Year of construction: 2023, operating hours: 2,594 h, functionality: unexamined, machine/vehicle number: 6000030, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 2,594 h KNOLL aerosol extraction system AerosolMaster 4000 ATS S/N 1580192 Year of manufacture: 2022 KNOLL chip conveyor 750 K-1 Itjdpfozbt D Dex Agpok S/N 1591356 Year of manufacture: 2023

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Ijdpfx Aozqt Umegpstk Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, fuel type: gasoline, color: red, empty load weight: 112 kg, HAKO SWEEPMASTER P800 SWEEPING MACHINE Manufacture year 2017 A new cylindrical brush combined with a new side brush provide excellent sweeping results. New rubber guards around the main roller ensure dust-free sweeping. High surface area performance of up to 4,350 m²/h. The machine is in perfect condition, both visually and technically. The machine has undergone a complete, meticulous overhaul. Each machine we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power: Petrol Theoretical capacity (m²/h): 4350 Working width (mm): 670 Isdozuk Tzjpfx Agpstk Working width with 1 side brush (mm): 870 Dust bin (l): 2x25 Working speed (km/h): 5 Filter surface area (m²): 1.5 Weight ready to use (kg): 112 Dimensions (L x W x H) (mm): 1200 x 850 x 715 INCLUDED: NEW cylindrical brush NEW side brush New roller guards Dust bin

Condition: used, functionality: fully functional, 4 pieces of Matsuura H-Plus 630 machine pallets, 800 x 800 mm, with hydraulic feed Itjdpoxn R Skofx Agpek

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Iedpfxey Sv S He Agpjtk

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 210 kg, arm reach: 2,696 mm, controller manufacturer: KUKA, controller model: KRC4, The KR 210 R2700 Prime is a high-performance 6-axis industrial robot offering a 210 kg payload and 2700 mm reach. Designed for versatility, it delivers exceptional precision and speed in handling, welding, machining, and heavy-duty applications. Frequently used in the following applications: - Palletizing -Depalletizing Isdpfxow Nayno Agpstk -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KR210 R2700 prime Condition: Used Year: 2016 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. ( Source: Kuka's Website )

Year of construction: 2019, condition: new, Brand C&U Group Shanghai Bearing Co Ltd Model: TM6307/41RS Year of manufacture: Unused Iodpeqa Anqefx Agpstk Weight (kg) approx 6790 net Number of pieces in stock 17350 ( approx ) Made in China Comments Contact us for min. quantity Terms of sale Contact us for min. quantity

Condition: used, Year of construction: 2017, STREUMASTER SW3 FC 3 Cubic Meter Lime Spreader / Soil Stabilizer Tank: • Year of manufacture: 2017 • 3 m³ tank capacity • Filling connection: 3" / 3" Spreading Unit: • Working width: 2,460 mm • Section widths: 3 x 820 mm • Spreading rate at 1 km/h: 1-50 kg/m² (with a binding agent density of 1 kg/liter) Weight and Dimensions: • Unladen weight: 1,250 kg • Dimensions: 1,600 x 2,550 x 1,990 mm Tractor Requirements: • Three-point hitch: Category 2 DIN / ISO 730 - 1 • Required hydraulic performance: 50 liters/min at 180 bar • Max. permissible hydraulic flow rate: 75 liters/min • Electrical system: 12 V - Loading possible! - One owner! - German machine! - Ready for operation! Errors and prior sale excepted! = More information = Itedpfswv H Nqex Agpsk Year of manufacture: 2017 Contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm Itodoyyzxhjpfx Agpek - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: excellent (used), Year of construction: 2015, PRATTO mesh welding line ( 3D mesh production line ) Technical data for the machine • 2 stands for feeding the cross and line wire • Wire diameter between 3 ÷ 4.2 mm • Fence dimensions between 1.2 to 2.5 m (example 1.2 x 2m, 1.5x2.5 m, 2.5 x 2.5 m) • Programable machine with CNC, where all the programs are stored • Power drive (including hydraulics + cooler) • Electric servo-motor driving system for fence transportation • Automatic stacking of fences (max. 50 pcs) Itsdszq Ez Sjpfx Agpek • Working speed up to 120 strokes/min (1 fence in 30 sec- depending of the dimension of the fence

Condition: used, Year of construction: 1962, Used Machine Year of manufacture: 1962 Features and technical specifications: Planing width: 630 mm Working height: 250 mm Table length: 1100 mm Vacuum port: 160 mm Iedpfx Aezk Nnijgpetk Blades: 4 strip planer blades The machine does not have a motor brake! Location: 63934 Röllbach Availability: available immediately

Condition: used, Year of construction: 1997, overall weight: 1,700 kg, KEYWAY CUTTING MACHINE CABE ST 300 CNC SIEMENS KEYWAY WIDTH UP TO 18 mm STROKE: 460 mm Y-AXIS TABLE TRAVEL: 370 mm CONTROLLED AXES: TABLE ROTATION AND Y-AXIS INCREMENT SPEED: 20-25-35-45-50-70 Itjdpfx Agozkkt Hspsk MOTOR POWER: 2/3 HP FEED MECHANISMS WEIGHT: 1,700 KG CE MARKING + CE DECLARATION OF CONFORMITY AND GUARDING WITH MICRON YEAR OF MANUFACTURE: 1997 MACHINE IN EXCELLENT CONDITION

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, type of input current: three-phase, power: 600 kW (815.77 HP), input voltage: 400 V, rotational speed (min.): 600 rpm, rotational speed (max.): 600 rpm, fuel: domestic gas H, overall weight: 25,000 kg, type of cooling: water, warranty duration: 1 months, nominal power: 630 kW (856.56 HP), input frequency: 50 Hz, Equipment: documentation/manual, We offer this ALC "DIESELMASH - CGU" DvGA-630 8CHN25/34 block-type gas cogeneration power plant in very good condition, manufactured in 2003. Manufacturer: ALC "DIESELMASH - CGU" Model: DvGA-630 8CHN25/34 Year of manufacture: 2003 Iedpfx Agozlwi Djpetk If you have any questions or need more information, please send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 22,192 h, TruPunch 3000 S11 Large Format STANDARD EQUIPMENT: • Robust C-frame • 2 clamping jaws • 18 tool stations • Foot switch for jaw closing • Programmable part flap with a maximum part size of 500x500 mm Punch head: ⦁ Servo-electric punch head ⦁ Hydraulic single-tool holder, 360° rotation ⦁ Programmable stripper (active / passive / repositioning) ⦁ Spray lubrication for punch ⦁ Punch slug extraction ⦁ Adjustable stripper force Control: ⦁ 17" touch screen ⦁ Teleservice via internet ⦁ Automatic shutdown Data transfer: ⦁ USB interface ⦁ Network connection Safety: ⦁ CE marking ⦁ Multi-beam light curtain ⦁ Quick shutdown of hydraulics Extended punching equipment: ⦁ Multitool function Iedpfezmfdrsx Agpotk ⦁ Deburring and rolling technology function ⦁ Thread forming function Extended machine equipment: ⦁ Sensor for part chute ⦁ Vibration-dampened mounting ⦁ Brush tables ⦁ Chip conveyor ⦁ One additional clamping jaw

Condition: used, operating hours: 5,485 h, mileage: 98,662 km, power: 118 kW (160.44 HP), first registration: 03/2014, overall weight: 11,400 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 5,500 kg, empty load weight: 5,900 kg, wheelbase: 1,800 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro5, loading space volume: 5 m³, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, power assisted steering, soot filter, * German vehicle * 1st owner * In 2024, €18,000 was invested in the technology (invoice available) * Only 5,965 operating hours Isdpfoy Himyex Agpstk * Original 98,662 km * Condition as shown in photos * 3-disc brush system * Adjustable/movable brush system * Working width up to 3.40 m * Disc brush diameter: 750 - 900 mm * Pre-spray system * Suction hose diameter: 225 mm * 5 m³ stainless steel debris container * 600 l water tank * Discharge height: 850 mm * Joystick control * Air conditioning * EasyDrive (hydrostatic drive) (SN) * Maximum speed 50 km/h * Reversing camera * Air-suspended comfort seat * LED work lights * Iveco 4-cylinder diesel engine * 118 kW / 160 hp * 3,920 cc displacement * Beacon lights * Stereo CD * 120-liter diesel tank * GVW 11,400 kg * Curb weight: 5,900 kg * Payload: 5,500 kg If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer generally is WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You will find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We strongly offer and recommend an inspection and thorough check of the goods to prevent any possible misconceptions regarding their condition and suitability. Inspection and checks are possible at any time by prior arrangement and are expressly encouraged. All information provided is without guarantee. No liability is accepted for mistakes or inaccurate details in this listing. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: used, Year of construction: 1969, functionality: fully functional, machine/vehicle number: 8293 0769, grinding length: 1,200 mm, grinding width: 300 mm, table length: 2,300 mm, table width: 250 mm, -WR 109- Offered here is an ELB Schliff SW 12 VA I surface grinding machine. The machine is in good condition and fully functional. Itedeznb Sbspfx Agpjk The surface grinding machine features a hydraulic table. Technical data: Magnetic clamping plate: approx. 1200 mm x 300 mm Clamping area: 2300 mm x 250 mm Max. working height with new grinding wheel: 400 mm Max. working height with used grinding wheel: 400 mm Grinding wheel diameter: 300 mm Spindle motor speed: 1440 rpm Hydraulic motor speed: 1420 rpm Crossfeed motor speed: 930 rpm The machine is currently located in an external warehouse near Solingen. Inspection appointments with the machine running can be arranged up to July 31, 2026.

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: C 97 12 06, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,050 mm, overall weight: 6,500 kg, number of support arms: 2, Equipment: angle stop, Hydraulic shear – AMADA, GPX 630 model. Cutting length: 3100 mm x 6 mm, fully CNC controlled. Adjustable blade angle and blade gap, set by the computer after entering the material thickness and length. Sheet metal cutting range: 0.4 - 6 mm. CNC back gauge with a travel distance of 10 - 1050 mm, retraction, and programmable. Machine with automatic support for long sheets of cut metal at the rear. Raising and lowering rear back gauge. Machine weight: 6.5 tons. 2 supports and a square bar at the front of the machine. The shear is regularly serviced. The machine has been used sporadically for the past 10 years. Service documentation and the machine manual are available. Itjdezdzkcepfx Agpek If you have any questions or require further information, please send a message or contact us by phone.

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg With Electric Screw Drive 1. Screw drive power: 117 kW Itedpfjztpkpex Agpek 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC