Used Mark Screw Compressor S015464 for sale (12,287)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. Gbsdpfx Ajzu Aibep Dou It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), type of cooling: water, Equipment: documentation/manual, type plate available, New Boge S 75-4 LF screw compressor, 5/2026, for sale due to a project being cancelled (new value €50,000), now €20,000. Gbedpfx Apsz Dpu Ho Deu Please note: this is a water-cooled machine.

Condition: used, Year of construction: 2014, operating hours: 34,146 h, Atlas Copco GA15+ Screw Compressor For sale is a screw compressor manufactured by Atlas Copco, model GA15+. This compressor is ideal for industrial and commercial applications and is known for its reliability and durability. Technical specifications: Manufacturer: Atlas Copco Model: GA15+ Type: Screw compressor Year of manufacture: 2014 Operating hours: 34,162 h Note: Gbjdpfxsybbchs Ap Deu All information is provided to the best of our knowledge, but without warranty. If you are interested or have any further questions, please do not hesitate to contact me.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Gsdpfszwmlrjx Ap Dobu Technical specifications: Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Condition: excellent (used), Year of construction: 2004, S016550 PROD. RENNER TYPE RSK37 S/N 8470 YEAR 2004 POWER (kW) 37 OUTPUT (m3/min) 6.15 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 7166 / 25832 Gedpfx Asz Elfdsp Dsbu FREQUENCY CONVERTER no BUILT-IN DRYER yes EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1' NEW/USED USED

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, Hello, For sale: SCS 30-08A screw compressor. In good working order. Ready for use. Godszhux Uepfx Ap Djbu The price stated in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Please contact us by phone between 7:00 AM and 3:00 PM.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Technical specifications: Type: S220 Godpfx Apjw Rd Avo Dobu Operating hours: 54,947 h Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Power: 160 kW Next maintenance: in 1,000 h.

Condition: used, Year of construction: 2007, operating hours: 73,989 h, functionality: fully functional, power: 25 kW (33.99 HP), volume flow: 5.27 m³/h, pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, For sale is a used KAESER rotary screw compressor, model ASD 47 SFC, with a 25 kW drive power, frequency control, and a heat exchanger for heat recovery. The integrated heat recovery system allows the heat generated during compressor operation to be used, for example, to heat domestic hot water, heating water, or for other operational heat processes. This enables the efficient reuse of the waste heat generated during operation. Technical data: Manufacturer: KAESER Kompressoren Type: ASD 47 SFC Year of manufacture: 2007 Serial number: 3705 Rated power: 25.0 kW Gjdpfx Ajz Eqa Tep Dsbu Motor speed: 3,000 rpm Max. operating pressure: 8.5 bar Frequency-controlled drive: SFC Control system: KAESER SIGMA CONTROL Heat exchanger for heat recovery Ambient temperature: 3–45 °C CE marking present Operating hours according to display: approx. 73,989 h Load hours according to display: approx. 72,914 h

Condition: excellent (used), Year of construction: 2015, KAESER SX 8T screw compressor with air dryer, after service. Technical data: capacity: 0.68 m3/min (680/min); engine power: 5.5 kW; pressure: 11 bar; operating hours: 7890 h; year: 2015. The compressor is in full working order. Gbsdpsyt H Sfofx Ap Dsu We provide service support. Below is a link to a video showing the machine in operation.

Condition: excellent (used), ABAC SPINN compressor Air dryer, Tank: 270 liters, 7.5 kW motor, Pressure: 10 bar, Weight: 250 kg. Gsdpfxoz Epd Do Ap Debu

Condition: excellent (used), Year of construction: 2019, Equipment: compressor, ATLAS COPCO XAS88 COMPRESSOR, 5.2 m3, 2019 Gbodordf Swopfx Ap Dou DIESEL compressor ATLAS COPCO XAS 88, fully serviced Technical specifications: capacity: 5.20 m3/min; operating pressure: 7 bar; year of manufacture: 2019; engine: KUBOTA operating hours: 1519 h!!! compressor in fully working order Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2015, S015502 PROD. KAESER TYPE ASD35 S/N 2556 YEAR 2015 POWER (kW) 18.5 CAPACITY (m3/min) 3.16 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 49901/49225 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER yes COOLED (AIR/WATER) air/water Godpfx Asz D D Afsp Dobu ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: excellent (used), Year of construction: 2020, S016059 PROD. ALUP TYPE SCK30 CE S/N ITJ370650 YEAR 2020 POWER (kW) 22 CAPACITY (m3/min) 3.22 m3/min PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 0 (new controller) INVERTER NO BUILT-IN DRYER NO EXCHANGER NO Gjdpsz A Tm Dsfx Ap Djbu COOLED (AIR/WATER) AIR ON TANK NO DOCUMENTS YES CONNECTION NEW/USED Used

Condition: excellent (used), Year of construction: 2023, volume flow: 1.06 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, pressure: 10 bar, SCC SMART 7 screw compressor Gsdpfjz N Ah Eex Ap Dobu 7.5 kW motor Capacity: 1.06 m³/min Pressure: 10 bar Year of manufacture: 2023 Operating hours: 902 Compressor has been serviced, with filters and oil changed.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Hello, For sale: a SCS 30-08A screw compressor. In working order. Ready for use. We have 3 units available. The price stated applies to 1 unit. The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Contact us by phone between 7:00 AM and 3:00 PM. Gbsdpfx Aszhux Iop Deu

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 270 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 270 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 270 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. Gsdpfxomqlpre Ap Dsbu The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Compressor dimensions 1320 × 650 × 945 mm Dimensions with tank 1495 × 1200 × 1545 mm Weight 350 kg

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor 225 Kw Year 2012 Gedpfx Apsu Ic Ryj Debu

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, overall weight: 264 kg, power: 11 kW (14.96 HP), fuel type: electric, operating pressure: 8 bar, pressure (max.): 8 bar, ambient temperature (max.): 40 °C, protection type (IP code): IP65, Equipment: refrigerant dryer, type plate available, Well-maintained screw compressor, Atlas Copco Make: Atlas Copco Model: GA 10 FF (with integrated cooling dryer) Year of manufacture: 1999 Floor-mounted model Control: Elektronikon Maximum operating pressure: 8 bar Motor speed: 3000 rpm Rated power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 264 kg Gbedpfx Apswziduo Dju

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Gbjdpfxohy Tzys Ap Deu Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: like new (used), Year of manufacture: 2023 Type: SMART 7 Serial number: 202210301 Operating hours: 1,160 h Gbodozwxp Aepfx Ap Dju Load hours: 452 h Pressure: 7.5 bar Flow rate: 1,060 l/min Connection: 7.5 kW Pressure vessel Pressure: 13.8 bar Temperature: 0 to 150°C Condition: as new Weight: 240 kg Dimensions: 900 x 600 x 1,040 mm

Condition: ready for operation (used), Year of construction: 2000, We offer Atlas Copco compressors: Type GA 55 Pressure: 10 bar Motor power: 55 kW Gedpfx Apszvx Trj Dobu Year of manufacture: 2000 Compressor with documentation

Condition: excellent (used), Year of construction: 1998, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 01100145, noise level: 70 dB, Used compressed air compressor Brand: Worthington creyssensac Model: RLR 75A5 AIR Year: 1998 Godpsrg Dcuofx Ap Djbu Serial No.: 01100145 Working hours: 7358h Features: - Rated power: 55kW/75HP - 8 bar maximum pressure - Flow rate: 573 m3/h - Sound level: ± 70dB - Weight: ± 1.179 - Ø compressed air outlet: 2" - Total weight: 1170kg

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Godpsztl Udefx Ap Dobu

Year of construction: 1994, condition: good (used), Manufacturer: Boge Godpehtq Dvefx Ap Dsbu Type: V LEX 45 Engine: 45 kW Capacity: 6.5 m³/min

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: A34902974, Equipment: type plate available, Technical details: Voltage: 400V Phase: 3 Frequency: 50 Hz Volume flow: 12.44 m3/min Speed: 3000 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 10 bar g Full load current: 174.3 A Gbsdpfxewrq Ics Ap Deu The CompAir screw compressor L75-10A is a powerful and reliable solution for generating compressed air in industrial applications. With its robust design and modern technology, this compressor ensures stable and efficient compressed air supply that meets the high demands of various operations. Thanks to its compact design, the L75-10A can be easily integrated into a wide range of systems and provides long-lasting, reliable performance.