Screw air compressor

Kaeser SM 9

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 Lhedpfx Asx R Em Dobysl T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: used, Year of construction: 2017, functionality: fully functional, bending force (max.): 36 t, TRUBEND CELL 7000 High-End Aut. bending cell Year of construction: 05/2017 ADDITIONAL Functions: ToolMaster Bend (incl. Tool Identification System - TIS) Tool gripper for faster tool change (only in conjunction with ToolMaster Bend and gripper changing module) Conveyor belt Additional system pallet Additional mechanical gripper (without jaws) Additional jaws for mechanical finger gripper Gripper changing module incl. tool cleaning station Multi-suction device with flat suction cups and electromagnets TCB - Thickness Controlled Bending STANDARD configuration: TruBend 7036 Cell Edition Ledpeyalx Rofx Abyohl - Stable Machine frame - Electro-mechanical direct drive (torque motor) - 6-axis backgauge system with stop sensor - Segmented Wila tool clamps without Tool Identification System - TIS ATTENTION: lower tool clamp in the same design as the upper tool clamp - Switch cabinet air-conditioning BendMaster (15) - Stable frame and manipulator - Bearing load: 15 kg, max. sheet load: 3 kg - Floor tracks: Welded construction with stable guide rail. Travel 3215 mm - Gripper coupling at BendMaster - Electrical drives - Mechanical finger gripper with jaws LoadMaster Bend - Handling system - Multi-suction device with bellows suction cups - Double sheet detection and separation - Transfer station - System pallet Safety - Safety cell with swing sliding doors: The complete working and danger zone is safeguarded by a safety cell Lighting Control system - PC control with 19“ Touch screen - Mobile operating terminal - Network connection - Teleservice via Internet

Condition: used, Year of construction: 2014, operating hours: 43,665 h, functionality: fully functional, machine/vehicle number: 15175183874, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, operating hours of spindle: 17,437 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 5-Axis Traveling Column Milling Machine DMG MORI DMF 180-7 | Year of Construction 2014 | B-Axis & Integrated Rotary Table For sale is a high-precision 5-axis traveling column milling machine from the manufacturer DMG MORI, model DMF 180-7, from the year 2014. The machine is extensively equipped and features a B-axis (swivel head) and a rotary table integrated into the fixed table for complex machining operations. General Machine Data * Manufacturer: DMG MORI * Model: DMF 180-7 * Year of Construction: 2014 * Machine Number: 15175183874 * Operating Hours: 43,665 h * Spindle Hours: 17,437 h * Machine Weight: approx. 13,250 kg Working Area & Dynamics * X-Axis: 1,800 mm * Y-Axis: 700 mm * Z-Axis: 700 mm * Rapid Traverse: 40 m/min * Acceleration: 4 m/s² Control System * Type: 3D Control Siemens SINUMERIK 840D sl * Control Panel: ERGOline Control with 19" screen * Software Options: Surface interpolation TRACYL, COMPCAD compressor function (for HSC machining), 3D machining/tool correction, turning-milling cycle Spindle & Milling Head (5-Axis Configuration) * Head: Swivel head (B-axis) * Speed: 20 to 14,000 rpm * Spindle Power: 18.9 / 14 kW (40/100% ED) * Tool Clamping: SK40 according to DIN 69871 Tool Table * Design: Fixed table with centrally integrated rotary table * Clamping Area Fixed Table: 2,100 x 700 mm * Rotary Table Diameter: 750 mm * Max. Load Capacity Rotary Table: 500 kg Tool Changer * Magazine Capacity: 60 positions SK40 * Type: Chain magazine with dual gripper Lhjdpszyplgofx Abyel * Chip-to-Chip Time: 7.6 s Coolant, Disposal & Extraction * Internal Coolant Supply (ICS): 40 bar / 980 l system with paper band filter * Chip Disposal: Chip conveyor (drag chain) * Extraction: Oil and emulsion mist separator (1,600 m³/h) * Additional Functions: Air blow through the spindle center (via M-function), coolant gun for chip flushing Additional Equipment & Measuring Technology * Measuring Probe: Infrared measuring probe TS649 DMG * Kinematic Measurement: Preparation for 3D quickSET Toolkit * Cabin: Full cabin with operating mode 4 From an insolvency proceeding, sale in open auction. Offer deadline until September 30, 2026, 6:00 PM. Package price for several machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH website under Auctions.

Condition: like new (used), Year of construction: 2016, operating hours: 390 h, functionality: fully functional, type of input current: three-phase, overall weight: 827 kg, Carrier water chiller Model: 30RBS-140B0181-ME, year 2016, R410A. 135 kW (116,100 frigories), cooling only, maximum consumption: 61 kW. Dimensions: 2258x2050x1330 mm, plate heat exchanger, weight: 827 kg. Machines fully tested in our warehouse with gas, inspection possible. Reference: 1137. Lsdpfx Aoyfwuzjbyohl

Condition: excellent (used), Year of construction: 2009, operating hours: 29,000 h, functionality: fully functional, Equipment: documentation/manual, The INDEX C200 – manufactured in 2009 – is a powerful CNC production turning center with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a high-quality 3-turret design, with turrets 1 and 2 each equipped with X, Z, and Y axes, and turret 3 used for machining on the counter spindle. All three disc turrets are equipped with 10 stations and, with driven tools up to 6,000 rpm, enable highly flexible complete machining. With a portal parts handler, conveyor belt, C-axes on the main and counter spindles, and powerful spindle drives, the machine is particularly suitable for productive series production of complex turned/milled parts. Control: FANUC 31i Design: Machine with 3 tool holders / 3 disc turrets Bar capacity: 65 mm Machine bed: Vertically arranged gray cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Lhsdey Tmhzopfx Abyel Spindles Main spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis: 700 mm travel Rapid traverse Z-axis: 50 m/min Tool holder / Turret Design with 3 disc turrets, each with 10 stations. Tool system with 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool holder 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (according to documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment according to documentation Portal parts handling system with numerically controlled Z-axis Workpiece removal from main or counter spindle to conveyor belt Removal of scrap material from the main spindle into a scrap container Portal parts handler: Traverse speed: 100 m/min Traverse range: 70 mm Workpiece diameter max.: 90 mm Workpiece length max.: 250 mm Scrap length max.: 250 mm Workpiece weight max.: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Coolant circuit: Flow rate: 19 l/min Coolant unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 5,800 h, functionality: fully functional, cooling capacity: 160 kW (217.54 HP), type of cooling: air, power: 260 kW (353.50 HP), heating capacity: 160 kW (217.54 HP), aircooled Multipipe Chiller Trane CMAB HSE 185 cooling and heating in the same time Cooling cap.160 KW (47 refr.tons), Heating 160KW (47 refr.tons) 2 circuits with 4 scroll compressors,inverter driven Plate evaporator, with integrated 2 pumps R 410a, low hours Ledpfewy Dn Sox Abyshl tested,ready for operation

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 Ljdpfofupadsx Abyshl - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: Lhsdpfxezkmqze Abysl pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: good (used), mileage: 1,67,000 km, power: 405 kW (550.65 HP), first registration: 04/2014, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: EBS, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), parking heater, trailer coupling, = Additional options and accessories = - Air Suspension Seats Ljdpsy I U R Hofx Abyjhl - Aluminium fuel tank - Cabin - Climate control - Coupling - Disc brakes - Heated Mirrors - Heavy duty engine brake - Passenger seat - PTO - Radio/cassette player - Radio/Cd/Audio system - Refrigerator - Side skirts - Stability control - Sunroof - Toolbox - Vehicle heater - Voice Control = More information = Front axle: Steering Rear axle 1: Lift axle; Steering Empty weight: 22.375 kg Carrying capacity: 13.225 kg GVW: 35.600 kg CE mark: yes Technical condition: good Visual appearance: good

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Ledpfx Asinur Aobyjhl Height: 1000mm Volume: 1.5m³/min Power: 11kW