Used Massi Scale 24370 for sale (2,308)

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg Hfjdpfx Aez I Nbbsg Ssn AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, including option KIT 50 Includes automatic wire changer AWC Wire EDM machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes glass scales for X and Y axes VISION 5 control 15" LCD color screen, jog shuttle and mouse Includes Conic-Plus option for improved taper Includes Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We would be happy to perform an individual test cut. We also offer on-site commissioning and training for this machine.

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. Hedpoz Eh Nrofx Ag Sjfn The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment • Air blast through spindle • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe • Chip flushing system • Chain-type chip conveyor Hfodpfoz Ea Sxjx Ag Sjn • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits • Condition: very good, low operating hours • Ready for tests Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine • Table size: 1300 × 610 mm Extra Information Additional equipment Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Equipment and technical data: Cutting length: 5300 mm Hsdpfx Asz Dyd Esg Ssfn Cutting height: 2200 mm with Super Cut scoring device Includes: intermediate workpiece support on 3 supports Includes: 2 units of longitudinal stop with manual scale Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T Hfjdpez Hd R Iefx Ag Ssn engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: used, Year of construction: 2005, Working width: 630 mm Planer shaft: strip knives Hedpsyvz Nxefx Ag Sofn Number of knives: 4 Jointer table length: 2200 mm Jointer fence angle adjustable: yes Folding up jointer tables: manual Maximum thicknessing height: 220 mm Thickness table height adjustment: electric Display of planing thickness: scale Feed speed: 7 / 14 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: segmented Table rollers: yes Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2200 mm Machine width: 1150 mm Weight: 1250 kg

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 20,809 h, load capacity: 25,000 kg, lifting height: 4,060 mm, fuel type: diesel, mast type: simplex, construction height: 3,800 mm, fork carriage width: 3,050 mm, fork length: 2,340 mm, empty load weight: 34,800 kg, total length: 6,300 mm, drive type: Diesel, construction width: 3,050 mm, Diesel forklift Load center: 1200 Hjdpjz Ev T Ejfx Ag Ssfn Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG 250-12LB. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We also gladly offer consignment sales for your vehicle. Side shifter, fork positioner, Heater, full cabin, scale.

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Hsdpfxjz E Rbde Ag Sjfn Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Hfjdpfx Agsz Hq Rbe Ssn Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Brand new never used. Please check out our other listings as well.

Condition: used, Year of construction: 1973, functionality: not functional, machine/vehicle number: 1709, SIP MUL-1000 universal length measuring machine with a comprehensive set of original SIP accessories. Hsdpfxszz Hq Ao Ag Sjfn Manufacturer: SIP – Société Genevoise d’Instruments de Physique, Geneva/Switzerland Year of manufacture: 1973 Machine number: 1709 Measuring range: approx. 1,000 mm The machine is offered expressly in its current condition, without any guarantee regarding functionality or accuracy. Oil was detected in the area of the scale/measuring system. A detailed fault diagnosis or repair has not been performed. Therefore, the machine is not sold as being in working order. Inspection and your own technical assessment on-site in Mönchengladbach are strongly recommended.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 1,900 mm, total width: 1,500 mm, overall weight: 1,200 kg, spindle speed (max.): 6,300 rpm, product length (max.): 1,600 mm, number of axes: 3, This 3-axis MACMON M 454 V CNC was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 250 mm, and Z-axis travel of 400 mm. The machine is equipped with a spindle speed of 6300 rpm and a hydraulic tool clamping system. If you are looking to get high-quality machining capabilities, consider the MACMON M 454 V CNC vertical machining centre we have for sale. Contact us for further details. • Tool Clamping: Hydraulic • Measuring System: Linear glass scales on all axes • Voltage / Operating Voltage: 380 V • Frequency: 50 Hz • Control Voltage: 24 V • Connected Load / Power: 11 kW • Nominal Current: 23 A • Dimensions (L x W x H): 1600 mm x 1500 mm x 1900 mm - Weight: 1200 kg Hodpfx Aez Nhu Reg Sofn • Optional Equipment (Not included) - WNT vise (HDG2 125) - 20x SK tool holders in various designs (ER and Weldon) in very good condition - Storage box/rack for tool holders

Condition: good (used), Komatsu HD405-7 Year 2007 S/N 7263 Hfodpfx Asz Rp Hqog Son Hours 28,200 h Sprinkler system Reverse camera Tire Size 18.00 R33, tread depth from 40% to 90% on all tires Loadtronic Scale Sprinkler system Reverse camera Total Weight 34,940 kg Max. Volume 27.3 m3 Max. Load 40,000 kg Engine Type SAA6D140E-5 Engine Power 371 kW Engine Manufacturer Komatsu Top Speed 70 km/h Transport Dimensions 9500x3800x4300 mm Original Color Yes Technical Data: Year of Manufacture: 2007 Operating Hours: 28,200 h Serial Number: 7236 Engine Manufacturer: KOMATSU Engine: SAA6D140E-5 Emission Stage: Stage V / Tier IV Final Drive Type: Diesel Maximum Speed: 70 km/h Certificates: EPA, CE Delivery Condition: EXW Location: Bro, Stockholm County, Sweden Equipment: Air conditioning, Fire suppression system, Main power switch, Rotating warning light, Diesel heater, Dump body extension, Dump body heating, Dump body heating system, Dump body extension

Condition: good (used), Komatsu HD405-7 Year 2013, S/N 7817, Hours 22,900, Sprinkler system Rearview camera Hsdpfx Aoz Rp H Rog Ssfn Tire size 18.00 R33, tread depth from 40% to 50%, good condition Loadtronic scale Sprinkler system Rearview camera Total weight 34,940 kg Max. volume 27.3 m3 Max. load 40,000 kg Engine type SAA6D140E-5 Engine power 371 kW Engine manufacturer: Komatsu Top speed 70 km/h Transport dimensions 9500x3800x4300 mm Original color: Yes Technical data: Year of manufacture: 2013 Operating hours: 22,900 h Weight: 34,940 kg Serial number: 7817 Engine manufacturer: KOMATSU Engine: SAA6D140E-5 Emission stage: Stage V / Tier 4 Final Drive type: Diesel Maximum speed: 70 km/h Certificates: EPA, CE Delivery condition: EXW Location: Bro, Stockholm County, Sweden Equipment: Air conditioning, weighing system, fire suppression system, main switch, rotating warning light, diesel heater, body raising system, body heating.

Condition: used, CNC Wire EDM Machine AccuteX AU-1000iA | Year 2007 | Large-Scale For sale: a professional, reliable, large-scale wire EDM machine from the renowned Taiwanese manufacturer AccuteX, model AU-1000iA. This machine is ideal for machining large and heavy parts, producing injection molds, dies, and tools with the highest precision. TECHNICAL SPECIFICATIONS: Hjdpjzt Sinefx Ag Sofn - Manufacturer: AccuteX - Model: AU-1000iA - Year of manufacture: 2007 - CNC control: Proprietary AccuteX (Windows CE) - Working travels (X × Y × Z): 1100 × 650 × 400 mm - Travels in cone axes (U × V): 150 × 150 mm - Cone cutting angle: ±21° (for height H=100 mm) - Maximum workpiece weight: up to 5000 kg (fixed table design, moving column) - Supported wire diameters: 0.15 - 0.33 mm - Machining type: Submerged KEY FEATURES AND BENEFITS: - T-Base construction: Extremely stable body made of Meehanite castings, damping vibrations and resistant to thermal and mechanical loads. - Optical (glass) linear scale system guaranteeing repeatability and positioning accuracy at the micro scale. - Original AccuteX Wire Alignment Device for wire centering/positioning (in a dedicated box with wiring). INCLUDED WITH THE MACHINE – A RICH SET OF AUXILIARY EQUIPMENT: - Professional set of EDM clamping elements: numerous clamps, clamping jaws, positioning screws, and pins. - Precision strips and base beams for quick mounting of large parts and molds on the work table. - Additional consumable accessories and wire guiding mechanism components.

Year of construction: 2005, condition: excellent (used), Vertical block mould machine: Kurtz mod. Ecomat Basic data: • Year of production: 2005 • Block dimensions (LxWxH): 1060x1320x5200 mm The set includes inlays (height reducers) for blocks: - 1060x1320x5130 mm - 1060x1320x4000 mm • Electrical power demand: 400V; 50Hz Hfjdpfexq N Amox Ag Son • Operation silo • Roll out conveyor • Block scale • Inkjet printer • Complete documentation We also have for sale other machines for EPS (expanded polystyrene) production, such as: •steam generator •steam accumulators with capacity •3x cutting lines •3x blockmolds •pre-expander It is also possible to purchase a complete production line (including installation, commissioning, and staff training).

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System Hfsdpfoz R Tr Sex Ag Ssn 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: emergency stop, Extensive recycling and sorting plant with conveying technology, sorting technology, and steel structures Due to a planned restructuring of our recycling facility, we are offering extensive parts of our existing recycling and sorting plant for sale. The plant consists of two processing lines and includes a variety of different conveyor belt systems, sorting technology, and the associated steel structures and supporting frameworks. The scope of sale includes, among other things: Conveying technology: Chain belt conveyors Slider belt conveyors Trough belt conveyors Articulated conveyors Numerous other conveyor belts in various sizes and designs Sorting and plant technology: 3 TOMRA/TITECH NIR sorting machines (1000, 1400, and 2000) Separation drum Belt scales Sorting cabin for manual sorting Control room Steel structures and other plant parts: Steel structures and supporting frames Substructures and platforms Walkways and connecting structures Hfjdjz R Dcgjpfx Ag Sen Ventilation and heating system Dust extraction system from NESTRO Other existing plant components and accessories upon agreement The components offered come from a recycling and sorting plant for the processing of commercial waste and the production of alternative fuels (EBS). Due to the extensive plant inventory and the large number of conveyor belts and individual components, we have deliberately refrained from providing a detailed list of all technical data. We strongly recommend a personal on-site inspection. Interested parties will have the opportunity to gain a comprehensive overview of the entire plant, the available components, and their actual condition. Further information: Location: Munich, Germany Inspection: By prior appointment Planned plant dismantling: From January 2027 Sale: Preferably as a complete package Price: On request If you are seriously interested in purchasing, we look forward to hearing from you and would be happy to arrange an inspection appointment.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035492, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2024, next inspection (TÜV): 04/2027, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 80 %, color: silver, Attention: the pictures are archive images. The vehicle may be in use! #Container semi-trailer chassis - Fine-grain steel welded construction, gooseneck plate with replaceable 2" kingpin and 2 kingpin positions - Container positions: - Rear extension retracted: - 1 x 20 ft or 1 x 30 ft flush with rear - Central telescope stage 1, rear extension extended stage 1: - 2 x 20 ft or 1 x 40 ft with gooseneck tunnel - Central telescope as nested central tube frame with pin locking - Front cross member with folding locks (not available with front extension) - Without rear height adjustment and without folding centre supports; transport of containers without tunnel not possible - Rear extension mounted on rollers, with hand crank Hfjdpfx Ajz Nglhog Son - 24 t 2-speed landing gear, one-side operation, with semi-round feet and straight mounting plate, with thrust compensation - 2 wheel chocks with holder - Side underrun protection, aluminium - Underrun protection, galvanised steel - Extendable underrun protection for 45 ft containers - Half-shell mudguards - with anti-spray mud flaps according to EC - Rear impact protection #Axles + suspension - BPW disc brake axles with 430 mm disc diameter - Axles/running gear laser-aligned: reduces tyre wear and fuel consumption - Staggered axle spacing 1410/1310 mm (combined transport) up to 44 t gross combination weight - Air suspension - 1st axle automatic lift axle, incl. forced lowering and traction help, activation "3x braking" (traction help functions up to 30% axle load excess and up to max. 25 km/h) #Braking system - 2-line compressed air braking system - Colour-coded line routing for easy servicing - Spring brake parking brake - Tele Control - Axle load relief for easy telescoping - 2 mismatch-proof coupling heads at front, without connecting line - EBS, electronic braking system with EBS socket at front, without connecting cable - Test connection for brake cylinder pressure on EBS module routed to the outside - Attention: the trailer may only be towed by towing vehicles that ensure ABS effectiveness! - with raise & lower valve + auto-reset function - Vehicle driving stability system - Axle load detection via EBS CAN bus signal for display in the driver's cab; truck must be prepared accordingly, nothing installed on the tractor unit (not a calibrated scale) #Wheels and tyres - 385/55 R22.5", make at manufacturer's choice - Steel rims, factory silver #Electrics - 24 V, 4 x 3-chamber lamps + 1 round reversing light + 1 round rear fog light, full LED with resistor, yellow LED side lighting, LED number plate lighting (note: with certain towing vehicles false diagnostics may occur although the function is given) - 2 white LED front position lights - 2 white/red LED outline marker lights at rear - 1 x 15-pin socket at front, without connecting cable - 2 additional LED work lights at rear, switched via reversing light Attention: archive images!

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 168 kg, temperature: 155 °C, Kärcher HDS 10/20-4MX Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A built-in high-pressure hose reel makes winding and storage easy. A durable brass pump head with new ceramic pistons and seals ensures long, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With operating parameters of 200 bar and 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Model: HDS 10/20-4MX Supply voltage: 400 V ~ 3-phase Flow rate (l/h): 500 – 1000 Hodpez Nguiofx Ag Sefn Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 20 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 EQUIPMENT: Built-in hose reel NEW heavy-duty high-pressure gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in detergent tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other lines. The exhaust gas temperature sensor shuts down the engine if the temperature exceeds 300°C. When the eco!efficiency function is activated, the unit heats the water to 60°C, enabling effective cleaning—even of heavy soiling—while reducing fuel consumption by approximately 20%.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Hfedpfeq H Sqdsx Ag Sen Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: good (used), Year of construction: 2009, Ref. -No.: 10662 Manufacturer: STARRAG HECKERT Type: HEC 1250 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 221XXX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Spindle Diameter: 100 mm Max. Tool Weight: 35 kg Max. Tool Length: 800 mm Max. Tool Diameter: 250 mm Clamping Area: 1000 x 1250 mm Tool Piece Magazine With: 60 Pcs./pcs. Hfjdpfx Agsz Adt Rj Son Max. Torque: 25.000 Nm Turning Speed Range - Stepless: 40000 mm / min Rapid Traverse: 40 m / min Numbers Of Pallets: 2 pallet change time: 47 s Weight Of The Machine Ca.: 26,5 t Position uncertainty P: 0,008 mm Position deviation Pa: 0,006 mm Positional dispersion Ps: 0,005 mm Maximum table rotation: 10 RPM Further information: - Design: Thermally symmetrical column design with optimal chip flow for machining castings. - Applications: Mechanical engineering, energy technology, and the machining of large gearboxes and engine components. - Powerful motor spindle (up to approx. 82 kW, depending on the model) for heavy-duty machining. - The Heckert HEC 1250 Athletic (built in 2009) is a high-performance, modular 4-axis large-scale machine for the precise complete machining of heavy workpieces. The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Hjdpfez Sqq Tox Ag Sofn Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Condition: repair required (used), Year of construction: 2017, operating hours: 100 h, functionality: limited functionality, machine/vehicle number: G00071501, travel distance X-axis: 150 mm, travel distance Y-axis: 50 mm, input voltage: 230 V, type of input current: AC, feed length X-axis: 150 mm, feed length Y-axis: 50 mm, measuring range X-axis: 150 mm, measuring range Y-axis: 50 mm, total height: 1,300 mm, total width: 500 mm, total length: 600 mm, space requirement height: 1,500 mm, space requirement length: 600 mm, space requirement width: 6,000 mm, overall weight: 30 kg, path measurement accuracy: 1 mm, table length: 600 mm, table height: 700 mm, input current: 5 A, Equipment: lighting, Analog profile projector from Mitutoyo. Very easy-to-use measuring device with high accuracy of 0.001 mm. Workpiece height approx. 110 mm. It has been used rarely. Hsdsz Srf Espfx Ag Sjfn The X-axis shows an error and needs to be repaired. The replacement part costs for the scale are approximately EUR 700.

Condition: repair required (used), Universal Milling Machine HURON MU6 Travel X: 1500 mm Travel Y: 700 mm Travel Z: 600 mm Spindle: SA 40 Spindle speed: from 30 to 2066 RPM Table size: Length 2000 mm x Width 460 mm Spindle motor: 12 CV Scale: 3 axes HEIDENHAIN Centralized lubrication Machine sold as is, some works required: - freewheel of the advances box to be changed - Y-axis locking system needs to be checked - the ram inverter is non-functional - there is a leak on the spindle deflector - there is a missing pin on 1 gearbox lever Voltage: 380 V Length: 2200 mm (without ends table) Depth: 2000 mm Hfedpoz Stlgjfx Ag Sen Total height: 2000 mm Weight: approx 4 T

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 132 h, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 168 kW (228.42 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,140 kg, total length: 5,065 mm, drive type: Diesel, construction width: 2,540 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 100 mm ISO class: Terminal West Mast type: Duplex Transmission: ZF 3WG171 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We will also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCG180-6. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Hjdpfez Ewg Hex Ag Sjfn Side shifter, fork positioner Fork carriage with central leveling; fork positioner opening range: 600 / 2355 mm Rear work light, front work light, heater, full cabin, air conditioning, full free lift, CE certificate, scale, Central lubrication system; 1 rear-view camera on the roof with monitor in the cabin, 1 camera in the mast in combination with the rear-view camera, tire pressure monitoring; engine heater 220 V; Grammer Actimo XL air-suspended driver's seat including seat heating, Forrex fire extinguishing system.