Used Massi Scale 24370 for sale (2,329)

Condition: used, Year of construction: 1973, functionality: not functional, machine/vehicle number: 1709, SIP MUL-1000 universal length measuring machine with a comprehensive set of original SIP accessories. Ledpfx Ajzz Hq Askmsru Manufacturer: SIP – Société Genevoise d’Instruments de Physique, Geneva/Switzerland Year of manufacture: 1973 Machine number: 1709 Measuring range: approx. 1,000 mm The machine is offered expressly in its current condition, without any guarantee regarding functionality or accuracy. Oil was detected in the area of the scale/measuring system. A detailed fault diagnosis or repair has not been performed. Therefore, the machine is not sold as being in working order. Inspection and your own technical assessment on-site in Mönchengladbach are strongly recommended.

Condition: used, Year of construction: 2006, operating hours: 28,491 h, machine/vehicle number: 309, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Fanuc, controller model: 15i, workpiece weight (max.): 5,000 kg, table load: 5,000 kg, overall weight: 28,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 29,840 h, coolant supply: 70 bar, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI 100 A Year of manufacture: 2006 120-tool magazine, BT 50 Knoll high-pressure system, 2000 liters, 70 bar Chip conveyor Pallets, 1000x1000 mm NC table, 0.001° Linear scales in all axes Spindle speed: 6000 rpm Lsdpjz Iyauefx Akmoru Can be inspected while in operation.

Condition: used, Year of construction: 2007, operating hours: 30,271 h, functionality: fully functional, machine/vehicle number: 147, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,950 mm, controller manufacturer: Fanuc, controller model: 15i, total height: 4,500 mm, total length: 5,500 mm, total width: 6,500 mm, table load: 8,000 kg, rotational speed (max.): 4,000 rpm, overall weight: 40,000 kg, spindle speed (max.): 4,000 rpm, operating hours of spindle: 30,251 h, coolant supply: 70 bar, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Good used MITSUI SEIKI HU 150 A for sale - Fanuc 15i control - Knoll high-pressure system, 200 liters, 70 bar - Chip conveyor Ledpfxez Iyd Ts Akmjru - Tool magazine, 120 positions, BT 50 - NC table, 0.001° accuracy - 2 pallets, 1500 x 1500 mm - Extended Z-axis - Machine can be inspected while powered on - Year of manufacture: 2007 - Linear scales in all axes

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 Lrodpfxjz Ipmds Akmsu SPECIAL PRICE!

Condition: new, functionality: fully functional, machine/vehicle number: 13289, table bore: 400 mm, overall weight: 10,000 kg, input frequency: 50 Hz, input current: 72 A, workpiece diameter (max.): 650 mm, spindle speed (max.): 10 rpm, The DC 600 gear shaping machine is the ideal solution for producing large-scale internal and external straight spur gears, thanks to its extended capacity and robust structure. The CNC-controlled automatic cutter positioning feature allows for rapid setup and reduced cycle times by limiting the total cutter stroke to the minimum required. The zero center distance between the workpiece table axis and the cutter spindle axis allows for the processing of a wide range of workpiece diameters, from medium-large to small. It adapts perfectly to both diversified and dedicated production, including robot automation for unmanned operation. Lrsdpfjz Irbdox Akmou

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,325 mm, total length: 3,100 mm, total width: 2,800 mm, overall weight: 5,000 kg, Equipment: cooling unit, GF AgieCharmilles CUT 30P – Wire EDM machine, manufactured in 2011 Wire EDM machine for tool and die making Ljdpjz I Ritofx Akmjru Technical data & features: - Travel ranges X/Y/Z: 600 × 400 × 350 mm - U/V axes: ± 50 mm - Max. workpiece size: 1,050 × 800 × 350 mm - Max. workpiece weight: 1,000 kg - Tapered machining: up to ± 25° at 80 mm height - Wire diameter: 0.15–0.30 mm, wire spool: 25 kg - Automatic wire feeding and re-threading - Glass scales, automatic wire tensioning and collision protection - Surface quality: up to Ra < 0.25 µm - Windows-based control system with 15″ LCD, DXF import and 3D graphics check - Connection power: 9 kVA The machine has already been cleaned, overhauled and tested. You are welcome to inspect the machine on site and test it under power. We can also offer transport, commissioning and training as additional services. Contact us for a customized offer.

Condition: used, Year of construction: 1997, Sled length: 2200 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 2200 mm Cutting depth: 120 mm Scoring saw: no Saw blade height adjustment: manual / crank Saw blade tilt adjustment: manual / crank Lodpfxjz I Iu Ho Akmsru Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Rotational speeds: 1 Motor power: 4 kW Motor brake: yes - automatic Dust extraction port: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 900 kg

Year of construction: 1999, condition: used, Adjustment of the milling stop: via handwheel Milling stop scale display: digital display Ljdpfxjz I Iu Ts Akmjru Adjustment of the milling vice: handwheel Milling vice scale display: digital display Swiveling mechanism: yes

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, including option KIT 50 Includes automatic wire changer AWC Wire EDM machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes glass scales for X and Y axes Ljdpfx Aoz I Nbbjkmoru VISION 5 control 15" LCD color screen, jog shuttle and mouse Includes Conic-Plus option for improved taper Includes Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We would be happy to perform an individual test cut. We also offer on-site commissioning and training for this machine.

Condition: good (used), Year of construction: 2009, CN Heidenhain TNC 530 Lrsdpfx Akez H Ui Ujmsu Travel X – 3000 mm Travel Y – 2000 mm Travel Z – 1200 mm Travel W – 730 mm CNC table 1600 x 1800 mm Max. workpiece weight – 15 t External coolant system, 4 nozzles Heidenhain rotary table with B-axis Heidenhain linear scale, X-axis – 3000 mm Heidenhain linear scale, Y-axis – 2000 mm Heidenhain linear scale, Z-axis – 1200 mm Spindle support 250 mm Safety guard

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 20,809 h, load capacity: 25,000 kg, lifting height: 4,060 mm, fuel type: diesel, mast type: simplex, construction height: 3,800 mm, fork carriage width: 3,050 mm, fork length: 2,340 mm, empty load weight: 34,800 kg, total length: 6,300 mm, drive type: Diesel, construction width: 3,050 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG 250-12LB. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We also gladly offer consignment sales for your vehicle. Side shifter, fork positioner, Lredsz Ev T Eopfx Akmeu Heater, full cabin, scale.

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Lsdez E Rbdspfx Akmeru Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Ljdpfx Akjz Hq Rbsmjru Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Brand new never used. Please check out our other listings as well.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 74 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 2,150 mm, fuel type: diesel, mast type: triplex, construction height: 2,875 mm, power: 41 kW (55.74 HP), fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: super elastic Rear tyre type: super elastic Lrjdpez Hg Ngsfx Akmsu Description: AS NEW CONDITION!!! Side shifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, full cab, full free lift, CE certificate, scale, LED.

Condition: used, mileage: 4,18,656 km, power: 206 kW (280.08 HP), first registration: 12/2015, fuel type: diesel, empty load weight: 6,960 kg, maximum load weight: 5,030 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 8,890 mm, loading space length: 7,034 mm, loading space width: 2,440 mm, loading space height: 2,400 mm, Year of construction: 2015, construction height: 3,640 mm, Equipment: ABS, electronic stability program (ESP), tail-lift, trailer coupling, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 from Deutsche Post. Other services: - Various loading options - Registration service - Delivery possible within Germany for an additional fee Inspection possible without appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Phone: Lrsdpfxsz Rhnms Akmsu E-Mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sale only to businesses (agriculture, freelancers, small and large-scale enterprises) or export. Subject to prior sale and errors. CoC available. The listed equipment was determined using a VIN inquiry; technical errors may occur.

Condition: new, empty load weight: 10,500 kg, maximum load weight: 29,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 pairs of wheel recesses with covers, axle load scales, total loading platform length approx. 10,250 mm, lowbed approx. 7,150 mm long, loading height approx. 890 mm, 24 x lashing points, each 10 tons, 40 x lashing points, each 3 tons, loading ramps (approx. 3,100 x 760 mm), climbing rail on the outside of the ramps and rear slope, loading ramps adjustable laterally, wooden floor 68 mm thick, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load displays, vehicle hot-dip galvanized, surcharge for: hydraulic adjustment of the ramps = price: €1,000, -- subject to printing errors, mistakes and changes, sample images --, more data at: !, More Details: ! Lrsdpfx Akoz Sx Sxjmeu

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Ljdjy Eu Tvepfx Akmjru Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: new, Year of construction: 2025, neu 2025 050068 prompt, Zwischenverkauf v Taiwan 40360 € 770.88 € 1 457 mm 450 mm 457 x 203 mm 450 x 200 mm 215 kg 500 mm 530 mm 5 - 25 m/min 960 mm/min 0,4 - 6 mm 230 mm 0,002 - 0,04 mm/min 2850 1/min 1,5 kW Ljdpfx Akewirh Eemsru 0.75 kW 0.04 kW 0.19 kW 3,7 kW 2200 mm 1575 mm 1950 mm 1320 kg 215 kg 250 kg 203 x 12,7 x 31,75 mm control panel on swiveling arm aut. vertical feed grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment 34 lt with magnetic separator and dust exhaust manual dresser with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to Lrodpswiricofx Akmju - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners OPTION (PRICE ON REQUEST): Diagonal holes

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Complete Slicing & packing line from CFS & Variovac! Lrsdpfexmh Rbsx Akmsu CFS-Uni slicer whit check controller / Scale year of construction 2006 updated firmware whit touch display. Variovac Multipower year of construction 2008 built in vacuum pump + booster pump foil wide 542 mm, Rejection 430 mm, MAP machine, ELS Labeling system! Very nice and well maintained line ready to work!

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Machine type: Bandsaw - Semi-automatic Band dimensions: 3055 x 27 x 0.9 mm Cutting capacity (rectangular): 200 x 350 mm Cutting capacity (round): 260 mm Cutting speed: 18 - 87 m/min Main drive motor power: 1.5 kW Weight: approx. 460 kg Dimensions W x D x H: approx. 1700 x 1200 x 1600 mm Lrsdsx Narljpfx Akmou Standard accessories: - Infinitely variable cutting speed via control panel with display - Raise/lower via control panel (hydraulic) - Manual vice with quick clamping, adjustable in length - Material stop - Emergency stop on control panel - Brush for band cleaning - Coolant tank: 17 litres - User manual in English Options: - 2 pcs. 2-meter standard roller conveyors without measuring scale - 1 pc. saw band 3,055 x 27 x 0.9 mm Available end of April 2026

Condition: used, Applicable material: Concrete POLYGONMACH 120 M3/hour stationary concrete batching plant is one of the high capacity stationary concrete batching plants. These plants are used to produce high quality concrete for large construction projects and infrastructure activities. Lrjdpfx Aksx D A Snemju POLYGONMACH 120 M3/hour fixed concrete batching plant has a capacity of 120 m3/hour and operates fully automatically. Concrete mixing, conveying and unloading processes are fully automatic. In addition, these plants have special designs that facilitate the production of high quality concrete. They give superior results in factors such as concrete strength, quality and homogeneity. These power plants are often used for large-scale construction projects such as large bridges, dams, hydroelectric power stations, highways and shopping malls. Due to their stability, they guarantee on-time delivery and high productivity. POLYGONMACH 120 M3/h stationary concrete batching plants are also known for their environmental friendliness. They have low energy consumption and low emission levels. Therefore, they are the preferred solution in sustainable projects around the world. Thanks to these features, POLYGONMACH 120 M3/hour stationary concrete batching plants are a frequently preferred option in the construction industry. Different types of mixers can be used in POLYGONMACH 120M3 concrete batching plants. 1. Rotary mixer: Rotary mixers work by rotating the drum while mixing the concrete. These mixers are suitable for both small and large-scale jobs and provide high performance. 2. Static mixer: In static mixers, fixed systems are used instead of parts to be held together to mix the concrete. These mixers may cost less but perform less well Mobility: stationary Other characteristics: automatic, special Capacity: 120 m³/h(4,237.76 ft³/h)

Condition: used, Year of construction: 2023, load capacity: 45,000 kg, lifting height: 15,300 mm, total length: 12,020 mm, - Motor Leistung: 235 kW (EU5), 2200 rpm - Kabine: hydraulische Schiebetüre - EGO Joystick - Sitz Isringhausen, luftgepolstert - 3-Punkt-Sicherheitsgurt - Sitzheizung - Sonnenblenden an der Frontscheibe, Dachscheibe, Heckscheibe - Mini-Lenkrad inkl. Schalter für Vor- und Rückwärts - Radio mit CD, MP3, USB, Bluetooth, DAB - Steckdosen: 1 x 12 V, 2 x USB (5V), 2 x 24 V - Schreibtischfunktion mit Leselicht und Ablagefach für A4 Blätter - Notfall Schlüsselschalter - Antrieb: Vorfilter-Lufteinlass inkl. erhöhtem Lufteinlass - Sieb an Tankdeckel - Automatischer Stopp von Motor und Zündung im Leerlauf bei 10 min - Hochdruckfilter - Schmutzfänger vorne und hinten - 4 x LED Arbeitsscheinwerfer am Kotflügel - LED Arbeitsscheinwerfer mittig vom Ausleger - 4 x LED Arbeitsscheinwerfer vorne am Ausleger - 2 x LED Rückfahrscheinwerfer - Licht im Motorraum - elektrisch beheizte und verstellbare Spiegel - Nato Starthilfekabel 24V - Bereifung Hersteller: Continental - Bereifung: V-PLY 18.00 x 33 - Anzahl Reifen: 6-fach Bereifung - abschließbarer Tankdeckel Lredpfeyxhkzox Akmsu - 2 x Staukisten links und rechts im Fußraum - Motorheizung inkl. Kabinenheizung + Verriegelung - Zentralschmiersystem - Display 10 Zoll Monitor in Kabine innen - Rückfahrkamera - 2x Twistlock (Zeitlupe) Kamera - Kamera am Ausleger (außen und innen) - SOLAS Tamtron Scale Power 300i System (mit Bildschirm und Tastatur)

Condition: used, Year of construction: 2005, Working width: 630 mm Planer shaft: strip knives Number of knives: 4 Jointer table length: 2200 mm Jointer fence angle adjustable: yes Folding up jointer tables: manual Maximum thicknessing height: 220 mm Thickness table height adjustment: electric Display of planing thickness: scale Feed speed: 7 / 14 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: segmented Table rollers: yes Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2200 mm Machine width: 1150 mm Lodoyvz Nxspfx Akmjru Weight: 1250 kg

Condition: used, Year of construction: 1996, Sliding carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 145 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Lredjyq Rz Sspfx Akmsu Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: digital readout Crosscut rule display: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 4000 mm Machine width: 2200 mm Weight: 1200 kg