Used Mil-Tek 205 Ts for sale (10,119)

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Pgsdpfsy Hq Rtex Alwst

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) Pgjdpfe E Dqusx Alwet based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Pgedpfx Aoib Dadslwot Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Pjdpfx Aezukp Aelwjgt Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: good (used), Spark trap, spark pre-separator for ventilation ducts, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Pgodpfx Alsz A Thnswst -Spark trap: with copper lamellae -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg

Condition: excellent (used), functionality: fully functional, soft starter Aucom IMS2 IMS520585 V5 C24 F1 E0 motor starter 132-450 kw Digital display, fully automatic setting options. IMS2xxxx-V5 3 x 200 VAC ~ 525 VAC (in-line / 3-wire connection) 3 x 200 VAC ~ 440 VAC (internal delta / 6-wire connection) IMS2xxxx-xx-C24 230 VAC or 400 VAC (+ 10% / - 15%) Control inputs Start (terminals C23, C24) Active 24 VDC, 8 mA approx Mains frequency at start 50 Hz (+/- 2 Hz) or 60 Hz (+/- 2 Hz) during start > 45 Hz (50 Hz), or > 55 Hz (60 Hz supply) during run > 48 Hz (50 Hz), or > 58 Hz (60 Hz supply) Immunity IMS2xxxx-xx-xxx-xx-E0 IP00 (open chassis) echnikai leírás: Aucom IMS2 soft starters are a total motor starting solution, combining high-level functionality with flexibility and ease of use. Whether you need a simple solution to starting or stopping your motor, or a comprehensive protection system for your motor and installation, the Aucom IMS2 can be configured to suit. The Aucom IMS2 offers a choice of soft start and soft stop profiles to ensure optimum control for all load types. The unique torque control system gives more linear acceleration than standard constant current, and a special pump control function reduces water hammer. The Aucom IMS2 also incorporates advanced motor and load protection features, ensuring safer operation for your application. With extensive input/output and integration options, the Aucom IMS2 minimises installation time and costs and ensures that motors can be operated with confidence. In simple installations, set up is very quick as only one parameter needs to be set before the starter is ready to use. For advanced applications, an extensive range of functions allows you to use the Aucom IMS2 to suit nearly all motor starting and control requirements. Aucom IMS2 soft starters can be connected in in-line or inside delta configuration. Inside delta connection allows control of motors 50% larger than the standard rating, and also allows replacement of star/delta starters without changing existing motor wiring. Power connections on 302 ~ 1574 A models can be configured for any combination of top or bottom input and output, making the Aucom IMS2 ideal for integration into existing installations. Pedpfx Alewv Idiowjgt

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Sinker EDM machine GF AgieCharmilles Spirit 4 Year of manufacture: 2008 Travel ranges (X/Y/Z): 700 x 500 x 400 mm Max. workpiece dimensions: 920 x 550 x 370 mm Max. workpiece weight: 2000 kg Distance table - quill: 215 - 615 mm Bath level up to 415 mm Pgodpsz D Apdjfx Alwot Includes pneumatic chuck of the 3R system or Erowa ITS 50 (customer’s choice) Includes 15-position electrode changer in magazine Max. electrode weight: 80 kg Includes C-axis with U = 0-40 rpm Total weight (without dielectric fluid): 4000 kg Dimensions: 3000 x 3000 x 2865 mm After receiving your order, the machine will be cleaned, serviced, and tested by us. We would be pleased to offer you the following additional services and products: - Commissioning - Transportation - Training - Clamping devices - Dielectric fluid - Cooling unit

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 304, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 2,550 mm, total length: 1,900 mm, total width: 1,690 mm, workpiece height (max.): 550 mm, workpiece width (max.): 800 mm, workpiece length (max.): 370 mm, type of input current: three-phase, table width: 400 mm, overall weight: 2,350 kg, table length: 500 mm, empty load weight: 2,350 kg, table load: 500 kg, input voltage: 400 V, tank capacity: 410 l, input frequency: 50 Hz, input current: 10 A, Equipment: compressor, cooling unit, documentation/manual, Very good condition used machine with only 12000 hours working time. Located in Rajkot, Gujarat, India Pedpfx Aloz Dpapowegt

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, total height: 2,372 mm, total width: 1,731 mm, total length: 1,000 mm, table width: 630 mm, quill stroke: 250 mm, table length: 400 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, workpiece height (max.): 265 mm, GF AgieCharmilles FORM 20 Year of manufacture: 2008 Travel distances: X = 350 mm, Y = 250 mm, Z = 250 mm Max. workpiece size: X = 800 mm, Y = 500 mm, Z = 265 mm Pgjdpez D Hb Dsfx Alwot Max. workpiece weight: 200 kg Max. electrode weight: 50 kg Distance table - chuck: 230 - 480 mm APG FORM Generator - working current 72 amps Best achievable surface roughness Ra 0.2 µm Includes pneumatic chuck Erowa ITS 50 Includes 4-position electrode changer in magazine Machine weight (net): 2000 kg Machine dimensions (L x W x H): 1300 x 1850 x 2500 mm The machine has already been cleaned, serviced, and thoroughly tested. We would also be happy to commission the machine for you.

Condition: good (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, table width: 450 mm, overall weight: 2,100 kg, table length: 680 mm, Equipment: documentation/manual, 3-axis erosion machine. Pgedpoz D Na Nofx Alwot

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers Pgjdoxfwdopfx Alwjt + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: refurbished (used), Year of construction: 2014, Vutek GS 5000 R, fully refurbished (always maintained under Vutek’s full-service program) Color: 8C + White Pgsdpfx Aoy U Hmaelwot Resolution: 12 pl / 1000 dpi Speed: up to 275 m²/h Includes: MESH/Textile Kit Trial roll: 1.6 m EFI Fiery server 3-month warranty

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,600 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window Pjdpfx Ajx D Dx Aolwsgt • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 97,916 h, travel distance X-axis: 350 mm, wire diameter (max.): 0.3 mm, overall weight: 2,100 kg, number of axes: 3, wire diameter (min.): 0.15 mm, This 3-axis CHARMILLES Robofil 240 CC was manufactured in 2003. It features a travel range of 350 x 220 x 220 mm and can accommodate workpieces up to 1000 x 550 mm with a maximum weight of 750 kg. The machine has a robust table size of 680 x 450 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES Robofil 240 CC machine we have for sale. Contact us for further details. Pjdpfx Aljzzqx Rjwsgt - X/Y/Z Travel Range: 350 x 220 x 220 mm- Table Dimensions: 680 x 450 mm- Max. Workpiece Dimensions: 1000 x 550 mm- Max. Workpiece Weight: 750 kg- Machine Weight: approx. 2100 kg- Dimensions: 2020 x 2050 x 2000 mm- Electrical Phase: 3 ~ Phases- Frequency: 50 / 60 Hz- Voltage: 400 Volts- Amperage: 18 A- Power Capacity: 12 kVA

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 350 mm, number of axes: 3, This 3-axis CHARMILLES Roboform 35 was manufactured in 2004. It features an X travel of 350 mm, Y travel of 250 mm, and Z travel of 300 mm. The machine has a table size of 500 × 400 mm and can accommodate workpieces weighing up to 500 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 35 machine we have for sale. Contact us for further details. • X travel 350 mm • Y travel 250 mm • Z travel 300 mm • Table size 500 × 400 mm • Work tank approx. 800 × 550 × 370 mm • Max. workpiece approx. 780–940 × 530–590 × 300 mm* Pjdszzxq Uepfx Alwogt • Max. workpiece weight 500 kg • Maximum machining current 64 A on standard 35/35P listings • Machine footprint approx. 1,900 × 1,690 mm • Overall height approx. 2,400 mm • Machine weight approx. 2,500 kg

Year of construction: 2021, condition: good (used), functionality: fully functional, Moisture Analysis Device Computrac® Vapor Pro® XL Autosampler From the dismantling of a battery cell manufacturing line Automated, chemical-free moisture analysis The Vapor Pro XL (VPXL) Autosampler is the further development of the Vapor XL, incorporating the latest moisture-specific analysis technology. The VPXL Autosampler offers an automation function for up to 16 samples with individual test profiles. Measuring range (moisture): 10 ppm (10 µg | 0.001%) - 100% Number of samples: Up to 16 Pedpezx S Etofx Alwjgt Moisture resolution: 1 ppm (0.1 µg | 0.0001%) Weight: 18.6 kg Dimensions: 737 L x 394 W x 208 H mm Results: % moisture, ppm moisture, µg water Data storage: Includes up to 250 test programs, stores the last 1000 test results, and the last 100 test diagrams.

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Pedpfsxqgffox Alwogt

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Pgjdpfx Asziww Nslwst Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 53400 € 1009.26 € Pgodpfxsynm Uie Alwjt 3100 mm 4.5 mm Hydraulisch 135 ° 4500 mm 1750 mm 1950 mm 5500 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7" touchscreen incl. motorized back gauge 800 mm (sample photos)

Condition: used, Transport platform K140 1-82745500 €329 Pedsztw Iijpfx Alwsgt Weight per unit: 21 kg 4 swivel shackles €1,291 1774874610 Weight per unit: 2.35 kg The invoice can be found in the documents!

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm Pgedpfju Idmvox Alwjt table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: good (used), Year of construction: 2016, functionality: fully functional, Includes 1 arm. Pgedpfx Aez Dv Dnjlwst

Condition: used, Tunnissen TS 532 shredder • Throughput 260 mm • Equipped with slow-moving vehicle chassis • Wide tires • Own registration plate • Available as a combination, see reference 12298 Podpfjx I Dvrox Alwsgt Condition: Used

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 2,50,02,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Grinding table 2500 x 930 Pjdpfx Aljz Ecfhowegt Includes existing grinding belts.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. The offer includes: Psdpfx Aljxq Rgyewsgt - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor - Operator cabin for the vertical band saw - Roller and chain conveyors - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners - Sorting line 47-14 by Holzmatic