Used Officine Ave 8 Heads for sale (42,441)

Condition: new, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: central locking, cruise control, fog lights, spoiler, = Additional options and accessories = - CD - Immobiliser - Spoilers - Sun visor - Tachograph = Remarks = Country of origin: SPAIN Displacement: 11,120cc Brakes: Electronic Braking System Emergency Brake Assist Construction: Tractor Head ADblue tank 135L LED daytime running lights Mobile Phone preparation Bluetooth Fifth wheel Electr. And headed rear view mirrors Rear differential lock Electr. Stability Programm ESP Air Suspended front seats Electronic Stability Programm ESP Lane Departure Warning System Model: AS440S46T/P Exterior Color: White Cylinders: 6 Kilometer: 740,000 km less than Interior Color: Med. Grey Max Axle Load: 8,000 / 13,000 kg Tedpey Tymdsfx Amksa

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tanks 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM STD setting C11/C13 Tsdpfx Amsy Tylgokja Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: used, functionality: fully functional, empty load weight: 2,580 kg, Year of construction: 2011, load capacity: 8,000 kg, Heavy-duty trailer Condition: Ready for operation and fully functional Technical condition: Good Description: Tandem trailer – 2-axle trailer MÜLLER MITTELTAL ETS-TA-B 10.7 – payload 8,000 kg – unladen weight 2,580 kg – permissible total weight 10.7 tons – galvanized low-loader with sturdy (mechanical) access ramp, ramp length approx. 2m – lighting system 12V – internal loading area length 5.50 m – internal width 2 m – total length incl. drawbar 7 m – loading height 60 cm – side walls approx. 35 cm high – good tires Tsdezqxh Eepfx Amksa

Condition: excellent (used), Catalogue No. 6747 TECHNICAL DATA - Maximum planing width: 170 mm - Maximum planing height: 130 mm Todpfx Aszcu Rzemksa 7 spindles: 1) Bottom horizontal spindle: 170 mm, 4 kW 2) Right vertical spindle: 130 mm, 5.5 kW 3) Left vertical spindle: 130 mm, 5.5 kW 4) Additional right vertical spindle: 130 mm, 5.5 kW 5) Top horizontal spindle: 170 mm, 4 kW - 5th spindle with electric height adjustment 6) Additional bottom horizontal spindle: 170 mm, 5.5 kW 7) Universal spindle: 170 mm, adjustable up to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top: 6 powered feed rollers (toothed), including 2 double rollers - Top: 4 outfeed rubber rollers - Pneumatically pressed rollers - Side pressure roller included - 2 guide rails in the table - Electrically adjustable planing thickness: 0.37 kW - Infeed table length: 2,480 mm - Stepless feed speed adjustment - Feed motor: 2.2 kW - Extraction port diameters: 1 x 135 mm, 5 x 120 mm - Dimensions (LxWxH): 5,550 x 1,900 x 1,660 mm - Weight: approx. 3,500 kg FEATURES – Made in Germany – Equipped with 7 cutterheads – Universal spindle – Used planer, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1990, LEDINEK BSG 150 head sharpener with knife setting device - in a warehouse - Slovak production TECHNICAL PARAMETERS Todpsihpl Rofx Amkoa engine power 0.55 kW sharpening length 440 mm tool diameter 125 mm - 203 mm manual feed spindle diameter 50 mm knife setting device Machine dimensions: 120/85/165 cm weight 400 kg

Condition: excellent (used), Catalog number 7994 TECHNICAL DATA - max. width of the workpiece 230mm - max. height of the workpiece 130mm 7 spindles: 1) horizontal lower 230mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2 and 3 spindles) 11kW 4) horizontal upper 230mm 5.5kW 5) horizontal upper 230mm 5.5kW 4 and 5 spindles are electrically adjustable up/down 6) horizontal lower 230mm 4kW 7) universal 230mm, adjustable at an angle of 360° 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - 4 infeed rollers from above, geared, pulling - 4 outfeed rollers from above, pulling, rubber, smooth, including 3 double rollers - metal roller from below, pulling - feed on cardan shafts - rollers pneumatically pressed - stepless speed adjustment of the feed rate on an inverter - feed motor 3kW - working pressure 6-10 bar - electric adjustment of the planing thickness - central lubrication of the table - length of the infeed table 1960mm - diameter of the dust extraction nozzles 3x120mm, 4x140mm - dimensions L/W/H 5360x1800x1660mm - weight approx. 4000kg ADVANTAGES – German production, WEINIG brand – with 7 heads – DTR documentation – universal spindle Todpfxsy T Nu De Amksa – used planer, very good condition Net price: 75900 PLN Net price: 18070 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: good (used), Drawer cabinet, Schäfer Shop, 8 drawers – used: Price ex works: €400 (net)! Item 3: Manufacturer: Schäfer Shop Type: unknown Year of manufacture: unknown Todpfx Amszp Rv Ejkea Dimensions: approx. 100x70x100cm 8 drawers of different heights Condition: good Available: immediately Location: Leipzig

Condition: excellent (used), Year of construction: 2021, Almig Belt XP 8 screw compressor Year: 2021 Technical details: Volume flow at 8 bar 1m³/min Rated motor power 7,5 kW Dimensions 800x670x1100mm Weight 275 kg Power on hours: 11867 Load hours: 4755 Remaining time air filter/oil/oil filter change: 1468 hours With Air control B Optional operating modes: Automatic Load / no-load Programmable automatic restart: yes Tsdpszmhgvofx Amksa Local operation – remote On/Off: yes Error memory (no. of items): 20 Control for refrig. dryer: COMBI yes Master function (Baseload changeover mode): no Slave connection to higher order control systems: yes Display: illuminated Under power in our warehouse.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head diameter 315 mm -Cutter head: Widia type WIDAX M45 Ø 315 R 16 -Number of teeth: 16 -Hole: Ø 60 mm -Dimensions: Ø 335 x 78 mm Todpfx Aezqzqcemkea -Weight: 38.5 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face mill Tedpfx Aszqzp Eomkea -Manufacturer: Seco, Secodex Face milling cutter head without indexable inserts -Type: Secodex R257.1- 125 -Hole: Ø 40 mm -Dimensions: Ø 136 x 62 mm -Weight: 3.9 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter Tedpfx Ajzqy Nwemkja -Face milling cutter: cutter head corner cutter -Type: Ø 160 mm -Recording: SK50 -Dimensions: Ø 160 x 250 mm -Weight: 11.2 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm Tedpfxjzqyw Is Amksa -Weight: 8.7 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter Tjdezqywzepfx Amkoa -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm -Weight: 30.9 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter Todpfx Amjzqyr Sjkja -Type: R 265.2-200M -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 205 x 62 mm -Weight: 8.6 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: Ø 167 mm -Hole: Ø 50 mm Tsdpfszqyrxex Amkoa -Dimensions: Ø 167 x 62 mm -Weight: 5.9 kg

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 650 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 18,000 rpm, table load: 4,000 kg, spindle motor power: 30,000 W, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Huron K2X 8 Five gantry milling machine was manufactured in 2006. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 2,300 × 1,500 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality milling capabilities, consider the Huron K2X 8 Five machine we have for sale. Contact us for further details. • Simultaneous 5-axis machining • Rotary axis (B): ±110° • Rotary table axis (C): 360° continuous • Table size: 2,300 × 1,500 mm • Spindle taper: HSK-A63 • Through-spindle coolant Tjdpszd Epiefx Amkoa Additional equipment • Chip conveyor • Portable MPG handwheel

Condition: good (used), Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head Tsdjxdwx Aepfx Amksa -Manufacturer: Schmid, plan and boring head -Type: S.AdK 6 -Recording: SK50 -Adjustment accuracy: 0.01 mm -Dimensions: 175/150/H305 mm -Weight: 24 kg

Condition: used, Year of construction: 2014, Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Todpfx Amszqtduskja Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS

Condition: excellent (used), Turning diameter max. 20 mm Turning lenght max. 320 mm Spindle bore 24 mm Spindle speeds 200-10'000 rpm Turret with 10 pos., all of them are driven Tjdpommdacefx Amksa Barloader LNS Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2021, Min. 8 bays of flow rack shelving for boxes and crates, feed rack, SSI-Schäfer – used: Price per bay, ex works: €450.00 (net), incl. dismantling, packaged and loaded! Manufacturer: SSI-Schäfer Type: KDR / box flow rack Year of manufacture: 2021 Support type: P63 Bay width: 2.63m Max. bay load: 2000kg Lower clear shelf height: 2,200mm DLR depth: 1.90m: shelf load 200kg 2.15m: shelf load 200kg Condition: good Available: immediately (still needs to be dismantled) Tsdpjzpf Hrefx Amkoa Location: Erfurt area

Condition: used, TORNOS Micro 8 is a CNC automatic lathe engineered for high-precision machining with strong accuracy and reliability. Working capacities: 5 axes, workpiece length max 20 mm, max bar diameter 10 mm; collet tapers W15 (spindle) and F13 (back spindle). Key specs: stepless spindle 0–12000 t/min; rapid traverse X 20 m/min, Y 40 m/min, Z 20 m/min; spindle/back-spindle motors 2.2/3.7 kW; 3x400 V 50 Hz; total power 8 kVA; weight ~1600 kg; dimensions 1670×870×1650 mm. Equipment: LNS TRYTON 112 bar feeder, lamp, coolant system, oil mist extractor, RS232 interface, status light. Delivers tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Todpjzqbl Tjfx Amkja

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, 8 sets -Jaw width: 18 mm Tedpfezpwuhjx Amkja -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 60/72/H47 mm -Total weight: 1.4 kg/set

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Tsdpfxsyf Dp Es Amkea Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesInfeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still and sparkling applications. The inclusion of a Win & Tech microfiltration unit enhances p... Todpfx Amozd Ucxokea

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm Tsdpfx Aozpbrqjmksa - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition