Used Omega Q250 for sale (148)

Condition: new, Year of construction: 2026, Mantle and bowl liner set for Metso HP200 STD Fgsdpez Dulwofx Ap Deh This listing is for a complete set of wear cones for the Metso HP200 STD cone crusher. The set consists of: Bowl liner (outer cone) — part number N55208134-22, weight 550 kg. Mantle (inner cone) — part number N55308011-22, weight 482 kg. Material composition: 22% manganese, 2% chromium, balance iron. The components are manufactured from castings of the highest quality available on the market. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, Jaw plate set for Metso LT95 / C95 — large tooth, new type This listing is for a complete set of jaw plates for the Metso LT95 / C95 jaw crusher. The jaw plates feature a large-tooth profile and are manufactured in the new design. The set consists of: Fixed jaw plate — weight 868 kg. Swing jaw plate — weight 710 kg. Material composition: 18% manganese, 2% chromium, balance iron. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others. Fgjdpsz Durkofx Ap Doh

Condition: used, -Dimensions: 1420x2600x2200mm -Stone size: 801x1630mm -Model: Omega5.163 -5 decks -Serial number: 8118337 -Year: 2003 -Baking surface: 6.6m² -Temperature: 300°C -Voltage: 400V -Power: 30kW -Weight: 1800kg -Refurbished equipment: The equipment is prepared upon order; lead times for collection and return are agreed upon at the time of ordering (please request the price after revision) -Front with brushed stainless steel hood -Solid refractory cement baking stones, 20mm thick -Stainless steel armoured electric heating elements -1 independent pressure relief valve per deck -1 independent steam generator per deck -Treated glazing to reduce heat loss -Steam unit and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels Fedpfx Apsy H Ebmj Degh -Wiring looms made of high-temperature silicone cables

Condition: ready for operation (used), functionality: fully functional, empty load weight: 5,500 kg, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, suspension: air, tire size: 445.45 r 19.5, color: dark red, Year of construction: 2017, Equipment: ABS, sem berger french curtainsider mega volume, lightened chassis, tare 53q.li, 3 disc axles, french curtainsider with lift and lower at adjustable heights from 2.90m to 3.05m in running order, rear doors, sliding roof cover, trailerable plywood floor, collar hooks on the floor, year 2017, closed pallet rack for 24 units, vehicle coming from abroad already nationalized for Italian registration - INTERDRIVE SRL DEALER - PARMA Fgjdpswg E Tvofx Ap Doh

Condition: good (used), functionality: fully functional, empty load weight: 10,300 kg, maximum load weight: 28,700 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 07/2013, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 2,980 mm, suspension: air, tire size: 435.50 r 19.5, color: red, Year of construction: 2013, Equipment: ABS, Luek semi-trailer, 4-axle flatbed with frame, 4 axles with 3rd and 4th steering and 1st liftable, air suspension, ebs, removable and storeable rear ramps under the 2.50m long flatbed, mega frame with predisposition for lift and lower and sliding cover and uncover, flatbed with coil hole, and lateral and central rulasi uprights, fifth wheel height hooks from 96cm to 1.05m, internal height 2.98m, year 2013, 15 pairs of rud hooks on the 8 ton flatbed, inspected until 05/31/2025 - INTERDRIVE SRL DEALER - PARMA Fsdpovcdi Aefx Ap Dsgh

Condition: used, mileage: 7,98,478 km, power: 368 kW (500.34 HP), first registration: 07/2018, fuel type: diesel, number of seats: 81, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, navigation system, onboard kitchen, trailer coupling, = Other Options and Accessories = - DVD - Air conditioning - Front refrigerator - Sleeper cab - Toilet - USB connections - Webasto heater = Further Information = Height: 400 cm Damages: none = Company Information = Fgjdpfx Ajyrnp Nop Doh We are an international company based in Belgium, located near Brussels (approximately 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and in every price range in stock. We can help you find the right tourist, school, or city bus tailored to your needs or budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Bus inspection visiting hours: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Year of construction: 2026, Equipment: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container ----Technical Specifications * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles * Tyres: 235/75 R17.5, twin tyres * Air suspension: fitted * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ----Chassis / Superstructure * Platform trailer with twistlocks for containers * Multiple container locking systems (fixed + extendable) * 6 pairs of lashing points integrated into the outer frame * Additional lashing points under crossmembers * Robust outer frame with lashing holes * 27 mm anti-slip birch plywood floor * Galvanised omega-profile crossmembers * Max. crossmember spacing: 400 mm ----Brakes / Safety * EBS braking system (Knorr or Wabco) * ABS / Roll Stability Program * Dual-circuit air brake system * Basic tyre pressure monitoring system * 2 air tanks (each approx. 80 L) ----Equipment * Complete LED lighting system * Lateral LED marker lights (flashing) * 15-pin electrics * Rear underrun protection * Side underrun protection * Plastic mudguards (180°) * Mud flaps with “WIESE” logo * Rear access ladder (foldable & extendable) * Rear impact buffers ----Towing Equipment * 18 t drawbar (fixed & extendable) * 40 mm towing eye * Turntable with ball bearing slewing ring * Height adjustment available ----Miscellaneous * TÜV approval available Fsdpfey Euffex Ap Dogh * Fully hot-dip galvanised chassis * High-quality steel construction * Made in Germany For further information, please do not hesitate to contact us.

Condition: used, mileage: 6,78,444 km, power: 368 kW (500.34 HP), first registration: 07/2018, fuel type: diesel, number of seats: 74, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, navigation system, onboard kitchen, trailer coupling, = Other Options and Accessories = - DVD - Air conditioning - Front refrigerator - Sleeper cab - Toilet - USB connections - Webasto heater = Further Information = Fsdpfxew Dn Ike Ap Dogh Height: 400 cm Damages: none = Company Information = We are an international company based in Belgium, located near Brussels (approximately 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and in every price range in stock. We can help you find the right tourist, school, or city bus tailored to your needs or budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Bus inspection visiting hours: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 61800 € 1168.02 € 2550 mm 2.5 mm 1.5 mm 3.5 mm Motorisch 3830 mm 2200 mm 1900 mm 4050 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length Fsdpfxowiq A Uj Ap Degh - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 59900 € 1132.11 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm Fgjdpfxjwiq E No Ap Dsh 3800 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: Fgjdpfjyz E T Sox Ap Doh * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 71500 € 1351.35 € 4200 mm 1.5 mm 1 mm 2 mm Motorisch 5450 mm 2200 mm 1900 mm 5350 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Fgedjwirrqepfx Ap Doh Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 63600 € 1202.04 € 3200 mm 2 mm 1.2 mm 3 mm Motorisch 4450 mm 2200 mm 1900 mm 4500 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Fgedpfx Apswiq A Ij Dsh Conical back stop Back stop extension Vacuum holder

Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Fgjdpfx Aezhd Ncjp Doh Excerpt from the equipment. Complete equipment available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, according to EC Side impact protection: * According to EC, made of aluminum profiles, anodized Kingpin supports: * 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side Axles: * 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5" * Total stroke approx. 180 mm, raising and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching lashing straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Lighting: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights * Lane-keeping lights LED * 1x15- and 2x7-pole connector sockets on the front cross member Equipment: * Warning signs ECE 70 * Holder for rotating beacon, including rotating beacon * Foldable and extendable access ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: RAL 5010 azure blue * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 5010 azure blue * Crossbars: RAL 5010 azure blue * Kingpin supports: Aluminum, anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of crossbar pockets in the outer frame, evenly distributed * 4 rows of crossbar pockets transverse to the loading area * 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in crossbars * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars * Side board magazine under the chassis left and right * Sliding rails for side boards * Container locks for 1 x 40" and 2 x 20" containers, flush at the rear * Containe

Condition: used, -Dimensions (LxWxH): 1420x2200x2200 mm -Serial number: 8801680 -Reference number: 7367165 -Baking surface: 5.3 m² -Stone slab dimensions: 801x1230 mm Fgjdpfx Aoy Icknep Djh -Year: 2005 -Number of decks: 5 -Maximum temperature: 300°C -Voltage: 400V -Heating power: 53.6 kW -Weight: 1064 kg -Refurbished equipment: Equipment is prepared upon order; lead and turnaround times are specified at that moment (please request pricing after refurbishment) -Front panel with brushed stainless steel extraction hood -Heavy refractory cement baking soles, 20 mm thick -Stainless steel armoured electric heating elements -1 independent pressure relief damper per deck -1 independent steam generator per deck -Glazing treated to reduce heat loss -Steam system and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels -Electrical bundles with high-temperature silicone cables

Condition: new, maximum load weight: 26,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,450 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, WIESE 3-Axle Low Loader with Ramps and Wheel Wells – NEW Availability: approx. 4 months from order Fedpfx Ajyuq Igjp Degh --- Vehicle Data Manufacturer: WIESE * Type: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross vehicle weight: 39,000 kg * Fifth wheel load: 12,000 kg * Axle unit load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brakes: WABCO EBS with RSS --- Dimensions * Load platform length: 13,450 mm * Low bed length: approx. 9,550 mm * Fifth wheel section: approx. 3,640 mm * Overall width: 2,550 mm * Low bed loading height: approx. 920 mm * Fifth wheel height: approx. 1,250 mm --- Features * 3 SAF axles (9 t) with air suspension * 1st axle lift axle * 3rd axle trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS brake system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin + 2x 7-pin power sockets --- Structure * Robust steel frame * 28 mm hardwood floor / Omega deck * 13 pairs of lashing rings (8,000 kg) * Additional lashing points (5,000 daN) * 2 pairs of wheel wells * Excavator arm recess * Removable aluminium side boards on the gooseneck * Front toolbox --- Ramps * 2 x aluminium access ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting mechanism * Laterally adjustable --- Miscellaneous * Warning boards for oversize up to 3 m * Conspicuity marking according to ECE-R48 * Technical documentation and TÜV certificate For further information, please do not hesitate to contact us.

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black Fjdpew U H Sbefx Ap Dsgh * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Year of construction: 2026, condition: new, Complete and turnkey roll forming line for highway guardrail and road safety barrier production with multiple profile options. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This guardrail roll forming line is designed for the production of highway safety barriers and road protection systems with high precision and efficiency. The system provides a complete turnkey solution from coil feeding to finished product stacking. The line is engineered for continuous production, ensuring stable operation, consistent product quality and long-term reliability in demanding industrial environments. PRODUCTION CAPABILITY Fgodsyzfi Tjpfx Ap Doh The system can produce various guardrail and support profiles: 2-Wave (W Beam) Guardrail 3-Wave Guardrail C Post Profile Sigma Profile Omega Profile Ray A & Ray B Profiles LINE CONFIGURATION The production line consists of: Hydraulic Decoiler (10 Ton capacity) Straightening Servo Feeder Hydraulic Press Stamping Die & Punching System Roll Forming Machine Flying Shear Cutting System Conveyor System Automatic Stacking System ENGINEERING FEATURES High precision roll forming system Servo-controlled feeding for accurate punching and forming Heavy-duty machine structure for continuous operation Modular and customizable line configuration Advanced automation system (PLC & HMI controlled) OPERATIONAL ADVANTAGES Turnkey production solution High production efficiency Consistent product quality Flexible profile production capability Short lead time compared to European manufacturers OPTIONAL CONFIGURATIONS Different profile designs and tooling options Automation and control system upgrades Integration with coil processing lines Custom engineering solutions APPLICATION AREAS Highway safety systems Road infrastructure projects Construction and public works Industrial barrier systems THE LINES THAT WE ARE EXPERIENCED: Guard Rail Production Lines C, U, Z, And Solar Panel Profile Production Line Logistic Warehouse Traverse Production Line Cable Tray Production Line Market Shelving Production Line Suspended Metal Ceiling Production Line Solar Framing And Racking Production Line Lighting Fixture Body And Lid Production Line Panel Radiator Top And Side Cover Production Line Metal Grid And Planks Production Line Metal Door And Door Frame Production Line PVC Window Gypsum Board Profile Production Line Agriculture And Animal Husbandry Practices Agricultural Vehicle Applications Painting Plant Panel Production Line Automotive Industry Applications Coil Punching Application Household Appliances Industry Applications

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/68 mm and 24/68 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Fgjdpfx Aolbimaep Djh Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,480 mm, loading space height: 3,040 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis Steel welded construction with narrow crossmember spacing and reinforced design, low-loader outer frame profile, for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2550 mm, kingpin plate with replaceable 2 kingpins. Rear slope of approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/diamond plate, in the low-bed, omega rail laterally at the bottom on the outer frame as a mounting rail for tarpaulin and spacers for lashing points, not in the wheel area. If a lift table is used, there is an additional, lightweight outer frame with an omega profile. 24-ton, 2-speed landing gear, single-sided operation, with a semi-circular lower part and a straight connection plate, with stroke compensation, free swivel radius to the rear approx.: 1950 mm, rear support, foldable 2 wheel chocks + holder Side underrun protection, aluminum Quarter panel fenders in front of and behind each axle with anti-splash flaps behind each axle Underrun protection, steel Splash flap at the rear over the entire width 4 storage boxes, stainless steel, w=800/h=350/d=350 mm, with a polished, lockable door, 2 x on the left front and 2 x on the right front in front of the 1st axle Lift table behind the gooseneck, approx. 3000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right front + additional activation with a wireless remote control, lift table can be raised with the tarpaulin closed! Tarpaulin attachment in the lift table area to an additional, lightweight outer frame with omega profile, lift table can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame 2 pairs of lashing points at the top and on the side embedded in the outer frame 8 pairs of lashing points at the top and on the side embedded in the outer frame, each 10 tons 9 pairs of 5-ton lashing points embedded in the outer frame Axles + Suspension SAF drum brake axles Fedpfoi Riw Aex Ap Dogh last axle with trailing steering knuckle, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lifting and lowering valve + auto-reset function H&S function with quick vent 1st axle, automatic lift axle, incl. forced lowering and starting assist, activated by pressing the brake pedal 3 times (starting assist is functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Axle lift below the recommended ride height, no guarantee for tire damage Wheels and tires 235/75R17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring brake parking brake 2 foolproof coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load recognition in the truck via EBS, without installation in the truck. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines Fodpfx Apolbilve Djgh • maximum free space for material bending thanks to the F-geometry for the bending beam • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/100 mm and 24/100 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: used, This listing is for a Promega Maxwell 16 MX3030 Magnetic Particle Processor Automated DNA Extraction from up to 50mg Tissue Purifies up to 16 samples at a time Integrated grinding replaces Proteinase K treatment and manual grinding Purified DNA is ready for downstream amplifications Fgjdpfxsxzhmro Ap Deh

Condition: used, This listing is for Maxwell 16 Promega Magnetic Particle Processor MX3031 The unit is in full working condition and ready for immediate use Automated magnetic particle processor designed for efficient, hands-free extraction of nucleic acids and proteins. Processes up to 16 samples simultaneously using pre-filled reagent cartridges to ensure consistent yields and high-purity results for downstream laboratory applications. [[1]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Fodpfx Apozgf Sps Djgh Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory