Motorized Bending Machine CNC

Schechtl MAX 310 CNC

Condition: new, Year of construction: 2025, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • maximum free space for material bending thanks to the F-geometry for the bending beam • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/100 mm and 24/100 mm • operating pedal Itjdpfxolbilve Adwob • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. Isdsvxipgopfx Adwetb X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Iedpfjvtpciex Adwjtb Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. Iodpfx Adoqt Dmyewetb When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW Iedpfecxxx Hjx Adwjtb weight of the machine ca.:3,5 t

Condition: new, Year of construction: 2025, CIDAN Machinery manufactures coil handling slit and cut-to-length lines that can be programmed and operated by skilled and non-skilled users alike. Our cut-to-length machines are all-in-one units built to withstand high-level production over the course of time while taking up as little space as possible. CIDAN Machinery provides many of their cutting-edge features as standard – straightening units, sheet guide for in-feeds, guillotine shears with hold down beam and double-edged blades, feeding units, foot pedals for remote feeding, and many more. In order to provide the absolute best technological options from around the globe, CIDAN Machinery has partnered Forstner Machinery, a world-wide leader in slit and cut-to-length machines Since 1960, Forstner has been developing and manufacturing machines for professional coil processing. Our partnership has provided us the opportunity to bring all of their best machines to you! - Sheet metal on coils saves money, reduces waste and frees up storage space. - We have the right solution for all levels of production. - Free up floor space with coil processing and increase your productivity and your profits. - The extensive range of Forstner products can be combined to make an efficient production facility based on your requirements, where parameters such as power, distance, time and access to material are decisive for fast and cost-effective production. - With our solutions you can easily process coils from 500 kilos up to 8 tons. Bigger coils mean fewer changeovers, less waste and a more efficient process. - How many different materials do you need readily accessible? Frequent changeovers? With a coil selector you keep eight different materials ready at the cut-to-length for far quicker changeovers. Itedpjmfrgrsfx Adwsb - With a well equipped cut-to-length in your production facility you will no longer need to cut strips in guillotine shears. - Do you sell sheets or do you want to recoil material in smaller coils? We have the right solution for you! - Rational coil handling cuts your lead times, frees up production space and reduces tied up capital in stocks.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Itodpetwliwsfx Adwob Sale only to commercial customers and with exclusion of any warranty!

Condition: new, Year of construction: 2023, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-70 WORKING LENGTH 700 MM Itedpfx Adoiwdk Tjwsb ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -1.0 MM DEVICE WEIGHT 70 KG.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 9207102, Offer 12001 Technical data: - material thickness 1,25 mm Iodpfsi Hpmtox Adwjtb - max. throat 180 mm - roller center distance 63 mm - max. material thickness at 40 kg/mm² strength 1,25 mm - working speed approx. 6 + 12 m/min - drive 400 V / 0,7 / 0,85 kW - space requirement approx. W 550 x H 1250 x D 1000 mm - weight approx. 120 kg - with: - E - foot switch

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Itedpfscudl Nox Adwob Technical specifications: - Max. Working width; 1250 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 265 kg