Used Overbeck Tailor-Made Solutions For Your Intralogi for sale (23,801)

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! Rcodpfx Asuxmt Tofhsd The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used accessory, the ‘Ricoh RB5020 ring binder’. Item for sale: 1 x Ricoh RB5020 suitable for the following models: Ricoh Pro C7200 series Ricoh Pro 8200 series Ricoh Pro C9200 series Please check in advance whether this accessory is suitable for your machine. Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test binding can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Rcedpfxsxzqhfs Afhsd Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), functionality: fully functional, Vertical bag packing, filling and sealing machine Brand Jasa Packaging Solutions B.V. Model PMT Horizontal seal length 270 mm Rcodpfxev Utd He Afhsd Material width 620 mm Overall dimensions: 2800 mm x 1450 mm x 2350 mm.

Condition: excellent (used), Year of construction: 2022, Detailed specs in the pictures and below. Description: 1.Equipped with full color touch screen monitor, main machine, transfer and conveyor can control the speed automatically and synchronization trace parameter setting system. 2. The machine adopt movable and adjustable operating function in each section .Equipped with elaborate tooth lever design. It is simple, convenient and efficient for one man operation. 3. High power stepless speed control frequency conversion and high-efficiency power motor, the highest speed can reach 400 meters/min, power transmission adopts powerful belt transmission, with low noise, high efficiency, easy maintenance and economic efficiency. Redpfsnlag Iex Afhecd 4. Each functional components of the machine adopt modular design, which is convenient to assemble, convenient to replace and debug products, convenient for beginners to master technology, and easy to learn. 5. Unique design of the upper and lower glue tank and coordinate with the need of products. 6. Compression and conveyor section equipped with adjustable the pressure design according to the needs of the products. Equipped with a set of special soft belts to ensure uniform pressure and perfect quality. 7. The machine adopt photoelectric counting, which can be used for total or quantitative counting, and equipped with kicker mark recognition device.

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Rcsdpfoicic Hox Afhod Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Year of construction: 1952, 220 mm Rcsdeyn R Nwspfx Afhjd ja weight of the machine ca. 1,4 t

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, Integrated Pick-and-Place System for Industrial Assembly Applications The DS Place was developed to reduce the high integration effort typically associated with conventional pick-and-place solutions. In many projects, the robot, feeding system, vision system and control unit are sourced separately and then integrated via multiple interfaces. This often results in increased coordination effort and extended commissioning times. The DS Place is designed as a fully coordinated, integrated system. Rcodpfxsw Rm Hwe Afhed System components: SCARA robot Camera-based part detection (vision system) Automatic feeding via material hopper and pick belt Integrated PLC control system Functionality: Parts are automatically fed from the material hopper onto the pick belt, detected by the camera system, and then precisely transferred by the robot onto a discharge conveyor or into a downstream process. Technical features: Throughput: up to approx. 1,200 parts per hour Suitable for metal, rubber, wood and plastic parts Maximum part length: approx. 30–35 mm Gentle handling Interfaces: TCP/IP, optional PN/PN coupler, 24 V I/O Commissioning: position the system, teach the drop-off location, start operation Typical applications: Automatic assembly Sorting and transferring of small parts Integration into existing production lines Manufacturer: DS auto-solutions Year of manufacture: 2025 Condition: New

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars 🔹 cables Rcjdpfxetvdcyo Afhsd The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Rcsdpfx Asuq Sb Sofhsd

Condition: good (used), 3 pieces used flanges Rjdpfx Afjy Avd Rshocd from OVERBECK Cylindrical grinding machine

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox full bleed trimming’ finishing system. Item for sale: 1 x Xerox complete finishing system for brochure production with the following equipment: Includes A-FN13 booklet finisher Includes CZ module A-FN08 Includes 2-page trimming A-GW07 Includes Plockmatic Pro35 WITHOUT IDM You will receive a complete finishing system for complete brochure production. Plug and play connection to various Xerox machines. Xerox Versant 3100 Xerox Verdant 4100 Xerox Versant 180 Xerox Versant 280 and more... Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). Redpfjxnxy Nsx Afhocd The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Year of construction: 1989, centre height 250 mm centre distance 600 mm Dimensions (L/W/H) 3600 x 1900 x 2100 mm Rodpfexzuzcox Afhecd weight of the machine ca. 2,25 t

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Redeydqlqspfx Afhecd Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: excellent (used), Year of construction: 2003, A Weland Compact Lift 2440 is now available for sale. The machine has been kept in a clean, well-maintained environment and receives annual servicing, making it reliable for many years to come. It has completed approximately 50,000 cycles so far. Typical usage is around 10,000 to 20,000 cycles per year, so this machine has seen light use. The lift is 6,000 mm high, but the height can be adjusted as needed. It is a Vertical Lift Module (VLM) that works well in warehouses with changing storage demands and can be shortened if required. The VLM is equipped with 25 trays, making it ideal for storing taller items. Additional trays are available from Relevator if needed. Rcsdpfx Asxpuyuefhod Manufacturer: Weland Solutions Year of Manufacture: 2003 Model: Weland Compact Lift 2440 Height: 6,000 mm (adjustable) Width: 2,950 mm (lift) / 2,440 mm (tray) Depth: 2,950 mm (lift) / 820 mm (tray) Number of Trays: Approx. 25 per lift Maximum Load per Tray: 400 kg Electrical: 400V, 25A

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. Rcedpfxjwy Uu Ao Afhjd • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled.

Condition: good (used), Year of construction: 2005, functionality: fully functional, conveyor belt length: 4,500 mm, conveyor belt width: 400 mm, conveyor belt speed: 300 mm/s, total length: 4,500 mm, total width: 620 mm, total height: 350 mm, overall weight: 110 kg, discharge height: 350 mm, power: 0.37 kW (0.50 HP), input frequency: 50 Hz, Equipment: type plate available, Manufacturer: Overbeck Year of manufacture: 2005 Overall dimensions (LxWxH) in mm: 4,500 x 620 x 350 Width including side frame in mm: 510 Width including drive unit in mm: 620 Side rail height in mm: 140 Conveyor length in mm: 4,500 Conveyor width in mm: 450 Belt type: PVC, longitudinal groove Belt width in mm: 400 Substructure: None Running surface: Steel Drive: Head drive Motor type: Geared motor Motor data: 0.37 kW, 50 Hz Rcsdpfxsyzrncj Afhjd Motor position: Right Conveyor speed in m/s: 0.3 Net weight in kg: 110 Condition: Used / fully functional Functional test: OK

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current Redsx I Akuepfx Afhocd EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: like new (used), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle speed (max.): 6,000 rpm, travel distance Z-axis: 330 mm, spindle motor power: 15,000 W, rotational speed (max.): 6,000 rpm, overall weight: 3,200 kg, swing diameter over bed slide: 600 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, We are offering this as-new DN Solutions Lynx 2100 CNC lathe Lynx 2100 GT2100 GT2600, year of manufacture 2026. Listing Title: DN Solutions (Doosan) Lynx 2100 – As-new condition (only 50 operating hours!) Description: We are offering a DN Solutions (Doosan) Lynx 2100 CNC lathe in as-new condition. The machine was purchased for a specific project and has seen minimal use. It is currently in showroom-like condition with less than 50 operating hours. Condition: As-new, no signs of wear, fully functional Availability: Immediately available Key advantage: Avoid long delivery times and secure a machine in new-machine quality right away. Technical Data: Control: Fanuc i-Series Swing diameter over bed: 600 mm Maximum turning diameter: 350 mm Maximum turning length: 330 mm Bar capacity: 51 mm / 65 mm Spindle speed: 6,000 rpm Number of tool stations: 12 Main drive power: 15 kW Machine weight: approx. 3,200 kg Rodpoyzbdgefx Afhocd If you have any questions or need further information, feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 120 mm, total length: 220 mm, total height: 245 mm, usable tank capacity: 3,300 l, Safe compliant with Valrem. Fire resistance > 120 minutes Rjdpsykapfsfx Afhocd External dimensions: Length: 220 cm Width: 120 cm Height: 245 cm Internal dimensions: Length: 170 cm Width: 95 cm Height: 210 cm

Condition: used, Year of construction: 2019, Manufacturer : Novexx Solutions Model TE 204 Year : 2019 Type : Tamper-evident labeller Type of products handled : Carton   Labelling head : ALS204 Dispensing speed : max. 40 m/min Label width: 10 -110 mm Label length: 5 to 600 mm   Rsdpfx Afsygndiohocd Supply voltage: 220V Motor power: 2.5 kW Technical documentation Dimensions : 2363 x 1455 x 1420 mm  

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Rcsdpfx Ajyit Ulsfhed

Condition: used, functionality: fully functional, total width: 635 mm, total height: 145 mm, total length: 2,080 mm, Item number: 1000003710 Manufacturer: OVERBECK Year of manufacture: unknown Overall dimensions: 2,080 x 635 x 145 mm (LxWxH) Side width: 635 mm Side height: 135 mm Conveyor length: approx. 1,800 mm Conveyor width: 550 mm Curve (degrees): 90° Curve radius, inside: 900 mm Curve radius, outside: 1,535 mm Roller type: steel / plastic coating / conical Rollers per axle: 1 piece Roller length: 550 mm Roller pitch, inside: 75 mm Roller pitch, outside: 130 mm Roller diameter: outside: 85, inside: 50 mm Drive type: Gravity Rsdpfoqur Tysx Afhjcd Condition: Used / fully functional Function test: OK

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers, enabling color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS1812 C M Y K LC LM + White + Varnish, or with double CMYK + WWWW (White) + VVVV (Varnish) Rcjdpfxega U Tdo Afhsd Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Dimensions: approx. 260cm (L) x 160cm (W) Weight: 750kg Printing area: 1800x1200 mm, with a printing height of 150mm.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS-UV4060 Max Print head: Epson TX800 Maximum resolution: 2690 dpi Includes software for printer control and image editing Weight: 90 kg Control display Rsdpfxefbmgfs Afhecd Table movement via screw mechanism 360-degree operation available upon request: for bottles and round objects A2 size (45x65 cm) and a printing height of 20 cm are possible Software settings and printer instructions are available upon request. Available throughout Germany/Europe.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers – it can also print in color on glass, wood, textiles, plastic, metal, and many other materials. New model: PS1612 C M Y K LC LM + White + Varnish or with double CMYK + WWWW (White) + VVVV (Varnish) Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Dimensions: approx. 240cm (L) x 160cm (W) Weight: 650kg Rcsdpfxjga U Tae Afhjd Print area: 1600x1200 mm with a print height of 150 mm.