Used Parmigiani Profile Bending Machine for sale (67,130)

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Iisdpfx Aewbvmief Teb Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen Iedpfx Afjhmmfkj Tsib - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Iodopu R Nvspfx Af Teib Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1102, I will sell a TENON spacer frame bender. It has a Polish menu, the bender is in very good condition, in constant use. It has a Polish menu. Ijdpfxewp Szle Af Teib

Condition: used, workpiece height 20-90 mm device 1: Schleifaggragat device 2: Fräsaggregat device 3: Profilschleifaggregat Automatic edge processing machine Rehnen type KBA for the automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise sanding, deburring and rounding of workpiece edges and enables a consistently high surface quality. Ideal for joineries, furniture making and industrial woodworking. Includes replacement sanding belts and cutters. Iiedpfx Aoyb Sdcjf Tjb Unit 1: Sanding unit, oscillating Unit 2: Milling unit, top and bottom Unit 3: Profile sanding unit Accessories: For edges R5

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 28450 € 543.4 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Iisdpoyb Szhofx Af Teb Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 Iodpfx Afjv Tpxqo Teib -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear Iiedeyv N E Ujpfx Af Tob driven. (Top and bottom rollers) - Calibration

Condition: new, working length 2050 mm 2.0 mm max. wire thickness 3.0 mm Underfloor 110 mm motor strength 165 mm motor strength 22 kW bending speed 5.2 mm/min length 3150 mm height 1150 mm width 850 mm Accessories / equipment: Iisdpfxsyv N Dwj Af Tob - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm tube diameter max. 70x2 (d1600) mm tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel Ijdpfx Afeyv Nwqj Toib - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, sheet width 2100 mm plate thickness 40 mm pre-bending 30 mm upper roll diameter 390 mm lower roll diameter 360 mm side roll diameter 300 mm total power requirement 22 kW machine weight ab. 17200 kg Overall size 5060 x 2200 x 2180 mm Iiodpfxoyv Nt Ee Af Tob

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg Iisdpfx Ajyv Nnisf Tjb dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm I-beam section - upend 50 x 15 mm roll diameter 157 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication Iijdpfx Afjyv Nk Re Tjb - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers Ijdpfx Aeyv Nh Nof Toib - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm Isdpfsyv Nhcox Af Teib plate thickness 10 mm pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm total power requirement 11 kW weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm side roll diameter 120 mm total power requirement 2,2 kW Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel Iedpfxeyv Nf Uo Af Tsib - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 6 mm pre-bending 5 mm upper roll diameter 200 mm min. bending diameter Ø 300 mm bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm Iisdpsyv Nf Iofx Af Tob

Condition: new, sheet width 1050 mm plate thickness 3,3 mm pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Isdpfx Afeyv Nfbo Toib Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1050 mm Iedpfx Afoyv I U Is Tjib plate thickness 1,8 mm pre-bending 1,5 upper roll diameter 70 mm min. dia. 105 mm total power requirement 1,1 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1700x700x1100 mm

Condition: new, sheet width 2100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm lower roll diameter 210 mm side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers Ijdpsyv I Ubsfx Af Toib - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Iijdpfx Afeyv I Smj Tjb Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 1050 mm plate thickness 1 mm roll diameter 56 mm dimensions of the machine ca. 1600 x 700 x 1050 mm Iisdpjyvvn Aofx Af Tob Domestic equipments: - Upper roller can be swung out manually

Condition: used, dimensions Auf Anfrage weight Auf Anfrage Available Auf Anfrage Various used spare parts or complete units, control systems and control cabinets for Weinig Univar (and others) always available. Iijdpfx Afeyz Dfme Tob Please contact us. Sample pictures.

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit Iisdpfx Afobahd Es Tsb cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Year of construction: 2024, condition: new, MRB-S Series Technical data (see pictures) Standard equipment CE Conical bend Motorized back roller Additional control panel for upper and lower rollers which are operated with landing gear. SAE 1050 steel rollers Induction hardened rollers, Relaxed steel construction, at 2.5 and 3m Machine supports, brake system for precise bends, Digital display. Motorized back roller with puller Optional equipment Motorised under-roller mounting, ground rollers Extended rolls for profile bends, Special rollers for profile bending, Special packaging for international deliveries. MRB series: Technical data (see pictures) Standard equipment CE standard Digital display Conical bend Motorized back roller with tightening Additional control panel for upper and lower rollers, which are operated with landing gear. operated by landing gear. SAE 1050 steel rollers, Induction hardened rollers, Relaxed steel construction, Braking system for precise bends. Optional equipment Motorized bottom roller with suit, stone rollers Iiodpjfin E Defx Af Tob Extended rolls for profile bends, special rollers for profile bending, Special packaging for international Programmes Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines all over the world and is headquartered in Türk