Three rolls bending machine 2000 x 13

FACCIN 3HEP 2021

Condition: used, Technical details: lifting capacity in kg: 6600 kg fork length: 1.500 mm Lifting height: max. 3.700 mm track width: vorn: 1.800 mm track width: hinten: 1.400 mm Iiedou Nwl Uspfx Acfef axle distance: 2.200 mm voltage: 15 V / Hz Number of working hours: 416,0 (Stand: 28.07.2025) noch in Betrieb h weight approx.: 9.500 kg dimensions L x W x H: 5,2 x 2,0 x 2,8 m - Mast = Duplex design - Fork carriage width max. 1800mm - Load center of gravity: at 600mm = 6,600kg; at 700mm = 6,105kg and at 800mm = 5,685kg - with coupling (pin Ø 40mm) *

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp Iiedpfxjyhc T Is Acfef (14) units available.

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: Ijdpfexabkbex Acfsif * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Isdpfsgyzzujx Acfoif Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, overall weight: 5,770 kg, total length: 15,050 mm, load capacity: 12,500 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: double-girder – Capacity: 12,500 kg – Lifting height: 6 m – Year of manufacture: 2018 – Hoist type: steel wire rope – FEM/ISO hoist: 1Am / M4 Dimensions – Span: 15,050 mm centre-to-centre – Installation height: 970 mm – Width of wheel set incl. buffers: 3,370 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Total weight: 5,770 kg (of which trolley 846 kg) Speeds – Hoisting: 5/0.8 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Specifications – Control: Abus radio control, including spare transmitter – Crane manual available: yes – Dismantled: yes, available immediately – Hour meter: 306 hours (as of 26/6/2025) – Last service: 26 June 2025 Iodpfx Acjy T Hfgjfsif – Condition: in very good condition, well maintained

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Iisdpfx Acet Akt Refjf Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Iisdsw Emf Djpfx Acfef Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll Iijdjr H Df Iopfx Acfsf - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Iiedpfx Aed Id Ugscfof Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Base frame

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: Motorized adjustment of the lower rolls Hardened rolls Motorized adjustment of the rear rolls Digital display Sheet metal width 2070 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for initial bending 6.0 mm Roll length 2070 mm Smallest diameter 285 mm Roll diameter 190 mm Weight 3480 kg Dimensions L-W-H 3750 x 920 x 1260 mm Motor 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Conical bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Isdpfx Aceg Nz T Isfjif