Used Schwarzmuller Semi Low Loader for sale (19,090)

Condition: used, empty load weight: 9,000 kg, maximum load weight: 25,500 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 01/1977, loading space length: 8,250 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 12,500 mm, total width: 2,500 mm, total height: 1,750 mm, suspension: steel, tire size: 8.25 R 15/18 PR, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, leaf spring suspension, forced steering, loading ramps can be attached. Laedpfji Rqwfsx Alyeh Superstructure: Saddle height approx. 1,250 mm, both axles with forced steering, gooseneck 4,100 mm, turning radius from corner/diagonal to kingpin center 1,800 mm, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: Laodoizu Ntspfx Alyeh S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Burgers Double Deck Trailer | 2-Axle Steered NEW More volume. Lower costs. More sustainable transport. Up to 60% more loading space compared to standard trailers. In many cases, replaces 3 trailers with 2 double deckers, reducing CO₂ emissions by up to 40%. Technical Data (Model: 2-axle steered) Chassis and Running Gear Design: 2-axle, steered * Axle system: TRIDEC TF-V02, mechanical steering without electronics * Air suspension with low-maintenance bushings, lift range +160 mm / -105 mm * Axle spacing: 1,400 mm * Axle load: 2 × 9,000 kg = 18,000 kg * Permissible gross weight: 30,000 kg (12,000 kg kingpin load + 18,000 kg axle load) * Tyres: 4 × Goodyear 385/65 R22.5 on steel rims * Wheelbase and axle position adjustable according to loading scheme * Wheel housings with wear blocks and anti-spray mudflaps * Fully hot-dip galvanized chassis to ZINQ standard Brake and Safety Systems WABCO 2-line air brake system * Drum brakes 420 × 180 mm * ABS/EBS-E with ECAS (level control), ELEX, and RSS (electronic stability control) * Visible indicator lights for ABS/EBS and ECAS Dimensions External dimensions (L × W × H): 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: Length 13,590 mm × Width 2,500 mm × Height 1,820 mm * Lower deck internal dimensions: Length 9,940 mm × Width 2,500 mm × Height 1,820 mm * Lower deck height from ground: 320 mm Bodywork and Materials Side walls: 21 mm plywood, coated inside and out with white polyester * Front wall: 24 mm plywood, both sides polyester white * Roof: 30 mm insulated polyester panel, white, with rainwater drainage * Floors: Aluminium profiles (top and bottom), non-slip, grey coated * Stainless steel front and corner profiles, L-profiles on side flaps Access and Operation Three side flaps (battery compartment, lift/smartboard control, technical access) * Multi-deck lift Dhollandia DH-VH (2,500 kg lifting capacity, hydraulic folding tip, LED platform lighting, foldable handrails and ramps) * Lift control: external operation on the right, integrated into the fence * Spare wheel not included Electrics and Lighting LED interior lighting upper and lower deck * Complete LED exterior lighting: position, marker, reverse, and work lights * Additional LED for platform lighting Laedpfxsw I Iinj Alysh * Power supply via 2 × 230 Ah batteries, charging via tractor unit * Main switch behind side flap, coupled with lift control * WABCO Smartboard: weight display, odometer, adjustable loading/unloading heights Finish and Paintwork External colour: RAL 1003 yellow (non-metallic) including wheel wells, stainless steel front and rear * Reflectors: 3M partial contour marking (white sides, red rear) * Advertising space possible (optional) Benefits 60% more loading space – replaces up to 3 standard trailers with 2 double decks * 40% lower CO₂ emissions – eco-friendly and economical * ROI often within just 1 year * Customisable (axles, cooling, dimensions) * Suitable for long-haul and distribution transport Available Configurations at Burgers: 2-axle standard – rigid or steered, 13.60 × 2.55 × 4.00 m * 3-axle standard – rigid or with steered axle * City trailer – max. 11.50 m, always steered * Special dimensions – height up to 4.25 m depending on national regulations * Body: plywood or insulated, optionally with cooling and temperature zones * Extras: tail lift, hydraulic ramp, solar modules, cameras, aerodynamic profiles, LED packages For further information, we are happy to assist you.

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners Laedpfx Ajyhi H Ielyjh * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT23201013029, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space width: 2,540 mm, total length: 14,500 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: red, Year of construction: 2026, - Please note: archive photos! - Type SZS 300 spezial for truck transport #Chassis (low-loader semi-trailer) - Welded steel chassis, fifth-wheel coupling plate with replaceable 2" kingpin - Low-bed section from wheel area to gooseneck, inclined to approx. 210 mm loading height; rear sloped to wheel area - Hook-in rail for aluminium ramps at the rear, over the entire width - Wheel cover in galvanised sheet steel, removable - 1 towing eye at the rear, 10 t - Spare wheel with bracket on front bulkhead/external front tool box - 1 steel tool box on gooseneck, front transverse, approx. L=2400 mm, W=400 mm, H=600 mm, lockable - Electric cable winch, 24 V, pulling force 8165 kg, mounted front on gooseneck behind tool box on load bed, radio remote-controlled, cable length 35 m x approx. 10 mm, with roller cable guide window and 2 removable guide rollers on gooseneck and rear slope, incl. NATO socket on connection plate - 1 pair of wheel wells approx. 700 mm from gooseneck, recessed into floor, open to the outside. Note: main frame protrudes approx. 145 mm - 4 pairs of plug-in positions for wheel stops (Fliegl standard), without wheel stops - Spacer block for parking the semi-trailer, approx. 100 mm high and approx. 100 mm long - 2 plug-in wheel stops - Preparation for spacer inserts in the wheel well #Lashing points (low-loader) - 2 pairs of 2.5 t lashing eyes on the gooseneck - 7 pairs of lashing mushrooms, recessed top and side in the outer frame, 10 t each - 4 pairs of 10 t lashing eyes recessed in the top of the main frame side members - 1 screw-type lashing eye, 6.7 t each (JDT), rear centre in the ramp storage compartment - 1 additional folding lashing eye at the front in the low-bed, 10 t each #Axle & suspension - SAF drum brake axle - Air suspension with lift and lower valve #Wheels and tyres - 235/75 R 17.5" - Steel wheels, twin-mounted, factory silver #Braking system Laodpfx Alozy Hwyjyjh - 2-line air braking system - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, without connecting lines - EBS (electronic braking system) with EBS socket at the front, without connecting cable - Note: this trailer may only be towed by vehicles ensuring ABS effectiveness! #Electrics - 24 V multi-chamber LED lights with resistor, yellow LED side marker lights, LED number plate light - 2 white/red LED outline marker lights at the rear - 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front, without connecting cable - 2 white LED front position lights - 1 LED beacon with bracket - 1 additional LED work light, at the rear - 2 additional LED work lights, integrated in the gooseneck to illuminate the load bed #Floor - Gooseneck with steel chequer plate covering - Low-loader deck in perforated steel sheet; chequer plate covering in the wheel well area, removable sheet covering in the wheel arch area - Rear slope with perforated steel sheet #Side boards - Aluminium, 320 mm high, on the sides of the gooseneck, plug-in, approx. 2500 mm long - Rear board, aluminium, 320 mm high, on the gooseneck, plug-in #Loading ramps - 1 pair of aluminium loading ramps, max. load capacity 12,000 kg per pair, length approx. 3400 mm and width approx. 320 mm, storage compartment between rear main frame side members #Registration / plates - Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear - With DEKRA inspection and report - Warning board to ECE-70

Condition: used, empty load weight: 10,860 kg, maximum load weight: 37,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Rubber surface, two-part ramp with grating, ramps spanning the entire width, electro-hydraulic pump for ramps or connection to the truck's hydraulic system. -- Subject to printing errors, errors and changes. Sample images. -- More details can be found at: !, More Details: ! Laedpfsz Syfysx Alyeh

Condition: new, axle configuration: 3 axles, Year of construction: 2026, We have all Europe documents!      We can delivery the trailers with FOB-EXW-CPT-CFR-CIF      Lasdpeqx Nfgofx Alyjh If you have an interest please contact with us 

Condition: used, overall weight: 6,200 kg, first registration: 01/2005, Year of construction: 2005, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body Lsdsi Rqirjpfx Alysah Body: Aluminum wheel well, floor length 1,800 mm per well, load capacity 6,200 kg, package price. ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, overall weight: 6,200 kg, first registration: 01/2005, Year of construction: 2005, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body. Body: Aluminum wheel well, floor length 1,350 mm per well, load capacity 6,200 kg. Package price. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Lodpfsi Rqinjx Alyjah

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high Ljdpfxjxarmao Alyjah * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: used, maximum speed: 100 km/h, Equalising block for low-bed semi-trailer Dimensions – see photos ##### Lsdpsz Sx A Refx Alysah PLEASE CALL – NO EMAILS! #####

Condition: used, maximum load weight: 6,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2013, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 13,650 mm, total width: 2,550 mm, Equipment: ABS, German vehicle Trailing lift axle (lockable) BPW axles, Air suspension, Raise/lower function, Various lashing points, Loading area length: rear 9.15 m front 4.15 m Loading height: rear 0.85 m front 1.03 m 4 units available !!!!!Sale does not include ramps!!!!! If interested, please call Christian Bredemeier. Ledjz Shr Aopfx Alyoah

Condition: new, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, crane, Step-frame semi-trailer in roll-off tipper design 3 axles with disc brakes SAF axles Lift axle Tires 385/55 R 22.5 Gear-driven winch LED lighting Work lights 25-ton capacity in sliding/articulated design for container lengths up to 7,500 mm Roller height approx. 1,300 mm Hydraulic internal locking Soft stop Quick release Fifth wheel as loading platform with side boards 1 unit available in stock. Different equipment/design available on request. Further information available on request. Laodpfx Ajzirgxslyjh

Condition: new, Year of construction: 2026, GVN Trailer 4 Axle Exclusive Lowbed        Please get contact with us for more informaiton;     Lajdpfx Ajqxbfmjlyoh

Condition: new, Year of construction: 2026, GVN Trailer 4 Axle Extendable Lowbed          Please get contact with us for more informaiton  Lodpsqxq Aiefx Alysah     

Condition: used, maximum load weight: 78,380 kg, overall weight: 97,000 kg, axle configuration: > 3 axles, first registration: 06/2023, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt of the equipment, complete equipment list available upon request. Equipment: * 2-inch kingpin * 12 t Broshuis SL axles * Extendable width extensions * 4 pairs of lashing points on the central beam, 10,000 daN * 1 pair in the fixed section in front of the telescoping section * 3 pairs behind the telescoping section * 9 pairs of lashing points in the outer frame, 10,000 daN * Holes in the outer frame for attaching lashing straps * Jost 2-speed geared support winch * 4 extendable, illuminated width extension panels * 3 plug-in side panels on the gooseneck (length approx. 2,400 mm) * Rear corner posts, plug-in/removable * 4 sets of shims with holders under the loading platform at the support legs * 1 pair of lashing points in the outer frame of the gooseneck, 10,000 daN * 3 pairs of lashing points in the outer frame of the gooseneck, 5,000 daN * NATO socket - NATO spiral cable - 2 x 7-pole electrical system * 1 x 7-pole EBS - 1 socket at the front and rear for auxiliary steering * 1 storage box on the gooseneck, spanning the entire width, with angled corners (45°) * Opening from above - doors in the corners can be locked (not continuous to the storage box in the middle) * 6 sets of plug-in uprights, approx. 1,200 mm high, incl. holder on the gooseneck Ledpfx Alez Ifk Esyoah * WADER container pockets for 1 x 20 ft and 1 x 40 ft - Brake connections, red/yellow - EBS WABCO * Rear support, telescoping * 2 LED reversing lights at the rear * LED lighting (DK round) * 1 LED rotating beacon * 8 pairs of upright pockets in the outer frame of the loading platform * 3 pairs of upright pockets in the outer frame of the gooseneck * Contour marking, yellow on the sides / red at the rear * Adjustable attachment rails for loading ramps * 3 LED flashing beacons at the rear of the vehicle * RAL 3002 carmine red * 2 ECE plates at the rear

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires Lasdpfjg Sk T Dex Alyoh 235/75 R 17.5 Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Condition: new, maximum load weight: 90,700 kg, overall weight: 1,26,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm Ledow Tgp Depfx Alyoah * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: new, maximum load weight: 40,320 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Below is an excerpt of the features. Complete equipment list available upon request. GOOSENECK Gooseneck with a rear slope of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. - 2-inch kingpin - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5 kg). LOADING AREA 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying at the front in the loading area (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. - On the gooseneck and at the rear, left and right, one holder each for the warning signs, including a socket. - A galvanized steel front wall. - 3 height-adjustable wooden planks. - Galvanized folding supports under the slope of the loading area. - A holder for a rotating beacon at the rear of the semi-trailer. - Height-adjustable tarpaulin superstructure, approximately 3,960 mm. - Galvanized front wall with a tensioning mechanism for the sliding curtains. - Height-adjustable by approximately 400 mm. - Roof from the EDSCHA brand, which can be moved forward on aluminum roof rail profiles. - 3 pairs of sliding rails in the loading area. - The superstructure can be hydraulically widened at the rear to the left and right by approximately 750 mm (for loading and unloading). - Sliding cover with a pivoting portal beam. - Sliding tarpaulin with approximately 700 mm of reserve in length, with tension straps at intervals of approximately 600 mm. - Height of the top edge of the superstructure approximately 3,960 mm (loaded). - Driving with the sliding cover open is not permitted and will damage the tarpaulin. - Attachment rail for aluminum ramps at the rear of the vehicle. - Control valves for the hydraulic widening of the superstructure, mounted on the right side of the semi-trailer. (± 4 kg) - White reflector tape according to EU regulations, red on the sides and rear. - Electro-hydraulic unit at the rear under the loading area. (± 45 kg) - Holder for a pair of warning signs on the front wall. - Four warning signs, approximately 400 mm extendable, approximately 423 x 423 mm, with an LED position light (± 25 kg). - On the warning signs, a holder for a rotating beacon. - 7 pairs of rail pockets for plug-in rails, approximately 100 x 50 mm, in the outer frame of the loading area (± 21 kg) - Lift axle on the front axle, controlled by TEBS-E depending on the current axle load and loading condition (± 69 kg). Laodpfxsz N Nx Rs Alyjh - 6 pairs of recessed lashing rings along the central beam (LC 5,000 daN). - 1 pair of recessed lashing rings along the central beam at the rear (LC 10,000 daN). (± 27 kg) - A painted layer of sand on the diamond plate on the gooseneck and in the loading area as anti-slip protection. - 1 LED reversing light, each on the left and right, in front of the first axle. - 2 LED work lights mounted on the rear panel. - An acoustic warning signal when reversing. ACCESSORIES - Cable for supplying the electro-hydraulic unit and/or the electric winch (approximately 35 mm², approximately 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with a plug connection (NATO-NATO). FIFTH WHEEL BRACKETS JOST fifth wheel brackets, mechanical, with a 2-spee

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice Lodpszz Ei Rjfx Alyjah HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Ledpfxez S Ikko Alyeah

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. Laedpfx Aljrgzv Njyeh GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, empty load weight: 18,240 kg, maximum load weight: 45,760 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 02/2012, loading space length: 12,120 mm, loading space width: 2,740 mm, loading space height: 550 mm, tire size: 285/70R19.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, forced steering, lifting + lowering, ABS (anti-lock braking system), lashing rings. Body: Low-bed trailer with 3 hydraulically steered axles and jeep dolly. Including a jeep dolly with a 10t SAF axle and 295/80R22.5 tires! Ledpjyf E E Usfx Alyoah At the rear: 3 x 12t SAF axles! Extendable to 3.2m width, 8m low bed platform! With radio and cable remote control, automatic self-alignment. A detailed technical description is available and can be sent by request! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, maximum load weight: 27,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2013, next inspection (TÜV): 08/2026, loading space length: 11,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, * Gooseneck with storage boxes Lajdpfxsz A N Anj Alyoh * Trailing axles * Hydraulic loading ramps * Low-bed, extendable ----* Tire dimension: 235/75R17.5 * Technical total weight: 42,000 kg * Tare weight: 8,700 kg * Overall length: 13,150 mm * Next inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. ----?YOUR VTS TEAM

Condition: new, overall weight: 31,000 kg, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,300 mm, Year of construction: 2026, Equipment: ABS, 2-axle inclined semi-trailer in special design with loading ramp for machine and forklift transport. Mega design with a coupling height of approx. 960 mm. Tapered construction for maximum internal height. Dimensions: Length: 13,600 mm Width: 2,480 mm Height, tapered from rear to front: approx. 3,300 mm to 2,800 mm Wheel recesses including fill-in pieces VSE Smart Steering axle (steers forwards and backwards) Aluminum floor for extreme wheel loads, including anti-slip coating Alcoa DB alloy wheels on the outside Lasdex Hb Rdepfx Alyeh Curtainsider body with lifting roof RSAB IceProtect Rear extendable Oversize warning plates Rear ramp in extendable version for minimum approach angle, including angle reduction Electro-hydraulic drive Comprehensive load securing equipment Upon request, we also supply the appropriate 3-axle tractor unit for purchase or rent. Further information available on request.