Used Sleeve Packer for sale (1,121)

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm Guodpfoff Huwex Akaeg • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: good (used), Year of construction: 1993, COSMEC SM 400 multi-saw - after the technical review Gujdpegyz Rvofx Akaog - very good condition - Italian production - year of production 1993 TECHNICAL PARAMETERS: cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg

Condition: new, Year of construction: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/Normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Overhang: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Gjdjfmh Tlspfx Akasug Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without extra charge Extra charge for R3: € 1,700,- Accessories: Coolant system (€ 620,-) - Separate container - Filling volume: max. 15 l - Delivery rate max. 13.4 l/min Accessories: Drilling package 5 (€ 875,-) - Vise [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door incl. packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2025, functionality: fully functional, The granular mixer is available in 6 versions: The version can be made of stainless steel or coated steel: Technical specifications: MV 2 The MV 2 is designed for the complete mixing of the entire plastic granulate, due to the forced guidance provided by the screw sleeve. Container capacity: 120 kg / 200 L L x W x H: 700 mm x 700 mm x Height: 1050 mm / 1250 mm Guodpfsd R Atrox Akasg - Screw, removable - Control for mixing times - Extraction device - 1 drain - Mobile base frame, running rollers 100 mm, all with parking brake.

Condition: new, Year of construction: 2026, Threading unit OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum threading capacity - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Overhang (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Speed display, digital Drilling depth display, digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions with control panel (mm) 670 x 1,100 x 2,200 mm Motor, three-phase, 400V with frequency converter (kW) 4.0 Spindle speeds, infinitely variable R1 (1-stage) 0-1000 1/min R2 (1-stage) 0-1600 1/min Gujdjd Su Agepfx Akaog Manual feed Weight (kg) 400 Optional drilling package 6 (€ 910.00 plus VAT) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) Delivery in Germany, free of charge, including packaging! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: excellent (used), Multisaw scm m3 - track width 300 mm - cutting height 120 mm - engine power 37 kW - weight 1800 kg - year 2003 - max. element width 100 cm - min. element length 40 cm - smooth adjustment of feed speed - three rows of anti-kickback pawls - spindle diameter 50 mm - sleeve diameter 70 mm Godpfx Aei Ewnaekaoug - sleeve equipped with spacers and 5 saw blades 350 mm - blade diameter from 200 to 350 mm - automatic central lubrication - four upper pressure rollers – a set of keys Machine and tape in very nice condition.

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment Gedpfoqup Ansx Akasug - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: new, Year of construction: 2026, CORMAK ZS-40HS Pillar Drill The CORMAK ZS-40HS is an advanced pillar drilling machine for metalworking, designed for intensive industrial use. Featuring a hardened gear transmission system, large drilling capacity, and tapping capability up to M32, this model is a reliable solution for manufacturing plants, metalworking shops, and maintenance departments. Key Advantages Large drilling capacity – up to 40 mm – suitable for machining a wide range of materials and thicknesses. Tapping function with automatic spindle reversal – enables fast and efficient thread cutting up to M32. Precision oil-bath gearbox – 6 spindle speeds provide optimal speed adjustment (95–1600 rpm) for various machining operations. Rotating head with height adjustment – increases flexibility and allows drilling at different angles. Rigid 115 mm diameter column – ensures excellent stability even under maximum load. Large worktable with height adjustment and vise mounting capability – facilitates machining of large workpieces. Construction and Technology The CORMAK ZS-40HS industrial drill press is built with heavy-duty cast iron components and a reinforced 115 mm diameter column, ensuring maximum rigidity and vibration reduction. The transmission system is based on hardened, precision-ground gears, providing exceptional durability and reliable power transmission. The 120 mm spindle travel and MT4 spindle taper allow the use of a wide range of drill bits and tapping tools. Precision and Performance The CORMAK ZS-40HS metalworking pillar drill offers high drilling accuracy and repeatability thanks to its mechanical gearbox and precision handwheel with depth scale. Flexible adjustment of both the drilling head and worktable height allows the machine setup to be tailored to specific machining requirements. The powerful motor (1.1 kW continuous duty S1, 1.6 kW intermittent duty S6) ensures efficient operation even when drilling large diameters. Applications The CORMAK ZS-40HS column drilling machine is designed for industrial applications, particularly in: Manufacturing and processing plants Metalworking workshops Maintenance departments Tool rooms Technical schools and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Guedpsriduxefx Akajg Spindle travel 120 mm Column diameter 115 mm Spindle speed range 95–1600 rpm Number of speeds 6 Worktable dimensions 575 × 354 mm Base dimensions 385 × 330 mm Motor power S1: 1.1 kW / S6: 1.6 kW Power supply 400 V / 50 Hz Overall height 2100 mm Weight 350 kg

Condition: new, Year of construction: 2026, CORMAK ZS-40B Industrial Pillar Drill Gujdpjridv Sofx Akaeg The CORMAK ZS-40B is a technologically advanced industrial pillar drilling machine designed for intensive metalworking applications in workshops and production facilities. Equipped with a precision oil-bath gearbox, automatic vertical feed, and tapping functionality, the CORMAK ZS-40B metal drill press delivers reliability, efficiency, and outstanding drilling and threading performance. Key Advantages Automatic vertical feed – three feed rates (0.12, 0.18, and 0.25 mm/rev) allow optimal adjustment of cutting parameters to suit different materials. Tapping function with automatic spindle reversal – enables efficient internal thread cutting up to M32 without operator intervention. Oil-bath gearbox with hardened and ground gears – ensures smooth, quiet operation and long service life of the drive system. Rigid 115 mm diameter column – minimizes deflection and vibration, resulting in higher machining accuracy. Large rotating worktable with height adjustment – allows machining of large and irregularly shaped workpieces. Integrated cooling system as standard – improves drilling quality, extends tool life, and reduces the risk of overheating. Construction and Technology The CORMAK ZS-40B industrial drill press is engineered for continuous operation in demanding production environments. At its core is a mechanically driven gearbox lubricated in an oil bath, providing stable and reliable power transmission. The MT4 spindle taper accommodates a wide range of drilling and tapping tools, while the high rigidity of the spindle head and column assembly ensures precise hole machining. A transparent plexiglass chuck guard enhances operator safety while maintaining full visibility of the machining area. Precision and Productivity The automatic feed system enables repetitive drilling operations without operator fatigue, significantly improving productivity in serial production. The spindle speed range from 95 to 1600 rpm, combined with six gearbox speeds, allows precise adjustment of machining parameters to match the material and tooling requirements. A precision handwheel with depth scale provides accurate control over drilling depth. Applications The CORMAK ZS-40B drill press with tapping function is an ideal solution for: Manufacturing and assembly plants Mechanical and metalworking workshops Maintenance departments Tool rooms and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Cooling system with pump Plexiglass spindle guard Handwheel with graduated scale Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Column diameter 115 mm Distance from spindle axis to column 260 mm Maximum spindle-to-table distance 754 mm Maximum spindle-to-base distance 1270 mm Spindle speed range 95–1600 rpm Number of speeds 6 Automatic feed rates 0.12 / 0.18 / 0.25 mm/rev Worktable dimensions 354 × 575 mm Overall height 2120 mm Motor power 1.1 kW (S1) / 1.6 kW (S6) Power supply 400 V / 50 Hz Weight 410 kg

Condition: new, Year of construction: 2026, CORMAK Z5050 Floor Drill Press – Heavy-Duty Industrial Metal Drilling Machine The CORMAK Z5050 floor drill press is a robust and precise industrial metal drilling machine designed for professional applications requiring high performance, accuracy, and reliability. Thanks to its wide speed range, tapping capability, and four-stage automatic spindle feed, the machine is ideal for drilling large-diameter holes in structural materials. Its solid construction and optimized ergonomics make the CORMAK Z5050 an excellent investment for long-term productivity and safe operation. Main Advantages of the Machine High machining capacity – maximum drilling diameter of 50 mm and tapping capacity up to M22 in steel provide a wide range of applications. Drilling machine with tapping function – right/left spindle rotation and four spindle feed rates (0.1–0.4 mm/rev) ensure precise and stable thread machining. Automatic spindle feed – enables efficient drilling operations without continuous manual operator intervention. Very wide speed range – 18 spindle speeds from 55 to 1450 rpm allow precise adjustment of parameters according to the processed material. Rotary worktable – ±45° tilting range and a large 580 × 580 mm surface allow angled drilling without removing the workpiece. Cooling system and work light – provide comfort, accuracy, and reliable operation even during extended machining processes. Design and Technology The CORMAK Z5050 column drill press has been designed for maximum stability and high torque performance. The spindle is mounted in a Morse taper MK5 and features a large 210 mm quill travel, enabling deep drilling and tapping operations. The 190 mm diameter column and rigid cast iron base effectively reduce vibrations and ensure precise machining. A clear control layout, readable feed indicator, and intuitive speed adjustment system make machine operation quick, safe, and convenient. Gederidynopfx Akaeug Precision and Working Efficiency Thanks to its optimized gear transmission system and powerful 2.2 / 3 kW motor (960 / 1440 rpm), the CORMAK Z5050 metal drilling machine provides efficient torque transfer to the spindle, allowing drilling in demanding and high-strength steel grades. The integrated cooling system with a dedicated 75 W pump helps maintain high surface quality, reduces tool wear, and extends the service life of cutting tools. Standard Equipment Drill chuck 1–13 mm Morse reduction sleeves – 3 pcs. (for MK5) Cooling system with pump Work light Technical Specifications Parameter Value Maximum drilling diameter 50 mm Tapping capacity (steel / cast iron) M22 / M24 Spindle taper MK5 Spindle travel 210 mm Number of speeds 18 Spindle speed range 55–1450 rpm Number of spindle feed stages 4 Feed rates 0.1 / 0.2 / 0.3 / 0.4 mm/rev Column diameter 190 mm Spindle-to-column distance 370 mm Spindle-to-table distance 80–800 mm Spindle-to-base distance 1325 mm Table tilt angle ±45° Worktable dimensions 580 × 580 mm Base dimensions 860 × 580 mm T-slot width 2 × 18 mm Main motor power 2.2 / 3 kW Motor speed 960 / 1440 rpm Coolant pump power 75 W Overall dimensions 1050 × 590 × 2150 mm Net / gross weight 760 / 860 kg

Condition: used, Year of construction: 2007, Overview  The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Guedpety Ddxefx Akajg Technical Details  - Capacity: 8,000 cartons/ h - Formats: - 0,5l - 0,75l - 1,0l - Operating hours: 32,500 Scope of Delivery  - Aseptic Carton Filler | Elopak | S-PS80HA | 2008 - 3x Cap Applicator | Elopak | PLA-S30 | 2009 - Tray Packer | OYSTAR A+F | Traypacker TF | 2011

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual Gjdpoud H H Ujfx Akasug

Condition: new, Year of construction: 2026, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter Gjdpfx Aoud Iztokaoug 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 400V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Gsdpfstuyq Rjx Akaeug

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Guodpfx Asft Ti Tjkasg Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. The advantages of CMSP/CMSPF barfeeders at a glance: - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Cut-to-length and separating machine Manufacturer: Pfister AG Type: DUOSCHLIFF 2200 Gjdpfszxrwpex Akasug Year of manufacture: 1995 Max. workpiece length: 500 mm For the production of: - Cylindrical ejector pins with a stepped design - Flat ejectors - Profile and hole punches - Ejector sleeves

Condition: used, ESTEVE double interior silo unit 2 independent storage cells Capacity 2 x 1,500 kg, totaling 3,000 kg Dry bulk product, likely flour Dimensions: 5300 x 2580 x 2630 mm Electrical supply: 380 V Common support frame for both silos Two metal silo bodies 1 - Filling: connection and piping Ø 80 mm Cell feeding via filling circuit 2 - Storage: 2 cells of 1,500 kg Separation of 2 batches or compatible products Graduated level indicators on both cells Front inspection ports 3 - Discharging: hoppers at the bottom Product directed towards the extraction system 4 - Extraction: mechanical system with rollers Product extraction at the outlet of the cells 5 - Screening: integrated sifter Sifter motor 0.75 kW according to installation sheet 6 - Transfer: pneumatic system RBL 10 Transfer motor 3 kW according to installation sheet Piping circuit of approximately 25 m Distribution piping included 7 - Filtration: textile filter sleeves Motors installed at the bottom Integrated storage, extraction, screening, and transfer Brand: ESTEVE, now integrated into Shick Esteve The ESTEVE JE 2500 double interior silo unit is a professional, used equipment designed for storing dry bulk ingredients. It includes two independent 1,500 kg cells each, for a total capacity of 3,000 kg. The identified use is likely related to flour or compatible powdered dry products. The unit combines storage, mechanical extraction, screening, filtration, and pneumatic transfer in a single installation powered by 380 V. Why this model stands out The JE 2500 is not limited to storage; it brings together several functions necessary for handling a bulk ingredient. Its two cells allow for the separation of two batches or two compatible products, while extraction via rollers ensures the mechanical removal of the product. The integrated sifter and RBL 10 pneumatic transfer system complete the installation for organizing its flow. This configuration is particularly advantageous when a project requires a professional interior flour silo with several pieces of equipment already grouped on the same frame. Key advantages Two independent 1,500 kg cells Total storage capacity of 3,000 kg Mechanical extraction via rollers Pneumatic transfer system type RBL 10 Gedpfx Ajzx Thcokaoug Sifter integrated into the unit Filtration with textile sleeves Filling via Ø 80 mm connection Front inspection ports Graduated level indicators on both cells Unit installed on a common support frame

Condition: ready for operation (used), Year of construction: 2000, operating hours: 50,796 h, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 840 mm, controller manufacturer: HEIDENHAIN, controller model: MANUAL PLUS M, number of axes: 2, Horizontal turning machine manufactured in . This KERN Status features a maximum turning length of 1,000 mm and a turning diameter over bed of 400 mm. It includes a spindle diameter in the front bearing of 90 mm and a speed range of 0 - 3000 rpm. If you are looking to get high-quality turning capabilities, consider the KERN Status machine we have for sale. Contact us for further details regarding this machine. - Working Hours: 50,796 h- Turning Diameter over Bed: 400 mm- Turning Diameter in Gap: 460 mm- Turning Diameter over Slide: 230 mm- Max. Turning Length: mm- Spindle Diameter in Front Bearing: 90 mm- Spindle Bore: 50 mm- Speed Range: 0 - 3000 rpm- Gear Stages: 3- Feed Rates (Longitudinal & Facing): mm/rev- Thread Pitches: - mm/rev- Tailstock Sleeve Diameter: 60 mm- Tailstock Sleeve Stroke: 120 mm- Tailstock Inner Taper: MT4- Tool Holder System: Multifix- Voltage: 380 V- Frequency: 50 Hz- Nominal Current: 30 A- Control Voltage: 24 V- Included Accessories: Röhm 3-jaw chuck (Ø200), Röhm 3-jaw chuck (Ø300), steady rest Technical Specification Gusdpfx Aezx Snnjkaog Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2026, Engine power, three-phase: 5.5 HP 3 collection bags Suction capacity: 5,000 m3/h Suction inlet diameter: Ø 250 mm Filter sleeves: no. 27 – Ø 180 x 1,030 Filter area: 15 m2 Gujdezyf Nnopfx Akajg Inspection door Electric shaker Discharge outlet diameter: Ø 400 Noise level: 79.8 dB (A) Weight: 210 kg Dimensions of assembled machine: 750 x 2,780 x 2,580 mm

Condition: like new (used), TECHMI Automatic Filling and Capping Machine – Stainless Steel TECHMI automatic filling and capping machine, designed to integrate the operations of product dosing/filling and subsequent placement and closing of caps or capsules onto containers in a single machine, for use in industrial packaging lines. The equipment features a compact configuration with automatic container transport, filling stations, and a capping system, allowing both operations to be performed sequentially and automatically. Its enclosed design with transparent guards also provides safety and visual access to the work area. Primarily constructed from stainless steel, it is particularly suitable for professional installations in the food and packaging industries. MAIN FEATURES -Manufacturer: TECHMI -Type: Automatic filling and capping machine -Integrated operations: filling + capping/closing -Automatic operation -Continuous container feeding -Automatic positioning at workstations -Dosing/filling system -Automatic cap or capsule placement system Gedpfjx S E Spjx Akajug -Closing head -Automatic transfer between operations -Integrated infeed and outfeed conveyor -Primarily stainless steel construction -Control panel/HMI -Adjustments for format adaptation -Complete enclosure with transparent guards -Compact design for inline integration -Industrial construction for continuous operation PROCESS Containers enter automatically via the conveyor and are positioned at the different stations of the machine. In the first phase, the product is dosed into the container. Subsequently, the filled container is transferred to the capping section, where the cap or capsule is placed and closed. Once both operations are completed, the closed containers are automatically discharged to the next stage of the line. Can be integrated with: Container feeders Product preparation and feeding systems Cap feeders/orienters Conveyors Weight checkers Detectors and inspection systems Labeling machines Coders Case packers End-of-line equipment APPLICATIONS Particularly suitable for food industries, canning companies, sauce, cream, puree, condiment manufacturers, and other packaging companies that require automating filling and closing operations. The exact product configuration, dosing volume, container format, and cap type will depend on the equipment and format currently installed in the machine. The combination of TECHMI filling and capping in a single automatic unit provides a compact solution to reduce transfers between equipment and automate the packaging process. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), CUOMO AGM4 Automatic Can Seamer with 24-Valve Vacuum System The CUOMO AGM4 automatic can seamer is equipped with a 24-valve vacuum system, designed for continuous operation in industrial canning lines. It evacuates air from the headspace and then hermetically seals metal containers. The system combines a 24-valve rotary unit for vacuum operation with the automatic seamer, allowing the inside of the can to be conditioned before the double seaming process. This configuration is particularly suitable for canned products where it is necessary to reduce residual air and achieve an adequate vacuum in the sealed container. MAIN FEATURES -Manufacturer: CUOMO -Model: AGM4 -Type: Automatic can seamer with vacuum system -Vacuum system: 24 valves -Automatic and continuous operation -Automatic can feeding -Can treatment under vacuum -Reduction of air in the headspace -Synchronized transfer to the seamer -Automatic cap feeding and positioning -Mechanical sealing system -Double seaming -Automatic discharge of sealed cans -Construction primarily in stainless steel -Fairings and safety guards -Electric drives -Robust industrial design -Integrable into complete canning lines PROCESS Pre-filled cans automatically enter the 24-valve unit, where the vacuum operation is performed before sealing. This process reduces the amount of air in the can, helping to achieve the required vacuum conditions after sealing. Gsdpfx Aszxw Akskajug Next, the cans are synchronously transferred to the CUOMO AGM4 seamer. The lid is placed on each can, and the sealing mechanism performs the necessary operations to form the hermetic double seam between the lid and the can body. Once sealed, the cans can continue to: Can washers Seam inspection systems Weight checkers Autoclaves Pasteurizers Cooling systems Labelers Case packers Palletizers APPLICATIONS Particularly suitable for canning industries processing vegetables, fish, meat, ready meals, and other canned food products where it is necessary to control residual air and the can's vacuum before or during the sealing process. The compatible can formats and dimensions will depend on the tooling currently installed and the specific configuration of the machine. The combination of CUOMO AGM4 + 24-valve vacuum system provides an industrial solution for automatically performing the vacuum conditioning and subsequent hermetic sealing of cans. Machine available for inspection. Additional technical information, can formats, production speed, vacuum level, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), FMC 652 Automatic Can Seamer – Stainless Steel The FMC 652 automatic can seamer is designed for continuous, hermetic sealing of metal containers using a double seaming process in industrial production and canning lines. The equipment receives pre-filled cans, positions the lid onto each container, and mechanically performs the closing operations necessary to securely join the can body with the lid. Its automatic configuration allows it to be directly integrated with fillers, depositors, and other equipment in a canning line. MAIN FEATURES -Manufacturer: FMC -Model: 652 -Type: Automatic can seamer -Application: Metal containers -Automatic and continuous operation -Mechanical double seaming system -Continuous can feed -Lid feeding and positioning system -Synchronization between container input, lid, and closing operation -Motorized industrial drive -Adjustment according to installed format -Integrated control panel -Construction primarily in stainless steel -Protective casings in mechanical areas -Compact and robust structure -Designed for continuous industrial operation -Integrable into automatic canning lines PROCESS Pre-filled cans arrive automatically at the FMC 652, where they are separated and positioned for sealing. The corresponding lid is fed and placed onto the container body. Subsequently, the closing mechanism performs the successive operations necessary to form the double seam, creating a hermetic seal between the lid and the can. Once sealed, the containers are automatically discharged and can continue to: Can washers Seam inspection systems Weight checkers Autoclaves/retorts Pasteurizers Coolers Labeling machines Case packers Palletizers APPLICATIONS Especially suitable for canning industries processing fish, meat, vegetables, legumes, prepared meals, and other canned foods. Gjdpfx Akewn Dmdsaoug The compatible can diameters, heights, and formats will depend on the tooling and adjustments currently installed in the seamer. The FMC 652 is a compact industrial solution for automating one of the critical operations in a canning line: achieving a uniform and hermetic mechanical seal of the metal container. Machine available for inspection. Additional technical information, can formats, production speed, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, Overwrapping/Cellophane Wrapping Machine by Sollas Holland B.V., Model SOLLAS 20, Year of Manufacture: 2013 A compact, reliable packaging machine for high-quality cellophane/film overwrapping of individual products or bundles. Guodeyhc Dyjpfx Akajg Technical Specifications Machine type: Overwrapping/Cellophane Wrapping Machine Manufacturer: Sollas Model: 20 Control: PLC with touchscreen (Siemens or Rockwell) Drive: Cam/Servo Output: up to 50 cycles/min Operating pressure: 6 bar Air consumption: 4 nl/stroke Power consumption: 2.5 kW Max. film roll diameter: 320 mm Product size range (standard): Min.: 45 × 40 × 16 mm Max.: 300 × 200 × 96 mm Film material: PP, coated paper, common heat-sealable materials Machine weight: approx. 950 kg Machine color: RAL 9010 (white) Features Servo-driven film feed Cam mechanism – robust and low-maintenance Single-sided infeed and outfeed (single level) PLC control with touchscreen Trailing-edge seal system Quick format changeover (approx. 10–20 min) Low-cost exchange parts Compatible parts with Sollas 17 / 19 / S(X) series Options / Extensions Tear-tape applicator Print mark registration Film slitting Various feeding systems Stainless steel covers Special sealing (spot/stripe) Universal folding section Integration into upstream and downstream equipment (cartoners, case packers, banding systems, etc.) Operational Advantages Highly reliable technology Compact design Flexible format ranges Quick changeover Ideal for small to medium production runs Low operating costs Proven industrial solution with worldwide spare parts availability Condition Used Technically inspected Fully functional Ready for immediate use More photos and videos available! Shipping terms: ex location, loaded free of charge Loading: possible by forklift Transport/disassembly: can be organized Contact If interested, simply write or call: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Subject to prior sale and errors All prices net plus VAT

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 87A, total width: 2,400 mm, total length: 10,500 mm, total height: 2,300 mm, cutting length (max.): 670 mm, type of input current: three-phase, overall weight: 9,000 kg, Holweg RS2 (42GL) Year 1988 Brand: Holweg Model: RS2 (42GL), modified for standard single-channel RS21 operation Year: 1988 For the production of flat-bottom paper bags, with or without gusset. Machine overhauled: new electrical components, new 3-phase main motor with frequency inverter, unwind station with new Renova Italy electronic brake system and dancer roller. Equipped with inline 4-color flexographic printer model IS 80, maximum print width 800 mm. Printing sleeves included: 4 x 220 mm, 3 x 320 mm, 1 x 370 mm, 1 x 380 mm, 4 x 400 mm, 4 x 430 mm, 4 x 440 mm, 1 x 520 mm, 3 x 520 mm, 3 x 580 mm, 6 x 660 mm, 3 x 680 mm. Gears: - 320 mm: 4 printing gears + 2 machine gears - 340 mm: 4 printing gears + 2 machine gears + 1 printer gear - 380 mm: 4 printing gears + 2 machine gears + 1 printer gear - 440 mm: 4 printing gears + 2 machine gears + 1 printer gear - 520 mm: 4 printing gears + 1 machine gear - 580 mm (290): 4 printing gears + 2 machine gears + 1 printer gear - 680 mm: 4 printing gears + 2 machine gears + 1 printer gear Forming plates: 1 x 90 mm, 1 x 120 mm, 1 x 140 mm, 1 x 150 mm, 1 x 170 mm, 1 x 180 mm, 1 x 200 mm, 1 x 240 mm, 1 x 300 mm. Note: Gluing knives for different bag widths are not included. Printer shafts/adapters: 4 printer shafts included, compatible with the printing sleeves listed above. Gujdpjy Iclxsfx Akaog Perforation type. Max unwinder diameter: 1,200 mm Pneumatic shaft: 70 mm Max paper width: 900 mm Min–max bag width: 70–340 mm (current owner produced only one bag size: 140 mm width x 260 mm length) Cut-off length: 190–680 mm Min–max bag length: 180–670 mm Working speed: 400–800 bags/min (depending on bag size) Suitable paper: 30–70 g/m² Machine can be inspected in operation. Immediately available.

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross Godpjw U Eg Rjfx Akajug sled available !!