Used Soco System Förderbreite 355 Mm for sale (83,171)

Condition: used, axle configuration: 3 axles, first registration: 08/2005, total length: 12,650 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,210 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Tyre tread left: 30%; Tyre tread right: 30% Rear axle 3: Steered; Tyre tread left: 40%; Tyre tread right: 40% Weights Unladen weight: 7,390 kg Payload: 31,610 kg Gross vehicle weight: 39,000 kg Functional Loading platform height: 130 cm Condition Damages: none Identification Blsdsy Szyijpfx Aprsh Registration number: OH-84-ZK

Condition: new, Warehouse stage 4,000 x 10,000 mm, capacity 500 kg / m ² Included in the scope of delivery: Bodpfx Aed Hl Nisprjlh 4 stand, on one side of 100 x 100 x 3 mm 2 stand, double-sided 100 x 100 x 3 mm 4 main beam C + 300 x 3 x 3,990 mm 10 crossbar S + 300 x 2 x 4,800 mm 20 mounting bracket 3 cross associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 10.000 mm Floor area: 40 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm Crossbar: Sigma profiles S + 300 x 2 mm Flooring: 38 mm chipboard, one side white Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings, etc. are not included, but can be supplied at an additional cost. (Prices on request)

Condition: new, Warehouse stage 8,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions surface: 8,000 x 5,000 mm Floor area: approx. 40 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 6 steel tube supports 100 x 100 x 3 mm 4 main beam C + 300 x 3 x 3,990 mm (perforated) 9 cross bar S + 300 x 2 x 4,800 mm (closed) 18 mounting bracket 3 cross associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Stand either in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (Other colours on request!) Galvanized main and cross members We manufacture the storage platforms to any other desired measurement. Prices on request! Accessories, such as stairs, railings, etc. are not included in the scope of delivery. Bsdpfx Aped Htr Hsrslh These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: new, Warehouse stage 16,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions surface Max: 16,000 x 5,000 mm Floor area: approx. 80 m ² Bledpod Htr Tjfx Apreh OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 10 stand on one side of 100 x 100 x 3 mm 8 main beam C + 300 x 3 mm, L = 3,990 mm 18 crossbar S + 300 x 2 mm, L = 4,800 mm 36 bracket 4 Cross associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Stand either in the following standard colours: RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: new, total length: 5,000 mm, total height: 3,000 mm, total width: 4,000 mm, load capacity: 500 kg, Warehouse stage 4,000 x 5,000 mm, capacity 500 kg / m ² Included in the scope of delivery: 4 stand, on one side of 100 x 100 x 3 mm 2 main carriers C + 300 x 3 x 3,990 mm (perforated) 5 crossbar S + 300 x 2 x 4,800 mm (closed) 10 mounting brackets 2 cross associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm (perforated) Crossbar: Sigma profiles S + 300 x 2 mm (closed) Flooring: 38 mm chipboard, one side white P6 Support in the following standard colours: RAL 7035, light grey Blsdpfx Aod Hl D Deprsh RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost.

Condition: new, total length: 12,000 mm, total height: 3,000 mm, total width: 5,000 mm, load capacity: 500 kg, Warehouse stage 12,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions surface: 12,000 x 5,000 mm Floor area: approx. 60 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Blodpfod Htr Rsx Aproh Included in the scope of delivery: 8 stand on one side 100 x 100 x 3 mm 6 main beam C + 300 x 3 mm, L = 3,990 mm (perforated) 13 crossbar S + 300 x 2 mm, L = 4,800 mm (closed) 26 mounting bracket 3 cross associations 24 Particleboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Stand either in the following standard colours: RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members We manufacture the storage platforms to any other desired measurement. Prices on request. Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Runs shelf inspection according to DIN EN 15635 n

Condition: new, Warehouse stage 4,000 x 15,000 mm, capacity 500 kg / m ² m delivery are included: 4 stand, on one side of 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6 main carrier C + 300 x 3 x 4.190 mm 15 crossbar S + 300 x 2 x 4,800 mm Bljdpfxjd Htryj Aproh 30 mounting bracket 4 Cross associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor space: 60 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm Crossbar: Sigma profiles S + 300 x 2 mm Flooring: 38 mm chipboard, one side white Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without the e.

Year of construction: 2025, condition: new, RC1100G5 FREE SHIPPING TO EUROPE Product from Serbia 100%. 1. Platform diameter: 1100mm 2. Maximum height : 650mm (from platform to nozzles) 3. Maximum load : 350kg Blodpfx Ajgd Ucgepreh 4. Pumps : 2 pumps, each to 2,2kW 400L/min 3,7 bar. stainless steel AISI304 5. Special shape of laser-made nozzles (The best ratio of pressure and width of the jet) 5. Platform drive : Step SERVO MOTOR with with collision detection 6.Heaters : 2x(2x3kW) = 12kW stainless steel AISI304 7. Cover sensor: YES 8. Liquid sensors : YES 9. Platform overload detection : YES 10. Oil skimmer : YES 11. Digital control unit with color screen, 3D notifications, time regulator (up to 80 min.) and temperature regulator (up to 80C) 12. Transport box : Safety wooden packing. WARRANTY 24 months ----- We also offer smaller machines from this series with a platform diameter of 700mm and 900 mm ----- 35 YEARS OF EXPERIENCE IN THE PRODUCTION OF AUTOSERVICE WASHING EQUIPMENT

Condition: new, Year of construction: 2026, MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM Bljdpfx Apey Hb U Norsh FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Year of construction: 2026, condition: new, functionality: fully functional, ERFOR GR7 Granulator – Efficient Plastic Recycling Solution We offer the ERFOR GR7 granulator – a robust and efficient machine designed for producing high-quality regranulate from plastic materials. An ideal solution for companies looking to process production waste and reduce raw material costs. Key Information: Throughput: up to 700 kg/h Materials: LDPE, HDPE, PP (films, production waste, printed materials) Stable, continuous operation High and consistent granulate quality Simple and reliable operation Equipment: High-performance plasticizing unit Automatic filtration system Granulation system Compact, industrial design Why GR7: Fast return on investment Bjdpjy Eyrdefx Aprelh Reduced material losses Reliable and long service life Configurable to customer needs Condition: New / built to order Manufacturer: ERFOR / Koltex PRS Contact us – we will configure the machine for your material and required capacity.

Condition: used, axle configuration: 3 axles, first registration: 01/2012, color: other, Year of construction: 2012, Empty weight: 6.690 kg Axle 1: left 4 mm right 10 mm Blodpfx Apjyxrf Ajrsh Axle 2: left 5 mm right 10mm Axle 3: left 10 mm right 12 mm

Condition: good (used), Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR350 Scope of delivery includes: 01x Pallet rack beam, used Material color: blue Beam type: TRN1-270-08-l INP profile: 80 x 42 mm Connector: 5 HK (hooks) Clear span: 2,700 mm 02x Locking pins, used Version: fully galvanized Bjdsy Am Dzepfx Aprelh For securing the beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipping of this item is required, additional costs will apply, which can be provided separately depending on delivery location and scope.

Condition: good (used), Technical data for pallet rack beams: Racking system: META Thyssen Included in delivery: 01x pallet rack beam, used Color: yellow Beam type: HN 100|20 Box profile: 100 x 50 mm Connector: 3 HK (hooks) Clear width: 3,600 mm 02x safety pins, used Finish: fully galvanized For securing the cross beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Bljdpfx Apjy Akh Rjrjh This item is offered for collection only. If transportation or shipping of this item is required, this will incur additional costs, which can be requested from us separately depending on place of delivery or scope of order.

Condition: excellent (used), Year of construction: 2020, operating hours: 28,257 h, machine/vehicle number: 52011345674582, load capacity: 350 kg, overall weight: 7,490 kg, product width (max.): 2,520 mm, working height: 30,000 mm, enginetype: Diesel, manufacturer: SYSTEM LIFT Bljdpfjx A N Rusx Apreh

Year of construction: 2026, condition: like new (used), Drip tray MRA system type WO 1000-001 Length 1450 x 1450 Height 530 Bledpfxeyzmmme Apreh

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) Bjdpfx Ajmhhypoprolh - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Bljdpfxomhh Dhs Aprjh The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Bledemhh Dzjpfx Aprjh - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg Blsdpsmhhx Ijfx Aprsh - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Bljdpfx Apemhhyasrjh Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg Blodsh Ek Daepfx Aprsh - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Bedpfx Aomhh Anjprjlh Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg Bledpfxsmhhf Se Aprsh - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Bledpfx Asmhhl Heprsh Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) Bedpfxomidyfj Aprolh - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.