4
Second hand machine
Used heating plant of the company Nestro/Fröling type Lignothermic with discharge
Lignothermic 100 kW boiler for wood chips and pellets firing
backfire flap between rotary feeder and stoker screw
Overfill protection for rotary valve or screw
Rotary valve MLD 150 up to 200 kW / d= 150 mm /
Room discharge type Kapa 501 GA/3 suitable for silo diameter 3 m
overfill protection
Briquette crushing screw KAPA GA
Drop chute with thermal discharge safety device 55 degrees
C...
2
We are selling our wood chip heating system.
The heating system is currently still in operation. It will be replaced with a new unit in November.
Cecalrmakf
The plant was built in 2009 and has been in continuous use since then.
If you have any questions, please call us.
Wood chip heating with 280 KW heat output
Fireclay renewed 4 years ago
0o92yv8b
with discharge as push floor
14
It is a wood-chip heating system installed in the container. It can therefore be installed with maximum convenience at any location.
Heat output: approx. 900 KW
Fuel: wood chips, bark, other wood waste
Moisture content: 15-60%.
Medium: Hot water.
Charging: hydraulic feed through pre-drying channel.
Firing: moving grate
Gwljgc
ash removal: fully automated
Control: fully automated
The system has been professionally maintained by us and is fully operational. It is being replaced because our heating...
3
HEAT PRESS 3D Vacum brand new, never used, can be used for vacuuming 12 mugs or plates, phone cases, etc. heating power: 2900W, 13/26A, 50/60HZ, 230 V, weight: 20 kg, external dimensions: 68 x 61 x 37 cm, vacuum space size: 42 x 30 x 10 cm
Q7bbh
a. Band Width: 29mm
Hcqirxwpe
b. Min Pack Size: 20mm wide x 2mm high
c. Max Pack Size: up to 420mm wide x 210mm high
d. Speed: 26 pack per min (approx.)
e. Footswitch
f. Automatic threading of new tape roll
g. Adjustable banding tension
h. Adjustable temp control
i. Audible warning when banding complete
j. Product position back plate and side guide
k. Uses paper or film tape
PVC coating painting line
Constrcution year - 2021.
Only 900 working hours !!
Cf87chibi8
Duplex booth for powder application, filter group and static gun, Duplex gem.
Rail distribution with a load capacity of 1500 kg at one point.
The oven is 3.2m long, 2m high and 1.8m wide.
The furnace has two cross burners, each of 37 kW, four fans that distribute the air in the furnace, a control part with timers and a signal alarm.
12
Capacity: 150 t/h
Screens: 1
Drive: 1,5/3 kW
Manufacturer: Wynveen
Gyah0g
Model: 47-31
Wynveen Rotary screen 47-31 with screw conveyor. In very good condition.
- Capacity - 150 t/h
- Screens - 1
- Drive - 1,5/ 3 kW
Screw conveyor:
- Length - 4,25 m
- Width - 1 m
- Height - 1,1 m
- Electric motor - 11 kW
Wynveen Cryloc Rotary screen is suitable for raw materials prior to grinding, pellets and crumbs, extrudates and expandates Maximum pellet diameter is 12 mm.
Features:
- compact design
- vibratio...
8
Heat exchanger / SPIRAFLO.
Inkfh39
Type - XTSD 104/64-6-304/316-C
Is made in 304 and 316 steel.
Year of manufacutre - 2013.
Empty weight - 2.000kg.
Total dimensions - Length - 700cm. Width - cirka 235cm. Height - 200cm.
3
Type: Boiling Kettle for immersion of heat-shrinkable foil
Manufacturer: Roschermatic
Dimensions of the machines in cm:
Width: 65
Depth: 65
Height: 120
Electrical power: 9 kW
Mx8yss
2
Capacity: 240 hl/h 2 stages
Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm
Operating pressure: 23 bar
Cf0wd20q3e
Length: 2000 mm
Width: 700 mm
Height: 2000 mm
6
operating pressure: 10 bar
voltage: 400/50 V/Hz
control voltage: 24 V
total power requirement: 0,76 kw
weight of the machine approx.: 160 kg
space requirements of the machine approx.: 0,58x0,68x1,35 m
heat exchanger
application area: transportation of heat energy from a medium to another medium (liquid or gas)
Tpsv9tou0
connections 3/4" for flow/return 2x both sides
2 Pieces available
1
the tunnel TWIN 50 has been designed to solve the needs to pack small product at high speed with great technical and esthetical results. Double heating chamber, double heating regulation, excellent thermal insulation, high speed belt and high speed shrink, great air flow control makes this shrink tunnel the perfect tool to solve any kind of shrink problem with the maximum efficacy
MAX power installed 14,5 kW (400V)
MAX product size 400 x 190 mm
(The maximum length depends on the shape, conveyor...
3
Fan heater, heater, gas heater, heat exchanger, air heater
-Power: 274 kW
-Volume flow 6.11 m³/s
D8i7adp
-Motor power 10 kW
-Dimensions mm
-Weight kg
5
* General * SKU345S1087 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Cfk7q9bbpa
3
General Location Bremen Condition used
Heat exchanger Technical documentation Drawing Exchange area 3.5 m² Last use Pharmacy Type plate Year 2000 Insulation available Material insulation jacket stainless steel Insulation material mineral wool
Shell space Volume shell space 38 liters Material shell AISI316 (V4A) 1.4571 Max. permissible operating overpressure shell space 6,0 bar Max. permissible operating temperature shell space 140 °C
Hausgpr
Pipe chamber Volume of pipe chamber 8 liter...
3
Permissible pressure: 16 bar
Cf0xm93zio
Permissible temperature: 100 °C
6
Chip conveyor TSUBAKIMOTO Type D45W6ST-TN
Serial No. MF 8473 Year of construction approx. 1990
metal link width 140 mm
metal link distance 380 mm
length of possible chip removal 900 mm
insertion length 1120 mm
insertion width 265 mm (without hopper)
insertion width 340 mm (with hopper)
insertion height 220 mm
Conveying height - ejection height approx. 550 mm
Belt speed 3 m/min.
Motor power belt drive 0,2 kW
Mains connection 400 Volt, 50 Hz
- Forward and reverse running of the scraper chain
- dri...
6
Vötsch heating and drying oven
Here we offer a Vötsch heating and drying oven.
Very low operating hours: only 267 h!
Heating and drying ovens VTL
Drying of flammable materials
In processes such as drying of surface coatings,
Cgtzpb029x
and impregnating resins, the released substances (e.g. solvents) can accumulate with air
can accumulate with air to form an explosive mixture.
If an ignition source is present at the same time, an explosion may occur.
Microprocessor-controlled
Temperature and Pro...
6
Heat exchanger, cooling coil, cooling pipe, cooling spiral
-Heat exchanger: cooling coil with fins
-Dimensions: see photos
Cfgbnzviph
-Transport dimension: 370/130/H110 mm
-Weight: 1.6 kg
3
* General * SKU212T509 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Bf2mtbma
11
Chip centrifuge make STEIMEL type S 7
Machine # 18704209 Year of construction 1987
Technical data:
Drum diameter 700 mm
drum capacity 130 l
max. charge 180 kg
Charg/ hours 10
drum speed 735 rpm
wall thickness 10 mm
material M ST 37
operating voltage 380 V
Connected load 25 A
outer dimensions L x W x H approx. 900 x 1200 x 1300 mm
with
- lid electrically locked
- time switch
used
Flu0e08e0
centrifuge for batchwise operation for deoiling,
drying, rinsing and coating of industrial goods.
1
Capacity: 790 hl/h hot-water production
Operating pressure: 8 bar
Cf03qtsj7t
Desing temperature: 100 °C
6
Tipping container, tipping container for forklift truck
chip bucket - dump bucket - collapsible container
load capacity: ca.1000 kg
volume: 1 m³
drive-in handle: 230 x 110 mm
Chsgulke
fork spacing inside/outside: 160/600 mm
- manual tilting device via hand lever
- 4 pcs. plastic fixed castors Ø 175 and, 2 pcs. steerable
- foldable drawbar
- drive-in handle/forklift pick-up
dead weight: 220 kg
length: 1700 mm
width: 1060 mm
height: 1500 mm
good condition
Suitable for collecting, storing and trans...
5
General Location Bremen Condition used
Cgowml7hqq
Heat exchanger Technical documentation Drawing Exchange area 16,0 m² Last use Pharmaceutical chemistry Nameplate
Shell space Volume shell space 128 liters Material shell AISI316 (V4A) 1.4435 Max. permissible operating overpressure shell space 6.0 bar Max. permissible operating temperature shell space 100 °C
Pipe chamber Volume Pipe chamber 120 liters Material pipes AISI316 (V4A) 1.4435 Max. perm. operating temperature pipe chamber 100...
6
Heat exchanger, cooling coil, cooling pipe, cooling spiral
-Heat exchanger: cooling coil with fins
-Dimensions: see photos
Cfgbtfknxz
-Transport dimension: Ø65 x 365 mm
-Weight: 0.5 kg
5
* General * SKU403S963 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Cfk22knmzm
1
The EAGLE 850 model is a heat-shrinking chamber machine that seals and heat shrinks the products in a single step. An ergonomic machine that is simple to use and versatile. It is the ideal solution for most packaging uses of large-sized products with film made of POF - Polypropylene material (with a thickness of no more than 50μm).
2uy7pa
Characteristics:
Dimensions of the sealing bars: 840x590mm
Max width of film reel = Ø300 x 800 mm
Machine dimensions (with open cover): 1950x1000x1480mm
Machin...
7
Capacity: 4 t/h
Heating capacity: 2609 kW
Operating pressure: 13 bar
Operating temperature: 195 °C
Power: 12,5 kW
Cf0yocpjx7
Voltage: 400 V
Frequency: 50 Hz
Features: Oertli Burner TD 4.450 ME; Fuel: natural gas; Economiser
6
Flame heating device Roland Groß Söhne GmbHRing burner for heatingType 1 x 1" IonisationFabr. No. ALMA 01 Year of construction 03/2010Connection voltage: 230 VoltPe gas max.: 500 mbarPe air max.: 10 barVgas max.: 30 Nm3/hVluft max.: 300 Nm3/hIncluding 10 pieces of different flame ring nozzles - flame monitoring Hans Henning ring nozzle hinged out of 2 half shells, inside Ø 310 mm, with hose plug coupling and ignition device, air outlet front ring nozzle hinged out of 2 half shells, inside Ø 4...
3
General Location Bremen Condition used Other Standard drawing available; information on exchange area from last operator (can be recalculated if required).
Heat exchanger exchange area 10,0 m² last use pharmaceutical chemistry material flanges steel
Shell space Material shell AISI316 (V4A) 1.4429
Technical data / dimensions Diameter inside 350 mm Total length 2,835 mm
9nylmuo
6
Heat exchanger, cooling coil, cooling pipe, cooling spiral
-Heat exchanger: cooling coil with fins
Cfbyvm2w
-Dimensions: see photos
-Transport dimension: Ø60 x 290 mm
-Weight: 0.4 kg
5
* General * SKU316S539 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Jff3ovp
8
Cooling capacity: 48 kW (12/7 — 35°C)
Heating capacity: 48 kW (40/45 — 7°C)
Year of manufacture: 2020
Options: heat pump
Refrigerant circuit: 2 pcs.
Type of refrigerant: R-410A
Heat exchanger: Plate
Compressors: 2 pcs. Danfoss (scroll)
Q7pvb
Number of fans: 4 pcs.
Dimensions: 2.44 x 1.20 x 2.00 m
Weight: 850 kg
Working hours: 88 / 79 h
Condition: excellent
1
- NEW -
Mobile device for a chip-free workstation
- For extracting milling, planing and sawdust
- For more efficiency of woodworking machines and the
Vt0kbq
Maintaining the health of the user
- Fan blade in blade shape for high suction power
- High mobility due to standard driving device
- Easy fixation of bags with straps
Characteristics:
Fan and housing made of plastic
Technical specifications:
Extraction nozzle Ø on the device 100 mm
Extraction nozzle Ø at distributor 100 mm
Motor power 0...
6
Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17
Ident. No.: Order No.: 915979 Year of construction 1992
metal link width 200 mm
distance of driving bars approx. 380 mm
length of possible chip removal 1100/2100 mm
insertion length approx. 1350 mm
insertion height 370 mm
insertion width 460 mm
Hopper width top 400 mm
hopper width bottom 170 mm
Conveying height - ejection height approx. 1250 mm
Motor power belt drive 0,37 kW
Mains connection 400 Volt, 50 Hz
- drive of the scra...
4
General Location Bremen Condition used Other Standard drawing available; Material of foreheads: 1 4429 (V4A); Specification of replacement area from last operator (can be recalculated on request).
Heat exchanger exchange area 10,0 m² last application pharmaceutical chemistry material flanges steel
Q7pql
Shell space Material shell AISI304 (V2A) 1.4301
Technical data / dimensions Diameter inside 350 mm Total length 2,820 mm
6