Used Softforming Interchangeable Profiles for sale (6,327)

Condition: new, functionality: fully functional, overall weight: 16,000 kg, maximum load weight: 13,700 kg, empty load weight: 2,300 kg, loading space width: 2,480 mm, loading space length: 7,750 mm, loading space height: 3,000 mm, machine/vehicle number: Produktpalette, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Tandem Trailer Chassis Welded steel construction with a floor assembly approximately 152 mm high; load-bearing and torsionally rigid steel frame construction. Longitudinal beam floor construction with a load-resistant outer frame and guide tunnels spaced 600 mm apart; tunnels feature guides on top and sides, tunnel height approx. 45 mm; 4 x swap body corner fittings based on a 20-foot standard. 4 side-extending/folding parking feet with dual locking mechanism for a parking height of 970 mm, with support leg rest Side door stops Rear impact protection made of flat bar Pallet stops on both sides, approx. 20 mm high with perforated profile for securing straps; loading height is reduced by approx. 20 mm Floor Screen-printed panels approx. 27 mm thick, for high point load capacity, for forklift axle load up to max. 4,400 kg Front wall/corner stanchions Approx. 2,580 mm high, remainder covered with tarp; steel corner stanchions in full-size design; release mechanism for side tarp on front wall Inner front wall additionally lined with a 1,250 mm high screen-printed panel Center stanchions 1 pair of sliding stanchions adjustable along the entire length, with 4-compartment pockets and a long pocket at the bottom. 1 pair of stanchion positions Slotting Slats 5 rows of wooden V-shaped slotting slats Rear wall/rear corner stanchions Rear steel corner stanchions extending to the bottom edge of the roof, tarpaulin attachment with round tube and tarpaulin tensioning ratchet Rear portal doors, double-leaf, each with 2 internal twist-lock latches Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps, reinforcements for stanchions Stainless steel tensioning fasteners Roof Sliding roof, rear end lift folds up, roof can be slid from rear to front, L-shaped roof rail for the automotive industry, interior width between roof rails approx. 2,490 mm, tarpaulin color: white EcoLift – lifting roof by approx. 380 mm, liftable on both sides, with gas spring assistance, Registration / Plates Country of registration: Germany Fliegl manufacturer’s certificate for body strength in accordance with EN 12642 XL, Fliegl manufacturer’s certificate for body strength in accordance with DL 9.5, pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm Fliegl manufacturer’s certificate for load securing in accordance with VDI 2700, Sheet 12 ff. Pallet stops on both sides, approx. 20 mm high; loading height is reduced by approx. 20 mm Paint Finish Frame Hot-dip galvanized, including passivation Cedpfx Ajkt Ni Uof Aerd Front corner posts Hot-dip galvanized Front wall Aluminum Rear corner posts Hot-dip galvanized Rear wall White

Condition: refurbished (used), Year of construction: 2023, Lengthwise and crosswise parquet line completely renovate with fully guarantee. Width min/max 80-400 mm Length min/max 500-3000 mm 4+4 motors per side Customized machine according to customer needs Crjdpslaxinsfx Af Ajd

Year of construction: 2009, condition: used, The machine is powered and can be inspected by appointment! Technical data / machine components: Year of manufacture: 12/2009 Manufacturer: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18-20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 tons Horizontal loading magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, 90 mm wide, for holding the profiles, with a pusher 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Depth, max: 2,380 mm, length: 7,400 mm Loading weight, max: 1,000 kg Conveyor length: 1,850 mm Profile length, min: 1,000 mm Profile length, max: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveyor speed: 4 m/min Material stop on the left Magazine "empty" sensor, manual cycling Tactile switch for the first loading 5 pneumatic cylinders for aligning the profiles in the longitudinal direction 6 lifting rollers for lifting the profile from the loading magazine and transferring it to the pusher Pusher, electronically positionable feed system: Reinforced design Feed length, max: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage: plate construction with ball bearing carriage Drive via linear motor, positioning via magnetic strip Pneumatic material gripper All 8 profiles can be automatically clamped without adjustment Repeat accuracy: +/- 0.15 mm Rapid traverse speed, max: 180 m/min Input of the profile tube length into the control system 1 light barrier for detecting the beginning of the profile before the first punching head Punching unit: Drive: hydraulic Punching force per cylinder: 3.0 t, designed for 55 punching cycles per minute Only a maximum of 2 tools can be in operation Vertical punching head with 2 cylinders Punching stroke: 15 mm including 2 punching tools for hole ø 6.5 mm, spacing 65 mm Punching cylinders can be selected individually, guide for the profile 2 horizontal punching heads Punching stroke: 15 mm including 1 punching tool each for hole ø 6.5 mm and 1 punching tool for oblong hole 7 x 12 mm, guide for the profile Cycling lubrication system with 4 nozzles for lubricating the punches 3 l oil tank, level monitoring Saw: Drive: 5.5 kW, 400 V, 50 Hz Saw blade: ø 500 mm Saw feed: pneumatic with hydraulic control, from below Pneumatic profile clamping device: vertical and horizontal Credpfxozbac Tj Af Asd Cycling lubrication system with one nozzle Flap after the saw for removing cut-off pieces and scrap, max. 200 mm length Parts fall downwards into the provided box Longer scrap pieces are disposed of with good parts Needle marking system: Character size: 2 – 7 mm Marking window: 80 x 20 mm, 15 characters including spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Condition: used, KABBERT Körnerpresse – Duct Corner Insertion & Press Machine A high-quality, German-engineered press machine specifically designed for the fast and secure locking of metal corner pieces into rectangular duct flanges. The Kabbert Körnerpresse replaces manual hammering, using a powerful mechanical press mechanism to lock the corner elements tightly into the profile joints for an airtight and rigid connection. Specifications Credpjzbqk Usfx Af Aod • Manufacturer: Kabbert GmbH (Germany) • Type / Model: Körnerpresse (Flange Corner Press) • Machine No. (Masch. Nr.): 310616 • Application: Inserting, pressing, and locking corner pieces into rectangular ventilation duct profiles. • Maximum Sheet Thickness (Blechstärke): max. 1.5 mm • Machine Weight (Gewicht): 50 kg Key Features & Components • Precise Corner Locking: Specifically designed to press and secure metal corners at the joints of profile flanges, ensuring a perfectly aligned and rigid duct frame. • High-Speed Assembly: Eliminates intensive manual labor and hammering, significantly speeding up the final assembly of rectangular duct sections. • Preserves Galvanized Coating: The cold-pressing technology forms a strong mechanical lock without scratching, burning, or damaging the zinc layer, maintaining full corrosion resistance. • Compact & Portable: Weighing only 50 kg, the machine is highly space-saving, easy to relocate, and fits seamlessly into any workshop layout. • Heavy-Duty German Quality: Built to industrial standards for reliable, repeatable, and trouble-free operation under daily workshop loads. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: new, Year of construction: 2026, functionality: fully functional, power: 148 kW (201.22 HP), filling opening width: 1,200 mm, filling opening length: 6,000 mm, number of blades: 150, rotational speed (max.): 80 rpm, rotor diameter: 390 mm, rotor width: 1,200 mm, Genox J1200 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 148kW combined shaft motor power (4 x 37kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Four 1200mm wide x 390mm diameter rotors with 150 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. Crjdpszh Eu Hefx Af Ajd We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 258.5 kW (351.46 HP), filling opening width: 2,000 mm, filling opening length: 7,000 mm, number of blades: 350, rotational speed (max.): 50 rpm, rotor diameter: 635 mm, rotor width: 2,000 mm, Genox J2000 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 240kW combined shaft motor power (75Kw + 3x55kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 50rpm shaft speed. Four 2,000mm wide x 635mm diameter rotors with 350 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Crodpfjzh Euyox Af Ajd Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture a 800mm & 1,200mm versions of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: used, TECHNICAL DETAILS screen Ø : 300 [mm] EQUIPMENT - 3 objectives (10x, 20x, 50x) - 2 axis display Cjdpsuhb Nlsfx Af Aerd

Condition: used, TECHNICAL DETAILS - Ø screen : 600 [mm] Crsdpfx Afjuhb Nfj Aod - Strokes (X/Y) : 200 / 100 [mm] - Magnification : 10X, 20x, 50x, 100x - power max : 1 [kW] - floor space (L x D x H) : 1100 x 1720 x 2100 [mm] - weight : about 400 [kg]

Condition: new, Year of construction: 2026, KRBS 101: Combined tube, profile, and belt grinding machine Convenient operation thanks to easily adjustable clamping device The rotatable clamping jaws of the clamping device enable secure clamping of square tubes, round tubes, and flat steel Adjustable grinding angles from 30 - 90° and from 0° - 60° The optimized quick-change holder allows the clamping roller to be easily and quickly replaced without tools Particularly durable thanks to larger and improved roller bearings Practical clamping roller holders integrated in the base Extensive range of clamping rollers for grinding various tube diameters available as accessories Quick changeover between tube grinding and belt grinding possible Powerful motor Almost all settings can be carried out without tools (operating tool included) Large, foldable protective screen with optimal field of vision Two belt speeds allow optimal adaptation to the respective material (15 m/s best for stainless steel and aluminum, 30 m/s perfectly suited for steel) With two easily removable chip collection containers Dust extraction port (Ø 100 mm) for dust extraction systems available Dust extraction systems available as accessories Further developed, vibration-reducing base Scope of delivery: 1 x Standard grinding belt, grit size K 36 2 x Chip collection containers 1 x Wrench Credpfx Afscnz Ays Ajd 1 x Grinding roller 42 mm Model: KRBS 101 Item No.: 3921001 Technical data Mains connection: 400 V Mains frequency: 50 Hz Motor power: 2.5 / 3.3 kW Grinding diameter: 20 - 76 mm Grinding angle: 30 - 90 ° (0° - 60°) Grinding belt (length x width): 2000 x 100 mm Belt speed: 15/30 m/s Dust extraction port diameter: 2 x 100 mm Dimensions (length x width x height): 1250 x 750 x 1140 mm Weight: 159 kg Location: Ex works - available for short-term delivery

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) Crsdpfx Afou Idnms Asd - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: new, input voltage: 230 V, - Shaft diameter 40 mm - Can be used horizontally/vertically - Foot control - Emergency stop - Includes 1 set of standard steel rollers Cedpfx Afelxw Rmo Asrd - Documentation - 230V

Condition: used, Spindle diameter 50 mm Spindle length 320 mm Motors 2 x 11 kW + 2 x 3 kW Credpfxelf H S As Af Ajd

Condition: used, Spindle diameter 50 mm Spindle length 320 mm engine 2 x 11 kW und 3 x 3 kW Cedpfx Afslf H Suo Asrd For profiling and milling windows, doors, individual parts, and similar items with circumferential profiles, including return transport. Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic. 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.

Condition: used, Year of construction: 1997, Weight ca. 4.000 kg control Sütron BT20 Number of boring spindles 4 St. WEINIG UNIVAR 10 automatic rebate unit from a UC-Matic window system, without function. Cjdpelf H Sqefx Af Ajrd - Suetron BT20 control unit - Machine incomplete - Details on request - Picture similar.

Condition: good (used), Year of construction: 1964, Profile bending machine. Produced by Girggio - ITALY - 1964. Type. PA-14. 8kW main engine. Csdpfx Afslbilrj Aerd Roller screw drive motor 5.5 kW. Dimensions L x W x H 2200 x 1300 x 1400 Weight approx. 3000kg.

Condition: used, shelf height: 6,000 mm, Technical data for pallet rack upright: Racking system: Dexion Type: Speedlock P90 Scope of delivery includes: Crodpfxsw I D Uto Af Ajd 01x pallet rack upright, used Material finish: Sendzimir galvanized Frame profile: 100|25 Profile dimensions: P 100 x 100 x 2.50 mm Including horizontal and diagonal braces, footplates The uprights are pre-assembled (bolted truss construction) Height: 6,000 mm Depth: 990 mm General information about the item: This item is only offered for collection. Any requested transport or shipping of this item will incur additional costs, which can be specified depending on the delivery location and required scope of delivery upon request.

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Csdpfxoidchcs Af Asrd Included in the scope of supply: 1x CS Sigma profile, used Material color: sendzimir galvanized Overall length: approx. 5,500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: good (used), The scope of delivery includes: 01x square tube, used Crsdpfx Aferxb R No Asd Material color: sendzimir galvanized Total height: approx. 5,560 mm Square profile: 140 x 140 mm Material thickness: 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm Note: Some of the square tubes are doubled at a height of 4,910 mm or 5,010 mm are doubled up. Currently available from stock: approx. 101 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the frame profile: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x frame profile, new Material color: Sendzimir galvanized Frame type: P73 Profile dimension: 75 x 75 x 2.0 mm Height: 10,694 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Codpfxex Dil Ue Af Asrd Mr. Falk Deutsch General information about this item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested from us depending on the place of delivery or the scope of delivery.

Condition: excellent (used), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Included in the scope of delivery: 1x CS Sigma profile, used Material color: Sendzimir galvanized Profile length: approx. 1,750 mm CS-Sigma: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Codpjhvz D Hsfx Af Asrd Weight/piece: approx. 7.950 kg Note: The angles shown in the image are not part of the offer. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply. Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelf systems. Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 01x steel girder, used Material color: sendzimir galvanized Box profile: 110 x 50 mm Total length: 4,000 mm Currently available in stock: 154 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation Crodpfx Aotpf Nyef Asd or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Technical data for the frame profile: Shelving system: Bito Type: PL 38 Credpfx Afsufw Acs Aed The scope of delivery includes: 01x frame profile, used Material color: sendzimir galvanized Frame profile: P 20 Profile dimensions: 90 x 65 x 2.0 mm Frame height: 2,475 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 1x support post, used Material color: blue Overall length: approx. 1,660 mm Cjdpfxek Uufxj Af Aord Profile dimensions: U: 70 x 30 mm Material thickness: approx. 2.00 mm Number of boreholes: 02 pcs. Borehole diameter: approx. 11 mm Footplate dimensions: approx. 130 x 130 x 3.00 mm Weight / piece: approx. 3.570 kg

Condition: ready for operation (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The stated price refers to the price per piece. The scope of supply includes: 1x CS Sigma profile, used Material color: cream white Profile length: approx. 2,200 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight per piece: approx. 10.500 kg The CS Sigma profiles may be bent and/or have slight damage or signs of rust. Our services at a glance: (Prices on request) Csdpegfbyzofx Af Aerd Assembly, installation our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 1x Sigma profile, used Material color: galvanized Overall length: approx. 850 - 1,050 mm Profile: CS300 Crodpfx Afshktdlj Ajd The Sigma profiles have been cut on one or both sides! There are different lengths and material thicknesses available, which will not be sorted. General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.