Softforming single-side Edge bander

HOMAG KAL 310 /8/E12 (Softforming)

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition. Djdpfx Aodzqb Eep Dowc

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dwjdewxdqkepfx Ap Dec Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm Dedjcl Svvepfx Ap Dowc -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 Dodpfx Aegwbbqjp Dswc N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles Dodpsdx Axfofx Ap Dswc • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton Dwodpfepbvqvjx Ap Djc N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: good (used), Year of construction: 1973, Weinig planer 4-sided / U250 / Unimat 250 planing width: 250mm Planing height: 120mm Spindle bottom 7,5 kW Dwsdpfx Apsrigq Se Dsc Spindle right 5,5 kW Spindle left 7.5 kW Spindle right 7.5 kW Spindle top 7.5 kW Spindle bottom 7.5 kW Spindle sawing unit 7.5 kW with planing heads with milling tools with knives with all accessories good condition - available immediately Location: Austria, near Sankt Pölten

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 IMPORTANT: Available from mid October 2026 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION MATRIX-PRO working table, size 4300 x 2250 mm - 4 pneumatically retractable stoppers w. sensor monitoring - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Dedpfxoztl N Ue Ap Dswc Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Dodpfxst Amc Ij Ap Dowc

Condition: excellent (used), AUTOMATIC MULTI-BORER "WEEKE" In line with another machine possible Numerical Control Power Control Software WoodWop (TOPDRILL BST 500) Through-feed motorized transport belts (No.) 2 (with adjustable speed) Horizontal units/supports (No.) 2 Drilling heads/Blocks for each horizontal unit (No.) 2 Spindles for each horizontal drilling head (No.) 11 Max. working width (mm) 3000 Min. working width (mm) 250 Djdpfsh Ryhnex Ap Dswc Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (No.) 2 Spindles for each drill head of the bottom vertical supports (No.) Various Top vertical units/supports (No.) 2 Drilling heads/block for each top vertical unit (No.) 2 Spindles for each drill head of the top vertical supports (No.) Vertical top pressure clamps (No.) 6 Transport belt to evacute chips (wastes) Quota (axes) digital display Total installed power (Kw) 26